Edge banding machine

HOLZ-HER Triathlon 1490

Condition: used, Edge banding machine wood Her Triathlon 360V Edge banding machine with jointing unit and corner rounding unit Beiyjpy Machine is FUNCTIONAL and ready for demonstration from PENSION/trade workshop Ex location joinery, as inspected NET € 5.000,00

Year of construction: 2006, Condition: ready for operation (used), Glue type: PUR glue, glue application system: cartridges, max. edge thickness: 25mm, max. workpiece thickness: 60mm, feed rate: 16m/min, min. workpiece length: 140mm, min. workpiece width: 60mm. Including various spare parts and Ligmatec return. Documentation available. On-site inspection is possible. Cwsmhu3Asy

Year of construction: 1995, Condition: not inspected (used), Connected load 380V 55A PMS control Pre-milling unit 1961 Magazine 1901 Glue station 1906 Printing unit 1926K Snipping unit 1916 Flush trimming unit 1962 Profile trimming unit 1966, 3 mm rounding up to 15 mm flush Rounding scraper 1927 Shaping trimming unit 1983 Buffing unit 1941 P33Lh8Ky Extraction 1x160 1x125 mm Compressed air connection 6 bar

Condition: ready for operation (used), Year of construction: 2006, Operating hours: 10,000 h, Functionality: fully functional, Feed rate X-axis: 16,000 mm/min, Total length: 7,180 mm, Workpiece height (max.): 57 mm, Total width: 1,100 mm, Edge thickness (max.): 8 mm, Total height: 1,550 mm, Overall weight: 3,000 kg, Type of input current: three-phase, Compressed air connection: 8 bar, Height adjustment type: electric, Input voltage: 400 V, Working height: 900 mm, Chip removal: 3 mm, The machine has the following additional features: - Very stable scissor parallel boom mounted on the machine itself - The bridge adjustment motor was replaced approx. one year ago - The feed motor was overhauled approx. 1.5 years ago - Joining unit up to 40 mm panel thickness -> two 45 mm jointing cutters with interchangeable diamond tipping Bida98Olao - Edges up to 57mm high can be approached - EVA and PU adhesive with almost zero joint -> fine squeegee - This results in an excellent holding force of the edge even with EVA glue. - An additional grooving unit is installed - A new CPU was installed over 10 years ago -> in this context, the operating hours counter does not fit - Total output of edging meters approx. 500,000m If you have any questions, please call us.

Condition: used, Year of construction: 1997, Second hand machine Year of manufacture: 1997 Condition: well maintained Equipment and technical data: Machine with PLC control Feed rate 12/16 m/min Edge feed for roll and strip material, automatic 1901 Adhesive application cartridge 1906 with sensing nozzle Printing unit pneumatic, motorized adjustment to edge thickness 1926 cross-cutting unit 2-motor, pneumatic swiveling 1918 Trimming unit rigid up to 30 mm 1962 Milling unit MOT 5 with multifunction flush, radius, chamfer 1966 Radius scraper 1927 corner copying 1983 Surface scraper 1964 Buffing unit 1944 Blowing nozzles Technical data: Workpiece thickness min./max.: 6/60 mm workpiece width min. 60 mm workpiece length min. 140 mm glueing thickness max. 13 mm weight: 1350 kg Machine dimensions: 5850 x 1000 x 1750 mm Location: Röllbach Availability: short term Df99R2C2Cz

Condition: good (used), HOLZHER Triathlon 1486 edgebanding machine Well equipped, possibility to check before buying NC controlled aggregates pre-mills glue application, glue patron pneumatic pre-application guillotine pressure rollers pre-cutting balls straight up-and-down cutters up-and-down milling cutters R1, R2 profile scroll earning corners flat cyclin Ul9U8Nperz polisher fluids top pressure belt Wrapping height max mm: 60 machine length 680cm feed rate max 16m/min machine in good condition, working is suitable for further operation

Condition: used, Year of construction: 2018, Used machine Year of construction 2018 571 operating hours Equipment: BASIC MACHINE AURIGA 1308XL 200 - 400 V / 50 Hz with motorized pressure bridge adjustment - Extendable workpiece support XL, distance 600 mm - Automation package Adjustment and control of the units on the control panel - iTronic - Adaptive pressure and glue quantity control automatic, program-dependent fine adjustment - Vertical top and bottom nesting tracing shoes for 1 trimming unit and radius scraper - Edge Control 19 control unit with 18.5" touchscreen 16:9 color screen - ECO MODE energy-saving mode, this energy-saving mode is an automatic standby mode - FG201 jointing trimming unit with 2 trimming heads for joining the panel edge - Milling cutter, diamond Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation, Air Stream System (HOLZ-HER / LEUCO patent) - Milling cutter, diamond Ø 70 x 64 x 30 mm, Z2+2, clockwise rotation, Air Stream System (HOLZ-HER / LEUCO patent) - Edge feeder 1903 automatic transport of rolls and strips - Glue application system Glu Jet GJ301 (2.3 kW, 50 Hz), automatic glue height adjustment (push-button nozzle) - GLU JET collecting container for collecting glue residues during the rinsing process - Pneumatic pressure unit 1912-3, first roller driven with pneumatic immersion control - GM 301 spraying device (release agent) after printing unit for wetting the edge with lubricant (recommended for processing high-gloss edges) - Cross-cut unit 1918 (60 mm) pneumatic, chamfer caps 0/10 degrees, pneumatic adjustment - Suction hoods for snipping unit 1918 - Multifunction trimming unit 1827 MOT4 for trimming the top and bottom longitudinal edge - Milling cutter, diamond Ø 56 / 60 mm, Z = 2, R = 2.0 mm counter-clockwise rotation, diamond-coated, fixed tool with CM technology - Milling cutter, diamond Ø 56 / 60 mm, Z = 2, R = 2.0 mm Clockwise rotation, diamond-coated, fixed tool with CM technology - Vertical tracing rollers pneumatic, adjustment of the vertical tracing roller by 0.1 mm - Pneumatic swivel device for trimming unit 1827 MOT4 - Corner copying unit 1832 (1 x 0.35 kW, 200 Hz, 12000 min-1), corner copying function up to 3 mm edge thickness - Milling cutter, diamond Ø 53 mm x 10 mm x 16 mm, Z = 3, R = 2 mm, with CM technology (LEUCO system) with integrated chip removal, for profile trimming unit 1832 - Scraper unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the feeler rollers - Chip box cpl. Ø120 1929+1964+FK701 BLACK EDITION - HW inserts for scraper holder, R = 2.0 mm (2 pcs. required) - Surface scraper FK701 with pre- and post-scraper for removing the adhesive residue Cccrbo8 - Spraying device 1856 for the infeed and outfeed area - Buffing unit 1940 (2 x 0.09 kW, 50 / 60 Hz, 1400 min-1) Availability: short term Storage location. Hochheim

Condition: used, Year of construction: 2016, Working dimension X: 3.620 mm Working dimension Y: 1.350 mm Working dimension Z: 210 mm Number of milling spindles: 1 Milling spindle liquid-cooled: Yes Main motor power: 12 kW Rotation speed max: 24.000 rpm Gpervs 4th axis: Yes 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Tool changer positions: 19 Disc tool changer: Yes HOLZ-HER Tool changer 7886 Pickup tool changing position: Yes Vertical drilling spindles: 10 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Cantilever machine: Yes Machine table: Pod and rail table Two rows of stops: Yes Workpiece support aids: Yes Number of consoles: 6 Positioning aid: Yes Laser setup aid: Yes Safety device: Safety mat Software: HOLZ-HER CAMPUS

Condition: excellent (used), Year of construction: 2005, Edgebander HOLZ-HER SPRINT 1321 - control panel - calibration - automatic edge magazine - cartridge gluing - pressure zone - end trimming - straight trimming - radius trimming (controlled) 7Yjg9Ts8Tw - radius scraping - corner copying - surface scraping - brushes

Condition: good (used), Year of construction: 1962, Functionality: fully functional, Machine/vehicle number: 6281, CHAIN TEMMER / chain cutter 220V Holzher universal cutting, mortising and milling machine Uq8Rbjtzlx Type FK Year of construction 1962 Complete with storage trolley on castors Also suitable for milling room door locks Machine fully functional and cleaned Spare chains available If required, a face plate inlet milling machine is also available for sale

Year of construction: 2022, Condition: used, Used machine Year of construction: 2022 Condition: Good E2Ppet3 Equipment and technical data: TECHNICAL DATA Workpiece size: X = 200 - 3200 mm (longer with additional support) Y = 70 - 1200 mm (= max. clearance dimension) Material thickness: Z = 8 to 70 mm Max. Milling dimension in X-direction without reclamping: X = 1500 mm Max. Milling dimension in Y-direction: Y = 985 mm / cutter radius Max. Horizontal drilling dimension in X-direction: H = 1168 mm Z-stroke: Z = 240 mm Maximum programmable speed: Vector speed: 68 m/min X = 25 m/min, Y = 60 m/min, Z = 20 m/min Incl. CAMPUS V7 EVOLUTION CAD/CAM software 1 x license incl. process simulation 1 software license secured via dongle. Milling unit 7830 Power: 10.3 kW (S6), air-cooled Vacuum system ECO, 1-circuit vacuum system, 8 m³/h Special equipment: Incl. upgrade: 21.5" 16:9 touchscreen Incl. hand-held control unit for remote control of the machine Incl. 7874 tool changer (for Clamex gearbox) Incl. XL drilling unit 7885, 19 spindles Incl. uninterruptible power supply - UPS Incl. automatic central lubrication Location: Hochheim Availability: short term

Year of construction: 2017, Condition: used, Used machine Year of construction: 2017 Equipment: GRUNDMASCHINE Tectra 6120 CLASSIC cutting length 3100 mm - Width stop cutting width 31000 mm, for SL 3100, welded steel construction - absolutely stable and torsion-free - Angled air cushion table and fence 1800, table size 1800 mm x 600 mm, permanently mounted - 2 support air cushion tables 1800, table size 1800 mm x 600 mm, permanently mounted - Feeding roller at the front (1 piece per table), prevents damage to the panels when loading and unloading - 5 workpiece clamps - floating design via a linear guide, the workpiece clamps can compensate for unevenness in the panels/packages - no pressure points on rollers - CUTCONTROL 2 control unit, 21.5"" TFT display" - Standard saw carriage 7.5 KW, 400 V 50/60 Hz - 4400 mm - EASY-PLAN - Dongle version, especially for quick and easy optimization of parts lists - OPTI-CUT software is based on office optimization Ullx7Uhp3B - OPTI-BASE optimization software for the office - 1 x office license - dongle version (USB hardlock) - Pneumatically controlled angle pressing device - infinitely variable up to 1200 mm - Program-controlled, path-optimized angle pressing device - infinitely variable up to 1200 mm - Automatic central lubrication, no maintenance required for lubricating the machine - EasyLabel - label printer for HOLZ-HER machines, label printer for direct connection to machine computer - Manual control unit for remote control of the machine for easier operation of the machine - Control panel cpl. standard monitor for Classic The vacuum lifting device shown in the picture is not included in the scope of delivery! (but can be offered as well) Availability: short term Storage location: Hesse

Condition: used, Year of construction: 2005, *Sale price-valid until 30.11.2024* Used machine Year of construction: 2005 Condition: Function tested Equipment and technical data: Milling aggregate 6 kW, water-cooled HSK 63 F tool holder Speed 1,000 - 18,000 rpm. Tool changer: 6-position lateral Drilling head: 9 vertical drilling spindles in 32 mm increments Horizontal drilling spindle: 1+1 Vertical drilling spindle: 1+1 Grooving saw in X-direction Control: Twin CAm 32 Vacuum pump 100 cbm/h Ysuzsrqr Incl. vacuum cups Travel distances: X-axis: 2,685 mm Y-axis: 1,095 mm Z-axis: 140 mm Weight: approx. 3,500 kg Availability: short term Storage location: Röllbach

Condition: used, Year of construction: 1989, *Sale price-valid until 30.11.2024* Used machine Year of construction: 1989 Condition: Functionally tested Equipment and technical data: Glue thickness max mm 20 Gluing height max mm 51 Roll material thickness max mm 3 Workpiece length min mm 140 Workpiece width min mm 60 Glue system 1906 cartridge Printing unit Trimming unit 1920 Flush trimming up to 20 mm Chamfer trimming Space requirement LxWxH mm 3150x1800x1375 Weight approx. kg 800 Location: Hochheim Qba903Zau Availability: Short term

Condition: used, Year of construction: 2008, *Sale price-valid until 30.11.2024* Used machine Year of construction: 2008 Edge Control with 18.5" touchscreen color screen 16:9 swivel control panel, program memory, motorized pressure bridge adjustment, Feed by means of transport chain, feed rate 8-18 m/min Extendable workpiece support, motorized adjustable infeed guide Joint milling unit 1961, Diamond jointing cutter in synchronous and counter-rotation, automatic adjustment to workpiece height Edge feeder 1903 Pre-capping up to 3 x 45 mm (depending on material) Glue application system 1905 Multi system Automatic glue height adjustment with touch-sensitive nozzle, Pressure regulator for regulating the cartridge contact pressure, use of PUR glues possible, Printing unit 1913 MOT, 1st roller driven Cross-cut unit 1918 with pneumatic adjustment Cross-cut saw can be tilted pneumatically, Multifunction unit 1824 MOT 4 with multifunction cutter Radii 1,2,3 mm Corner cutting unit 1832 Corner cutting function up to 3 mm edge thickness Radius scraper 1929 MOT 2 with motorized adjustment of the horizontal tracing rollers with pneumatic adjustment (separate top and bottom) Chip catcher box for radius scraper, Surface scraper 1964 for removing the adhesive residue for a clean glue joint with extraction hoods S0Avssca Spraying device 1856 for the infeed and outfeed area Buffing unit 1940 for finishing and polishing edges ----- Technical data ----- Edge thickness of rolls: 3 mm, Edge thickness of strips: 8 mm, max edge thickness corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness corner copying: 45 mm, min. Workpiece length: 180 mm, feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support plate Ø for edge material: 800 mm, Cross-cut blade for roll material up to: 3 mm, Heating time: 3.5 min, Power of jointing cutter: 2 x 2 kW, Cross-cut saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction nozzle for jointing trimming unit: 120 mm, Extraction nozzle for trimming unit: 70 mm, Extraction nozzle for scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Image of the operating hours is from a photo taken in 2022 Availability: short term Storage location: Solingen

Year of construction: 2009, Condition: used, *Sale price-valid until 30.11.2024* Used machine Year of construction : 2009 School machine; well maintained Dpfcsl Equipment and technical data: Working range X : 2500 mm working range Y : 1.287 mm Working range Z : 300 mm Milling unit 7830 main motor kW : 6.5 air-cooled Speed min/max rpm : 1000 - 18.000 Tool clamping system : HSK-F63 Tool magazine 7896 Tool changing stations : 8 traveling Drilling unit 7979: Vertical drilling spindles : 10; 6 in X-direction, 4 in Y-direction Drilling unit speed 1000 - 6500 rpm Horizontal drilling spindles X : 2 Horizontal drilling spindles Y : 2 Grooving saw : in X-direction Cantilever machine design : Yes Machine table : Console table Number of consoles : 4 Positioning aid : Yes Vacuum pump : Yes Vacuum pump capacity m³/h : 100 dxf interface : Yes Safety device : Light barrier Manual control unit : Yes Crosshair laser : Yes Control cabinet cooling : Yes Control system and software - HOLZ-HER CAMPUS - DIRECT CNC NC-HOPS CE mark : Yes Space requirement LxWxH mm : 7190x3870x2471 mm without control cabinet 5864 mm electrical connection 18-21 kW operating pressure 6 bar Compressed air requirement 300 l/min Suction capacity 5300 m³/h Suction nozzle 200 mm Weight approx. kg : 4.300 If the machine is set up freely, it must be retrofitted with safety fences! Location: Hochheim Availability: By arrangement

Year of construction: 2007, Condition: used, *Sale price-valid until 30.11.2024* Used machine Year of construction 2007 Version fence left, cutting length 3250mm, cutting width 3850mm, cutting height 85mm Saw blade diameter: main saw 350mm, scoring saw 180 mm ø Pneumatic pressure beam, adjustable pressure force Compressed air requirement 32 L/min / 6 bar per cutting cycle Switchable clamp pressure, from the control panel for sensitive panel materials. panel materials. Automatic cutting length limitation (sawing unit recognizes the end of the workpiece) Residual cutting device, clamps retract into recessed pressure beam. Width stop with precise rack and pinion drive 6 workpiece clamps in floating design, compensate for material tension. Cutcontrol 2 control unit with 15 TFT display, Windows 2000 operating system Floppy disk and DVD drive Control functions direct cuts or via optimized orders CP-OUT data import module (interface: customer-side) Production data acquisition for the necessary maintenance of the machine. EASY-Plan optimization software Graphical user interface with real-time display Parts list data: Element number, item number, piece, length, width Material data: Material length / material width / material thickness Number of pieces available Rotatability (grain) Material designation Type number Trimming Unlimited input of parts list data OPTI-PRO software Module for data transfer:Import of parts lists from user programs (carpentry package) and as CSV file Main saw: 11 kW, scoring saw: 2.2 kW Grooving device with 2 groove height settings Angle pressure device, left 2 air cushion tables with blower Equipment: Automatic central lubrication Feeding rollers on the support table Cutting unit Postforming unit (incl. scoring unit) Dppfpp Angle cutting unit Automatic scoring saw adjustment Sizing and trimming unit with 3 automatic stop positions CUTCONTROL 2 control unit with 15" TFT display with touch screen operation Manual control unit for remote control of the machine Label printer TLP 2742 Postforming circular saw blade ø 250 mm Availability: approx. November 2024 Storage location: Hesse

Condition: used, Year of construction: 2007, *Sale price-valid until 30.11.2024* Used machine Year of construction 2007 Equipment: - Manually adjustable infeed guide - Trimming unit 1961 - Edge feeder 1903 - Glue application station 1906 with touch-sensitive nozzle - Pneumatic printing unit 1816 - Snipping unit 1918 - Trimming unit 1942 M radius, chamfer, flush - Blowing nozzle complete - Scraper unit 1929 - Chip catcher box - Surface scraper 1964 - Extraction hood set -- Complete protective hoods Technical data: Total length: 5291 mm Workpiece thickness: min. 6 / max. 50 mm Edge band thickness depending on assembly: 0.4-5 mm Max. edge band height: 55 mm Edge band length strips: min. 350 mm Edge band protrusion/height per side: max. 3 mm Workpiece width: min. 60 mm Workpiece length: min. 180 mm Feed speed: 12.5 m/min. Extraction: Boicext97Tg Joint trimming unit: 900 m³/h Milling unit: 280 m³/h Scraper unit: 280 m³/h Static negative pressure: Joint trimming unit: 1490 Pa Milling unit: 1650 Pa Min. air speed: 20 m /sec. Milling unit connection diameter: 70 mm Scraper connection diameter: 70 mm Compressed air: 6 bar Availability: short term Storage location: Hochheim

Condition: used, Year of construction: 2001, *Sale price-valid until 30.11.2024* Used machine Bjvt8Ue0 Year of construction: 2001 Condition: Function tested Equipment and technical data: Milling aggregate 4.4 kW Tool holder HSK 63 F Speed 1,000 - 18,000 rpm water-cooled Tool changer: 4-fold lateral Drilling head: 9 vertical drilling spindles in 32 mm increments Horizontal drilling spindle: 1+1 Vertical drilling spindle: 1+1 Grooving saw in X-direction Control: Twin CAm 32 Vacuum pump 40 cbm/h Incl. vacuum cups Travel distances: X-axis: 2,685 mm Y-axis: 1,095 mm Z-axis: 140 mm Weight: approx. 3,500 kg Machine is delivered complete in all mechanical, electrical and electronic components and overhauled where necessary All guides checked; console guides replaced New PC control unit for the TWIN CAM control system All axis modules checked and serviced Location: Hochheim Availability: by arrangement

Condition: used, Year of construction: 2011, *Sale price-valid until 30.11.2024* Used machine Used edge banding machine of the company Holz-Her type Arcus 1334 Machine completely overhauled and serviced Year of construction: 2011 MNo.: 220/1-105 Technical data: Feed speed infinitely variable 10-18 m/min edge control 19 with 18.5" touchscreen color display Hjt00Sp Jointing unit Edge feeding Glue application station Cartridge, scanning nozzle with automatic glue height adjustment printing unit Cross-cut unit Multifunctional trimming unit Copy trimming unit Radius scraper unit Surface scraper Buffing Workpiece thickness 6 - 60 mm Edge thickness 0.4 - 8 mm min. Workpiece width 60 mm shortest workpiece length 180 mm weight approx. 2200 kg Availability: short term Location: Hochheim Hochheim

Condition: used, Year of construction: 2002, *Sale price-valid until 30.11.2024* Used machine Year of construction: 2002 well-maintained condition (was serviced in 1/2023 before delivery) with convenient PLC control, display at eye level Programs and operating instructions in plain text All units can be selected individually Integrated operating data acquisition and fault diagnosis pivoting control panel, program memory, manual pressure bridge adjustment, feed by means of transport chain, feed rate 8/16 m/min Extendable workpiece support, motorized adjustable infeed fence Joint trimming unit 1961, 2x2.0 KW Diamond jointing cutter in synchronous and counter rotation, plunge path 5 mm Edge feeder 1903 Pre-capping up to 3 x 45 mm (depending on material) Automatic feeding of rolls and strips 1906 M glue application system with automatic reloading Automatic glue height adjustment with touch-sensitive nozzle, printing unit 1913 3 rollers 1st roller driven and pneumatically controlled Further pressure rollers can be pneumatically actuated Cross-cut unit 1918 Cross-cut saw pneumatically tiltable from 0° to 10 Multifunctional unit 1942 MOT 2 for flush radius and bevel trimming motorized adjustable Corner cutting unit 1832 Corner copying function up to 3 mm edge thickness Radius scraper 1929 MOT 2 with motorized adjustment of the horizontal tracing rollers Chip box for radius scraper, Surface scraper 1964 for removing the adhesive residue for a clean glue joint with extraction hoods Buffing unit 1940 for finishing and polishing edges ----- Technical data ----- Edge thickness of rolls: 3 mm, Edge thickness of strips: 8 mm, max edge thickness corner copying: 3 mm, Workpiece thickness: 6-45 mm, Workpiece thickness corner copying: 45 mm, min. Workpiece length: 180 mm, feed speed: 8/16 m/min, Distance workpiece support: 470 mm, Support plate Ø for edge material: 800 mm, Cross-cut blade for roll material up to: 3 mm, Heating time: 3.5 min, Power of jointing cutter: 2 x 2 kW, Cross-cut saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction nozzle for jointing trimming unit: 120 mm, Crxak0Krmt Extraction nozzle for trimming unit: 70 mm, Extraction nozzle for scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm, Location: Hochheim Availability: short term

Condition: used, Year of construction: 2010, *Sale price-valid until 30.11.2024* Ecyv9Vp3 Used machineCondition: 2010Condition: top overhauled!Feed speed infinitely variable 10-18 m/minControl edge control 19 with 18,5" touchscreen color screenFilling unit 1802Edge feeding unit 1901Glue application station cartridge 1906MG, with automatic glue height adjustmentPressure unit 1913 pneumaticCutting unit 1918Multifunction trimming unit 1826 MOT 6 with 6 servo axes for flush, radius and chamfer trimmingCopy trimming unit 1983Radius scraper unit incl. pneumatic adjustment 1929Surface scraper 1964Workpiece thickness 6 - 60 mmEdge thickness 0.4 - 8 mmmin. Workpiece width 60 mmShortest workpiece length 180 mmTotal length 5195 mmExtraction connection 180 + 80 mm, 2100 m³/hCompressed air connection 6 bar / 327 NL/minWeight approx. 2200 kgAvailability: approx. 2-3 weeks after order placementLocation: Hochheim

Condition: used, Year of construction: 2006, *Sale price-valid until 30.11.2024* Used machine Year of construction 2006 completely overhauled with new glue application system Equipment: - Manually adjustable infeed guide - Trimming unit 1961 - Edge feeder 1903 - Glue application station 1906 with touch-sensitive nozzle - Pneumatic printing unit 1816 - Snipping unit 1822 - Trimming unit 1942 M radius, chamfer, flush - Blowing nozzle complete - Scraper unit 1929 - Chip catcher box - Surface scraper 1964 - Extraction hood set -- Complete protective hoods Technical data: Total length: 5291 mm Workpiece thickness: min. 6 / max. 50 mm Edge band thickness depending on assembly: 0.4-5 mm Max. edge band height: 55 mm Edge band length strips: min. 350 mm Edge band protrusion/height per side: max. 3 mm Workpiece width: min. 60 mm Workpiece length: min. 180 mm Feed speed: 12.5 m/min. Extraction: Joint trimming unit: 900 m³/h Milling unit: 280 m³/h Scraper unit: 280 m³/h Static negative pressure: Joint trimming unit: 1490 Pa Milling unit: 1650 Pa Min. air speed: 20 m /sec. Milling unit connection diameter: 70 mm Crw0Sut3Rj Scraper connection diameter: 70 mm Compressed air: 6 bar Availability: approx. 2-3 weeks after receipt of order Location: Hochheim Hochheim

Condition: used, Year of construction: 2008, *Sale price-valid until 30.11.2024* Edge banding machine used Year of construction 2008 infinitely variable feed up to 30 m/min edge cross-section up to 15 x 65 mm (depending on aggregate) Space-saving sliding hoods Guide of the chain guide rail as round and flat guide Extremely thick and stable industrial chain for guiding the workpieces motorized height-adjustable pressure bridge Infeed area with motorized adjustable infeed level Two central suction connections Injection lubricator for automatic chain link, joint and pin lubrication Extendable workpiece support up to 1777 mm belt top pressure PPC 231 control unit Tql7Lueq Spraying device 1856 cpl. Joining unit 1961 (2 x 2 kW) Fully automatic edge feeding 1901 Glue application station 1905 Cartridge with scanning nozzle coupled to the pressure bridge Printing unit 1914 pneumatic and motorized 1 roller driven 3 holding pressure rollers Snipping unit 1918 60 mm, pneumatic swivel 10° bevel max. workpiece thickness 15 mm Milling unit 1826 manual multifunctional for flush trimming up to 8 mm, radius trimming up to 5 mm, chamfer trimming up to 6 mm edge thickness, panel thickness up to 60 mm, feed rate up to 30 m/min Shape trimming unit 1833 MOT 4 for processing the top and bottom as well as the front and rear edge protrusion edge protrusion equipped with r=2 mm Scraper unit 1927 motorized with r = 2 mm surface scraper 1964 Buffing unit 1944 Suction unit 2 x 200 mm Extraction capacity 3000 m³/h Compressed air connection 6 bar Total length 7290 mm total width 1372 mm Overall height 1705 mm Extensively overhauled in recent years: 1-new cylinder 1833-2016 2-New belt bridge 2017 3-new glue station 2018 4-New motors pre-milling cutter 2018 5-new guides 1833-2018 6-New transport chain 2020 7-new milling cutters 1833-1823-1918-2021 Availability: short term Storage location: Röllbach

Condition: used, Year of construction: 2011, *Sale price-valid until 30.11.2024* Used machine Year of construction : 2011 Condition: Functionally tested with new PPC-panel Glue thickness max mm : 6 Gluing height max mm : 60 Roll material thickness max mm : 3 Workpiece length min mm : 160 Workpiece width min mm : 65 Feed rate max m/min : 10 Glue system cartridge : Yes Glue system granulate : Yes Suitable for PUR glue : Yes Joint trimming unit : Yes Cross-cut saw unit : 2 motors Flush/radius/bevel stations : 1 Corner copying unit : 1 motor Scraper unit : Profile and flat Strip magazine : Yes Cycled units : NC axis(es) Design : Left-hand machine 1903 : Yes 1827 MOT4 : Yes 1832 : Yes 1929 MOT2 : Yes Control and software - HOLZ-HER EDGECONTROL CE mark : Yes Declaration of conformity : Yes Total connection kW : 7,60 Gxb8Fe3 L x W x H 4630 x 1411 x 1698 mm Weight approx. kg : 1,235 Location: Hochheim Availability : short term