11 bar tank 250 liters

KAESER

Condition: used, Year of construction: 2004, Technical details: length: 6006 mm width: 2440 mm height: 2590 mm motor power: 22 kw sound level: 66 dB(A) rated capacity: 22 KW operating pressure: 8.0 bar revolutions per minute of the motor:: 2.945 U/min temperature range: 3 - 45 °C weight of the machine ca.: Auf Anfrage t 20-foot container Kdodeyx Tnrepfx Aiior Compressor station – sound-insulated container with 2 compressor units 2 units SPX Hankison GmbH Type HHL 450 – a compressed air adsorption dryer (desiccant air dryer) for industrial compressed air systems. It is used to remove moisture from compressed air to prevent corrosion or freezing in machines, valves, or pneumatic systems. SPX Hankison HHL 450 Manufacturer: SPX Hankison Type: HHL 450 Design: Heatless desiccant dryer Max. operating pressure: 16 bar Connection: 2" NPT Series: HHL / HHS / HHE compressed air dryers These units operate with desiccant material (adsorption granulate) that binds water vapor from the compressed air. *

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: Ksdpjdrtaljfx Aiisdr a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: excellent (used), Year of construction: 2015, operating hours: 75,881 h, functionality: fully functional, Used Kaeser TF 280 refrigerant dryer 28 m3/min 16 bar Year of manufacture: 2015 Kedezupuwspfx Aiiedr

Condition: excellent (used), Year of construction: 2015, operating hours: 78,886 h, functionality: fully functional, Used Kaeser TF 280 refrigerant dryer Kdodpfxszupr Ne Aiier 28 m3/min 16 bar Year of manufacture: 2015

Year of construction: 2019, condition: new, Recirculating air convection furnace Gas-fired furnace CGN Powder coating oven NEW – SGS-800/O Gema Optiflex Width: 2500 mm, Height: 2500 mm, Depth: 12500 mm Directly from the manufacturer. Kdsdpfx Ascw Tzxjiisr For more information, visit Romer-Deutschland.

Condition: excellent (used), Year of construction: 2018, operating hours: 81,265 h, functionality: fully functional, Used Kaeser TF 230 refrigerant dryer Kodszupp Uepfx Aiisdr 23 m3/min 16 bar Year of manufacture: 2018

Condition: excellent (used), Year of construction: 2007, operating hours: 96,663 h, functionality: fully functional, Used Kaeser TG 301 refrigerated air dryer 30.80 m3/min 16 bar Year of manufacture: 2007 Kodpfx Aezupinsiiedr

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell Kdodpfxefz U S Eo Aiier The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: excellent (used), Year of construction: 2015, operating hours: 83,875 h, functionality: fully functional, Used Kaeser TF 340 refrigerated dryer 34 m3/min 16 bar Year of manufacture: 2015 Kdodjzupcuopfx Aiisr

Condition: excellent (used), 7.5 kW motor 1000 rpm Pressure: 10 bar Kodpfjzvnrwsx Aiijdr Tank: 350 liters

Condition: good (used), Pressure vessel 11 bar, 1500 Liter litre Kdjdpfxeg A Hc Hs Aiijr

Year of construction: 1998, condition: used, Used Machine Year of manufacture: 1998 Features and Technical Specifications: - Max. operating pressure: 10 bar - Compressed air tank: 250 l - Maximum sound pressure level: 76 dB(A) Kdodpjzk Nyfsfx Aiijr - Theoretical intake volume: 630 l/min - Effective flow rate at 6 bar: 440 l/min - Number of cylinders: 2 - Speed: 1,450 rpm - Oil capacity: 1.2 L - Oil refill volume: 0.22 l - Motor: 3 kW / 400 V - Max. start frequency: 20/h - Start-up: Direct start - Dimensions: approx. 160 x 55 x 120 cm - Weight: 240 kg Availability: Immediate Storage location: 63934 Röllbach

Condition: excellent (used), Year of construction: 2013, PROD. KAESER TYPE TH371 S/N 1002 YEAR 2013 POWER (kW) 4.3 CAPACITY (m3/min) 32 PRESSURE (bar) 16 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER BUILT-IN DRYER R404a 14kg HEAT EXCHANGER Kdedpfxezu Rvco Aiier COOLED (AIR/WATER) ON TANK DOCUMENTS CONNECTION NEW/USED USED

Condition: new, pressure 500 t column daylight 600 mm stroke 600 mm table surface area 3500 x1500 mm 600 mm feed down 8 mm/sec feed up 16 mm/sec travel on the bed 2200 x 900 mm total power requirement 30 kW weight of the machine ca. 28 t 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates are precision-milled using a CNC milling machine - Chrome-plated cylinder - Worktop with threaded holes HYDRAULICS - Bosch Rexroth hydraulic pump - Hydrapack or Badestons hydraulic directional control valve - Hydraulic block in accordance with EN standards - 1000-liter hydraulic oil tank - Pressure adjustment via pressure transmitter/regulator ELECTRICS - Control cabinet in accordance with EN standards - All cables are labeled and clearly arranged - All electrical components are from Siemens CONTROL PANEL - Stroke control in any position - X, Y, and Z-axis movement via remote control - Stroke adjustment via sensor SAFETY - The machine complies with the EC safety standards 2006/42/EC Machinery Directive, EN ISO 16092-01 and 16092-03 - Two-hand operation - Emergency stop button - Safety rope with switch around the press 4. TRANSPORT AND INSTALLATION – The price includes transport costs, installation, and training at the customer's factory. – Hydraulic oil is not included in the price. – All handling costs (e.g., crane, forklift, etc.) are borne by the buyer. 5. WARRANTY – The machine has a 2-year manufacturer's warranty. Kodpfxefv Awhj Aiisdr – This warranty covers the delivery of all spare parts required for repair and service of the machine. Damaged parts will be returned to the manufacturer after replacement with a new part. – This warranty does not cover parts damaged due to improper use.

Condition: excellent (used), Year of construction: 2013, PROD. KAESER TYPE BSD83 S/N 1280 YEAR 2013 POWER (kW) 45 CAPACITY (m3/min) 8.16 PRESSURE (bar) 8.5 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no Kodpjzu Ipmefx Aiiedr COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 1/2' NEW/USED USED