Swap body trailer

KRONE Wechselbrücke Koffer

Condition: used, maximum load weight: 12,660 kg, overall weight: 16,000 kg, first registration: 01/2011, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,775 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,000 mm, Year of construction: 2011, Wagon No. G0121076_1 - Manufacturer: Krone. * Double corner castings * Side/rear contour markings * Roller shutter door (aluminum) * Internal keyhole system * Suitable for forklift entry Crjdsy I Ib Sepfx Anwsb * Fixed support legs * Equipment for rail loading * Lashing recesses * Lashing points Double-deck specification without double-deck bars (available at extra cost!). Storage container is wind and weather resistant, secure closure, floor in good condition, no further repairs necessary. Delivery time: IMMEDIATE AVAILABILITY. Technically operational condition without further repairs required. Undercarriage shows signs of use, some areas with rust. Occasional paint flaking and isolated rust spots on parts of the swap body. Deformations/marks on components—see photos. Dimensions are approximate. Offer subject to prior sale, prices excl. VAT ex location D-59302 Oelde. For further details, please contact us by phone or email.

Condition: used, Dimensions (HxWxD) 1700x1020x800 mm Cjdpfx Anewqg Suewjrb

Condition: used, maximum load weight: 12,520 kg, overall weight: 16,000 kg, first registration: 01/2015, loading space length: 7,670 mm, loading space width: 2,470 mm, loading space height: 2,700 mm, loading space volume: 51 m³, total width: 2,550 mm, total height: 2,925 mm, Year of construction: 2015, Wagon No. G0123929_1 - Manufacturer: Krone. * Double-deck equipment * Simple corner fittings * Contour marking on sides/rear * Portal door with single outside locking bars * Internal keyhole system * Forklift accessible * Bulkhead niche * Fixed support legs * Rail loading device * Lashing recesses * Lashing options Credpfxey E Iduj Anweb Double-deck specification without double-deck loading beams (available at additional cost!). Storage container is weatherproof, lockable, floor in good condition, no further repairs required. Delivery time: AVAILABLE IMMEDIATELY. Technically operational condition, no further repairs necessary. Subframe with signs of use. Localized rust formation on swap body components. Deformations/stops on components – see pictures. Dimensions are approximate. Offer subject to change; intermediate sale reserved. Prices net ex-location D-59302 Oelde. For further details, please inquire by phone or email:

Condition: used, maximum load weight: 13,140 kg, overall weight: 16,000 kg, first registration: 01/2012, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,525 mm, loading space volume: 45 m³, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2012, Wagon No. G0117899_1 - Manufacturer: Krone. * Load Certificate Code-XL * Roller shutter door (aluminum) * Keyhole system inside * Suitable for forklift entry * Fixed support legs * Equipment for rail loading * Lashing points Csdpfx Aney E Ifrowerb Storage container, weatherproof and secure, lockable, floor in good condition, with no further repairs required. Delivery time: IMMEDIATELY. Technically operational condition, no additional repairs needed. Undercarriage shows signs of wear, partial surface rust. Occasional paint peeling on swap body components. Isolated rust formation on swap body parts. Deformations/dents on components - see photos. Several units available! Dimensions are approximate. Offer subject to prior sale, prices net ex location D-59302 Oelde. Further details upon request by phone or email:

Condition: good (used), Year of construction: 1992, machine/vehicle number: 145 K, Offer 24018 Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drill spindle holder MK 3 - Drill spindle stroke 150 mm - 9 drill spindle speeds 104 - 1400 rpm - 2 feeds 0.1 / 0.2 mm/rev - throat depth 290 mm - max distance table - drill spindle 780 mm - Table with 2 T-slots 480 x 400 mm Cjdpfxou At Tho Anwerb - Height adjustable via rack and pinion with hand crank - Drive 400 V / 1.1 / 1.3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm - Weight approx. 420 kg - with: - right - left rotation - Coolant device - Quick-action drill chuck 1-13 - lighting

Condition: used, maximum load weight: 13,340 kg, overall weight: 16,000 kg, first registration: 01/2008, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,525 mm, loading space volume: 45 m³, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2008, Wagon No. G0123913_1 – Manufacturer: Krone. * Double corner fittings * Suitable for forklift trucks Credey E Igcopfx Anwjb * Fixed support legs * Equipped for rail loading Delivery time: IMMEDIATELY AVAILABLE. Technically operational condition, no further repairs needed. Subframe shows signs of use and partial surface rust. Isolated paint flaking on parts of the swap body. Occasional rust on components of the swap body. Deformations/impact marks on components—see pictures. Dimensions are approximate. Subject to prior sale, quotation non-binding. Prices are net ex stock D-59302 Oelde. Further information available upon request by phone or email.

Condition: used, maximum load weight: 2,280 kg, overall weight: 4,000 kg, first registration: 01/2018, loading space length: 3,540 mm, loading space width: 2,470 mm, loading space height: 2,320 mm, loading space volume: 20 m³, total width: 2,555 mm, total height: 2,650 mm, Year of construction: 2018, Vehicle no. KF_W0843364 - Manufacturer: Krone. * Standard corner fittings * Load certificate Code-XL * Roller shutter door (aluminium) * Telescopic support legs * Lashing points LASI CODE XL!!!. Multiple units available! As-new condition! Available for immediate delivery. Minor traces of short-term use – see photos. Technically ready for operation, no further repairs required. Cedpfsy E Ibysx Anwerb Dimensions are approximate. Offer is subject to change and prior sale. Prices are net ex location D-59302 Oelde. For further details, please contact us by phone or email:

Year of construction: 2023, condition: new, Tank-& Umweltschutz Wozniack Specialist company according to the Water Resources Act Dear Sir or Madam, we offer a 10,000 liter double-walled storage tank for the storage of fuel oil. EN 12285-2 standard Nominal capacity 10 cbm new EN 12285-2 norm Color equipment Lacquer RAL ; 7035 Material steel in steel, material S235JRG2 Documentation Manufacturer's certificate/ nameplate piece 1 dipstick Piece 1 air vent Credpok Dpv Ajfx Anwob Piece 1 filling nozzle Piece 1 new limit switch Piece 1 new leak detection sight piece 1 ladder Piece 1 suction line tank dimensions approx. 5.300 mm diameter approx. 1.600 mm Weight approx. 2.000 kg Storage above ground Delivery time = September With kind regards from Warstein Tank and environmental protection Wozniack Enkerbruch 2 59581 Warstein

Condition: used, maximum load weight: 12,960 kg, overall weight: 16,000 kg, first registration: 01/2022, loading space length: 7,670 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 52 m³, total width: 2,550 mm, total height: 2,975 mm, Year of construction: 2022, Vehicle No. CC_W1085778 - Manufacturer: Krone. * Simple corner fittings * Load certificate Code-XL * Roller door (aluminum) Crodpfoy E If Ssx Anwjb * Accessible by forklift * Front wall recess * Telescopic support legs * Device for rail transport * Lashing pockets * Lashing options * Partially with keyhole system inside Long-term rental possible. Delivery time: IMMEDIATELY. Technically ready-for-use condition without further repair. UVV valid. LASI CODE XL!!!. Multiple units available!. As new condition!. Dimensions are approximate. Offer without obligation, subject to prior sale, prices net ex location D-59302 Oelde. Further details upon request by phone or email:

Condition: used, maximum load weight: 12,420 kg, overall weight: 16,000 kg, first registration: 01/2012, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,775 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,000 mm, Year of construction: 2012, Wagon No. G0114002_1 - Manufacturer: Krone. * Simple corner fittings * Roller shutter door (aluminum) * Internal keyhole system * Side walls with partially integrated folding tables * Forklift accessible * Front wall recess * Fixed support legs * Device for rail loading * Lashing points Storage container, weatherproof and secure closure, floor in good condition, no further repairs needed. Delivery time: IMMEDIATE AVAILABILITY. Technically ready for operation with no further repairs required. Subframe shows signs of use, some areas with onset of rust. Isolated paint flaking on swap body components. Occasional rust on swap body components. Deformations/impacts on components/see images. Several units available! Dimensions are approximate. Offer is subject to prior sale, prices quoted are net ex location D-59302 Oelde. For further details, please enquire via phone or email. Credpfx Aoy E Icqsnweb

Condition: new, table length 1200 mm table width 1200 mm table height 840 - 890 mm weight of the machine ca. 0,32 t Welding table / perforated table: Hole diameter: 28mm Cedpfxepk Iv Ue Anwjrb The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery

Condition: used, maximum load weight: 12,930 kg, overall weight: 16,000 kg, first registration: 01/2018, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,670 mm, loading space volume: 48 m³, total width: 2,550 mm, total height: 2,850 mm, Year of construction: 2018, Wagon No. G0122442_1 – Manufacturer: Krone. * Double corner fittings * Side/rear contour marking * Portal door with simple external swing bolt locks * Telescopic support legs Crsdpfxey E Ia No Anweb * Equipment for rail transport * Lashing points * Partially with internal keyhole system LASI CODE XL! Multiple units available! Delivery: IMMEDIATE. Technically operational condition, no further repairs needed. Partially repainted. Undercarriage with signs of use. UVV (accident prevention regulation) valid. Dimensions are approximate. Offer is non-binding; subject to prior sale. Prices are net ex-location D-59302 Oelde. For further details, please contact us by phone or email:

Condition: used, maximum load weight: 12,840 kg, overall weight: 16,000 kg, first registration: 01/2005, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,550 mm, loading space volume: 46 m³, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2005, Vehicle no. G0123742_1 – Manufacturer: Krone. * Double corner fittings * Roller door (aluminium) * Keyhole system inside * Stackable * Forklift accessible * Telescopic support legs * Prepared for rail loading * Lashing options Delivery time: IMMEDIATE. Technically in operational condition with no further repairs required. Subframe shows signs of use. UVV valid. Codpjy E Ibaofx Anworb Dimensions are approximate. Offer non-binding, subject to prior sale; prices are net ex location D-59302 Oelde. For further details, please inquire by phone or email:

Condition: used, 12 St. ca. 90 kg ca. 710x720x1000 mm drawer measurements 600 x 600 mm Crodpfx Anjylcp Rewob Colour 7035/5012 RAL Cabinet including assortment of dividers Large drawer usable space Full extension drawers (VA) 100% 8 drawers with internal height 40 mm 2 drawers with internal height 70 mm, 2 drawers with internal height 95 mm, 7 drawers with tray dividers and boxes 3 drawers with rail dividers 2 drawers with foam inserts Ball bearing drawer runners Individual pull-out stop Individual locking possible for each drawer Cabinet without key! Translated with (free version)

Condition: used, maximum load weight: 12,900 kg, overall weight: 16,000 kg, first registration: 01/2023, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 49 m³, total width: 2,480 mm, total height: 2,975 mm, Year of construction: 2023, Wagon No. G0123333_SAMPLE - Manufacturer: Krone. * Double-deck equipment * Simple corner fittings * Contour marking on sides/rear * Load certificate Code-XL * Roller shutter (aluminum) * Internal keyhole system Credey E Ib Tepfx Anweb * Drivable with forklift * Telescopic support legs * Fitted for rail transport * Lashing recesses * Lashing options Double-deck equipment without double-deck loading bars (available at extra cost!). Delivery: IMMEDIATELY. Typical signs of use from short-term operations - see pictures. Technically operational condition, no further repairs required. Undercarriage with signs of use. UVV valid. LASI CODE XL !!!. Multiple units available! All dimensions are approximate. Offer subject to prior sale and confirmation, prices net ex-works D-59302 Oelde. Further details on request by telephone or email: