Universal tool milling machine Kunzmann WF 9 CNC

Kunzmann WF 4 CNC

1997

good (used)

€23,000

Tool room milling machine

Call

Well-maintained tool milling machine from a mold shop for sale, machine will be used here until the end of October and is ready for demonstration under chipping and can be tested. x-travel 400 mm y-travel 320 mm z-travel 400 mm Control HEIDENHAIN TNC 410 Spindle speeds - infinitely variable 0 - 4000 rpm Quill stroke 60 mm Tool holder SK 40 Table clamping area 650 x 350 mm Workpiece weight 250 KG Total power requirement 6.5 kW Machine weight approx. 1.8 t Electric handwheel HR 410 3D probe MP 11,...

Listing

Blumberg

7972 km

Kunzmann WF 4 CNC

2003

excellent (used)

Call

Universal tool milling machine Kunzmann WF 4 CNC , year 2003 Heidenhain TNC 530 i XYZ : 400 x 350 x 400 mm speed 5000 1/min SK 40 Programmable coolant nozzles Bema 99utyzk

Listing

Solingen

7677 km

Kunzmann WF 600 CNC

2012

excellent (used)

€55,000

Univ. NC tool milling machine

Call

Very well maintained tool milling machine from a mold shop for sale, machine will be used here until the end of October and is ready for demonstration under chipping and can be tested. X-travel: 610mm, y-travel: 450mm, z-travel: 400mm, speed: 1-5000/min, clamping surface dimensions: 800x425mm, max. workpiece weight: 300kg, tool holder: SK 40, connected load: 15kVA, controls: Heidenhain TNC 530 , Weight: 2t, with ribbed cast construction in compound slide design, flat guide, longitudinally, trans...

Listing

Hessisch Lichtenau

7826 km

KUNZMANN WF 3/4

1998

used

€18,000

Call

Univ. NC tool milling machine KUNZMANN type WF 3/4 Machine. No. 341020 Year of construction 1998 travel X: 400 mm Y: 320 mm Z: 400 mm table size 650 x 350 mm 3o29j0q3wb spindle admission SK 40 spindle speed 40 - 2500 rpm. feeds X, Y and Z-axis 0 - 1000 mm/min. infinitely variable rapid traverse X, Y- axis 4000 mm/min. rapid traverse Z-axis 3000 mm/min. Pinol adjustment vertical 60 mm Drive power spindle motor 3 KW Mains connection 400 Volt, 50 Hz - CNC line control Heidenhain TNC 124 - Spindle s...

Listing

Göppingen

7984 km

Milling Machine, universal

KUNZMANN WF 7 - TNC 355

used

Call

z-travel:380 mm y-travel:400 mm x-travel:500 mm tool taper:SK 40 vertical head swivelling:beidseitig 90 Grad table-size:LxB 700x425 mm dimensions of the machine ca.:2x2x2 m quill stroke:60 mm groove width:14H7 mm E87wjon flute distance:63 mm weight of the machine ca.:2 t total power requirement:10 kW Speed range of live tooling:5 - 3000 min -1 Loading:max. 250 kg clamping slots:6 power capacity - milling spindle:5,5 kW

Listing

Niederhelfenschwil

(dealership location)

8036 km

KUNZMANN WF 4/3

2004

used

Call

CONTROLS .. CNC controls HEIDENHAIN WORKING RANGE -CUBIC- .. X-axis travel: 400 mm .. Y-axis travel: 320 mm .. Z-axis travel: 400 mm TABLE .. table surface (left-right): 650 mm .. table surface (front-back): 350 mm .. workpiece load (max): 1300 kg SPINDLE / HEAD .. spindle revolutions (min): 40 /min .. spindle revolutions (max): 2500 /min .. tool fixture: ISO SK 40 .. drive power: 3 kW AXIS DRIVES .. rapid traverse X: 4000 mm/min .. rapid traverse Y: 4000 mm/min .. rapid traverse Z: 3000 m...

Listing

Ahaus

7617 km

KUNZMANN WF 4/3 TNC 124

1996

used

Call

x-travel 400 mm y-travel 350 mm z-travel 400 mm tool taper SK 40 spindle turning speed range 1,0 - 4.000 U/min feeds 0 - 2000 mm/min quill stroke 60,0 mm table-size 650 x 350 mm T-slots 14 H7 Control TNC 124 engine output 5,5 kW weight 1800 kg dimensions of the machine ca. 2000 x 1000 x 2100 mm New price ~ 55.000 euros (!!) Furnishing : - Universal tool milling machine - HEIDENHAIN pattern control TNC 124 - The control panel can be swiveled to the right of the machine - hydraulic tool ch...

Listing

Wiesbaden

7810 km

Tool milling machine

KUNZMANN WF 5/3

1990

ready for operation (used)

Call

table mounting size: 350 x 700 mm Btyxoc9rwj x-axis: 500 mm y-axis: 320 mm z-axis: 400 mm spindle retainer: SK 40 spindle rotations: 30 - 2500 rpm operating voltage: 380 V total energy requirement: 2,2 kW space needed: 1500 x 1500 x 1800 mm weight: ca. 1700 kg

Listing

Walzbachtal

7899 km

Kunzmann WF 7/3 TNC 310

1998

good (used)

€15,000

Call

Machine bought used and overhauled from Kunzmann in 2001, since then hardly run. Working range: longitudinal mm 600 / transverse mm 400 / vertical mm 400 main drive kW 5,5 Huvxwvo speed range min-1 1 - 5000 tool holder ISO 40 feed range mm/min up to 2000 rapid traverse mm/min 7500 Contouring control TNC 310 Weight approx. kg 2200 Year of manufacture 1998

Listing

Malsch

7893 km

KUNZMANN WF 4

1999

used

Call

x-travel 400 mm y-travel 320 mm z-travel 400 mm Control HEIDENHAIN TNC 410 spindle turning speed - stepless 0 - 4000 U/min quill stroke 60 mm tool taper SK 40 table surface area 650 x 350 mm total power requirement 6,5 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,5 x 1,8 x 2,0 m Ftshluy9e Electric handwheel HR 410 Probe MP 11, automatic tool measurement TT 120 Cabin, tool holders,...

Listing

Feucht

8032 km

Machining Center - Vertical

Kunzmann WF 4/3 TNC 124

2008

reconditioned (used)

Call

Universal tool milling machine Make: KUNZMANN Model: WF 4/3 Year of construction: 2008 - partly overhauled, new painted, RAL7035 light grey / RAL3027 raspberry red Machine no.: 344349 warranty: 6 months Geometric acceptance with test report accessories: - HEIDENHAIN TNC 124 linear control - Electronic handwheel HEIDENHAIN HR 410 - fixed table 650 x 350 (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tightening system DIN 69872 - Central lubrication, electric - Coolant device - chi...

Listing

Trittau

(dealership location)

7709 km

KUNZMANN WF 650

2007

used

Call

x-travel 650 mm y-travel 500 mm z-travel 450 mm Control Heidenhain iTNC 530 main spindle: max. turning speeds 6.500 min/-1 drive capacity - main spindle 10/19 kW work table: table surface area 1100 x 600 mm max. table load 450 kg T-slots 8 x 14 (H7) tool changer: tool taper SK 40 number of tool places 38 Pos. change-time tool to tool ca. 10 sec change-time chip to chip ca. 5 sec feeds: feed range bis zu 25 m/min weight of the machine ca. 5,5 t Bs87f7j9dz The machine can be viewed under...

Listing

Köln

7690 km

Universal tool milling machine

KUNZMANN WF 5

1989

used

Call

x-travel 500 mm y-travel 360 mm z-travel 420 mm Cazzytvzbe control Heidenhain 355 handwheel tool taper SK 40 weight of the machine ca. 1,7 t

Listing

Kirchheim unter Teck

7973 km

Kunzmann WF 650 - 840D

2007

not inspected (used)

Call

Listing

Bühl

7895 km

Tool Room Milling Machine - Universal

KUNZMANN WF 650

2005

used

Call

x-travel 650 mm y-travel 500 mm z-travel 450 mm table surface area 1000 x 600 mm spindle taper SK 40 spindle turning speed range 5 - 6500 U/min quill stroke 60 mm vertical head swivelling +/- 90 table load max. 400 kg feeds longditudinal/cross/vertical 0 - 4000 mm/min rapid traverse 25 / 25 / 20 m/min distance table / vertical spindle 100 / 550 mm distance table/horizontal spindle 270 / 720 mm no. of tools in magazin 20 tool diameter 95 mm wotkpiece diameter with 2 vacant positions 135 mm too...

Listing

Trittau

7709 km

Universal milling and drilling machine

Kunzmann WF 7/3

1996

excellent (used)

€11,000

Call

Universal milling and drilling machine Fab. KUNZMANN Typ. WF 7/3 Year 1997 Technical data Make: Kunzmann Type: WF 7/3 Year of manufacture: 1997 X - axis: 600 mm Y - axis: 400 mm Z - axis: 400 mm clamping surface: 800 x 425 mm Clamping grooves 6 distance between grooves 63 mm max. load 250 kg tool holder: SK 40 quill stroke vertical 60 mm head swivels 90° on both sides drive power 4 kW dimensions: approx. L 2.0 x W 2.0 x H 2.0 m Weight: approx. 2.0 t (incl. control cabinet and swivel desk) Eq...

Listing

Feucht

8032 km

CNC universal milling machine

Kunzmann WF 4/3 TNC 124

2002

reconditioned (used)

Call

Universal tool milling machine Make: KUNZMANN Model: WF 4/3 Year of construction: 2002 - partly overhauled, new painted, RAL7035 light grey / RAL3027 raspberry red Dkgz0p RAL7016 anthracite gray Machine No.: 344025 Warranty: 6 months geometric acceptance with test report Accessories: - HEIDENHAIN TNC 124 linear control - HEIDENHAIN HR 410 electronic handwheel - HEIDENHAIN KT 130 electronic 3-D touch probe For measuring the workpiece position for determining workpiece datums for measur...

Listing

Weiterstadt

7845 km

Milling machine

Kunzmann WF 7-3

1991

used

Call

Milling machine WF 7-3 Tool holder Sk 40 DIN 2080 Bvg2d3c7v2 Swivel tilting table Hydr. tool clamping

Listing

Berlin

(dealership location)

7943 km

Milling Machine

Kunzmann WF 600 MC

2015

ready for operation (used)

Call

X-travel: 610mm, y-travel: 450mm, z-travel: 400mm, rotational speed: 1-5000/min, clamping surface dimensions: 800x425mm, max. workpiece weight: 300kg. workpiece weight: 300kg, tool holder: SK 40, connected load: 15kVA, controls: Heidenhain TNC 620, weight: 2t, with ribbed cast construction in cross-slide design, flat guide, hardened longitudinally, transversely and vertically, recirculating ball screws in all axes, double-secured metal covers for recirculating ball screws and flat guide, distanc...

Listing

Reiden

7976 km

Kunzmann WF 4/3

2007

good (used)

Call

X-axis 400 mm Y-axis 350 mm Z-axis 400 mm spindle speed 4000 rpm table length 650 mm table width 350 mm table load 250 kg feed X-axis 5000 mm feed Y-axis 5000 mm Z-axis feed 4000 mm Line quill 60 mm Qb2sx Fast feed speed 0 - 2000 mm Length x width x height 1500 x 1800 x 1900 mm Weight 1500 kg

Listing

Heilbronn

7927 km

universal Tool Room Milling Machine

Kunzmann WF 7/3

2001

good (used)

Call

Heidenhain TNC 310 cnc control electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 600 mm Querweg (Y-Achse) / Y-travel cross 400 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Werkzeugaufnahme / spindle taper SK 40 Drehzahlbereich / spindle speed range 60-5000 UpM Chqlskz9g8 Vorschub / feed 0-2000 mm/min. Eilgang längs + quer / rapid feed x/y 5 m/min. Eilgang senkrecht / rapid feed z 4 m/min. Antriebsleistung gesamt / drice capacity 7 kW...

Listing

Trittau

7709 km

Milling machine

Kunzmann WF 5/3

1990

excellent (used)

€9,900

Tool room milling machine

Call

Make: Kunzmann Type: WF5/3 Year of construction: 1990 X - axis: 500 mm Y - axis: 360 mm Z - axis: 420 mm Clamping surface: 700 x 350 mm Bhq2io2s3o tool holder: SK40 spindle bore: 22 mm quill stroke: 60 mm Dimensions: approx. W 1.50 x D 2.40 x H 1.90 m Weight: approx. 1.6 t All information without guarantee. The machine is in a very good condition. A demonstration is possible at any time in our exhibition hall.

Listing

Waiblingen

7958 km

KUNZMANN WF 7/3

1997

excellent (used)

Call

Heidenhain control TNC 124 Paths X/Y/Z= 600/400/400 mm P3bomty spindle 4.500 rpm max. tool holder SK 40 clamping area table: 650 x 395 mm max. load: 250 kg electr. handwheel Documentation

Listing

Remchingen

7904 km

Universal milling and drilling machine

Kunzmann WF 7/3 TNC 124

2002

refurbished (used)

Call

Technical data: HEIDENHAIN TNC 124 linear control working range longitudinal X-axis 600 mm transverse Y axis 400 mm vertical Z axis 400 mm Speed range Cguv9ai2pl horizontal and vertical spindle 1 - 4500 min.-1 infinitely variable weight approx. 1800 kg Potentiometer for feed speed angular table, rigid Clamping surface 800 x 425 mm Electronic handwheel Heidenhain HR 410 Attachment kit edge finder KT 130

Listing

Beringen

7984 km

Vertical machining center

KUNZMANN WF 650

excellent (used)

Call

With B axis Working travels 650 x 500 x 450 mm Table size 1000 x 600 mm Spindle taper ISO40 Spindle speeds -12'000 rpm Tool changer 20 Pos. Control HEIDENHAIN iTNC-530 Coolant through spindle Tool measuring system Heidenhain TT140 3D measuring tracer Heidenhain TS640 MARCELS MASCHINEN CH Gfzuis9

Listing

Waiblingen

7958 km

Tool room milling machine

KUNZMANN WF 7/3

2000

excellent (used)

Call

Heidenhain control TNC 124 paths X/Y/Z = 600/400/400 mm speed 58-3700 rpm 5,5 kW fixed angle table 800 x 425 mm coolant device electr. handwheel Mwzpz0 chip splash guard cabin machine light

Listing

Remchingen

7904 km

Universal milling and drilling machine

Kunzmann WF 4/3 TNC 310

2004

refurbished (used)

Call

Technical specification: HEIDENHAIN TNC 310 contouring control working range longitudinal X-axis 400 mm transverse Y axis 320 mm vertical Z axis 400 mm horizontal and vertical spindle - speed range 1 - 4.500 rpm Cguac8o3b8 - infinitely variable feed (rapid traverse) X-, Y-, Z-axis up to max. 5 / 5 / 4 m/min infinitely variable Weight approx. 1,800 kg Universal clamping table Swivels around 3 axes Table surface 650 x 395 mm Electronic handwheel Heidenhain HR 410 Integrated axis selec...

Listing

Ubstadt-Weiher

7892 km

Kunzmann WF7CNC

1993

excellent (used)

€17,500

Call

Tool milling machine Kunzmann WF7 CNC with Heidenhain TNC 407 contouring control from research center TOP Technical data: >> Year of construction 1993 Machine-No.370079 >> Rigid angular table Baqt32mgfk9 >> Speed: 4 steps infinitely variable up to 4000 rpm >> feed stepless in 3 axes >> Travels X/Y/Z: 600/400/400 mm >> rapid traverse in x/y/z >> table surface:800 x 425 mm >> table load: 300 kg >> quill stroke vertical: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening...

Listing

Ubstadt-Weiher

7892 km

3-axis CNC milling machine vertical

Kunzmann WF7/3

2008

excellent (used)

Call

Tool milling machine Kunzmann WF7/3 with Heidenhain TNC 320 contouring control Super CONDITION CE conform !!! Technical data: >> Year of construction 2008 Machine-No.370718 >> Milling table clamping surface 800 x 425 mm Dexxrhp3ct Clamping grooves 6 slot width 14 H 7 groove distance 63 mm maximum load 300 kg >> Speeds up to 4500 min-1 >> Feed range up to 2000 mm/min. Rapid traverse up to 5000 mm/min. >> Travels X/Y/Z: 600/400/400 mm >> Vertical quill and horizontal qu...

Listing

Augsburg

8081 km

Mikron WF 21 D

1988

good (used)

Call

Control Heidenhain TNC 151 XYZ 450 x 400 x 400 mm table dimension 450 x 300 mm rpm. 40-4000, 21 speed steps tool holder ISO 40 connection approx. 8,7 kW LWH approx. 2410 x 2695 x 2000 mm weight approx. 2,5 to Beck9phgffk

Listing

Jonschwil

8031 km

CNC Milling Machine

MIKRON WF 40 C

1987

excellent (used)

Call

Travel X/Y/Z 600/600/460 mm, 21 speeds 31,5 - 3150 U/min, motor 4,0 KW, spindle ISO 40, control Heidenhain TNC 155, table size 900x550 mm, hydraulic tool clamping, coolant device, spash guard, rapid feed, horizontal milling device, tilting turning table, clamping set, machine feet, manual, TOP condition B2nl29lth0

Listing

Kornwestheim

7946 km

CNC Lathe and Swiss Type

Traub TNL20-9

2018

excellent (used)

Call

CNC automatic lathe and CNC long lathe for turning and milling TRAUB TNL 20-9 Commissioning 9-2018, single-shift operation Design for long and short turning operation Control TX8i-s V8 19" MultiTouch screen and electron. Handwheel Main spindle D20 as motor spindle. Z-C axis. Speed max. 10.000 rpm power 5,5 KW Z-travel as short lathe 80 mm Z-travel as long-turner 205 mm Counter spindle D20 as motor spindle X-Z-C axis. Speed max. 10.000 rpm power 5,5 KW with integrated flushing unit turret...

Listing

Hessisch Lichtenau

7826 km

CNC tool machine

MIKRON WF 21 D

1990

used

€7,800

Call

CNC tool milling machine MIKRON type WF 21 D CNC path control Heidenhain TNC 355 Machine No. 5241010 Year of construction 1990 travel X: 450 mm Y: 400 mm Z: 400 mm table size 700 x 350 mm spindle mounting ISO 40 spindle speed 40-4000 rpm. 21 steps Bc9vahvgwg feed 2-3000 mm/min. rapid traverse X and Y 6000 mm/min. rapid traverse Z 5000 mm/min. Pinol shift 90 mm distance table - spindle nose max. 450 mm Main spindle drive 3,3 and 4 kW - Splash guard table enclosure - coolant system - central lubri...

Listing

Wiesbaden

(dealership location)

7810 km

Waterjet cutting machines

MIKRON WF 41 C

1987

used

Call

table mounting size: 500 x 1000 mm movement x: 630 mm movement y: 500 mm movement z: 460 mm tailstock stroke: von Hand 45 mm spindle taper: ISA 40 spindle turning speed range: 31,5 - 3150 rpm Yupphopd carriages continuously adjustable: 1 - 3000 mm/min rapid move: x/y 6 / z 4 m/min electrical connection: 380 V, 6/8 kW space needed: 1800 x 2120/2600 x 2020 mm weight: 3100 kg control: HEIDENHAIN, TNC 155

Listing

Lithuania

8275 km

Waterjet Italy WF 1630 CNC

2003

ready for operation (used)

Call

Control Unit Brand MAGELIS Movement X-Axis Movement 3000 mm Y-Axis Movement 1600 mm Workpiece Workpiece X 2000 mm Workpiece Y 3000 mm Media Pump drive power 4,1 bar This Waterjet Italy WF 1630 CNC Waterjet cutting machine was manufactured in the year 2003 in Italy. It is equipped with a MAGELIS control unit. Application Types Water Cutting Nb0b02

Listing

Haiger

7769 km

CNC Milling Machine 5 Axis

Mikron WF 52 D

1995

ready for operation (used)

€9,500

Call

x-way 800 mm y-way 500 mm z-way 460 mm table size 1000 x 500 mm spindle mounting ISO SK 40 spindle speed - stepless 31,5 - 6150 rpm operating voltage 380 V CNC control heidenhain 425 D7fzpyvq rapid traverse 6000 mm/min quill stroke 90 mm coolant tank l total power requirement 13,5 kW machine weight approx. 3,1 t space requirement approx. 2,20x2,70x2,35 m hydraulic tool clamping full 4th axis + 5th axis +45° -20°

Listing

Bochum

7669 km

CNC press brake

LVD LVD PPEB-9 220/42

1999

good (used)

Call

Hydraulic press brake, 220 to. With LVD touch control, laser safe, modular stops, without tools LVD PPEB-9 220/42 CNC- New in 2017 LVD TOUCH-B Pressure 2000 kN Working length 4270 mm Distance between the posts 3850 mm 9biz9cypw0 Distance table - ram 585mm Approach speed 100 mm/s working speed 9,6mm/s return speed 113 mm/s Weight 18000 kg Motor 22 kW Immediately available

Listing

Neubrandenburg

7865 km

CNC Lathe

ANAYAK Anamatic 9

1997

excellent (used)

€13,500

CNC Intorex TMC 3000 Maschining centre 8 (9) axis

Call

Vertical CNC milling center ANAYAK ANAMATIC 9 Year of construction 7/97 Currently dismantled and prepared for transport. The machine was in production until mid-2022 immediately available and ready for use Bax3zgszahs Technical parameters: Working table length 1300 mm Working table width 530 mm Maximum table load (even) 500 kg Number of tools in the storage container 30 pieces Minimum vertical spindle speed 70 rpm Maximum vertical spindle speed 5000 rpm Mechanical feed length axis X 1070 m...

Listing

7694 km

Intorex TMC 3000

2010

used

Call

Max. working lenghts 3000mm Max working square 220x220mm Max. working diameter 450mm (when wood round) Stroke axis X 3800mm Stroke axis Y 460mm (plus 230, minus 230) Stroke axis Z 510mm Stroke axis Y2 360mm (turning) Stroke axis Y3 360mm (milling) Stroke axis Y4 360mm (sanding) Stroke axis B (rotary +/- 90Â°) Power: Axis A (rotary main motor) 22,2 kw 0-1500 upm Coqvce7d Axis Y2 11kw 1000-4500 upm Axis Y3 11kw 1000-6000 upm Axis Y4 2,2 kw 3000 upm max. 24.000 upm Electrospindle (HSC) 12 kw ...

Listing

Wiefelstede

7607 km

Control panel/CNC control

Heidenhain Mikron TNC 155 WF 51C/155

used

Call

CNC control, control panel, machining center -Manufacturer: Heidenhain, control panel/CNC control from CNC milling machine Mikron WF 51C/155 -Control: Heidenhain TNC 155 -Individual components: see photos -Dimensions: 660/640/H610 mm Csaqcifjly -Weight: approx. 73 kg

Listing

Hessen, Deutschland

7829 km

CNC uni. Tool milling and drilling machine

MIKRON WF 41 C/155

1985

excellent (used)

Call

Control: CNC path control incl. screen Heidenhain TNC 155 TECHNICAL DATA Working range X-axis 630 mm Y-axis 500 mm Z-axis 460 mm Mounting height table vertical milling head max. 559 mm Clamping table Clamping surface vertical 397 x 550 mm Angular table Inrdkw78 table clamping surface 500 x 1000 mm Drive power 6.0/8.0 kW speed range 31,5 - 3150 rpm Tool holder (with feed groove) ISO 40/M 16 EQUIPMENT/ACCESSORIES  Swiveling vertical milling head, rotatable by 90°.  Vertical/horizontal mac...

Listing

Tuřanka 1319/104, 627 00 Slatina, Czechia

8356 km

Horizontal Boring Mill - Floor Type

Fermat WF 13 R CNC

2023

new

Call

New machine ready for pre-acceptance 4 months from the first payment Control: Siemens 840DSL (can be Heidenhain TNC 640) Spindle diameter: 130 mm Head: UHAmi 30 X-axis: as required Y-axis: 3500 mm Z-axis: 700 mm W-axis: 800 mm V-axis: 2400 mm Main motor power: 41 kW S1 Table dimensions: 2000 x 2000 mm T50 (can be changed) Max. table load: 50 t ATC 32 HV (can be 40) S7exj Internal cooling: 70 bar

Listing

Haiger

7769 km

CNC tool milling machine

Mikron WF 32 C

1996

good (used)

€9,950

Call

Universal CNC Tool Milling Machine from Mikron apply for toolmaker , mold maker, education and Locksmith Travel 600x600x450mm Control Heidenhain TNC 425 Control CNC Heidenhain TNC 350 Table 900x530mm Travel (X,Y,Z -Achse) 600x600x450mm Toolchanger 22 piece Spindle: ISO 40 Br80kmcu Speeds: 20-6300U/min Feeds 0-6000mm/min Power supply 50 Hz 3x 380V Motor 5KW

Listing

Staufenberg

7810 km

Internal and external cylindrical grinding - Hard machining

MIKRON WF 21 C Heidenhain TNC 155

1986

good (used)

Call

CNC milling machine make MIKRON type WF 21 C Year of manufacture 1986 Technical data: Travel X-axis 400 mm traverse path Y-axis 400 mm travel Z-axis 400 mm 21 speeds stepless 31,5 - 3150 rpm. tool holder ISO 40 M 16 with feed groove quill movement vertical 90 mm Feed rate in all 3 axes 2-3000 mm/min rapid traverse speed X- and Y-axis 6000 mm/min rapid traverse speed Z-axis 5000 mm/min Qqigx electrical connected load 8,7 kW dimensions 2900 x 2650 x 2000 mm weight approx. 2300 kg with - rigid ang...

Listing

Bad Friedrichshall

7924 km

Bahmüller B 45-9 CNC

2005

excellent (used)

Call

Technical data: (Tehnical data) Operation:Internal and external Griding (Operation:Internal and external Griding) Number of axis: 6 axis X1-Z1-X2-Z2-B1-P01 Pp0ur (Number of axis) X1-Z1-X2-Z2 are Hydrostatic axis P01 is internal loader B01 is work piece spindle Working area: mm 200-200-100 (Working area) Number of working spindle: 1woek piece-1internal griding-1external griding (Number of working spindle) Number of tool: 2 (Number of Tools) Tool holder: External wheel max.500mm and in...

Listing

Wiefelstede

7607 km

Power board CNC control

Heidenhain Mikron PL 110 B WF 51C/155

used

€550

Call

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, Power board -Manufacturer: Heidenhain, power board CNC control from CNC milling machine Mikron WF 51C/155 -Type: PL 110 B -ID No.: 223 216 05 -Voltage: 24V Csoms38zhk -Dimensions: 395/245/H60 mm -Weight: 2.3 kg

Listing

Staufenberg

7810 km