Tray and case erector

Kramer & Duyvis B.V

Year of construction: 2025, condition: new, - soft start / stop - pre-stretch tension - additional engine - height 2.1 m - ramp / platform - platform diameter 1.65 m - film stretch up to 350% - Strong chain drive - man-hour and pallet counter - regulation of wrapping speed 3-12 rpm - the ability to adapt the device according to the customer's needs - 230V power supply - Automatic return to the starting position Hodpfemuzutox Agzjg ADDITIONAL FEATURES: - Very easy to use - Operating hours counter - Pallet counter - Cycle pause function - Stretching on the head modes and not on the palette - Adjustable wrapping speeds Pallet wrappers are designed for machine wrapping of goods stored on pallets with stretch foil. They are especially recommended where very high efficiency and low labor and financial costs in the packaging process are required, i.e. in distribution centers, warehouses, logistics centers, production plants, as well as in smaller companies. – increasing the efficiency of the packaging process – the ability to set the required parameters by machine and the high rotational speed of the wrapping plate makes machine wrapping much shorter than manual wrapping, and the employee during foiling can be involved in other activities, e.g. preparing or delivering another pallet, – repeatability of packaging – wrapping with a wrapper allows you to maintain an identical method of packaging for a specific type of cargo, repeatability of a once developed and appropriate method of packaging allows for safe storage and transport of goods, – load stability – the wrapper, thanks to the adjustment, allows you to adjust the wrapping method even to very diverse loads in a reliable way and guarantees the stability of the load on the pallet, which guarantees avoiding possible damage to the load.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, 1.0 pcs. used (as new) carton erector with 3 magazines Manufacturer: Lantech Type: MFC-2000 Year of manufacture: 2020 Hjdpewqx Nrofx Agzog Carton box Type B size: 600 mm x 400 mm x 200 mm + 200 mm (erected flaps) Carton box Type A size: 600 mm x 400 mm x 400 mm + 200 mm (erected flaps)

Condition: like new (used), 30m3 insulated stainless steel tank Dim. 3.40x 6.80. 12 cm insulation, insulated with wool and metal sheet lower bottom insulated with polyurethane foam. We offer transport with our own semi-trailer. Hodpshr Rp Sefx Agzeg

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 5 h, overall weight: 33 kg, total height: 1,300 mm, total length: 1,200 mm, total width: 500 mm, input voltage: 230 V, compressed air connection: 6 bar, type of input current: AC, Dobot Robotics CR10 Cobot Module Hsdpfev N Iwqex Agzeg Van Made Builds custom handling/packing machines & lines for customers all over the world. We build industrial machines, but we also build and install modules with cobots. A case packer, palletizer or handling machine for example. The now offered Dobot Robotics CR10 on a Stainless Steel frame, can be used for many applications. We can add the right tool, software and integrate it into your facility. Let us know what you are looking for and we will take a look at the possibilities. Framing, HMI and hardware of the offered module is brand new, the Cobot itself has been used for internal tests and for some fairs. It hasnt made any production hours yet. Looking for something else? Take a look at our website to find out what we are capable of. From Case Erector & sealers (Lantech), Conveyors, to Case Packers and Palletizers. Van Made helps you to automate your process in the most compact, efficient and flexible way!

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Hjdpfx Aju Tg I Dogzjg Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: new, Year of construction: 2021, Quantity: 4 units Year of manufacture: 2021 Reach: 2236 mm Lifting capacity: 88 kg Weight: 630 kg Hsdpfxowtqcvs Agzjg Control unit: ERAS-1000-06VX280-E10 Included items: Control cabinet Didactic box Remote control

Condition: new, functionality: fully functional, Year of construction: 2024, load capacity: 2,000 kg, lifting height: 7,200 mm, fuel type: electric, mast type: triplex, fork length: 1,150 mm, color: yellow, fuel: electricity, Brand: Aisle-Master Hsdjt Hff Aopfx Agzjg Type: 20NE Capacity: 2,000 kg Year of construction: 2024 Lifting mast: Triplex Lifting height: 7200 mm

Condition: good (used), The scope of delivery includes: 01x Pressed grate, used Material color: hot-dip galvanized Total depth: 990 mm (bearing bar direction) Total width: 1.195 mm (cross bar direction) bearing bar dim.: 40/2.0 mm frame height: 40 mm Mesh size: 100 x 100 mm Weight: approx. 11.07 kg | pcs. Internal designation: L Remark: - The frame has been flanged inward from all sides. - The gratings may have damage, scratches, dents, welds, etc. General information about the item: This item is offered for pickup only. A beyond Hsdpjnbfhajfx Agzog desired transport or a shipment of this article is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Condition: excellent (used), Technical data of the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical data for installation: Number of racking rows: 01 pcs. Shelf length: approx. 181.400 mm Number of bays / rack row: 49 pcs. á 3.600 mm Number of levels plus floor level: 04 pcs. Technical data on volume: Pallet spaces per bay: 20 pcs. Pallet spaces per row: 980 pcs. Total pallet spaces: 980 pcs. used by: Loading equipment: Euro pallet EN 13698-1 dimensions: 1.200 x 800 x 150 mm total height incl. pallet: n.d. Weight per pallet ( max. ): 800 kg Included in delivery: 50x pallet rack uprights, used Material color: grey Frame profile: PLFB155 Profile dim.: P 100 x 68 x 2,25 mm Incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) 9.050 mm high 1.100 mm deep 392x pallet rack truss, used material color: RAL 2004 orange box profile: 145 x 50 x 1,75 mm type of truss: PNB0445 agraffe: 4 HK (hooks) clear width: 3.600 mm max. load per truss pair 3.000 kg with evenly distributed load Hodomfqkwjpfx Agzjg 784x safety pins, used design: compl. galvanized To secure the longitudinal beams against unintentional lifting out 200x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 100x shims, used execution: complete galvanized for levelling of the racks which are are placed on uneven ground 01x load plates with data of field and shelf loads, manufacturer and commission number Dimension: 297 x 210 x 2 mm General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: used, Your contact person in our home: Mr: André evening Mr: Marcel Brahms Mr: Simon blank We offer you 100 used depth requirements of the manufacturer Nedcon to purchase. This depth Edition is suitable also for other manufacturers. Technical data to the depth requirement: Shelf system: Nedcon Type: NS In the scope of delivery included: 100xTiefenauflagen, used Material color: compl. zinc-plated f. stand depth: 800 mm Overall length: 800 mm clear span width: 710 mm C-Profilabm.: approx. 60 x 50 mm Traverse Edition: approx 40 mm Material thickness: 2.0 mm Weight / unit: 1,983 kg Our services at a glance: (Prices on request) -Installation, construction our general conditions of erection are to be observed -Shelf testing Shelf inspection according to DIN EN 15635 carried out to comply with the BGR 234 Visual inspection for all shelf systems Hodpfxodqkf Is Agzjg -Delivery with our own fleet of vehicles (without discharge)