HYDRAULIC CYLINDERS

LIEBHERR

Year of construction: 2012, condition: used, max. wheel diameter 180 mm gear width ca. 220 mm max. module 3 / 5 mm Control Siemens 840D sl max. radial velocity 5000 mm/min max. workpiece diameter 180 mm table rotation speed 800 U/min table diameter 145 mm axial travel 250 mm mm axial travel 300 mm clamping force max. 13 kN swivelable +/- 45 ° drive capacity 23 kW turning speeds 6000 U/min diameter of tools max. 90 mm tool clamping length max. 211 mm module hobbing max. 3 module profile milling max. 5 tangential speed max. 7500 mm/min weight of the machine ca. 9,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m Equipment / Accessories: - The machine is equipped for dry milling. - workpiece magazine Lhsdpsymf Daofx Ab Tec - parallel gripper: - workpiece weight form-fit max. 15 kg - workpiece length max. 400 mm

Year of construction: 2009, operating hours: 11,300 h, condition: used, Field of application: Construction Lodpfx Aboh Ty Ars Tjhc Please contact Mohamad Fattah Ahmad for more information Preperation for grab use and oscillator MAN Engine LD 2842 LE 103 with 670 kW 2x 30To Winches with 36mm ropes 25 to hook Basismast, Mast: 2x 6m + Masthead

Condition: used, mileage: 45,700 km, Year of construction: 2005, Drivetrain Drive: Wheel Weights Empty weight: 36.000 kg Ledpeyl Huqofx Ab Tjhc Functional Lifting capacity: 45.000 kg Identification Serial number: 53517 Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: - Carrier engine: - Upper engine: - Upper hours: 23085 h Counterweight: 7000 Transport dimensions (LxWxH): 11.5x2.7x3.9 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2008, Technical details: max. wheel diameter: 300 mm gear width: 60 mm max. module: 5 weight of the machine ca.: 14 t table turning speeds: 80 - 200 U/min adjustment movement of the stroke: 400 mm length of stroke min./max.: 0-70 mm no. of strokes: 1500 Hub/min Lhsdpsxz Akfofx Ab Toc *

Year of construction: 2008, condition: ready for operation (used), Loading chamber dimensions: 280x580mm, loading height: 700mm, max. load: 300kg, with protective housing and documentation, machine was functional until the end, complete maintenance would have to be carried out on the machine, inspection is possible. Ljdpeqgfbgefx Ab Tshc

Condition: used, mileage: 53,318 km, lifting height: 110,000 mm, Year of construction: 2018, General information Field of application: Construction Serial number: 088666 Drivetrain Drive: Wheel Weights Lhedpfswz Ut Ijx Ab Toc Empty weight: 60.000 kg Functional Lifting capacity: 250.000 kg Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 15.86x2.99x3.99 Additional information Please contact PFEIFER GROUP for more information

Condition: used, mileage: 67,400 km, lifting height: 59,100 mm, Year of construction: 2018, General information Field of application: Construction Serial number: 076646 Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Functional Lifting capacity: 8.000 kg Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Lhsdpfx Aotr Nuqeb Tsc Carrier engine: - Upper engine: Perkins Counterweight: 0 Transport dimensions (LxWxH): 16.85x2.75x4 Additional information Please contact PFEIFER GROUP for more information

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 1276, CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New control system PLC SIEMENS S7 Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Lsdpeq U R T Nofx Ab Tohc Manipulator B max. displacement: 7150 mm Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Machine dimensions: Forging height over floor: 615 mm Total height pf the machinr over floor: 1665 mm Total machine lenght: 32670 mm Total foundation lenght: 33400 mm Tot. machine width (without auxliary equipments): approx 3885 mm Total foundation width: 16000 mm Total weight of the machine: 84.000 Kg

Condition: used, mileage: 159,620 km, Year of construction: 2006, operating hours: 28,594 h, General information Field of application: Construction Ledpfx Asylgxvsb Tohc Serial number: 53304 Drivetrain Drive: Wheel Weights Empty weight: 36.000 kg Functional Lifting capacity: 45.000 kg Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: - Carrier engine: - Upper engine: - Upper hours: 16348 h Counterweight: 0 Transport dimensions (LxWxH): 11.5x2.7x3.9 Additional information Please contact PFEIFER GROUP for more information

Condition: good (used), power: 100 kW (135.96 HP), fuel type: diesel, Year of construction: 2014, operating hours: 13,725 h, General information Lhjdpfx Absycl S No Tjc Year of manufacture: 2014 Field of application: Construction Technical information Number of cylinders: 4 Empty weight: 23.000 kg Dimensions (LxBxH): 865 x 255 x 316 cm Functional Mast length: 9 m Condition Technical condition: good Visual appearance: good Other information Emissions class: Stage IIIA Additional information Please contact Ferdinand Pater for more information

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. Ledpfx Aspugwijb Tjhc The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: used, Year of construction: 1998, operating hours: 13,258 h, 1998 | Liebherr L 522 with High-Tipping Bucket | Used Wheel Loader | 13258 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 12900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 54 inspection points 53 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Wheel loader Liebherr L522 with high dump bucket. the condition of the machine corresponds to the value of the operating hours. leakage hydraulic oil on one of the two chassis motors. at the time of inspection, the machine ran / functioned without any other abnormalities. the machine shows wear on bolts and bushings corresponding to the age and mileage and the purpose of use, as well as signs of use (dents, abrasions, etc.) and corrosion. the machine has not been tested under load. well maintained and serviced machine. ready for immediate use. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "32949 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals Ledpfx Aboyk Drwo Tehc ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, power: 230 kW (312.71 HP), gearing type: hydrostat, fuel type: diesel, overall weight: 31,000 kg, Year of construction: 2017, operating hours: 14,138 h, Equipment: air conditioning, all wheel drive, cabin, Liebherr L580 XPower wheel loader Year of manufacture: 2017 14,138 operating hours Quick coupler Lhodjymda Topfx Ab Tjc Bucket Air conditioning Good condition

Year of construction: 2000, condition: excellent (used), SMS MEER CNC DOUBLE SIDED CHAMFERING MACHINE Manufacturer: SMS MEER Type: RFA 14 Yom: 2000 Working range: tube Ø 21,3 – 114,3 mm Wall thickness 2,3 - 11 mm Length: 6-12m Ledeghrguopfx Ab Tehc Composed of two RFA14 chamfering machines with transport devices between the machines. The task of machines is to chamfer inside and outside both ends of the tubes. The range of diameters of chamfered tubes 21.3-114,3mm and wall thickness of 2.3-11mm in the length range of 6-12m. The task of transport in the area of the chamfering machines is to collect the tubes from the roller table and move them between the chamfering machines.

Condition: used, fuel type: diesel, first registration: 05/2018, Year of construction: 2017, operating hours: 12,770 h, Used Liebherr L576 X Power wheel loader – total weight 29,000 kg – operating hours 12,776 – engine 215 kW – speed 40 km/h – axle load distribution 15,500 kg – Lodpfx Aeyl Tr Ajb Tohc = More information = Unladen weight: 29,000 kg Reference number: 93 For more information, please contact Miguel Cubas. = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.