Stairway bridge

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1.073.14, TECHNICAL DETAILS Infeed table length: 8,360 mm Outfeed table length: 2,750 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 9,000 x 2,400 x 2,400 mm Weight: 2,500 kg Transport packages: 3 units Csdpfx Afjygilhjnsgn Voltage: 400 V Fuse: 25 A Power: 11.0 kW EQUIPMENT Automatic feed system

Condition: excellent (used), Year of construction: 2017, operating hours: 14,500 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter und Drehteller Hersteller: ARBURG Typ: 470S1100-400/290 Baujahr: 2017 Schließkraft: 110 Tonnen Holmabstand 420 x 420 mm Einbauhöhe min. /max.: 450 mm Öffnungsweg: 950 mm Schnecken DN 1: 35 mm Max. Hubvolumen: 154 cm³ Spritzteilgewicht: 141 g/PS Schnecken DN 2: 30 mm Hubvolumen: 106 cm³ Spritzteilgewicht: 97 g/PS Cgsdpfx Asu E E Sujfnsn Steuerung: SELGOCIA Ausstattung: 3 x Kernzüge Vertikale Spritzeinheit Drehteller 6 - ACHS Roboter, Hersteller: KUKA, Typ: KR 16 Wikut, Baujahr: 2010 Förderband Schutzzaun

Year of construction: 2003, operating hours: 70,263 h, condition: ready for operation (used), functionality: fully functional, overall weight: 182 kg, total length: 880 mm, total width: 660 mm, total height: 1,150 mm, machine/vehicle number: 14-21425, MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 880 x 660 x 1,150 mm Weight: 182 kg Operating hours: 70,263 h Cedsyf Dr Hepfx Afnjgn

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, load capacity: 100 kg, TECHNICAL DETAILS Payload: 100 kg Diameter: 150 mm to 850 mm Gripper function: tilt forwards-backwards 0–90° Gripper function: rotate left-right +90 / –90° MACHINE DETAILS Battery voltage: 12 V Codpfx Aoyf Dqiefnegn Battery capacity: 70 Ah EQUIPMENT Cable drum gripper SG 600 Du-Hy/So Note: The machine is sold without charging plug, battery, and charger.

Condition: good (used), 10,000 pieces Inserted gratings Gratings for pallet racks galvanized Inlay grids in different sizes, mesh sizes, load-bearing bar and weight load available: Negotiation price: from € 15,-- net per m² from stock Larger quantities on request! Insertion grid Mesh width Load bearing bar Load bearing bar direction 100.5 x 98.5 cm 7 x 3.5 cm 35 x 2.5 mm 100.5 cm 120 x 89.5 cm 7 x 3.5 cm 30 x 2.5 mm 120 cm Cgodpfxodhhuko Afnen 118 x 109 cm 7 x 4.5 cm 45 x 2.5 mm 118 cm 133 x 99 cm 3 x 3 cm 30 x 2 mm 99,5 cm 134 x 75 cm 7 x 7 cm 25 x 3 mm 75 cm 134 x 76.5 cm 2.5 x 2.5 cm 20 x 2 mm 75 cm 134 x 92 cm 6.5 x 6.5 cm 30 x 2 mm 92 cm 134.5 x 99.5 cm 7 x 7 cm 30 x 2 mm 99.5 cm 143.5 x 124 cm 7 x 4.5 cm 35 x 2 mm 124 cm Second-hand, very good condition, see pictures. Goods are in stock. Transportation possible on request. Visits possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices and subject to prior sale! See our AGB, all prices excl. VAT from stock) Purchase / Sale We are constantly looking for and offering numerous articles from various areas clean-swept premises Liquidations Quick

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, overall weight: 21 kg, Auction of a Plymovent KUA-2/H! Cedpsyf Dnhsfx Afnogn MACHINE DETAILS Net weight: 21 kg

Year of construction: 2002, condition: ready for operation (used), functionality: fully functional, overall weight: 171 kg, total length: 1,200 mm, total width: 1,200 mm, total height: 1,300 mm, MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,200 x 1,200 x 1,300 mm Weight: 171 kg Codpfxsyf Ddpo Afnsgn Connected load: 400 V Refrigerant: 95 g / R134a Compressed air supply: 5-8 bar EQUIPMENT Printer: Star DP8340S

Condition: like new (used), Year of construction: 2015, Arburg 320 C 500-170 (2015) Golden edition Working hours : 40.167 h Clamping force: 50 t Screw diameter : 30 mm Clamping force: 500 kN Distance between tie bars: 320 × 320 mm Platen size (H × V): 446 × 446 mm Minimum mould height: 200 mm Maximum daylight opening: 550 mm Ejector stroke: 125 mm Screw diameter: 30 mm Maximum shot volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Screw speed max: 400 r/min Nozzle stroke: 250 mm Nozzle contact pressure: 40.6 kN Heating capacity: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW Machine length: approx. 3.4 m Machine width: approx. 1.4 m Machine height: approx. 2.0 m Machine weight: approx. 2 400 kg 2 pumps machine Machine Equipment / Configuration Control system: Selogica Direct controller Hydraulic system: Dual-pump hydraulic system Injection Unit Thermoplastics injection unit, 30 mm screw, high wear resistant design Standard screw coupling with flat-ended geometry Open nozzle, 30 mm Nozzle tip for open nozzle Heater band for open nozzle Clamping Unit Mounting platen set, central diameter 125 mm Core pull 1, for serial movement, holding pressure via check valve Interfaces & Connectivity Codpfx Afjxqdxijnegn Robot interface EUROMAP 67 (50-pin) Interface for electrical safety interlock on safety door EUROMAP 73

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, total width: 1,120 mm, total length: 1,240 mm, overall weight: 450 kg, load capacity: 150 kg, inner diameter: 220 mm, TECHNICAL DETAILS Load capacity per spool: 150 kg Inner diameter: 220 mm Inner belt width: 200 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,240 x 1,120 x 2,200 mm Cgjdpfx Afsyf Dbuonen Weight: 450 kg EQUIPMENT Wiring diagram

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, total length: 800 mm, total width: 900 mm, total height: 1,600 mm, filling weight (max.): 100,000 g, TECHNICAL DETAILS Workpieces: Press-in studs M6 x 15 Feeding capacity: 15/min (single track) Cgjdpfx Afeyf A U Honsn Max. fill weight: 100 kg Max. fill volume: 25 dm³ MACHINE DETAILS Voltage: 230 V Max. power consumption: 100 VA Dimensions (L x W x H): 800 x 900 x 900 mm EQUIPMENT Linear feeder rail Transport hose Air blow nozzle Note: The workpieces, max. 100 kg or 25 dm³, are stored in the parts feeder and correctly oriented. At the end of the sorting process, the workpieces are buffered on a linear feeder rail and supplied to the singulation unit. Behind the singulation unit, a suitable transport hose and an air blow nozzle are installed. Each workpiece is transported individually through the transport hose. Possible electric interfaces include HAN connectors, bus modules and valve manifolds.

Condition: like new (used), Year of construction: 2014, Arburg 320 C 500-170 (2014) Working hours : 44.124 h Clamping force: 50 t Screw diameter : 25 mm Shot weight : 75 g Clamping force: 500 kN Distance between tie bars: 320 × 320 mm Platen size (H × V): 446 × 446 mm Minimum mould height: 200 mm Maximum daylight opening: 550 mm Ejector stroke: 125 mm Screw diameter: 30 mm Maximum shot volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Screw speed max: 400 r/min Cgsdpfx Afexqdtasnsn Nozzle stroke: 250 mm Nozzle contact pressure: 40.6 kN Heating capacity: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW L 3.4 m x W 1.4 m x H 2.0 m Weight :2 400 kg Injection Unit Thermoplastics injection unit, 25 mm screw, high wear-resistant design Standard screw coupling with flat-ended geometry Open nozzle, 25 mm Nozzle tip for open nozzle Heater band for open nozzle Clamping Unit Mounting platen set, central diameter 125 mm Core pull 1, serial movement, holding pressure via check valve Hydraulic ejector Ejector quick-coupling Connector for ejector platen protection

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, overall weight: 130 kg, total length: 1,200 mm, total width: 780 mm, total height: 1,280 mm, Equipment: foot remote control, TECHNICAL DETAILS Grommet size: 4 mm MACHINE DETAILS Dimensions & Weight Codpfeyf A S Eex Afnsgn Dimensions (L x W x H): 1,200 x 780 x 1,280 mm Net weight: 130 kg EQUIPMENT on castors with foot switch Note: The machine is sold without a riveting head.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, load capacity: 100 kg, High-lift truck with cable reel gripper SG 600 Du-Hy/So! Cedpfoyf A Nqox Afnegn TECHNICAL DETAILS Payload: 100 kg Diameter: 150 mm to 850 mm Tilting forward-backward: 0° to 90° Rotating left-right: +90° to -90° MACHINE DETAILS Battery: 12 V, 70 Ah EQUIPMENT Gripper function Note: The truck is sold without a charger.

Condition: good (used), Year of construction: 1996, Verschkasten-canister BJ ca 1996 1 x Cgsdpfjdqb Ahex Afnen

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, total length: 1,600 mm, total width: 1,360 mm, overall weight: 430 kg, load capacity: 30 kg, pump capacity: 80 l/min, TECHNICAL DETAILS Load capacity: 30 kg Pump capacity: 80 l/min Tank volume: 2 x 150 l MACHINE DETAILS Voltage: 400 V Power consumption: 1.5 kW Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,360 x 1,560 mm Cgsdeyf A I Hepfx Afnjn Weight: 430 kg