DEKANTER KHD CP 3-0.1

KHD KHD CP 3-0.1

Condition: ready for operation (used), Further information will follow. Accessories: Separator frame (stainless steel) 1200 x 1000, separator drum, motor, Ppsdpfxeqzx Dqe Ahlsw tool kit, documentation

Condition: ready for operation (used), 30 kw main drive 3250 rpm 1.2 kg /dcm. exelent conditions Ppsdox Aurkepfx Ahlew

Condition: as good as new (ex-display), PUMP WITH ATEX CERTIFICATION Rotary vane vacuum pump in oil bath. Available in stock. Ppedpfx Aheftzgxslow Completely overhauled pump. With warranty. Nominal flow: 30 m3 / h at 50Hz. Final vacuum: 1x10^-3 mbar abs. Any clarification, do not hesitate to contact us.

Condition: like new (used), Manufacturer: Varian Type: NHS-35 Condition: The pump is in very good condition and can also be supplied with a corner valve if required. Warranty: 3 months Ppsdpfxjhmba Aj Ahlsw Delivery time: In stock

Year of construction: 1999, condition: used, System: Used decanter / centrifuge Manufacturer: Baker & Hughes Model: full coat screw centrifuge Type: CP 3054 Year of construction: 1999 Hoechstzul. Speed: 3132 I/min Inner diameter drum: 552 mm Podpfx Ascbukrohlopw Drum wall thickness: 14.5 mm Engine: 2 electric motors, new Auger motor Control Panel: no Frequency converter: Yes Documentation: Yes Maintenance: regularly twice a year In operation: By early 2015 Buying and renting possible.

Condition: new, Year of construction: 2025, functionality: fully functional, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Ppedpfx Ahsrq D Niolsw Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Condition: used, We offer BOC Edwards Drystar GV600+EH4200 as a complete package. Only together, we do not sell GV600 or EH4200 separately. The pump set is used. Pjdpjrfw Rbjfx Ahlepw If you are interested, just send us a message. We will then get back to you.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, 1 used instantaneous steam generator ----- Manufacturer: CERTUSS Type: Junior Performance: 600 kg/h Maximum heat output: 436 kW Operating overpressure: 16 bar Water content: 42.5 l Test pressure: 57 bar CE mark: CE 0035 Year of manufacture: 2006 Equipped with Certuss gas burner, gas control section, Control cabinet, mounted on the boiler body, feed water pump and the existing coarse and fine fittings. Ppjdpfewra S Rjx Ahlew

Condition: good (used), Rotary vane booster pump Manufacturer: Leybold Type: RUVAC RA 9001 Condition: Overhauled and available as tested and serviced Includes: New paint job, motor relubrication, electrical inspection Warranty: up to 12 months Delivery time: in stock Ppjdpfx Ahod Hh Nvjlsw

Condition: used, Year of construction: 1991, Flottweg three-phase decanter, Z4D-3/441, last used in a fruit juice plant. Inner drum diameter: 420 mm Inner drum length: 1245 mm Drum wall thickness: 10 mm The medium to be separated is fed into the hollow center axis of the decanter. Centrifugal force causes the solids to collect on the drum shell. A cylindrical-conical screw conveyor transports the ring of solids to the discharge openings, where it is ejected into the solids housing. The two liquid components separate according to their specific density and form two hollow liquid cylinders. The diameter of the liquid rings can be adjusted using a peeling disc and overflow weir. One of the two phases is discharged without pressure and one is discharged under pressure via the paring disc. The moisture content of the solids and the purity of the liquids can be controlled by: - Varying the phase separation discs and paring diameter - Decanter speed - Screw speed Additional title: 3-phase decanter Max. bowl speed: 4000 r/min Ppjdpfxjyr Icce Ahlsw Max. sediment-density: 1 g/cm³ Max. ambient temperature: 100 °C Mass moment of inertia: 15.5 kgm2 with an empty drum Weight: 2250 kg Material: housing from stainless steel 1.4301 (AISI 304); drum made of high-strength cast stainless steel 1.4463 Position: free standing Base construction: Horizontal decanter drum in steel frame, on square tube frame with dome feet Features: Base with rubber mountings, electric motor (Loher 180 M, 22 kW)