Sell machines Sell
Watch list (0) Login
Menu
  2. Other machinery
  3. Listing ID: A2421820
Home Page Other machinery Listing ID: A2421820

Diesel Tank Tank conditioning filling station

Year of construction
2011
Condition
Ex-display machine
Location
Germany Germany
Diesel Tank Tank conditioning filling station
Diesel Tank Tank conditioning filling station
more Images

Basic data

Machine type:
Diesel Tank Tank conditioning filling station
Machine number:
10.000 Ltr
Year of construction:
2011
Condition:
as good as new (ex-display)

Price & Location

Location:
D - Nordrhein-Westfalen Germany
Call

Details about the offer

Listing ID:
A2421820
Update:
19.05.2026

Description

Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Resources Act

Dear Sir or Madam,

We offer a 10,000-liter double-walled storage tank for diesel storage with the following specifications:

Nominal capacity: 10 cbm
Quantity: 1
Used, but fully refurbished, meaning the container has been cleaned, reconditioned, primed, and painted.
Color: Paint RAL... as per your request.
Material: Steel in steel, material S235JRG2
Documents: Manufacturer's certificate/test certificate according to DIN 6616 D/2 and nameplate.

Shape: Cylindrical, lying horizontally on 2 welded saddle supports (ground clearance approx. 100 mm).

Monitoring space of the double wall with leak detection fluid.

Container dimensions:
Length: approx. 5,350 mm plus 600 mm for diesel pump
Diameter: approx. 1,600 mm
Weight: approx. 2,000 kg

Equipment/fittings: Manway 500 mm with manway cover, screws, and gasket.
- Filling pipe 2“ with TW valve (filling cap) (from 20 m³ = 3“)
- Suction pipe 1¼“
- Dipstick and dipstick closure – tank level indicator
- Vent pipe with cap 1 ½“
- Limit value sensor with type approval
- Leak detection device (optical) = LAS with leak detection fluid
- Access ladder for side mounting, supplied separately.
Ijdpfx Ajcl Sb Rsp Doih

Tank approved for installation outside of earthquake/flood zones.

Diesel fuel dispenser with data recording
Type: HDM80eco LTE
Flow rate: 75 l/min
Cloud-based basic module free of charge
You can see who, when, where, and how much fuel was dispensed.
Fueling is done via tank key or PIN input.

Dispensing area/fueling station
Type: KAP system, galvanized
Area with ramps (mm): approx. 2,650 x 5,300
Area without ramps (mm): approx. 2,500 x 5,000
Pan height (mm): approx. 60
- Nationwide general building approval
- Approved for installation outdoors and in buildings
(For outdoor installation with folding cover and passing pipes)
- 2 collection basins, each with a volume of 150 liters.

=====

Top offer: Liquid fertilizer - AHL tank systems in sizes from 10,000 to 100,000 liters.

Of course, you can also participate in the design of your tank system!

All our systems are thoroughly inspected and checked by selected employees at our company.
We also offer affordable delivery upon request.
You can inspect our systems at any time.
Further tank systems for above-ground as well as underground storage are available in all sizes and are for sale on our premises.
Have we convinced you of our offer?
If you have any questions or requests, please call us, one of our experienced employees will be happy to advise you.

Price/Shipping

The price for the fuel station applies ex works Warstein, unloaded.
Delivery can be offered at a low cost for an additional charge.
Delivery time: upon agreement.
You will receive an invoice with VAT shown.

In addition, we purchase existing tank systems and can, as a certified specialist company according to the Water Resources Act (WHG), professionally empty, clean, dismantle, and remove them.

Sincerely,
from Warstein
Tank & Environmental Protection Wozniack

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2015

35 listings online

Call

Send inquiry

Countryus 
Germany
Austria
Switzerland
United States
United Kingdom
France
Belgium
Spain
Mexico
Italy
Netherlands
Poland
Russian Federation
Belarus
Ukraine
Estonia
Turkey
New Zealand
Ireland
Czech Republic
Denmark
Finland
Sweden
Norway
Luxembourg
Greece
Lithuania
Latvia
Iceland
Portugal
Brazil
Venezuela
Argentina
Hungary
Slovakia
Romania
Moldova
Slovenia
Serbia
Montenegro
Albania
Croatia
Bulgaria
Macedonia
Bosnia and Herzegovina
Israel
Egypt
Morocco
India
Indonesia
South Korea
Japan
Thailand
Malaysia
Vietnam
China (People's Republic of China)
Taiwan
Iran
Bangladesh
Note: Your inquiry will be forwarded to all sellers in this machine category. This allows you to receive a large number of offers.
The inquiry could not be sent. Please try again later.
Privacy statement

Telephone & Fax

+49 2902 ... show
Fax:
These listings may also fit your interest.
Auction
Vertical machining center HWACHEON SIRIUS U
Vertical machining center HWACHEON SIRIUS U
Vertical machining center HWACHEON SIRIUS U
Vertical machining center HWACHEON SIRIUS U
Vertical machining center HWACHEON SIRIUS U
Vertical machining center HWACHEON SIRIUS U
Vertical machining center HWACHEON SIRIUS U
Ends in 
d  h  min  s  Auction ended
Italy Veneto
8,335 km
Vertical machining center
HWACHEONSIRIUS U
buyer-protection
€6,800
To the auction
Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: Fanuc Series 18-M, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 500 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 500 mm Rapid traverse rate, X-axis: 30,000 mm/min Rapid traverse rate, Y-axis: 30,000 mm/min Rapid traverse rate, Z-axis: 30,000 mm/min Table length: 650 mm Table width: 500 mm Spindle speed: 10,000 rpm Speed ranges: 2 Spindle interface: ISO 40 Tool positions: 30 Tool selection: Random MACHINE DETAILS Control system: Fanuc Series 18-M Coolant pressure: 20 bar Ijdpfxjz Ir Iwe Ap Doih Dimensions & Weight Dimensions (L x W x H): 3,140 x 2,090 x 2,900 mm Weight: 7,000 kg
See details
Listing
Cement Bag Filling System Rotopacker Zipper 50/400
Cement Bag Filling System Rotopacker Zipper 50/400
Cement Bag Filling System Rotopacker Zipper 50/400
Cement Bag Filling System Rotopacker Zipper 50/400
Cement Bag Filling System Rotopacker Zipper 50/400
more images
Germany Germany
7,870 km
Cement Bag Filling System
RotopackerZipper 50/400
Call
Condition: ready for operation (used), Year of construction: 1993, An automatic valve bag filling system for cement bags Rotopacker is available. Packaging capacity: 2400 bags/h, number of filling stations: 8, filling station type: spouts, cylinder: Festo pneumatic cylinder, cylinder stroke: 150mm. Documentation available. On-site inspection is possible. Iijdpjuml S Nefx Ap Doh
See details
Auction
Vertical machining center HEDELIUS CB 70
Vertical machining center HEDELIUS CB 70
Vertical machining center HEDELIUS CB 70
Vertical machining center HEDELIUS CB 70
Vertical machining center HEDELIUS CB 70
Vertical machining center HEDELIUS CB 70
Vertical machining center HEDELIUS CB 70
Vertical machining center HEDELIUS CB 70
Vertical machining center HEDELIUS CB 70
Vertical machining center HEDELIUS CB 70
Vertical machining center HEDELIUS CB 70
Vertical machining center HEDELIUS CB 70
Vertical machining center HEDELIUS CB 70
Ends in 
d  h  min  s  Auction ended
Italy Veneto
8,335 km
Vertical machining center
HEDELIUSCB 70
buyer-protection
€4,800
To the auction
Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 2,100 mm, travel distance Y-axis: 720 mm, travel distance Z-axis: 600 mm, controller manufacturer: Siemens, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 2,100 mm Travel range, Y-axis: 720 mm Travel range, Z-axis: 600 mm Table size: 2,800 × 650 mm Iedpfx Apoz Irphj Deih Rapid traverse rate, X-axis: 30 m/min Rapid traverse rate, Y-axis: 30 m/min Rapid traverse rate, Z-axis: 30 m/min Spindle speed: 8,000 rpm Tool holder: ISO 40 Tool capacity: 30 MACHINE DETAILS Control system: Siemens Coolant pressure: 25 bar EQUIPMENT High-pressure coolant system through the spindle and at the flange side Additional coolant tank Chip conveyor with scraper belt
See details
Auction
Vertical machining center FAMUP - Emco MCP 100 Evolution
Vertical machining center FAMUP - Emco MCP 100 Evolution
Vertical machining center FAMUP - Emco MCP 100 Evolution
Vertical machining center FAMUP - Emco MCP 100 Evolution
Ends in 
d  h  min  s  Auction ended
Germany Nordrhein-Westfalen
7,679 km
Vertical machining center
FAMUP - EmcoMCP 100 Evolution
buyer-protection
€6,000
To the auction
Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 640 mm, controller model: SIEMENS 840 D, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,100 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 640 mm Number of pallets: 2 Table size: 2 × 1,000 × 450 mm Table load capacity: 600 kg Spindle speed range: 50–10,000 rpm Drive power: 18.5 kW Tool interface: DIN 69871 / ISO 40 Feed rate range X/Y/Z: up to 10,000 mm/min Rapid traverse rate in all axes: 30 m/min MACHINE DETAILS CNC path control: SIEMENS 840 D Number of tool positions: 30 Machine dimensions & weight Machine dimensions L × W × H: approx. 3,605 × 3,041 × 3,220 mm Machine weight: approx. 6,700 kg EQUIPMENT 2-position pallet changer 30-position tool changer Internal coolant supply (ICS) Full enclosure with electrically interlocked safety doors Linear guides with double roller recirculating bearing for even absorption of high torques in all directions Ball screws in all 3 axes Machine bed made of Meehanite cast iron for high precision, rigidity, and vibration damping Swivel chip conveyor with integrated coolant system Iijdez Ibb Tjpfx Ap Dsh Preparation for 4th axis CE compliant
See details
Listing
Sawn wood chipper LINDNER T 400/140-2
Sawn wood chipper LINDNER T 400/140-2
Sawn wood chipper LINDNER T 400/140-2
Sawn wood chipper LINDNER T 400/140-2
Sawn wood chipper LINDNER T 400/140-2
Sawn wood chipper LINDNER T 400/140-2
Sawn wood chipper LINDNER T 400/140-2
Sawn wood chipper LINDNER T 400/140-2
Sawn wood chipper LINDNER T 400/140-2
Sawn wood chipper LINDNER T 400/140-2
Sawn wood chipper LINDNER T 400/140-2
more images
Poland Miechucino
8,056 km
Sawn wood chipper
LINDNERT 400/140-2
Certified Dealer
€13,550
Fixed price plus VAT
Call
Condition: ready for operation (used), functionality: fully functional, LINDNER wood chipper for sawmill offcuts, model T 400/140-2 – after technical inspection – in very good condition – suitable for producing technological wood chips TECHNICAL SPECIFICATIONS: infeed width: 400 mm infeed height: 140 mm rotor diameter: 450 mm rotor length: 400 mm main motor power: 33 kW infeed motors power: 2 x 1.5 kW number of knives: 2 pieces screen dimensions: 60 mm x 90 mm infeed rollers in very good condition feeder motor power: 1.5 kW Iijdpfor Ak Rgsx Ap Dsh feeder length: 4,200 mm transport dimensions (L/W/H): 430 / 240 / 150 cm weight: approx. 2,000 kg
See details
Auction
Laser cutting machine MICROSTEP/Virs MSF 3001.15L
Laser cutting machine MICROSTEP/Virs MSF 3001.15L
Laser cutting machine MICROSTEP/Virs MSF 3001.15L
Laser cutting machine MICROSTEP/Virs MSF 3001.15L
Laser cutting machine MICROSTEP/Virs MSF 3001.15L
Laser cutting machine MICROSTEP/Virs MSF 3001.15L
Laser cutting machine MICROSTEP/Virs MSF 3001.15L
Ends in 
d  h  min  s  Auction ended
Slovenia Ruše
8,478 km
Laser cutting machine
MICROSTEP/VirsMSF 3001.15L
buyer-protection
€9,000
To the auction
Condition: repair required (used), functionality: limited functionality, Year of construction: 2017, machine/vehicle number: 2219, laser type: fiber laser, working length: 3,000 mm, working width: 1,500 mm, travel distance Z-axis: 120 mm, No minimum price – guaranteed sale to the highest bidder! Iiodpfx Ajz N Dutjp Djh The machine will be dismantled at the end of week 42. TECHNICAL DETAILS Laser type: Fiber laser Laser source manufacturer: IPG Laser source model: YLS-4000-CUT Laser source power: 4 kW Currently available cutting power: 2 kW Working area: 3,000 × 1,500 mm Z-axis travel: 120 mm Number of pallets: 2 MACHINE DETAILS Control system type: CNC control Level of automation: Automatic Type of operation: Electric Machine dimensions: approx. 4,000 × 8,000 mm EQUIPMENT 2-pallet changing table Note: Modules 1, 4, and 5 automatically lock after cutting and must be unlocked by IPG. The currently available cutting power is 2 kW.
See details
Auction
CNC lathe INDEX C 65
CNC lathe INDEX C 65
CNC lathe INDEX C 65
CNC lathe INDEX C 65
CNC lathe INDEX C 65
CNC lathe INDEX C 65
Ends in 
d  h  min  s  Auction ended
Germany Mecklenburg-Vorpommern
7,868 km
CNC lathe
INDEXC 65
buyer-protection
€14,000
To the auction
Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, spindle speed (max.): 6,000 rpm, bar passage: 65 mm, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Tool turret Number of turrets: 3 Tool holder: VDI 25 W-gear Iisdpfx Apoz Ibf Ee Djh Main and counter spindle Main and counter spindle speed: up to 6,000 rpm Bar diameter: 65 mm MACHINE DETAILS Coolant tank: 600 l Coolant pressure: 8 / 18 bar EQUIPMENT Gantry removal device Hainbuch HS Axzug / GS Axfix Chip conveyor Coolant tank with strainer basket Coolant pump Coolant cooling unit FMB Turbo 10-65, 3-meter bar feeder
See details
Listing
Ilapak VT4000 Vertical Packaging Machine Ilapak Vegatronic 4000
Ilapak VT4000 Vertical Packaging Machine Ilapak Vegatronic 4000
Ilapak VT4000 Vertical Packaging Machine Ilapak Vegatronic 4000
Ilapak VT4000 Vertical Packaging Machine Ilapak Vegatronic 4000
Ilapak VT4000 Vertical Packaging Machine Ilapak Vegatronic 4000
Ilapak VT4000 Vertical Packaging Machine Ilapak Vegatronic 4000
Ilapak VT4000 Vertical Packaging Machine Ilapak Vegatronic 4000
Ilapak VT4000 Vertical Packaging Machine Ilapak Vegatronic 4000
Ilapak VT4000 Vertical Packaging Machine Ilapak Vegatronic 4000
Ilapak VT4000 Vertical Packaging Machine Ilapak Vegatronic 4000
Ilapak VT4000 Vertical Packaging Machine Ilapak Vegatronic 4000
Ilapak VT4000 Vertical Packaging Machine Ilapak Vegatronic 4000
Ilapak VT4000 Vertical Packaging Machine Ilapak Vegatronic 4000
Ilapak VT4000 Vertical Packaging Machine Ilapak Vegatronic 4000
Ilapak VT4000 Vertical Packaging Machine Ilapak Vegatronic 4000
Ilapak VT4000 Vertical Packaging Machine Ilapak Vegatronic 4000
Ilapak VT4000 Vertical Packaging Machine Ilapak Vegatronic 4000
Ilapak VT4000 Vertical Packaging Machine Ilapak Vegatronic 4000
Ilapak VT4000 Vertical Packaging Machine Ilapak Vegatronic 4000
Ilapak VT4000 Vertical Packaging Machine Ilapak Vegatronic 4000
more images
Poland Jadamwola
8,534 km
Ilapak VT4000 Vertical Packaging Machine
IlapakVegatronic 4000
Call
Condition: like new (used), functionality: fully functional, cutting length (max.): 600 mm, cutting width (max.): 410 mm, The machine is in very good condition – like new. Iiodpfoy Tqybjx Ap Dsh Equipped with a vertical heating element and sealing jaws for packaging in PE (polyethylene) film – a complete set of jaws for laminates is available. Forming tube for packages with a width of 350 mm – other sizes are available. Technical data for ILAPAK Vegatronic 4000 VFFS: ▪️ Output: up to 140 packages/min ▪️ Machine type: Continuous Film Motion ▪️ Type: VFFS – Vertical Form Fill Seal Bag size: ▪️ Minimum width: 70 mm ▪️ Maximum width: 410 mm ▪️ Maximum length: 600 mm Supported films: ▪️ Heat-sealable films ▪️ Polypropylene (PP) ▪️ Laminates ▪️ PE (polyethylene) film Film roll: ▪️ Maximum roll width: 880 mm ▪️ Maximum outer diameter: 550 mm ▪️ Core diameter: 76 mm ▪️ Maximum roll weight: 100 kg Power supply: ▪️ 400 V ±5% ▪️ 3 phases + neutral ▪️ 50 Hz ▪️ 7.5 kW Compressed air: ▪️ 7 bar ▪️ 350–900 Nl/min Control: ▪️ Industrial PC ▪️ 8.4” touch panel ▪️ Memory for up to 100 programs Construction: ▪️ Stainless steel ▪️ Hygienic Open Frame design ▪️ Quick bag size changeover ▪️ Film centering ▪️ Servo drives Machine dimensions: ▪️ 1478 × 2336 × 1550 mm Weight: ▪️ Approx. 1500 kg
See details
Auction
High level order picker Jungheinreich EJC 112
High level order picker Jungheinreich EJC 112
High level order picker Jungheinreich EJC 112
High level order picker Jungheinreich EJC 112
High level order picker Jungheinreich EJC 112
High level order picker Jungheinreich EJC 112
High level order picker Jungheinreich EJC 112
High level order picker Jungheinreich EJC 112
High level order picker Jungheinreich EJC 112
High level order picker Jungheinreich EJC 112
High level order picker Jungheinreich EJC 112
High level order picker Jungheinreich EJC 112
High level order picker Jungheinreich EJC 112
Ends in 
d  h  min  s  Auction ended
Netherlands Netherlands
7,514 km
High level order picker
JungheinreichEJC 112
buyer-protection
€1,950
To the auction
Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 90439563, Year of construction: 2013, operating hours: 4,543 h, load capacity: 1,200 kg, lifting height: 2,600 mm, mast type: duplex, fork length: 1,150 mm, TECHNICAL DETAILS General Information Year of manufacture: 2013 Type: Pedestrian stacker Serial number: 90439563 Operating hours: 4,543 h Unladen weight: 834 kg CE marking: Yes Lifting Data Lifting capacity: 1,200 kg Lifting force: 1,200 kg Lifting height: 2,600 mm Free lift: 0 mm Mast: Duplex Iijdez N Di Repfx Ap Doh Dimensions Overhead height: 1,700 mm Fork length: 1,150 mm Fork width: 560 mm Drive and Battery Drive: electric Battery voltage: 24 V Transport Data Transport dimensions: 1,850 × 800 × 1,700 mm Transport weight: 834 kg Transport packages: 1 unit EQUIPMENT Duplex mast Electric drive CE marking present
See details
Auction
Laser cutting machine TRUMPF TruLaser 5040 Fiber
Laser cutting machine TRUMPF TruLaser 5040 Fiber
Laser cutting machine TRUMPF TruLaser 5040 Fiber
Laser cutting machine TRUMPF TruLaser 5040 Fiber
Laser cutting machine TRUMPF TruLaser 5040 Fiber
Laser cutting machine TRUMPF TruLaser 5040 Fiber
Laser cutting machine TRUMPF TruLaser 5040 Fiber
Laser cutting machine TRUMPF TruLaser 5040 Fiber
Laser cutting machine TRUMPF TruLaser 5040 Fiber
Laser cutting machine TRUMPF TruLaser 5040 Fiber
Laser cutting machine TRUMPF TruLaser 5040 Fiber
Laser cutting machine TRUMPF TruLaser 5040 Fiber
Laser cutting machine TRUMPF TruLaser 5040 Fiber
Laser cutting machine TRUMPF TruLaser 5040 Fiber
Laser cutting machine TRUMPF TruLaser 5040 Fiber
Laser cutting machine TRUMPF TruLaser 5040 Fiber
Laser cutting machine TRUMPF TruLaser 5040 Fiber
Laser cutting machine TRUMPF TruLaser 5040 Fiber
Laser cutting machine TRUMPF TruLaser 5040 Fiber
Laser cutting machine TRUMPF TruLaser 5040 Fiber
Laser cutting machine TRUMPF TruLaser 5040 Fiber
Laser cutting machine TRUMPF TruLaser 5040 Fiber
Laser cutting machine TRUMPF TruLaser 5040 Fiber
Laser cutting machine TRUMPF TruLaser 5040 Fiber
Laser cutting machine TRUMPF TruLaser 5040 Fiber
Laser cutting machine TRUMPF TruLaser 5040 Fiber
Laser cutting machine TRUMPF TruLaser 5040 Fiber
Laser cutting machine TRUMPF TruLaser 5040 Fiber
Ends in 
d  h  min  s  Auction ended
Germany Germany
7,609 km
Laser cutting machine
TRUMPFTruLaser 5040 Fiber
buyer-protection
€25,000
To the auction
Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 28,000 h, controller model: Siemens Sinumerik 840 D SL, laser power: 5,000 W, sheet thickness steel (max.): 25 mm, working length: 4,000 mm, working width: 2,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Resonator power: 5 kW Working area (L × W): 4,000 × 2,000 mm Sheet metal thickness, steel: max. 25 mm Sheet metal thickness, stainless steel: max. 20 mm Sheet metal thickness, aluminum: max. 20 mm Speed: max. 235 m/min Accuracy: 0.001 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D SL Dimensions & Weight Dimensions (L x W x H): 12,000 x 5,300 x 2,200 mm Machine weight: 13,000 kg Operating hours: 28,000 h Iodpfx Apez Npdgs Deih EQUIPMENT LiftMaster Power supply for TruDisk via the machine Work area lighting Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning TRUMPF laser Solid-state laser TruDisk 5001 with one LLK outlet Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Laser logbook function Cutting head Universal cutting unit with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet metal edge detection 17-inch touch color display Simple workshop programming Advanced workshop programming Fast reproduction Integrated technology data Automatic shutdown FastLine FlyLine AdjustLine Remote service via internet USB interface RJ-45 network connection CE marking Light barriers Multi-camera base system Compact dust extraction system Machine enclosure with certified viewing window, door on the right Electric roll-up roof Retrofitting capability for max. 2 additional LLK outlets
See details
Listing
Chiron FZ18W Chiron FZ18W
Chiron FZ18W Chiron FZ18W
Chiron FZ18W Chiron FZ18W
Chiron FZ18W Chiron FZ18W
more images
Italy Gussago
8,221 km
Chiron FZ18W
ChironFZ18W
Certified Dealer
Call
Condition: used, Chiron FZ18W Magnum rotopallet 1999 CNC Siemens 840D X 630 Y 400 Z 425 tables (2) 850x450mm 20 tools ISO 40 / 18kW / 140 Nm Iiodpfx Apehkkwbj Djh 40m/min HAWE hydraulics automatic doors swarf conveyor 6 ton 3,6 x 2,25 x 2,85 machine can be inspected under power in our warehouse Mimu Machine Tools (Italy)
See details
Auction
Laser punching machine TRUMPF TC 7000-1300 TC 7000-1300
Laser punching machine TRUMPF TC 7000-1300 TC 7000-1300
Laser punching machine TRUMPF TC 7000-1300 TC 7000-1300
Laser punching machine TRUMPF TC 7000-1300 TC 7000-1300
Laser punching machine TRUMPF TC 7000-1300 TC 7000-1300
Laser punching machine TRUMPF TC 7000-1300 TC 7000-1300
Laser punching machine TRUMPF TC 7000-1300 TC 7000-1300
Laser punching machine TRUMPF TC 7000-1300 TC 7000-1300
Laser punching machine TRUMPF TC 7000-1300 TC 7000-1300
Laser punching machine TRUMPF TC 7000-1300 TC 7000-1300
Laser punching machine TRUMPF TC 7000-1300 TC 7000-1300
Laser punching machine TRUMPF TC 7000-1300 TC 7000-1300
Laser punching machine TRUMPF TC 7000-1300 TC 7000-1300
Laser punching machine TRUMPF TC 7000-1300 TC 7000-1300
Laser punching machine TRUMPF TC 7000-1300 TC 7000-1300
Laser punching machine TRUMPF TC 7000-1300 TC 7000-1300
Laser punching machine TRUMPF TC 7000-1300 TC 7000-1300
Laser punching machine TRUMPF TC 7000-1300 TC 7000-1300
Ends in 
d  h  min  s  Auction ended
Germany Berlin
7,944 km
Laser punching machine
TRUMPF TC 7000-1300TC 7000-1300
buyer-protection
€75,000
To the auction
Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 38,149 h, controller model: Bosch MTX compact, laser power: 4,000 W, punching force: 22 t, sheet thickness (max.): 8 mm, Includes SheetMaster & GripMaster! TECHNICAL DETAILS Laser power: approx. 4,000 W Punching force: max. 220 kN Sheet thickness: max. approx. 8 mm Working area, laser operation (X × Y): approx. 2,540 × 1,280 mm Working area, punching operation (X × Y): approx. 2,540 × 1,370 mm MACHINE DETAILS Control system: Bosch MTX compact Dimensions & Weight Footprint (L × W): approx. 7,950 × 6,700 mm Machine weight: approx. 23,000 kg Iedjz Nn H Hjpfx Ap Djih Total connected load: 87 kVA Operating hours: 38,797 h Beam on-time: 38,149 h EQUIPMENT Active dies SheetMaster GripMaster
See details
Auction
Double miter saw Omga V 235
Double miter saw Omga V 235
Double miter saw Omga V 235
Double miter saw Omga V 235
Double miter saw Omga V 235
Double miter saw Omga V 235
Double miter saw Omga V 235
Double miter saw Omga V 235
Double miter saw Omga V 235
Double miter saw Omga V 235
Double miter saw Omga V 235
Double miter saw Omga V 235
Ends in 
d  h  min  s  Auction ended
Netherlands Netherlands
7,514 km
Double miter saw
OmgaV 235
buyer-protection
€4,585
To the auction
Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 6.719, functionality: fully functional, cutting height (max.): 90 mm, saw blade diameter: 350 mm, overall weight: 500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting depth: 120 mm Max. cutting height: 90 mm Max. saw blade diameter: 350 mm Saw blade bore diameter: 30 mm MACHINE DETAILS Voltage: 400 V Current consumption: 7.13 Fuse rating: 16 A Main motor power: 3.1 kW Dimensions & Weight Dimensions (L x W x H): 1,500 x 900 x 1,700 mm Weight: 500 kg Iiodoz Ni S Repfx Ap Doh Shipping packages: 1 piece
See details
Listing
Bagging system / Palletizer Möllers Packaging Technology GmbH / GREI
Bagging system / Palletizer Möllers Packaging Technology GmbH / GREI
Bagging system / Palletizer Möllers Packaging Technology GmbH / GREI
Bagging system / Palletizer Möllers Packaging Technology GmbH / GREI
Bagging system / Palletizer Möllers Packaging Technology GmbH / GREI
Bagging system / Palletizer Möllers Packaging Technology GmbH / GREI
Bagging system / Palletizer Möllers Packaging Technology GmbH / GREI
Bagging system / Palletizer Möllers Packaging Technology GmbH / GREI
Bagging system / Palletizer Möllers Packaging Technology GmbH / GREI
Bagging system / Palletizer Möllers Packaging Technology GmbH / GREI
Bagging system / Palletizer Möllers Packaging Technology GmbH / GREI
Bagging system / Palletizer Möllers Packaging Technology GmbH / GREI
Bagging system / Palletizer Möllers Packaging Technology GmbH / GREI
Bagging system / Palletizer Möllers Packaging Technology GmbH / GREI
Bagging system / Palletizer Möllers Packaging Technology GmbH / GREI
Bagging system / Palletizer Möllers Packaging Technology GmbH / GREI
more images
Switzerland Niederwil
7,987 km
Bagging system / Palletizer
Möllers Packaging Technology GmbH / GREI
€25,000
Fixed price plus VAT
Call
Condition: used, functionality: fully functional, Fully automatic bagging system – completely dismantled and ready for collection For sale is a fully automatic bagging system, suitable for a wide range of bulk materials such as flour, pellets, and granulates. The system impresses with its high degree of automation and robust industrial design. Features and components: - Pneumatic bagging unit - Fully automatic sewing machine for sealing the bags - Rollers for flattening filled bags Ijdpfx Aoyw Rffjp Djih - Roller conveyors for in-plant transport - Robotic arm for automatic palletizing of the bags - Automatic pallet magazine - All electrical cables and control cabinets have been professionally dismantled The entire system has already been dismantled, neatly stored on pallets, and is ready for immediate collection. Comprehensive electrical documentation with schematics is available. Special features: Ideal for industrial applications with high throughput and automated processes. All components are perfectly coordinated, ensuring an efficient packaging and palletizing process. If interested or for further information, we are happy to assist you.
See details
Auction
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Panel saw Holzma HPL 400/43/16
Ends in 
d  h  min  s  Auction ended
Netherlands Netherlands
7,514 km
Panel saw
HolzmaHPL 400/43/16
buyer-protection
€16,055
To the auction
Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, operating hours: 3,625 h, cutting width (max.): 4,300 mm, overall weight: 7,200 kg, cutting length (max.): 1,600 mm, No minimum price – guaranteed sale to the highest bidder! Iisdpfx Aez Ni S Dsp Djh TECHNICAL DETAILS Max. cutting length: 1,600 mm Max. cutting width: 4,300 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 13,600 x 2,450 x 2,450 mm Weight: 7,200 kg Transport packages: 8 pcs. Operating hours: 3,625 h
See details
Preview Trust Seal

Machineseeker Trust Seal

What is the trust seal?

Machineseeker certifies selected sellers with the Machineseeker trust seal. Before approval, a standardized and comprehensive check is carried out by experienced Machineseeker staff.

  • What do we verify?

    Trade licence>

    Check of
    trade licence or commercial register extract

    Postal address>

    Verification of the dealer's
    postal address

    Bank Account>

    Validation of the
    banking details

    Availability>

    Verification of
    accessibility     to
    main phone number

    Credit report>

    Credit report
    may not contain negative criteria

    Customer complaints>

    Buyer complaints
    can lead to withdrawal of the seal

  • What does this mean for you as buyer?

    The Machineseeker trust seal enables you, as a buyer, to identify trustworthy sellers who are very likely to do honest and righteous business, without having to do your own investigation.

    Disagreements may of course still arise during the purchasing process. Machineseeker is not liable for any legal violations by buyers or sellers active on Machineseeker.