Injection molding machine

KraussMaffei KM 110 - 380 CX

Year of construction: 2011, Condition: ready for operation (used), Clamping force: 1100kN, tie bar clearance: 470mm/470mm, opening stroke: 1000mm, min. mold installation height: 300mm, screw diameter: 40mm, specific injection pressure: 1860bar, max. stroke volume: 201cm³, connected load: 30kW, control: MC5. Machine dimensions: 4600mm/2650mm/2250mm, machine weight: 8t, operating hours: 57,020h. Available from December 2024, including special accessories, Krauss Maffei LRX 100, 6x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, separator flap, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available. Kwolhcjuiykkodwuow

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 110-750 CX / Hybrid machine / Operating hours: approx. 35,000 h in automatic mode Year of construction: 2011 Injection unit: Screw diameter: 55 mm Injection weight: 432 g Injection pressure: 1564 bar Dosing volume: 475 ccm Clamping unit: Clamping force: 110 t Distance between tie bars: 470x470 mm Size of the clamping platens: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Kolhjv R Uk Tscdwusww Control: MC5 Additional equipment: The machine is in a very good technical condition and worked in clean production in single-shift operation Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 35,000 h in automatic mode Core pull control Control system with hot runners Hardened injection unit - bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Proportional valve on the injection unit - Precise injection 8-section rotameter The machine has been regularly serviced by an authorized Krauss Maffei service center in Germany Dimensions Weight: 8000 kg Length/width/height: 4.90x1.60x2.10 m Drive: Pumps/motor: 22 kW Heating output: 15.62 kW Total output: 37.62 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: new, Year of construction: 2023, Krauss Maffei KM 80-380 CX injection molding machine Year of production: 2023 Fully hydraulic closing system. MC 6 control system based on an industrial computer in real-time Ethernet technology, equipped with an integrated 21.5” control panel with a color touch screen. Plasticizing system complete plasticizing system for thermoplastics with a screw diameter of 40 mm, with a return lock and an open nozzle Nozzle radius 10 mm, nozzle opening 4 mm TECHNICAL DATA OF THE MACHINE IN STANDARD DESIGN Closing unit - Mold closing force: kN 800 - Mold opening force: kN55 - Dimensions of the mounting plate (h x v): mm 670 x 670 - Clearance between columns (h x v): mm420 x 420 - Mold opening stroke: mm500 - Minimum mold height mm250 - Opening width: mm750 - Ejector stroke: mm150 - Ejector force up to forward/backward:kN23 / 10 Injection unit - Screw diameter:mm40 - Ls/D ratio: - 20.0 - Injection pressure:bar 1860 Kwslev Rainohcdwuew - Injection volume: cm3 201 - Injection weight 1):g183 - Injection speed: mm/s100 - Injection efficiency standard: cm3/s126 - Screw speed, standard: rpm 295 - Plasticization efficiency 1): - at standard screw speed: g/s 21.8 Electric-hydraulic equipment - Pump motor nominal power: kW 15 - Installed heater power: kW 10.9 - Number of cylinder heating zones: - 5 - Dry cycle time / stroke according to Euromap 6 2) : s/mm 1.7 / 294 - Capacity hydraulic oil tank: dm3280 Dimensions and weight - Net weight with control cabinet: t 3.55 - Machine dimensions (l x w x h) 3): m 4.09 x 1.48 x 2.02

Condition: good (used), Year of construction: 2007, operating hours: 30,056 h, Functionality: fully functional, clamping force: 1,000 kN, screw diameter: 40 mm, clearance between the columns: 470 mm, displacement volume: 201 cm³, injection pressure: 1.86 bar, ejector force: 22,000 N, ejector stroke: 150 mm, plate length: 770 mm, plate width: 745 mm, installation height: 300 mm, total length: 4,700 mm, total width: 1,700 mm, total height: 2,250 mm, overall weight: 7,800 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 900 mm, Equipment: documentation/manual, injection moulding machine KRAUSS MAFFEI KM 100-380 CX warehouse no.: 503471 manufacturer: KRAUSS MAFFEI type: KM 100-380 CX controller: MC5 year of construction: 2007 operation hours: 30056 h technical data clamping unit clamping force: 1000 kN distance between tie-bars h x v: 470 x 470 mm size of mould plates h x v: 745 x 770 mm min. mould height: 300 mm max. open daylight: 900 mm opening stroke: 600 mm ejector stroke: 150 mm ejector force: 22 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 160 mm technical data injection unit screw diameter: 40 mm swept volume: 201 ccm injection pressure: 1860 bar screw length: 23 l/d screw speed: 490 min plasticising rate: 29 g/s PS injection rate into the open: 151 g/s PS number of heating zones: 5 measures & weight measures of machine l x w x h: 4.7m x 1.7m x 2.25m total weight: 7800KG Kjlhcdeuhplzswueww equipment included screen text german screen text english CEE-socket 16A core pulling hydraulically 2x machine with material hopper machine incl. water flow regulator Anti vibration mounts interface EUROMAP 67 Schuko-socket 10A

Condition: new, Year of construction: 2023, Functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 1,000,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit Kwolhsud N Hdscdwuew  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: reconditioned (used), Year of construction: 2006, 160 tons Krauss-Maffei injection moulding machine built in 2006 with Sepro robot and transport-belt. Screw diameter 35 mm, 2 core pullers, 6 hot runner zones. This machine will be delivered " reconditioned " and can be shown under power ! Kjlhcdwoh Dh Dueuoww

Condition: ready for operation (used), Year of construction: 2005, Krauss Maffei KM 130 - 380 CX injection molding machine Year: 2005 Controller version: MC5 Technical details Clamping unit Clamping force: 1300 kN Mould opening force, max.: 70 kN Moving platen feed force Opening: 35.4 kN Kelhcdjv H Au Sswujww Moving platen feed force Closing: 31.4 kN Mould platen size (h x v): 840 mm x 840 mm Distance between pressure beams (h x v): 530 mm x 530 mm Mould opening stroke: 600 mm Mould height min.: 300 mm Daylight max.: 900 mm Hydraulic ejector - stroke: 150 mm Ejector force forward/backward: 22.6 / 9.9 kN Injection unit Screw diameter: 40 mm Ls/D ratio: 23 Injection pressure: 1860 bar Sweep volume: 201 ccm Injection weight, PS: 183 g Injection rate: 377 ccm/s Screw speed: 390 1/min Maximum plasticization rate: 25 g/s Nozzle pressure: 50 kN Electrical and hydraulic equipment Nominal pump motor capacity: 18.5 kW Installed heating power: 8.12 kW Adjustable barrel heating zones: 5 Number of drying cycles: 1700 1/h Drying cycle time: 2.1 sec. Tank capacity: 489 ltr. Dimensions and weight Machine dimensions: 4.30 m x 1.6 m x 2.1 m Total machine weight: 5600 kg

Condition: excellent (used), Year of construction: 2005, Krauss Maffei KM 160-380 CX injection molding machine Year of production - 2005 Number of operating hours - 34,200 Fully hydraulic closing system. MC5 control system with color monitor, integrated control panel and 3 built-in USB ports. Plasticizing system A complete plasticizing system for thermoplastics in the version with abrasion protection, with a screw diameter of 40 mm, with a non-return lock and an open nozzle TECHNICAL DATA OF THE MACHINE IN STANDARD VERSION Closing unit - Mold closing force: kN 1600 - Mold opening force: kN 86.4 - Moving force of the movable plate holding the mold - -- opening: kN 44.8 -- closing: kN 37.8 - Dimensions of the holding plate (h x v): mm 820 x 845 - Clearance between columns (h x v): mm 520 x 520 - Mold opening path: mm 650 - Mold installation height: mm 300 Kelhevp Skbscdwujww - Plate opening stroke: mm 950 - Stroke ejector: mm 150 - Ejector force: kN 22.6/9.9 Injection unit - Screw diameter: mm 40 - Injection pressure: bar 1860 - Injection volume: cm3 201 - Injection weight for PS: g 183 - Screw speed, standard, option: rpm 390/490 Electric-hydraulic equipment - Nominal power of the pump motor: kW 22 - Installed power of heaters: kW 10.97 - Number of cylinder heating zones: - 5 - Number of dry cycles according to Euromap: 1/h 1600 - Oil tank capacity: l 489 Dimensions and weight - Net weight with control cabinet: t 6.0 - Machine dimensions (L x W x H): m 4.6 x 1.6 x 2.1

Year of construction: 2007, Condition: excellent (used), Krauss Maffei KM 160-380 CX injection moulding machine Year of manufacture - 2007 Fully hydraulic clamping system. MC5 control system with colour monitor, integrated control panel and built-in 3 USB ports. Plasticising system Complete plasticising system for thermoplastics in an abrasion protected version, with a screw diameter of 40 mm, with reverse lock and open nozzle. TECHNICAL DATA OF THE MACHINE IN STANDARD EXECUTION Closing unit - Mould closing force: kN 1600 - Mould opening force: kN 86.4 - Moving force of the movable plate holding the mould - -. -- opening: kN 44,8 -- closing: kN 37.8 - Clamping plate dimensions (h x v): mm 820 x 845 - Clearance between columns (h x v): mm 520 x 520 - Mould opening distance: mm 650 - Mould installation height: mm 300 - Platen opening stroke: mm 950 - Ejector stroke: mm 150 - Ejector force: kN 22.6/9.9 Injection unit - Screw diameter: mm 40 - Injection pressure: bar 1860 - Injection volume: cm3 201 - Injection size for PS: g 183 - Screw speed, standard, optional: rpm 390/490 Electric-hydraulic equipment - Pump motor power rating: kW 22 Kelhcdspiaycswusww - Installed heater power: kW 10.97 - Number of cylinder heating zones: - 5 - Number of dry cycles according to Euromap: 1/h 1600 - Oil tank capacity: l 489 Dimensions and weight - Net weight with control cabinet: t 6.0 - Machine dimensions (L x W x H): m 4.6 x 1.6 x 2.1

Condition: excellent (used), Year of construction: 1998, Krauss Maffei KM 110-700 C2 Year of manufacture: 1998 Injection unit: Screw diameter: 45 mm Injection weight: 278 g injection pressure: 2336 bar Metering volume: 305 ccm Clamping unit: clamping force: 110 t tie bar distance: 470x470 mm size of clamping platens: 745x770 mm ejector: hydraulic clamping unit: hydraulic Control system: MC IV Additional equipment: Machine in very good technical condition Euromap 12 Robot interface Air valve x 1 Hydraulic core pull x 1 Control with hot runners x 12 Injection unit hardened - bimetal Parallel movements Proportional valve on the injection unit - precise injection Machine with cylinder / battery with compressed nitrogen (additional charge for fast work) The machine has been regularly serviced by the authorized service Krauss Maffei in Switzerland Dimensions: Weight: 6200 kg Length/width/height: 4.66x1.51x2.19 m Propulsion: Pumps/motor: 18.5 kW Heating power: 16 kW Total power: 34,5 kW Kolhcdov R Uktswujww All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, Krauss Maffei KM 300-2000 CX injection molding machine Year of manufacture -2019 Fully hydraulic closing system. MC 6 control system based on an industrial computer in real-time Ethernet technology, equipped with an integrated 19" control panel with a color touch screen. Plasticizing system complete plasticizing system for thermoplastics in the version with abrasion protection, with a screw diameter of 70 mm, with a non-return lock and an open nozzle Kwjlsv R Tp Iohcdwujw Closing unit - Mold closing force: kN 3000 - Mold opening force: kN 169 - Dimensions of the mounting plate (h x v): mm995 x 1050 - Clearance between columns (h x v): mm630 x 630 Increased width of the mold mounting plates and increased horizontal clearance between columns KM 300 by 80 mm; Clearance after enlargement: 710 x 630 mm ( h x v) - Mold opening stroke: mm820 - Minimum height mold:mm330 Increased by 150 mm min. mold height and max. opening width - Opening width: mm1150 - Ejector stroke: mm200 - Ejector force forward/backward: kN 58/28 Injection unit - Screw diameter:mm 70 Thermoplastic HPS-UN screw for high-performance applications - 70 mm Screw drive by electric motor for independent and energy-saving plasticization during mold opening and closing - Ls/D ratio: -20.0 - Injection pressure:bar 1877 - Injection volume:cm3 1078 - Injection weight 1): g 981 - Injection speed: mm/s100 - Injection efficiency:cm3/s385 - Screw speed, standard:rpm220 - Plasticization efficiency 1): - at standard screw speed: g/s 75.8 Pressure tank for increased injection power switched off by machine control Additional pump for hydraulic ejector and core function. For parallel movements of hydraulic elements during mold opening and closing, as well as pressure maintenance function for hydraulic cores. Electric-hydraulic equipment - Nominal power of pump motor:kW 55 - Installed power of heaters:kW 29.2 - Number of cylinder heating zones: -6 - Dry cycle time / stroke according to Euromap 6 2) :s/mm 2.7 / 441 - Oil tank capacity: dm3 720 Dimensions and weight - Net weight with control cabinet: t 20.1 - Machine dimensions (L x W x H) 3):m 6.55 x 2.17 x 2.25

Condition: excellent (used), Year of construction: 2012, operating hours: 34,000 h, clamping force: 800 kN, screw diameter: 45 mm, clearance between the columns: 420 mm, displacement volume: 318 cm³, injection pressure: 2,336 bar, plate width: 670 mm, plate height: 670 mm, overall weight: 3,900 kg, Equipment: documentation/manual, KRAUSS MAFFEI KM 80-750 CX warehouse no.: 503569 manufacturer: KRAUSS MAFFEI type: KM 80-750 CX controller: MC6 year of construction: 2012 operation hours: 34000 h technical data clamping unit clamping force: 800 kN distance between tie-bars h x v: 420 x 420 mm size of mould plates h x v: 670 x 670 mm min. mould height: 250 mm max. mould height: 500 mm max. open daylight: 750 mm opening stroke: 500 mm ejector stroke: 150 mm ejector force: 23 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 1000 kg technical data injection unit screw diameter: 45 mm Kwolsv D H Anohcdwusw swept volume: 318 ccm injection pressure: 2336 bar screw length: 22 l/d screw speed: 355 min injection rate into the open: 143 g/s PS number of heating zones: 5 measures & weight measures of machine l x w x h: 4.5m x 1.5m x 2m total weight: 3900KG equipment included screen text german core pulling hydraulically 1x machine incl. Handling machine without belt conveyor machine without hopper loader Anti vibration mounts technical data robot-system handling type: integrierter Linearroboter manufacture: Krauss Maffei controller: LRX 100 year of construction: 2012 handling weight: 10 kg operation hours: 3400 h X axis: 550 mm Y axis: 1200 mm Z axis: 1500 mm screen-text: deutsch

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 130-750 CX / Hybrid machine / Operating hours: approx. 35,000 h in automatic mode Year of construction: 2011 Injection unit: Screw diameter: 55 mm Injection weight: 432 g Injection pressure: 1564 bar Dosing volume: 475 ccm Clamping unit: Clamping force: 130 t Distance between tie bars: 470x470 mm Size of the clamping platens: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC5 Additional equipment: The machine is in a very good technical condition and worked in clean production in single-shift operation Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 35,000 h in automatic mode Core pull control Control system with hot runners Hardened injection unit - bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Proportional valve on the injection unit - Precise injection 8-section rotameter The machine has been regularly serviced by an authorized Krauss Maffei service center in Germany Dimensions Weight: 8000 kg Length/width/height: 4.90x1.60x2.10 m Keljv R Ukgehcdwueww Drive: Pumps/motor: 22 kW Heating output: 15.62 kW Total output: 37.62 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2007, Krauss Maffei KM 35 - 100 CX injection molding machine Year of manufacture - 2007 Kwslhcjvzx E Asdwuew Closing system : Clamping force: 350 kN Mould opening force, max.: 39.9 kN Moving platen feed force Opening: 21.6 kN Moving platen feed force Closing: 16.7 kN Mould platen size (h x v): 540 mm x 540 mm Distance between connecting rods (h x v): 320 mm x 320 mm Mould opening stroke: 350 mm Min. mould height: 175 mm Max. daylight: 525 mm Hydraulic ejector - stroke: 100 mm Ejector force forward/backward: 22.6 / 9.9 kN Injection unit : Screw diameter: 22mm Ls/D ratio: 26 Injection pressure: 2500 bar Injection volume 38 ccm Injection weight, PS: 35 g Injection speed: 59 ccm/s Screw speed: 365 1/min Maximum plasticization speed: 8.5 g/s Nozzle pressure: 50 kN Tank capacity: 215 ltr. Dimensions and weight Machine dimensions: 3.50 m x 1.50 m x 2.00 m

Condition: good (used), Year of construction: 2003, Functionality: fully functional, clamping force: 1,100 kN, screw diameter: 40 mm, clearance between the columns: 470 mm, displacement volume: 217 cm³, ejector force: 22,000 N, ejector stroke: 150 mm, plate length: 770 mm, plate width: 745 mm, total length: 4,400 mm, total width: 1,500 mm, total height: 2,120 mm, overall weight: 6,000 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 900 mm, Equipment: documentation/manual, injection moulding machine KRAUSS MAFFEI KM 110-520 C1 warehouse no.: 503020 manufacturer: KRAUSS MAFFEI type: KM 110-520 C1 controller: MC4 year of construction: 2003 technical data clamping unit clamping force: 1100 kN distance between tie-bars h x v: 470 x 470 mm size of mould plates h x v: 745 x 770 mm min. mould height: 300 mm max. open daylight: 900 mm opening stroke: 600 mm ejector stroke: 150 mm ejector force: 22 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 1485 kg technical data injection unit screw diameter: 40 mm swept volume: 217 ccm injection pressure: 2377 bar Kwjlovxgqnohcdwusw screw length: 23 l/d screw speed: 307 min plasticising rate: 22 g/s PS injection rate into the open: 126 g/s PS number of heating zones: 5 measures & weight measures of machine l x w x h: 4.4m x 1.5m x 2.12m total weight: 6000KG equipment included screen text german CEE-socket 16A CEE-socket 32A core pulling hydraulically 2x air valve moveable WAP machine without material hopper machine without water flow regulator Anti vibration mounts electric interface for handling units according to Euromap 12 Schuko-socket 10A

Condition: excellent (used), Year of construction: 2012, Krauss Maffei KM 130-750 CX / Hybrid machine / Operating hours: approx. 30,000 h in automatic mode Year of construction: 2012 Injection unit: Screw diameter: 55 mm Injection weight: 432 g Injection pressure: 1564 bar Dosing volume: 475 ccm Clamping unit: Clamping force: 130 t Distance between tie bars: 470x470 mm Size of the clamping platens: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC5 Kelov R Ukaohcdwueww Additional equipment: The machine is in a very good technical condition and worked in clean production in single-shift operation Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30,000 h in automatic mode Euromap 67 Robot interface Control system with hot runners Hardened injection unit - bimetal Main machine motor - Servomotor driven by inverter - Energy saving Proportional valve on the injection unit - Precise injection 8-section rotameter The machine has been regularly serviced by an authorized Krauss Maffei service center in Germany Dimensions Weight: 8000 kg Length/width/height: 4.90x1.60x2.10 m Drive: Pumps/motor: 22 kW Heating output: 15.62 kW Total output: 37.62 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 160 - 750 CX injection moulding machine Year of production - 2008 Fully hydraulic clamping system. MC5 control system with color monitor, integrated control panel and built-in USB ports Plasticizing system Complete plasticizing system HPS-UN for thermoplastics with screw diameter 50mm , with reverse lock and open nozzle Nozzle radius 10mm, nozzle opening 4mm TECHNICAL DATA OF MACHINE IN STANDARD VERSION Closing unit - Mold closing force: kN 1600 - Opening force of the mold: kN 86,4 - Moving force of the moving plate fixing the mold - - -. -- opening: kN 44,8 -- closing: kN 37,8 - Dimensions of the clamping plate (h x v): mm 820 x 845 - Clearance between columns (h x v): mm 520 x 520 - Opening path of the mold: mm 650 - Installation height of the mold: mm 300 - Plate opening stroke: mm 950 - Ejector stroke: mm 150 - Ejector force: kN 22.6/9.9 Injection unit - Screw diameter: mm 50 - Injection pressure: bar 1892 - Injection volume: cm3 393 - Injection size for PS: g 357 - Screw speed, standard, optional: rpm 390/490 Electric-hydraulic equipment - Rated power of pump motor: kW 22 - Installed heater power: kW 10.97 - Number of cylinder heating zones: - 5 Kslhcdweri Rxzjueww - Number of dry cycles according to Euromap: 1/h 1600 - Oil tank capacity: 1,489 Dimensions and weight - Net weight with control cabinet: t 6.0 - Machine dimensions (L x W x H): m 4.6 x 1.6 x 2.1

Condition: excellent (used), Year of construction: 2011, operating hours: 78,454 h, Functionality: fully functional, clamping force: 3,000 kN, screw diameter: 60 mm, clearance between the columns: 630 mm, displacement volume: 678 cm³, injection pressure: 2.007 bar, ejector force: 58,000 N, ejector stroke: 200 mm, plate length: 1,050 mm, plate width: 995 mm, installation height: 330 mm, total length: 6,500 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 15,000 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 1,150 mm, Equipment: documentation/manual, injection moulding machine KRAUSS MAFFEI KM 300-1400 CX warehouse no.: 503393 manufacturer: KRAUSS MAFFEI type: KM 300-1400 CX controller: MC5 year of construction: 2011 operation hours: 78454 h technical data clamping unit clamping force: 3000 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 995 x 1050 mm min. mould height: 330 mm max. open daylight: 1150 mm opening stroke: 820 mm ejector stroke: 200 mm ejector force: 58 kN centering diameter of moving platen: 160 mm centering diameter of fixed platen: 160 mm weight of mould: 3430 kg technical data injection unit screw diameter: 60 mm swept volume: 678 ccm injection pressure: 2007 bar screw length: 20 l/d screw speed: 260 min screw torque: 84 N injection rate into the open: 311 g/s PS number of heating zones: 6 measures & weight measures of machine l x w x h: 6.5m x 2.2m x 2.3m total weight: 15000KG equipment included screen text german CEE-socket 16A pressure accumulator for uprated injection speed Handling without safety fencing core pulling hydraulically 2x machine incl. Handling machine without material hopper Anti vibration mounts interface EUROMAP 67 interface for handling Kwoleu Ivbfjhcdwujw Schuko-socket 10A technical data robot-system handling type: Linear manufacture: Wittmann controller: W 833 year of construction: 2011 handling weight: 10 kg X axis: 900 mm Y axis: 1800 mm Z axis: 3000 mm B axis rotationn: 180 ° C axis rotation: 90 ° screen-text: deutsch total weight: 560 kg

Condition: excellent (used), Year of construction: 2014, Krauss Maffei KM 160-750 CX with the Sepro Industrial Robot SDR 22S / Hybrid machine / Operating hours: approx. 34,000 h in automatic mode Year of construction: 2014 Injection unit: Kwslov R Uivehcdwusw Screw diameter: 45 mm Injection weight: 289 g Injection pressure: 2336 bar Metering volume: 318 ccm Clamping unit : Clamping force: 160 t Distance between tie bars: 520x520 mm Size of the clamping platens: 820x845 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC6 - touch screen Additional equipment: Very good technical condition Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 34,000 h in automatic mode Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 1 Control unit with hot runners Hardened injection unit - Bimetal Main motor of the machine - servo motor driven by inverter - energy saving Machine with cylinder / battery with compressed nitrogen (additional charge for fast work) The machine was purchased from the first owner in October 2016 There is an option to purchase an additional Krauss Maffei hot runner controller, 24 hot zones, for an additional charge Robot Sepro Industrial Robot SDR 22S Year of construction: 2019 4-axis robot: 3 axes are driven by servomotors (electric); axis C - pneumatic Travel in axes: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Robot with adapter Purchase of the robot for an additional charge Dimensions Weight: 8200 kg Length/width/height: 5.00x1.60x2.10 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2008, INJECTION MOLDING MACHINE KRAUSS MAFFEI KM 300-1000 CX Year of production: 2008 Injection elements: Screw diameter: 50 mm Injection weight: 393.1 g Injection pressure: 2304 bar Injection volume: 432 ccm Closing elements: Closing force: 300 t Clearance between columns: 630x630 mm Table plate dimensions max: 995x1050 mm Ejector: hydraulic Closing system: hydraulic Control: MC 5 Dimensions and weight Machine dimensions LxWxH: 6.5m x 2.2m x 2.3m Kjlhcdevy Iriowujww Total weight: 15000 kg

Condition: excellent (used), Year of construction: 2007, operating hours: 25,215 h, Functionality: fully functional, clamping force: 1,600 kN, screw diameter: 45 mm, clearance between the columns: 520 mm, displacement volume: 318 cm³, ejector force: 22,000 N, ejector stroke: 150 mm, plate length: 845 mm, plate width: 820 mm, installation height: 2,100 mm, total length: 5,100 mm, total width: 1,600 mm, total height: 2,100 mm, overall weight: 6,600 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 950 mm, Equipment: documentation/manual, injection moulding machine KRAUSS MAFFEI KM 160-750 CX warehouse no.: 503472 manufacturer: KRAUSS MAFFEI type: KM 160-750 CX controller: MC5 year of construction: 2007 operation hours: 25215 h technical data clamping unit clamping force: 1600 kN distance between tie-bars h x v: 520 x 520 mm size of mould plates h x v: 820 x 845 mm min. mould height: 300 mm max. open daylight: 950 mm opening stroke: 650 mm ejector stroke: 150 mm ejector force: 22 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 160 mm weight of mould: 1862 kg technical data injection unit screw diameter: 45 mm swept volume: 318 ccm injection pressure: 2336 bar screw length: 22 l/d screw speed: 355 min plasticising rate: 39 g/s PS injection rate into the open: 143 g/s PS number of heating zones: 6 Kwslhcdjvbgtbjwuew measures & weight measures of machine l x w x h: 5.1m x 1.6m x 2.1m total weight: 6600KG equipment included screen text german screen text english CEE-socket 16A core pulling hydraulically 2x machine incl. belt conveyor machine incl. Handling machine incl. safety fencing machine with material hopper Anti vibration mounts interface EUROMAP 67 wear-resistant injection unit mould heating 6x technical data robot-system handling type: Linear manufacture: Krauss Maffei controller: LRX S100-1321 year of construction: 2008 X axis: 550 mm Y axis: 1200 mm Z axis: 2500 mm total weight: 280 kg

Condition: excellent (used), Year of construction: 2014, Krauss Maffei KM 200-750 CX with the Wittmann-Krauss Maffei LRX100-1811 robot Year of construction: 2014 Injection unit: Screw diameter: 45 mm Injection weight: 289 g Injection pressure: 2336 bar Metering volume: 318 ccm Clamping unit: Clamping force: 200 t Distance between tie bars: 560x560 mm Size of the clamping platens: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 - touch screen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Min. tool installation height - 350 mm Air valve x 2 Hydraulic core pull x 2 Control unit with hot runners x 24 Hardened injection unit - bimetal Kwolhcjv R Uipsdwuow Parallel movements Proportional valve on the injection unit - Precise injection Kistler sensor - mold pressure control Wittmann-Krauss Maffei LRX100-1811 robot Year of construction: 2014 High-speed robot 5-axis robot: 3 axes are driven by servomotors (electric); axes B and C - pneumatic Touch control panel Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions Weight: 11500 kg Length/width/height: 5.32x1.98x2.06 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 35-55 CX / machine in very good technical condition Year of manufacture: 2008 injection unit: Screw diameter: 18 mm injection weight: 18 g injection pressure: 2500 bar Dosing volume: 20 ccm Clamping unit : clamping force: 35 t tie bar distance: 320x320 mm size of clamping platens: 540x540 mm Ejector: hydraulic clamping unit: hydraulic Control: MC V - touch screen Additional equipment: Machine in very good technical condition Kelsv R Tytohcdwuoww Euromap 67 Robot interface Air valve x 2 Control with hot runners x 6 injection unit hardened - bimetal The machine has been regularly serviced by the authorized service Krauss Maffei in Germany. It is possible to change the screw diameter for fi 20 mm, 22 mm Dimensions: Weight: 2600 kg Length/width/height: 3.50x1.40x1.70 m Drive: Pumps/motor: 11 kW Heating power: 3,78 kW Total power: 14,78 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2012, Krauss Maffei KM 80-750 CX / Hybrid machine Year of construction: 2012 Injection unit: Screw diameter: 50 mm Injection weight: 343 g Injection pressure: 1892 bar Metering volume: 377 ccm Clamping unit: Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC 5 - touch screen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Air valve x 2 Control unit with hot runners x 6 Hardened injection unit - bimetal Injection unit of the machine is driven by a servo motor controlled by an inverter, electric filling and injection The machine was serviced in Germany Dimensions Weight: 5200 kg Length/width/height: 4.30x1.50x2.10 m Kwoljv R Tymshcdwuew All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2005, Krauss Maffei KM 80-180 CX with the Sepro Industrial Robot 55 sprue picker Year of construction: 2005 Injection unit: Screw diameter: 30 mm Injection weight: 77.4 g Injection pressure: 2025 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC V - touch screen Additional equipment: Euromap 67 Robot interface Control unit with air valve Hydraulic core pull x 1 Hardened injection unit - bimetal Sprue picker Sepro Industrial Robot 55 Year of construction: 2018 It is possible to purchase a Moretto brand raw material feeding system for an additional charge Kwolov R Tx Aehcdwuew The set includes: - Screw feeder, volumetric with hopper - Feeder with proportional valve Dimensions: Weight: 3900 kg Length/width/height: 3.80x1.50x2.10 m Drive: Pumps/motor: 15 kW Heating output: 8.12 kW Total output: 23.12 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request