Korn-kali fertilizer 38% K2O, 6% MgO, 12% SO3

Fixed price plus VAT

€340

Condition

New

Location

Karczmiska Pierwsze Poland

Korn-kali fertilizer 38% K2O, 6% MgO, 12% SO3

Machine data

Machine type:: Korn-kali fertilizer 38% K2O, 6% MgO, 12% SO3

Condition:: new

Price & Location

Fixed price plus VAT

€340

Location:: Pogodna 79, 24-310 Karczmiska Pierwsze, Polska

Call

Details about the offer

Listing ID:: A22081828

Update:: 09.06.2026

Description

Korn-KALI® 38+6
Potassium chloride with added magnesium salts

MINERAL FERTILIZER K2O (MgO, SO3) 38 (6, 12)
Declaration of nutrient content (m/m)
• 38 % K2O water-soluble potassium oxide (= 31.5 % K)
• 6 % MgO water-soluble magnesium oxide (= 3.6 % Mg)
• 12 % SO3 water-soluble sulfur trioxide (= 4.8 % S)
Dsdpfx Aezb Rlfsl Ujkn
Particle size
Granules. 95 % of the product passes through a sieve with a mesh size of 4.8 mm.
Ingredients
• Potassium chloride (KCl), CAS No. 7447-40-7
• Sodium chloride (NaCl), CAS No. 7647-14-5
• Magnesium sulfate monohydrate (MgSO4 • H2O), CAS No. 14168-73-1
All ingredients are "primary raw materials and mixtures" (CMC 1).
Instructions and dosages: For professional use only!
Crop Yield Amount
• Cereals average yield 200-350 kg/ha
• Cereals high yield 250-450 kg/ha
• Rapeseed average yield 230-600 kg/ha
• Rapeseed high yield 150-700 kg/ha
• Sugar beets average yield 350-1000 kg/ha
• Sugar beets high yield 450-1200 kg/ha
• General recommendations are based on an average level of nutrient availability in the soil.
• Recommended for soil application.
• Suitable for crops that tolerate chlorides.
Recommended storage conditions
• Protect fertilizer stock with a tarpaulin.
• Store in a cool (< 30 °C) and dry place!
Safety and environmental information
• To avoid hazards to human health and the environment, follow the instructions for the recommended use of this fertilizer product. Comply with local legal requirements!

The stated price applies to a quantity of 1000 kg EXW, and transport costs are determined individually.
Minimum purchase quantity: 24,000 kg.

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2025

111 listings online

Call

Send inquiry

Telephone & Fax

+48 663 1... show

These listings may also fit your interest.

Auction

Hessen

7,806 km

Reach truck
StillFM-X14

€5,600

To the auction

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: P21902N92695, Year of construction: 2024, operating hours: 87 h, load capacity: 1,400 kg, lifting height: 7,100 mm, fuel type: electric, power: 6.5 kW (8.84 HP), empty load weight: 2,371 kg, Used reach truck with only 87 operating hours! TECHNICAL DETAILS Load capacity: 1,400 kg Lifting height: 7,100 mm MACHINE DETAILS Fuel type: electric Power: 6.5 kW Battery voltage: 48 V Operating hours: 87 h Dsdpfxjy Uy Aho Al Uskn Unladen weight: 2,371 kg EQUIPMENT Battery Charger

See details

Auction

Horizontal machining center OKUMA MA-600HB

Denmark

7,646 km

Horizontal machining center
OKUMAMA-600HB

€19,000

To the auction

Condition: ready for operation (used), Year of construction: 2005, operating hours: 44,673 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, controller model: OSP-E100M, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 320, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine on schedule in week 30 of 2026! Dksdpfx Aloy S T Rts Uon TECHNICAL DETAILS X-axis travel: 1,000 mm Y-axis travel: 900 mm Z-axis travel: 900 mm Spindle speed: 12,000 rpm Tool holder: BT50 Tool positions: 320 Tool positions for 600 mm tools: 80 Part accuracy: 0.001° MACHINE DETAILS Control system: OSP-E100M Number of axes: 4 Coolant pressure: 30 bar Operating hours NC cycle time: 71,235 h Spindle running time: 56,241 h Machining time: 44,673 h EQUIPMENT ATC with 320 positions 80 positions for 600 mm tools Balluff writing/reading system NC table Absolute scales in X, Y, and Z Renishaw MP10 measuring probe Tool breakage monitoring MOP tool monitoring 30-bar coolant system Mayfran Consep 2000 chip conveyor

See details

Auction

Universal machining center Deckel Maho DMU 80 P Hi-Dyn

Nordrhein-Westfalen

7,686 km

Universal machining center
Deckel MahoDMU 80 P Hi-Dyn

€15,000

To the auction

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain 430, workpiece weight (max.): 800 kg, The machine was recently inspected by a technician, and the following minor repairs were carried out: New cable routing, replacement of the display, and replacement of the sensor cable for the tool changer. TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 700 mm Travel range Z-axis: 600 mm B-axis: Automatic swivel milling head C-axis: NC rotary table (dimensions: 900 x 630 mm) Tool holder: SK40 Number of tool changer positions: 60 Maximum workpiece weight: 800 kg MACHINE DETAILS Control model: Heidenhain 430 EQUIPMENT Dksdpfx Aljy Szq Us Uon Chip conveyor Internal cooling system (40 bar operating pressure) Handwheel Heidenhain TS 642 probe

See details

Auction

Injection molding machine KraussMaffei KM 950-17200 MX

Województwo dolnośląskie

8,237 km

Injection molding machine
KraussMaffeiKM 950-17200 MX

€40,000

To the auction

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, clamping force: 9,500 kN, screw diameter: 120 mm, ejector stroke: 300 mm, opening stroke: 1,900 mm, TECHNICAL DETAILS Clamping force: 9,500 kN Opening force: 665 kN Tie bar distance: 1,400 x 1,150 mm Clamping plates: 1,960 x 1,710 mm Opening stroke: 1,900 mm Min. mould height: 500 mm Max. mould height: 1,200 mm Max. opening width: 2,400 mm Ejector stroke: 300 mm High-performance screw HPS-UN, diameter: 120 mm Nozzle radius: 30 mm Nozzle opening: 12 mm Screw diameter: 120 mm Shot weight (HDPE): 5,420 g Shot volume: 7,634 cm³ Djdpfx Aley T H A Es Uokn Specific injection pressure: 2,257 bar MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 12,770 x 3,420 x 2,750 mm Machine weight: 61.5 t

See details

Auction

Injection molding machine DEMAG System 800/1120-9500

Województwo dolnośląskie

8,235 km

Injection molding machine
DEMAGSystem 800/1120-9500

€39,000

To the auction

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 130 mm, ejector force: 139,000 N, opening stroke: 1,030 mm, plate width: 1,500 mm, plate height: 1,620 mm, TECHNICAL DETAILS Clamping force: 8,000 kN Plate size (h x v): 1,620 x 1,500 mm Clear width between tie bars (h x v): 1,120 x 1,000 mm Dsdpfx Aljy T Hz Ie Ujkn Mold height: 500 - 1,050 mm Maximum plate distance: 2,080 mm Opening stroke: 1,030 mm Ejector stroke: 350 mm Ejector force: 139 kN Mold weight: 7,200 kg Injection system Screw diameter: 130 mm Displacement: 7,300 cm³ Injection weight (PS): 6,640 g Injection pressure: 1,300 bar Screw length: 20 l/d Electrical and hydraulic equipment Rated power of pump motor: 110 kW Heating power: 79 kW Oil tank capacity: 1,300 L MACHINE DETAILS Machine dimensions LxWxH: 12.3 m x 2.7 m x 2.7 m Total weight: 33,500 / 9,700 kg

See details

Auction

Injection molding machine DEMAG System 1500/1500-16000

Województwo dolnośląskie

8,235 km

Injection molding machine
DEMAGSystem 1500/1500-16000

€69,000

To the auction

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8673 0023, clamping force: 15,000 kN, screw diameter: 145 mm, injection pressure: 1,454 bar, plate width: 1,880 mm, plate height: 2,150 mm, Regularly maintained machine - see repair history TECHNICAL DETAILS Clamping force: 15,000 kN Mounting plate dimensions (H x V): 2,150 mm x 1,880 mm Clear distance between columns (H x V): 1,500 mm x 1,250 mm Min./Max. mold height: 700 mm - 1,400 mm Maximum opening distance: 2,900 mm Control: DIAS Injection unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Injection weight: 9,880 g Injection pressure: 1,454 bar Electrical and hydraulic equipment Rated power of pump motor: 165 kW Heating power: 97 kW MACHINE DETAILS Net weight with control cabinet: 21,000 t Dimensions (L x W x H): 14.4 m x 3.4 m x 2.9 m Electrical connection Main connection: 3 × 400 V, 50 Hz Control voltage: 3 × 400 V, 50 Hz Dkjdpfxjy T Hy Ds Al Ujn Repair history 2010: New screw with RSP and tube 2015: New Ibed 2015: New wiring board 2017: Motor and pump 2 new 2017: Injection cylinder BS piston rod new with seals 2017: Circulation pump oil cooler replaced 2017: Teachbox replaced (Rob) 2018: Pumps P 1 + 3 replaced (at 65,800 h) 2018: Hydraulic oil change 2019: New injection valve 2019: Dosing inverter overhauled by Fa. Eichler 2021: Motor P1 new 2022: New RSP EQUIPMENT - Wittmann W 753 Robot - 2008 - Cage and conveyor belt

See details

Auction

Injection molding machine ENGEL DUO 11050/2300

Województwo dolnośląskie

8,237 km

Injection molding machine
ENGELDUO 11050/2300

€59,000

To the auction

Condition: ready for operation (used), Year of construction: 2004, operating hours: 70,029 h, functionality: fully functional, machine/vehicle number: 51561, clamping force: 2,300 kN, screw diameter: 135 mm, injection pressure: 1,600 bar, opening stroke: 3,800 mm, tool height: 1,890 mm, TECHNICAL DETAILS Clamping force: 2,300 kN Dksdey T Hx Hepfx Al Uon Platen size (H x V): 2,900 x 2,500 mm Tie bar distance (H x V): 2,000 x 1,600 mm Minimum/maximum mould height: 700 mm/1,890 mm Maximum opening stroke: 3,800 mm INJECTION UNIT Screw diameter: 135 mm Shot volume: 8,870 cm³ Shot weight (PS): 8,071 g Injection pressure: 1,600 bar MACHINE DETAILS Net weight (with control cabinet): 113 t + 18 t Operating hours: 70,029 h

See details

Auction

Injection molding machine KraussMaffei KM 420-2700 C2

Województwo dolnośląskie

8,237 km

Injection molding machine
KraussMaffeiKM 420-2700 C2

€9,900

To the auction

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 424227, clamping force: 4,200 kN, screw diameter: 80 mm, injection pressure: 1,829 bar, injection weight: 1,304 g, opening stroke: 1,400 mm, TECHNICAL DETAILS Clamping force: 4,200 kN Platen size (H x W): 1,270 x 1,200 mm Dkodpfxjy T Hwis Al Usn Tie bar spacing (H x W): 800 x 800 mm Minimum mold height: 380 mm Maximum mold height: 1,020 mm Max. opening stroke: 1,400 mm Screw diameter: 80 mm Injection volume: 1,433 cm³ Shot weight: 1,304 g (PS) Max. injection pressure: 1,829 bar Max. temperature: 375 °C MACHINE DETAILS Supply voltage: 400 V Phases: 3~ Frequency: 50 Hz Total current consumption: 237 A Fuse rating: 250 A Pump power: 75 kW Heating power: 36 kW Dimensions & Weight Dimensions (L x W x H): 7.06 x 2.33 x 2.51 m Machine weight: approx. 22,000 kg

See details

Auction

Injection molding machine Arburg 720 S 3200-2100

Województwo dolnośląskie

8,237 km

Injection molding machine
Arburg720 S 3200-2100

€9,900

To the auction

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 198346, clamping force: 3,600 kN, screw diameter: 70 mm, injection pressure: 2,000 bar, injection weight: 984 g, opening stroke: 1,400 mm, TECHNICAL DETAILS Clamping force: 3,600 kN Platen size (H x W): 1,040 x 1,040 mm Column spacing (H x W): 720 x 720 mm Minimum mold height: 300 mm Maximum mold height: 300 mm Maximum opening stroke: 1,400 mm Screw diameter: 70 mm Injection volume: 1,078 cm³ Dksdpfxsy T Hrms Al Uen Shot weight: 984 g Injection pressure: 2,000 bar MACHINE DETAILS Electro-hydraulic system Rated power of pump motor: 55 kW Heating capacity: 30.3 kW Net weight with control cabinet: 17 t

See details

Auction

Injection molding machine Wittmann Battenfeld MacroPower 900/ 8800

Województwo śląskie

8,440 km

Injection molding machine
Wittmann BattenfeldMacroPower 900/ 8800

€99,000

To the auction

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 138337-100, clamping force: 9,000 kN, screw diameter: 105 mm, injection pressure: 1,931 bar, ejector stroke: 300 mm, opening stroke: 2,100 mm, TECHNICAL DETAILS Screw diameter: 105 mm Screw stroke: 525 mm Screw L/D ratio: 22 Theoretical shot volume: 4,545 cm³ Injection pressure: 1,931 bar Maximum screw speed: 167 rpm Maximum plasticizing rate: 151 g/s Screw torque: 8,000 Nm Nozzle travel / nozzle thrust force: 950 mm / 129 kN Injection volume flow rate: 725 cm³/s Injection volume flow rate with double pump (option): 906 cm³/s Air injection volume flow rate with tank (option): 1,812 cm³/s Cylinder heating capacity: 53.9 kW Number of heating zones: 7 Clamping force: 9,000 kN Maximum opening stroke: 2,100 mm Min./Max. tool height: 500 – 1,000 mm Platen size: 1,720 x 1,550 mm Tie bar spacing: 1,200 x 1,000 mm Ejector stroke: 300 mm Ejector force: 165 kN Tool opening force: 300 kN MACHINE DETAILS Pump output: 90 kW Djdpfx Aoy T Hprjl Uekn Heating capacity: 53.9 kW Oil tank volume: 1,100 l Dimensions & Weight Machine dimensions (L x W x H): 10,100 x 3,400 x 2,700 mm Weight: 35,200 kg

See details

Advertise here