KRONES LABELLING MACHINE

Krones VARIOMATIC

Year of construction: 2013, operating hours: 960 h, condition: used, machine/vehicle number: Technical name AVN2000AB-2525PR-078250, Please check the below attached pdf. document for the full detailed description of the machine. For additional fotos and information please don't hesitate to contact us. Purchase 1 AVN2000AB Tunnelling Machine Mixed Ground Cutting Wheel The mixed ground cutting wheel is designed for AVN2000AB in mixed ground such as: mixture of soft ground, gravel or coarse gravel, weathered/soft rock. Supplied with soft ground cutting tools & disc cutters. Full set of cutting tools bolts and cutting wheel bolts included. Maximum Unconfined Compressive Strength (UCS ) 60 MPa Closed face type Cutting diameter 2 575 mm Cutting tools Chisel 12 No Chisel width 100 mm Scraper 8 No Cutting disc 11 No Cutting disc diameter 305 mm Tooling system backloading Machine AVN2000AB Articulated shield with face support / excavated material transportation by slurry. Slurry feed by 6 nozzles into crusher / excavation chamber and 2 nozzles to area Gtsdpfxolkdl Aj Aabot around slurry discharge pipe. All nozzles (crusher/excavation) are equipped with interchangeable nozzles inserts for different nozzle diameters to run in medium pressure mode. Integral conical stone crusher behind cutting wheel. Face access for cutter inspection / change. Optional easily fitted cutting wheels for soft ground, mixed soil conditions with some rock and full rock conditions. Central drive unit with splinted shaft for reliable, heavy duty torque transmission to cutting wheel.

Condition: new, Year of construction: 2025, functionality: fully functional, Labeling system for round and square canisters Stainless steel frame 170 mm wide link chain (optionally wider possible) Standard label width 140 mm or 190 mm, optionally up to 260 mm possible Label length 300 mm, optionally longer Dispensing speed up to 30 m/min., optionally 50 m/min Product diameter according to technical testing from 20 mm - 170 mm, optionally other sizes possible Touch screen display, with storage option Label dispenser with three-dimensional adjustment option Product separation with two-sided belts Gedju Ia E Iopfx Aabett Product alignment for square bottles Top belt guide for square and oval products Other labeling options, such as lid labeling, seal labeling, bottom labeling, etc.

Condition: used, Year of construction: 2008, turning diameter: 275 mm, spindle bore: 80 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,345 mm, total height: 2,232 mm, total length: 4,339 mm, total width: 2,232 mm, overall weight: 7,600 kg, Equipment: documentation/manual, CNC Lathe with Y-axis, driven tools an 2nd spindle CNC Control MSX-850-lll (mitsubishi 720 BM) Gsdpfx Aexnmzhjabstt Turning diameter 275 / 366 mm Spindle bore diameter 80 mm Spindle speed 4000 R/min Spindle motor 18.5/15 Kw Movement X-axis 260 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1345 mm Movement W-axis (subspindle to mainspindle) 1275 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Tool Taper BMT Bar feeder LNS Quick Load Servo lll Spindle motor driven tools 6000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2015, functionality: fully functional, Description: Complete automatic weighing and bagging system for free-flowing granular or crystalline products such as fertilizers. The line consists of: Automatic Net Weigher NET/G Based on CBC weighing system Gravity infeed system Stainless steel product-contact parts (AISI 316) Electronic microprocessor control with LED display Pneumatic flow regulation Dust extraction connection Designed for 25, 40, and 50 kg bags Gjdswqfadspfx Aabjtt Automatic Bag-Forming Machine FFS-E 900 Forms and seals polyethylene (PE) bags from tubular reel Up to 900 bags/hour (product dependent) Dual sealing stations (bottom and top) Bag length control via encoder and photocell Vibrating device for product settling Siemens PLC control, operator terminal TP177B Stainless steel and anti-corrosion construction Complete with conveyors and safety guarding Suitable For: Granulated fertilizers, urea, crystalline chemicals, resins, salt, and other free-flowing materials. concetti, net/g, ffs-e 900, automatic bagging machine, bagging line, form fill seal, ffs bagger, polyethylene bagging, used bagging machine, net weigher, industrial packaging line, free-flowing materials, fertilizer packaging, granular materials, crystalline products, sack filling, open-mouth bagger, reel-fed bagging machine, palletizing line, PE bag machine, AISI 316, stainless steel bagging, Siemens PLC, automated bagging system, bag making machine, fertilizer line, urea bagging, bagging with sealing, industrial automation, CE marked, second-hand packaging machine, heavy-duty bagger, bulk material bagger, precision weighing, dosing system, bag closing system, automated filling system, eurodrive motors, modular bagging solution, bagging and sealing system

Condition: used, Year of construction: 2011, Mazak HC Nexus 5000-II Mazatrol Matrix Nexus Year: July 2011 Pallet Size: 500 x 500 mm Movement: - X: 730 mm Gsdpfov Tvh Sex Aabett - Y: 730 mm - Z: 740 mm Spindle Speed: 12,000 rpm Tool Changer: 40 positions Chip Conveyor: Chrome

Year of construction: 1999, condition: ready for operation (used), Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, no documentation available. Gtjdpfoilhfcex Aabjt

Year of construction: 2021, condition: new, machine/vehicle number: 2021102613, Aluminum angled conveyor belt with substructure Conveyor length: 2000mm flat + 2200mm rising Pitch angle in bend 45°C Discharge height: approx. 1800mm Height of the horizontal top edge 200mm PU conveyor belt Conveyor belt EM 9/2 0+05 PU petrol matt Belt width 500mm 21 pcs. T30 studs welded - pitch 310mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Full-surface underlay sheet Drive: Motor approx. 1.1KW Belt speed approx. 0.4m/sec * optionally controllable with frequency converter Gtodpfx Ash Eld Eeabot Connection 220/400V, 50Hz protection class IP54

Condition: excellent (used), COLLATING MACHINE BOURG: 2xTOWERS BST10 & BDF Counter: number sets: 2092702 // sheets: 2102565 // stapling: 1807398 // folds: 2022952 // cuts: 1763900 Godpfx Aoir U Rtoabjtt Equipment: 2xTOWER BST10 / BST 10 (each 10 stations) M.No.: 02 01 4 1834 M.No.: 02 11 4 1769 BDF M.No.: 40 12 4 1046 Two spare wire stitching heads included

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Our horizontal form, fill and seal machine from the DEAPHS series is specially designed for filling sachets and doypacks sealed on 3 and 4 sides. Thanks to the various dosing systems, such as auger dosing, the volumetric cup filler and the multi-head filler, the machine reliably packs powdery, liquid and granular products. The machine also produces the bags to be filled independently from flat film, making it a cost-effective and efficient packaging solution. The modular design of the form, fill and seal machine means that it can be converted and extended quickly and easily. ✅ Perfectly suited for food, pet food, pharmaceutical products, cosmetics and other non-food products. Gtsdpfx Aeum R Ezoabst ✅ Also ideal for filling small product quantities and samples - for example in our mini pouches. ✅ Optional accessories such as volumetric cup filling system, multi-head combination weigher, piston filling device and Hibar pump filler ✅ You can also obtain suitable packaging material (pouches & film) from us Independent film unwinding shaft: Ensures good control of film tension, flexible adjustment to film roll width and bag specification possible, better doypack forming. Configuration: -Film unwinding shaft -Bag bottom sealing -Bag bottom former -Three horizontal sealing units -Two vertical sealing units -Servo bag take-off -Mechanical bag cutting -Vacuum bag opening -Photocell control -LCD - Touch display -SPS - Panasonic -Servo-controlled film feed Machine dimensions: approx. 5,500mm x 1,100mm x 1,400mm (L x W x H) Net weight: approx. 2,000kg Connected load: 380V, 3-Ph, 50Hz, 6.5kW Air consumption: 0.23m³/min Main components: Mitsubishi, Panasonic, Autonics, ABB, Airtac, SMC

Condition: used, Year of construction: 2019, Highly flexible vertical machining center for milling, drilling and cutting. The BREMA patent for processing vertically, allows this series of machines to be the most flexible and productive machine par excellence to a very high quality level. Furthermore, the automatic return / rotation system of the panel makes it fully automated. Possibility of working in height up to 1300 mm, working on all 6 sides of the panel. Working dimensions: * length 300 - 2500 mm * height 60 - 1300 mm * thickness 10 - 80 mm * max weight 50 kg Machine programming and control system with PC - TPA Albatros software. Programming editor with a high-level software interface allows you to program the machine easily and intuitively and also allows: * linear, circular and helical interpolation * double zero reading * mirror program management * optimizer for revolver tool diameter * optimizer for independent spindle diameter * DXF file conversion (geometric conversion) * import of work lists in ASCII format * extra key for programming from the office * gun barcode reader * 17” LCD monitor * Windows 7 professional operating system Panel introduction and handling by means of motorized vertical transfer with rollers and rubber-coated pressers for sealing of the panel during the workings, with a motorized carpet length of 2000 mm, with speed regulation electronically adjustable with converter. The photocells and the NC program guarantee the introduction of one or more Gtodpfxsl Ikzge Aabjt panels in sequence using selector. Panel height reading system consisting of an independent axis able to read the panel height before getting into the car. Size reading tolerance +\- 0.15 mm. In case the tolerance is exceeded a message will inform the operator and the machine will stop the operation in progress. Panel thickness reading system using a mechanical feeler Horizontal vice - M.O. axis which allows the thickness of the workpiece to be established from the program. Vertical vice - M.V. axis which allows the program to establish the height dimension of the piece being processed. Chain - X axis - patent double section with laser photocells able to read the reference zero of the panel before carrying out the work. The double section allows you to carry out machining on the lower side of the panel thus having the possibility of work the panel on 6 sides. Brushless motors with programmable speed regulation by NC. Drilling unit with independent spindles 7 + 17 x 32 mm 24 independent spindles with 32 mm pitch arranged as follows: * 7 spindles aligned in X axis * 17 spindles aligned in Y axis Unit driven by a high-frequency motor that allows the rotation change of the spindles up to 7000 RPM The Brushless motor allows drilling depth control and forward speed control. Upper revolver milling group with 10 positions and tool change controlled by NC. 11 KW motor with direct transmission of movement to the tool up to 18000 RPM. The rotation of the revolver generated by controlled axis with Brushless motor allows quick tool change. 10 aggregate heads included in the revolver Automatic lubrication 180° panel translation and rotation system Movement and rotation system of the panel arriving from the machine which allows unloading or rotation of the panel and the return to the machine for machining on both surf