Your location was not recognised (Change)
Specify address
or
move
Granulators REDOMA GA 37-650
The granulator GA 37-650 is suitable for the old cable preparation, granulation of plastic, wood and other soft materials. The granulator is powered by a 37 KW engine via v-belt. In addition, it has a flywheel. The robust rotor shaft with five misaligned rotor stars ten rotor blades are located. The two 690 mm long stator knives are fitted in the housing. The granulator GA 37-650 is supplied ready for connection to a massive machine table and can simply be placed on a paved floor. Technical da... more
Compounding line ALPHATEC AD-S 50.44
screw size 52 mm Capacity 300 kg/h Drive 45 kW L/D 44 L/D more
Granulator Atik Aschaffenburg
Pellet Atik Aschaffenburg 150-200 kg / h carbide knife, very robust body proportions about height 140 cm, width 105 cm, depth 80 cm The granulator can be visited nearby Görlitz. more
granulating lines Starlinger Recostar 85 Basic
Drive ûnbkt. kW screw size unbkt. mm screw length unbkt. L/D material Capacity kg/h more
Granulator DS

Granulator DS

Sveti Ivan Zelina Croatia
USED
Used granulator G 800/1200 110 kW (wet cutting) 5 rows of the rotor. Application: cutting of PET Bottles, LDPE, HDPE 10 pcs. rotor knives 600 mm length each 4 pcs. stator knives 600 mm each length The machine is for a renovation but we will do this. (Granulator + Feeding Belt Conveyor + Discharging Auger) The machine is equipped with Brand new discharging auger (screw conveyor) and Brand new feeding belt conveyor. After the renovation the granulator will be like new. Readiness for shipment after... more
Cable granulator MG Matrix 400
Matrix 400 cable granulation system for recovering clean copper from any type of cable. It can granulate cable at a rate of 350kg/h to 450kg per hour depending on cable type. The line we have available also includes a pre-shredder from which material is fed into a granulator via a feeding conveyor. The conveyor is equipped with a magnet to remove ferrous component. The granulated material is then processed by a pulverising mill and out via an air separator. Matrix cable granulators are now the ... more
REDOMA  K 500-H Firefox REDOMA K 500-H Firefox
The old cable plant RETO K 500 - H Firefox is suitable for smaller up to medium cable volume of several hundred tons per year. The plant is turnkey supplied and need be made only on a floor and connected to a transformer. It can be expanded later slightly if necessary with a granulator or a pre-shredder, doubled the throughput and efficiency increases. Technical data: Average Kapazit&Atilde &curren t(Mischkabel) 0.5 t / h The highest point of the system: 3.80 m Floor space for the plant: 30 ... more
Granulating line EXTRUDEX SRE 80 single screw
screw size 80 mm Capacity bis 120 kg/h Drive 35 kW L/D 30 L/D engl.: complete granulating line for low bulk-weight materials like E-PS incl. strand-pelletizing equipment, very less operating 7000 hours The line is ready for demonstartion/test-run in our worlshop Wuppertal-Germany Date shortly by appointment more
Recycling machine NGR S-Grand 85
For recycling of PE, PP, PS, PA, ABS, LDPE, HDPE, MDPE. Screw diam. 85mm. Output up to 400 kg/h. Metal detector, hot granulation die face cutter, shredder-extruder combination, double piston hydraulic change filter, water bath, centrifuge, extraction blower, cyclone and Big Bag loading station. In good working conditions. more
Cable recycling Granulator  Stokkermill
Machines of Compact Series are projected to fulfill the needs of clients whom want to recover copper, aluminum cables and radiators. Main Features •Safe, fast, robust, reliable and easy to use. •Grinding mills with 3 rotating blades and 2 fixed blades. •Dry separation using vibrating table. •Dust Filtration system. •Grinding mill soundproof – silent technology. Technical data Power: 22 Kw Overall dimensions: 1500 x 1750 x 2150 mm Weight: 1250 Kg Production 150-250 Kg / h (The produ... more
Cable recycling plant GUIDETTI
Capacity 900-1100 kg/h Power 48kW Weight 3000 kg Length 4050 mm Width 2600 mm High 3150 mm ONLY 600 working hours Produced in 2011. more
Cable Granulator and Seperation Plant   RMH 6 D/Wagner WS 15
Granulator and Seperation Line RMH 6 D with Conveyer Belt, permanent Magneticsystem and pre Shredder WS 15 Details: RMH 6 D Granulator and Seperation Cutting Mill: V Cutting Geometrie Drive: 30 KW Dimensions LxBxH [mm]: 2500 x 1500 x 2800 Drive complete; 38,6 KW Weight: 3200 kg Wagner WS 15 Pre Shredder Drive: 15 KW Working room: 675 x 600 mm Rotor lenght: 675 mm Blades: 44 Stueck Rotordiametre: 308 mm Hopper: 1.400 x 1300 mm Dimension: 2040 x 1850 x 1825 mm Weight: ca. 1.400 kg With two con... more
Plastic grinder BI-Cutter granulator SRS SR-68
Plastic grinder BI-Cutter granulator Without display BI cutter granulator. Manufacturer: SRS Type: SR-68 motor data Nissen TET12 0.4kW 230 / 460V 60Hz 1.56 / 0.78 speed: 1690 / min is added to size: 6 "x 8" S-blade speed: 15 / min rotary cutter speed: 45 / min finished goods size: 4 * 5mm more
cable granulation IRS Italia Recycling System Separa Easy 120 V
Rotor diameter: 24 pieces (new) Stator: 2 (new) hole sieves: 2 mm, 3 mm, 4 mm (new) Motor power: 6,5 kW throughput 80 - 120 kg depending on the screen size and cable sorting Cable diameter: max. 20 mm Dimensions: 1.7 x 1.3 x 2.2 m Weight: 1200 kg Drum bearings are renewed. The machine uses little power and is compared silent and easy to operate. more
A small pellet mill 2 x 300 kg/h with two presses and hammer mill. No dryer. Im Stock. more
Granulator Cable recycling  Stokkermill EF1100plus 11kw
Technical data Power 11 kW Overall dimensions 1060 x 1700 x 2000 mm Weight 800 kg Production(Input) 120-150 Kg / h (The production varies as a function of the grid and the cable Treaty more
Cable Granulator and Seperations Plant Gertrud Diebels RMH 2 D
Cable Seperation Plant RMH 2 D Granulator: 11 KW Drive Total: 19,6 KW Weight: 2.450 kg Capacity: 100-250 kg/with pre Shredder ca. 300 kg/H Optional is the delivery with pre Shredder possible. Whe can delivery different machines from stock. more
Angussgranulator cutting mills Rapid 1521A
Angussgranulator cutting mills screw model! Manufacturer: Rapid Type: 1521A Year: 1997 4.6 KW 230 / 400V 50Hz speed: 1440 / min Rotor speed: 150 / min rotor diameter: 160 mm rotation blades: 9 pieces yet knives: 2 pieces more
COPPER CABLE RECYCLING MACHINE  Dry method
COPPER CABLE RECYCLING MACHINE / SEPARATION SYSTEM / Dry method EUROPEAN PRODUCER TERRIER TYPE COMPACT YEAR OF CONSTRUCTION MACHINERY 2009 TOTAL POWER 22KW WEIGHT APPROX 2000KG POWER SHREDDER 15KW SHREDDER G300 / 400 INLET KNIFE 400MM x 300MM ROTOR TRANSIT 3 ROWS OF KNIFE MOVING 2 ROWS OF KNIFE FIXED EXTRACTOR PLASTIC WITH DEDUSTING EXTRACTOR FINE PARTICLE PLASTIC WITH SEPARATOR more
TIRE RECYCLING PLANT TPA TRIA 1000-1300 kg/h
TIRE RECYCLING PLANT Construction year 2011, started 2012 Products obtained : 16% Iron with impurities < 4% Textile fibres 4% Rubber granules from 2,5 to 3,5 mm. 40% Rubber granules from 0,8 to2,5% 25% Rubber powder <0,8 mm. 15% Total installed power : 450 kW Total used power in work around 300 Kw Input : 1500/1700 kg/h of mixed tires Output : 1000/1300 kg/h depending on granule size and tires type. For car and truck tires Granule size : 0.1 - 1.3 - 3.5 mm. diam.with suitable grids Compos... more
Tyre recycling plant  Shredding line
Tyre shredding line compound with different machine producers ( Nymby, Molinari, Gauss Magneti, Venanzetti,...) it has ben in function for only 3 years, capacity cca 15-20 t/h , power needed 1000 kW, surface needed 2000m2, GOOD CONDITION, CHEAP PRICE!!! more
Skeletal granulator 900 / TR-NS Tria 900/TR-NS
Manufacturer: Tria model 900 / TR-NS Skeletal granulator Year 2000 900mm wide 18.5kw motor more
Cable granulating systems Reto Redoma Redoma 400
Old cable plant compact consisting on base plate: granulator, separator, screw conveyors, exhaust and lower air blower, filter and control cabinet. more
Plastic grinder BI-Cutter granulator SRS SR-1013
Plastic grinder BI-Cutter granulator Without display BI cutter granulator. Manufacturer: SRS Type: SR-1013 engine data Yaskawa FECQ-T2 1HP 230V 60Hz 3.2 0,75KW speed: 1740 / min is added to size: 10 "* 13" S-blade speed: 18 / min Rotary Cutter speed: 60 / min finished goods size: 6 * 6 mm more
Copper Cable Granulator
Includes: - chopping section, - transfer to separation table unit, - separation table - small single dust collector; - large triple dust collector. Spare set of 21 rotation blades and 2 fixed blades, two different screens. 50 kg of pure copper per hour. In good working condition. The machine is located in Lithuania, can be seen working. more
Cable recycling Stokkermill SM1100EF
Machines of Compact Series are projected to fulfill the needs of clients whom want to recover copper, aluminum cables and radiators. Main Features •Safe, fast, robust, reliable and easy to use. •Grinding mills with 3 rotating blades and 2 fixed blades. •Dry separation using vibrating table. •Dust Filtration system. •Grinding mill soundproof – silent technology. Technical data Power: 8 kW Overall dimensions: 1060 x 1700 x 2000 mm Weight: 800 kg Production (Input): 80-120 Kg / ... more
bagging for PLASTIKGRANULAT
 American Hersteller.2 pieces on stock. There were also times a blind support. Depending on the bag length could werden.Die set in the perforated strip sack edition lacks jedoch.Der dispenser had a balance ADDnR stehen.Die sacks gestülpt.Siehe via pipe photo. more
Cable Separation Plant MG/RMH MG 220 T/RMR 170/400
MG 220 T Cable Separations plant with Turbo hammer mill Optional: -Conveyor belt new -Pre Shredder RMR 170/400_12 KW Drive -electrisches System to stop the Conveyor belt -Permanent Magnet with steel Construction different machines Comes new short delivery time more
cable plant mounted on base plate  Reto Redoma Reto K 500-H
Old cable plant mounted on base plate with granulator, separator, conveyors, exhaust and lower air blower, filter and control cabinet. more
Angussgranulator cutting mills Tria 20-15/BLT
Angussgranulator cutting mills Manufacturer: Tria type: 20-15 / BLT Year: 2000 230 / 400V 50Hz 1.5kW 6.8 / 3.9A power: 20-30 kg / h Rotary Cutter: 3 Still diameter: 2 Rotor Diameter: 150 mm Rotor speed: 220 / min more
cable granulation Alpine
Cable granulation / hobbyist conditioning granulator Alpine multipath separating table auger filter system more
Cable recycling Stokkermill SM3000 Turbo
Technical data Power: 40 kW Overall dimensions: 3070 x 1750 x 3450 mm Weight: 2250 Kg Production 250-350 Kg / h (production varies as a function of the grid and the cable Treaty) Stokkermill SM-3000T model is a compact and extremely reliable plant. It separates considerable quantities of material. Compact granulator for the grinding and the separation of copper and aluminium cables. Key Features: •The cyclone dust extractor system with an automatic filter cartridge cleaning system, which allo... more
Cable recycling plant I.R.S. Kabelrecyclinganlage Easy 180
Feed material: electrical cables without interfering throughput: up to 180 kg / h depending on the cable and strainer Power: 8.5 kW Dimensions (L x W x H) 1700 x 1300 x 2200 mm Weight: 1200 kg With demand can to the system anytime a cooling unit can be connected. Corresponding heatsink are already installed. Included: perforated screens 2 mm - 3 mm - 4 mm more
Vibrating screen vibrating plate compactor u u
Vibrating plate compactor vibrating shaker screen surface used about B-600mm L-1600 mm Screen size approx 22 x 22 mm bottom outlet 150 mm Connection for dust extraction above about 255 mm outlet opening 580 x 100 mm vibration motor OLI MVE type 700 / 15 230/400 V; 2.29 / 1.32 A; 50 Hz 0.62 kW; 1500 rev / min; 714 Fckg total approximately 2050 x 1000 H 1100 mm Weight approx 490 kg changes and mistakes in the technical data, specifications and prices subject to prior sale. more
cable plant mounted on base plate  u PowerCat
Old cable plant mounted on base plate with granulator, separator, conveyors, exhaust and lower air blower, filter and control cabinet. more
Angussgranulator cutting mills Tria 22-20/BLC
Angussgranulator cutting mills Manufacturer: Tria type: 22-20 / BLC screw model year: 1998 400V 50Hz 3kW power: 30-50 kg / h Rotary Cutter: 3 Still diameter: 2 Rotor Diameter: 162 mm Rotor speed: 280 / min more
Cable recycling plant, cable shredder Guidetti Sincro 315
The Sincro 315 Guidetti is a small recycling plant for the recovery of copper from old and residual cables. The machine impresses with its small footprint, simple operation and low energy consumption. The integrated filter system with rotary valve reduces the frequent emptying of anthers and the low height makes the material ball in. This system with the built in 2010 and has only about 500 hours of operation. It is very well maintained, there was little use and is in near mint condition. Belong... more
Granulator ARTECH SG80/160 DS2 315KW
Rotor: 1600 x 800 mm / 48 Knifes Stator: 2 x with automatic adjustment Power: 315 KW Weight: 32 t Hydraulik pusher The machine is currently beeing overhauld further technical data on request more
30 KW Granulieranlage IRS
A 30 KW cable granulation with cutting and turbo mill, used very little, with some technical changes. The machine is in excellent condition. The performance is approximately 200 to 250 kg per hour at a 4-screen. This machine is ideally suited for stranded by the turbo mill. The system can be demonstrated in labor input. Additional equipment for the plant can also be purchased from us. The original price of the plant amounted to 64,000 euros, are still various screens and knife sets in the price ... more
Cable recycling Line 350kg  Stokkermill Sm3000 Turbo PS500R260
Cable recycling Line 350kg. Stokkermill Granulator SM3000Turbo . Technical data Power: 40 kW Overall dimensions: 3070 x 1750 x 3450 mm Weight: 2250 Kg Production 250-350 Kg / h (production varies as a function of the grid and the cable Treaty Single SSchaft Shredder . Stokkermill PS500/260R Technical data Power: 15-22 kW Blades: 2 fixed and 22 sharp Dimensions: 30 x 30 mm Rotor dimensions: 500 x 260 mm Mouth Power: 580 x 1355 x 700 mm Overall dimensions: 900 x 2140 x 2120 mm Weight: 900-1100Kg C... more
Granulators REDOMA GA 75-10
The extremely reliable machine is ruggedly built and stands on a table with a steel base plate. The machine can be installed on a concrete floor. The grinding housing can two be hydraulically opened. As a result, the knife and the strainer are easily and quickly accessible. The granulator can depending on cable type with seven of the d = 3 mm to 25 mm are operated. Technical data: Stand area: 2380 x 1300 mm Height: 2470 mm Rotor length: 650 mm Cutting diameter: 500 mm Rotor speed: 530 r/m... more
Slowly Laufer Angussgranulator schneidmuehle Zerma GSL-180/300
Slowly Laufer Angussgranulator cutting mills direct drive via gear motor No adjustments by special rotor blades Easy accessibility for maintenance and cleaning Low noise and regrind due to slow rotor speed Universally applicable in connection with numerous options Manufacturer: Zerma type: GSL-180/300 years: 1997 4KW 230 / 400V 50Hz speed: 1420 / min -Feed slot size: 350 * 350mm cutting chamber size: 270 * 300mm rotor speed: 150 / min rotor diameter / width: 180 / 300mm rotary cutter: 30 pieces ... more
Cable recycling plant, cable shredder IRS IRS Italia C 180 Easy
The Compact 180 is a powerful recycling facility for the recovery of copper from old and residual cables. The machine impresses with its small footprint, easy operation and low energy consumption. After the C 120 Easy it is the nearest facility for hourly capacities of up to 180 kg (depending on material). This machine with the Year 2012, is perfect for cost-effective entry into the cable recycling. If desired, the system, thanks to electronic pre-installation, with Vorzerkleiner, feed conveyor,... more
Cable granulation Redoma PowerCat A
Set consisting of: 1 x task belt conveyor BC 500 x 3300/30 Mobil. Made of steel with 2 adjustable legs. PVC belt with side edges and drivers. Hopper, emergency stop button. Drum Motor 0.33 kW. 1 x 1 granulator GR 37-500L of the following main parts consisting of: stand, grinder housing with 2 stator blades, as well as inlet and outlet funnel, L = 500 mm rotor with 5 blades, V-belt drive with flywheel and engine 37 kW. Limit. Knife and sieve are easily accessible and can be replaced quickly. The ... more
Cable recycling plant Compact Easy180 I.R.S, Compact EASY180
Technical specifications Feed material: electric cable without interfering Throughput: about 80 to 180 kg / h Motor: Electric motors 8.5 kW Dimensions: (L x W x H) 1700 x 1300 x 2200 mm Weight: approx 1185 kg Included in delivery: knife set: 2 X completely perforated screens: 2 mm, 3 mm, 4 mm dust bag manual: German power (manufacturer) sieve 2 = 80 kg / h screen 3 = 150 kg / h sieve 4 = 180 Kg / h Features The Compact 180 is a powerful recycling plant for the recovery of copper and aluminum fro... more
Cable granulates plant  MG 220 Turbo Kompakt
This newly developed granulation plant is specially designed for processing fine copper cable such as telephone of communication cable. The offered plant is brand new and has only been in use for demonstration purpose. In feed capacity is from 250 to max 300 kg per hour. The installation is compactly built on a steel platform and plug & play ready! Technical details: Granulator: 15 kW. Turbo power: 7,5 kW. Fan air transport: 2.0 kW. Noise production: 78 – 95 db. Overall size: 2680x1045x2900 mm... more
Pelletizer  Automatik ASG-30/2
not ready, new engine is needed more
Cable recycling plant, cable shredder IRS Italia C 120 Easy
The Compact 120 is a powerful recycling facility for the recovery of copper from old and residual cables. The machine impresses with its small footprint, easy operation and low energy consumption. This machine with the Year 2012, is perfect for cost-effective entry into the cable recycling. If desired, the system, thanks to electronic pre-installation, with Vorzerkleiner, feed conveyor, stronger drive (for better performance), be retrofitted screening machine for Litzeabsiebung and / or cooling ... more
Save search

to

to

Change search