Bottle filler/capper/labeller

Krones

Condition: used, Year of construction: 2024, Overview Used spare parts for KRONES Contiform S PET stretch blow moulders (S8 to S24), sold individually from stock - no need to buy the complete inventory. The part descriptions name the executions S Gen. 2-3.1, S Gen. 4a, S Enviro and Enviro 2. Age and condition - Mould carriers and heating chain: 2 years old - Cams: older, without damage Crodpfx Akj Ahxz Hotoi - Electrical parts: partly from 2005, others newer. The older ones are no longer made in this form; the alternative is a retrofit at extra cost. - All parts used, sold as-is without guarantee, subject to applicable law and the agreed sales terms Available parts (part number, description, quantity) Heating and preform handling - actuation unit T50 NRS (32) - heating chain link HZM T50 (250) - 1786323181 heating mandrel, 44 mm stroke (250) - three-phase motor 120/150 W (20) - 1786323430 reflector, complete (60) - 2800200575 energy-optimised heating box (20) Cams and locking - 1786470930 guide cam, downward (1) - 1786470940 guide cam, upward (1) - 1786470640 cam segment (1) - 1786470660 cam segment (1) - 1786470650 cam segment (1) - 1786470700 cam segment (1) - 1786470710 connecting plate (1) - 1786471180 linkage lever (1) - bearing bracket LBN-20/25 (1) - double-acting cylinder 25 mm, stroke 20 mm (1) - rod-end joint (1) - locking cam type 787 (1) - unlocking cam type 787 (1) - main cam (quantity on request) Drive and blowing modules - synchronous geared motor 11 kW (1) - 2786107120 pinion shaft, 18/24 stations (1) - 2800207818 intermediate shaft, 24 stations (1) - sealing head (1) - 2800200738 stretch module housing (10) - 9120641682 blow piston block, Enviro 2 (24) - blow slide, S Enviro (20) - 2800200762 stretch slide, S Gen. 2-3.1 (20) Mould carriers S Gen. 4a - mould carrier, complete (23) - 2800200765 base mould holder (23) - 2800200774 actuation assembly (23) Bottle transfer - 9121792003 swivel arm, infeed star (24) - 2800200556 bottle rejection assembly, 16-24 stations (2) Media and electrical - flow meter type 335 (3) - 1786411200 hose assembly, base mould (20) - 1786411210 hose assembly, mould half A (20) - 1786411220 hose assembly, mould half B (20) - power controller (20) - safety switch 250 V / 2 A (8) - Danfoss VLT 500 frequency inverter (6) Compatibility Check the fit on your machine before purchase: send the KRONES machine model with its type plate data, the part number and, if available, the assembly or drawing number. KRONES and Contiform are trademarks of their respective owner; this is an independent offer of used spare parts. Availability Available immediately from stock; quantities subject to confirmation, photos of individual parts on request.

Condition: good (used), machine/vehicle number: 2029, Printing press Boston Tiegel A4+ Hohner Tiegel, electric/with motor, machine number 2029, in good condition, immediately available. 2 machines available. If you are interested, we would be happy to inform you about other machines in our facility. You are welcome to inspect the machine at our premises by prior appointment. Cedpfx Aksxc Eucoteri

Condition: used, Year of construction: 2007, Overview This Krones Variojet is a rotary rinser for glass bottles, built in 2007 and still running in production at a large brewery. The bottles are held in grippers on the carousel and pass three treatment stages before filling: rinsing with water, blowing out with air and gravity drainage. The machine runs at up to 48,000 bottles per hour; this output was achieved in production on the 330, 400 and 500 ml formats, while on the larger formats the filler set the line speed. It has been run on 330, 400, 500, 580 and 650 ml glass bottles, and the change parts for these formats are included. The rinser is fully enclosed by transparent safety doors and is operated from a Krones iPanel. The universal format parts visible in the video are not included in the offer. Technical data - Manufacturer: Krones Cjdpfx Aksz Hai Tetori - Model: Variojet - Year of manufacture: 2007 - Machine type: rotary rinser for glass bottles - Output: up to 48,000 bottles per hour - Bottle formats: 330, 400, 500, 580 and 650 ml glass - Rinsing positions: 110 - Treatment stages: water rinsing, air blowing, gravity drainage - Control: Siemens S7-300 PLC, Krones iPanel (B&R) with zenon V6.20 - Electrical supply: 400/230 V, 50 Hz, 3/N/PE, full-load current 18 A - Operating hours: 44,485 h - Dimensions: approx. 4.5 m across the carousel including the safety guarding Equipment - Rinser with carousel, bottle grippers and transparent safety doors - Front table with infeed screw and starwheels - Control panel with Krones iPanel - Water and air supply manifold - Domnick Hunter compressed-air dryer - Change parts for 330, 400, 500, 580 and 650 ml bottles - Water drip trays Condition Used, in good condition with no known defects. The machine is still installed and in production and can be inspected in operation by arrangement. Maintenance: the drive train is overhauled every two years (last in 2025), the rinsing nozzle system every two years (last in January 2026) and the water and air distributor every two years (last in 2024); suspension and format components are inspected monthly and repaired as needed. Availability Available from late February / March 2027, after removal from the production line. Location: Poland.

Condition: used, Year of construction: 2012, operating hours: 759 h, machine/vehicle number: LC644, Used Krones CSD filling line for Glass 36000 BPHTechnical Specifications & Performance DataThis line is build in 2012, Krones complete line for glass CSD, rated 36,000 bottles/hour in 1.0 L format, with a 70‑valve isobaric filler and 18 capping heads. ready for operation, and shows 759 working hours.Manufacturer: KronesYear of manufacture: 2012Nominal capacity: 36,000 bphProduct type: CSD (carbonated soft drinks)Container type: Glass bottlesBottle neck finish: 28 mmVolume format: 1.0 LRinsing heads/nozzles: 90Filling valves: 70 (isobaric filler for CSD)Capping heads: 18Working hours: 759Electrical ratings: 400/230 V, 50 Hz; up to 46 A on major modulesLine components: Krones Linatronic empty-bottle inspector; rotary rinsing machine (90 nozzles); isobaric filling machine (70 valves, 18 capping heads); Krones Checkmat filled-container inspector; Krones Autocol labeling machine; Krones Variopac wrap-around packer; Krones Modulpal palletizer; integrated conveyor systemDocumentation: Operating manuals availableLayout: Line layout availableAdvanced Automation & Control SystemsKrones automation with centralized HMI enables recipe-based changeovers and synchronized drives for high-speed CSD operation.Operator HMI for setup and monitoringAutomatic synchronization across rinsing, filling, labeling, packing, palletizingElectronic fill control optimized for isobaric CSD fillingInterlocked safety guards and distributed emergency stopThree-phase 400 V supply with 230 V control circuits, 50 HzProduction Line Integration CapabilitiesEngineered as a cohesive Krones platform and bottling station, maintaining precise glass handling from infeed through palletizing.Inline operation with full conveyor integration from empty bottle inspection to finished palletsFormat range centered on 1.0 L, 28 mm neck glassIsobaric technology dedicated to carbonated soft drinksLabeling via Krones Autocol for accurate application on glassWrap-around case packing (Variopac) and palletizing (Modulpal)Machine Condition & Maintenance HistoryOn power and ready for operation with low hours. Documentation and layout support fast installation and service planning.Operational status: ready for operationLow-hours profile: 759 hoursManuals and layout includedOperational Performance & VersatilityConfigured for glass CSD, providing stable carbonation retention and foam control at 36,000 bph. As a CSD bottling machine, quality control is ensured by dual inspection: Linat... Csdpfx Akjzd Ufteteri

Condition: good (used), total height: 2,500 mm, total length: 5,300 mm, total width: 2,500 mm, feed length X-axis: 1,550 mm, feed length Y-axis: 600 mm, grinding height: 800 mm, overall weight: 7,800 kg, GER RS 15/60 grinding machine Table 1500 x 600 mm X-axis travel 1550 mm Y-axis travel 600 mm Maximum grinding height 800 mm Wheel size 400 x 100 mm Crsdpfevli H Sex Aktji Automatic infeed Yes Dovetail accessory Yes Cooling system Yes Machine dimensions (width x length x height) 2500 x 5300 x 2500 Weight 7800 kg

Condition: good (used), functionality: fully functional, Krones steam shrinking line, capable of processing up to 12,000 bottles per hour. Credpfx Ae Ah Thnoktoi

Condition: used, Year of construction: 2004, Overview Krones Lavatec KES bottle washer from 2004, rated at 11,000 bottles per hour. The machine cleans glass bottles in a juice and soft drink bottling line and is still installed and under power. Technical data - Manufacturer: Krones - Model: Lavatec KES - Year of manufacture: 2004 - Output: 11,000 bottles/h - Containers: glass bottles - Electrical supply: 380 V, 3 phases, 50 Hz, 70 A connected load Codj Agpqwspfx Aktsri Condition Used, still installed and under power. The line produces until shutdown on 20 November 2026. Inspection on site is possible. Availability Available after shutdown on 20 November 2026. Location: Belgium.

Condition: repair required (used), Year of construction: 1991, functionality: limited functionality, Single-color flexographic printer for tissue paper. Credpfoy Iddvjx Aktsi Year: 1991 Model: Fabio Perini 8930 Printing width: 2800 mm This printing unit must be integrated into your converting line.

Condition: used, Year of construction: 2015, Overview Complete glass bottle line for still soft drinks and juices, built around a Krones Modulfill filler with Variojet rinser from 2015 and rated at 13,000 bottles per hour on 1 l and 22,000 bottles per hour on 0.25 l. The line runs non-returnable glass: depalletizing, rinsing, hot or cold filling, a White Cap twist-off capping machine behind the filler, hot-fill pasteurization, cooling, full bottle inspection, labelling on a Krones Prontomatic and a Langguth labeller, sleeving, tray and carton packing, incrating and palletizing, with buffer table. Two cappers are part of the line. The filler runs hot fill and can also fill cold, which widens the range of products the line can handle. There is no carbonator, so the line fills still (non-carbonated) products only. Technical data - Products: still soft drinks, juices - Filling: hot fill or cold fill, no carbonation - Containers: non-returnable glass bottles 0.25 l - 1 l - Line output: 13,000 bottles/h on 1 l, 22,000 bottles/h on 0.25 l - Years of manufacture: 1987 - 2016 Scope of Delivery Type | Manufacturer | Model | Description | Year - Glass depalletizer | Legendre | 16,000 bottles/h | 1999 - Rinser | Krones | VARIOJET | 13,000 bottles/h on 1 l, 22,000 bottles/h on 0.25 l | 2015 - Filler | Krones | MODULFILL | 13,000 bottles/h on 1 l, 22,000 bottles/h on 0.25 l | 2015 - Twist-off capping machine | White Cap | closure diameters 38 - 53 mm, arranged behind the filler - Bottle inverter | Polyketting | 12,000 bottles/h | 2004 - Hot-fill pasteurizer | APV | 15,000 l/h | 2005 - Bottle cooler | SEN | 1987 - Full bottle inspector | Heuft | SPECTRUM TX | 22,000 bottles/h - Labeller | Krones | PRONTOMATIC | 15,000 bottles/h | 2006 Crsdo Agpk Ajpfx Aktoi - Labeller | Langguth | 13,200 bottles/h | 2004 - Sleever | Sleeve Technology | 16,000 bottles/h | 2016 - Buffer table | Krones | 2006 - Tray packer | SMI | 16,000 bottles/h | 1996 - Incrater | Stork | 16,000 bottles/h | 1996 - Carton erector | Kettner | KAF | 12,000 bottles/h | 1999 - Carton closer | Kettner | HDV | 12,000 bottles/h | 1999 - Palletizer | Kettner | PRESSANT UNIVERSAL | 17,000 bottles/h | 1996 Condition Used, still installed. The line produces one last time from 1 to 20 November 2026. Availability Available after shutdown on 20 November 2026. Location: Belgium.

Condition: used, Year of construction: 2004, machine/vehicle number: LC637, Used Sidel-Krones PET bottling line 18000 BPHTechnical Specifications & Performance DataThis complete used bottling line is engineered for PET bottle handling and optimized for still water applications. Built with premium components from Sidel, Krones, AROL, SMI, Twinpack, ACMI, TOSA, ., and Videojet, it delivers consistent performance at industrial scale. The line operates at a production capacity of 18,000 bph and is configured for the most common market formats.Production speed: 18,000 bph 2L, 23.000 BPH 0,5L Container types: PET bottlesBottle formats: Compatible with 0.5L and 2.0L bottle formatsPrimary components: Sidel SBO 16 Series 2 blow molder (16 molds), Sidel ALSIM gravity filler (63 valves), AROL capping system (pre-threaded plastic caps), Krones CONTIROLL roll-fed labeler (1 station, 16 bottle plates), SMI SK452 F shrink wrapper, Twinpack MHTE handle applicator, ACMI PASAR P130 2L layer palletizer, TOSA 125 + 475 ring pallet wrapper, . R 13/2 preform tipper, Videojet 3210 laser coderAir recovery: Integrated with blow molderChiller: Not includedTooling: Blow molds not includedBuild years (components): 2000–2024Advanced Automation & Control SystemsThe line integrates modern automation features across critical stations to ensure stable performance and high-quality output in beverage production. The Krones CONTIROLL labeler features electric head adjustment for precise label placement, while the capping system by AROL uses a pick & place distribution to ensure reliable application of pre-threaded plastic caps. The Sidel ALSIM filler operates within a pressurized cabin equipped with filters to support hygienic filling conditions.The Sidel blow molder includes an air recovery system to optimize compressed air utilization. Operator interfaces across the equipment provide intuitive adjustment and monitoring, supporting quick startups, changeovers, and routine operations in high-throughput environments typical of industrial packaging.Production Line Integration CapabilitiesThis second hand used bottling line is designed for seamless integration from preform handling to end-of-line palletizing. The . preform tipper, hopper, elevator, and preform infeed supply the Sidel SBO 16 Series 2 rotary blow molder. Downstream, the gravity filler and AROL capping machine form a robust monobloc for consistent filling and closure application. The Krones CONTIROLL labeler applies plastic wrap-around labels via a roll-fed station, supported by a Videojet 3210 laser coder for high-contrast coding. Secondary and end-of-line packaging are handled by the SMI shrink wrapper, Twinpack handle applicator, ACMI layer palletizer, and TOSA ring wrapper.Inline configuration from preform tipping through palletizingFormat change capabilities for 0.5L and 2.0L PET bottlesSuitable for water production with PET containersMachine Condition & Maintenance HistoryThis used bottling line is presented in working condition with components manufactured between 2000 and 2024, including a recent 2024 Videojet coder for coding in... Credpsz E Dk Eefx Aktei

Condition: good (used), Year of construction: 1976, Polygraph OM II Letter press machine good condition running in production avaiable immediately Crodpfx Aetdcipektoi

Condition: used, Year of construction: 2003, Overview This Krones Sander Hansen tunnel pasteurizer was built in 2003 for the pasteurization of beer in glass bottles. It is a double-deck machine with a nominal capacity of 40,000 bottles per hour on 0.5 l bottles. Its 12 treatment zones - 4 regenerative zone pairs and 4 pasteurizing zones - cover a treatment area of 241.6 m². At the design point it delivers 25.3 PU at 60 °C, with a total treatment time of 54.2 min (17.2 min heating, 19.9 min pasteurizing, 17.2 min cooling) from an inlet temperature of 12 °C to an outlet temperature of approx. 35 °C. Technical data - Manufacturer: Krones (Sander Hansen) - Year of manufacture: 2003 - Machine type: double-deck tunnel pasteurizer - Capacity: 40,000 bottles/hour (0.5 l glass bottles) - Treatment area: 241.6 m² - Decks: 2, main conveyors: 2 - Zones: 12 in total (4 regenerative zone pairs, 4 pasteurizing zones) - Max. spray temperature: 64.5 °C - Water content: 38.9 m³ in total (20.6 m³ in the zones, 18.3 m³ in the buffer tanks) - Steam: 2,270 kW design flow, approx. 1,100 kW in balanced operation - Main water: 77.8 m³/h design flow, approx. 1.0 m³/h in balanced operation - Compressed air: 5 m³/h - Electrical: 215 A rated current, 141.3 kVA, 113 kW, cos phi 0.80 - Overall length without operator platforms: approx. 24,752 mm - Width: approx. 5,580 mm (7,680 mm incl. pumps and operating area) - Pump side: right, seen from the infeed - Empty weight: approx. 74,000 kg (163,200 kg with product and water) - Largest section for transport: 12,000 x 1,100 x 2,250 mm - Transport: approx. 12 x 40 ft containers or trucks Equipment - Stainless steel housing with external circulation pumps and piping - Buffer tanks for regenerative water management - Local push-button control stations with emergency stops along the machine - Electrical cabinets and field terminal boxes Crodpfxe Af Tkhs Aktji - Operator platform with stairs Scope of supply The associated conveyor systems are not included. The scope of the conveyor system can be seen in the photos. Condition Used, still installed. The machine can be visited. Dismantling and loading can be carried out by the seller. Availability From 28 October 2026. Location: Poland.

Condition: used, Year of construction: 2003, machine/vehicle number: RV150, Consisting of: - Rinser 20 nozzles Crodj Ahlr Iopfx Aktei - Filler 20 valves - Natural corker for 3 heads - Screw capper for3 heads 28x32 MCA Capacity: 3500 bph

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, The all-rounder combines outstanding build quality with a wide range of applications. Our machine also offers intuitive operation to optimize your packaging processes. Crjdpfx Akswld Tfetei A high-quality material unwinder with dual automatic roll centering ensures precise material guidance. Furthermore, our active material advance unit guarantees optimal web tension for flawless packaging results. The highly powerful brushless motors and user-friendly color touchscreen control system give you maximum flexibility during format changes and greatly simplify your packaging operations. The machine features memory slots for storing machine parameters—up to 50 different products can be saved. For this packaging line, we also offer fully and semi-automatic infeed systems, which can be retrofitted at your request. The machine is available in both directions of operation and features rotary cross-sealing with an electronic overload protection switch for maximum safety. Thanks to its powerful performance, versatility, and technological sophistication, our machine is ideally suited for packaging food items such as brioches, cakes, candies, pralines, chocolate, as well as pharmaceutical products and various gift articles. If you wish to optimize your packaging processes with strong production performance and high quality, Impuls Packaging is your ideal partner. System features: 1. Chain conveyor belt, 2.6 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotary end seal, single sealing jaw 5. Robust, central fin seal structure 6. Four servo-driven systems: - Active material advance shaft - Center sealing - End sealing - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. 304 stainless steel housing 10. Documentation in the local language 11. Register mark control 12. Bag length programmable or with fully automatic product length detection 13. Standard operation from left to right Technical specifications: 1. Product length: L40–600 mm 2. Product width: W30-200 mm 3. Product height: H10–80 mm 4. Packaging speed: up to 80 products/min 5. Maximum film width: 600 mm 6. Power supply: 1Ph. 220V 50Hz 7. Total power: approx. 4.7 kW 8. Machine weight: approx. 550 kg 9. Machine dimensions: approx. 4300 x 1190 x 1210 mm

Condition: used, Year of construction: 2000, machine/vehicle number: 690-264, Machine: KRONES KGW-65-S-E Crate washer Credpfx Ako Ahlaaotji