11
Fabrivision II Laserscanner.
Scans sheet metal, plastic, chardboard, ect. up to 12 mm thickness.
Reduces construction time radicaly.!
Make copies from sheet metal parts, your costumors chardboard template, that they want to make you cut in metal/wood/plastic ect. in your cnc cutter.
Scans plates/subjects up to approximately 1100 x 1100 mm.
For example, a sheet metal plate, 400x500 mm with 20-30 holes, is scanned in less than a minute. Now you can transfer to a dxf file, and be ready to cut i...
15
Semax, Swedish made forklift with rear mounted tower, for totaly free vision. Additional to that, the tower has a telescopic boom, that extends up to 900 mm. So you can load/unload a truck or similar from one side only.
Very nice cabin with heater/fan. Radio. Finger-sticks for lifting, kipping, telescope, fork positioner and sidechange.
Small kipper contact for forward/reverse on same konsole as the other sticks.
Lifting cap.:
600 mm.: 7.000 kg
900 mm extended, 600 mm.: 4.100 kg.
Fork pos...
15
Really nice electric forklift in exceptionally fine condition.
Closed cabin. Seat can be turned approx. 45 degrees and there are extra pedals, so you can sit with the side to if you drive a lot backwards.
Lifting height: 350 cm.
Construction height: 292 cm.
B98llb9g7u
Mast: Dublex.
Year: 2009
Hours: 2003
Forkpossitioners and side shift.
Fork length: 160 cm
Condition: Perfect.! Note the unusually low number of hours.!
80V battery.
Incl charger, 400 volts.
Transport can be arranged.
15
Really nice electric forklift in really nice condition.
Qhx7t
Open cabin. Cushion wheels.
Lifting height: 400 cm.
Construction height: 292 cm.
Mast: Dublex free.
Year: 2016
Key on hours: 15.247
But only 4791 km.! This means the forklift has been turned on for a long time without being used.
Fork possisioner and side shift.
Fork length: 120 cm
Condition: Really nice. !!
80V battery.
Battery will replaced with new before sale.
Incl charger, 400 V.
Transport can be arranged.
10
Has been used for welding round seams on PTO shafts. Can be used for many other round items.
Adjustable speed on motor.
Can run automatically with signal to welder. Can run 1 lap or continuously.
Max workpiece length 1600 mm.
Icmibac2u
Can be extended very easily.
Transport can be arranged.
I also have a C-press with lots of different dies for aligning many types of shafts, solid and tubes.
I also have welders in different sizes and types.
8
Large spotwelder with watercooling tank, pump ect.
Hmrftxr
Transport can be arranged.
15
Very nice Dantruck with low amount of working hours, and lots of accessories.
Manuf. year: 2011, sold 2012
Working hours: 5156
Particulate filter.
Integrated fire extinguishing system.
Bluepoint (Blue reverse-light, for warning pedestrians and other traffic)
Luxury cabin with.:
Aircon.
Radio.
Panoramaview roof with viper.
Muliple steering:
-Normal steering wheel + F-R on lever under steering wheel.
-Normal steering wheel + F-R on pedal.
8q7seawa
-Mini-steering wheel + F-R on joystick on left ar...
15
3 - axis CNC Vertical Machining Center
Cincinnati 1250 Arrow 2
Year: 2001.
Spindle speed: 50-10000 rpm.
Bed size is 1250 x 710 mm.
2 swarf conveyors.
NB: No original documents are included with the machine.
Gxtblo
More specifications may be found in the attached PDF Operating Manual Cincinnati 1250 Arrow 2 – page 2-11 to 2-14.
Remote control
21 station automatic tool changer. No tools are included.
Spindle taper: CAT 40
Max. spindle speed, rpm: 6000
Control: Siemens Acramatic 2100
X travel mm 12...
15
Mazak Vertical Machining Centre Nexus 410 A
VCN-410A
Serial No.: 165403
Weight: 5010 kg
New in 2003.
Very well-maintained 3 axis vertical CNC machining centre.
No oil leaks.
Not under power.
The machine is supplied without original documents. The following technical details may vary from the actual machine specifications. For this reason the specifications and condition of the machine is without warranty and the machine is sold as is and where is Incoterms EXW.
Number of Spindles: 1
Travel:
X: 5...
15
Abene VHF-3. Swedish quality.!
Table: 1200 x 260 mm
Movement:
X: 750 mm
Y: 200 mm
Z: 500 mm
B0m22rj7uo
Milling machine in really good condition.!
1 owner machine. Have been to a workshop in a small airport.
This machine is very stable. When using the machine as a horizontal milling machine, it is the whole head which is driven back and down, after which it is locked.
Can be delivered all over Europe in a Eurotrailer.
I can send more pictures and possibly. video via Whatsapp.
15
DCB Half gantry crane consisting of:
2 pcs 16 ton hoists.
2 support legs.
The following accessories are included:
1 remote control with charger.
2 pcs weight display.
Max hoist height: 14 meters.
Lifting speed: 0.11-5.6.
Classification: M5.
Range: 21,972.
Dimension crane guide rail: 80x60.
Functional.
In operation until week 12 2021.
Dismantled week 12 2021.
All annual inspections complied.
The following accessories are included: crane folder with original documents, service reports, overview of...
15
Demag crane no. 1330167-11
Year 2013-09
Control voltage: 48VAC
Length: 32.7 meters
Electric hoist, Verlinde Euroblock VT4, serial no. HIX10287. Product VT406114E17ERP8405JMC20MO. Service class M4. Load: 30000 kg. Lifting height: 9 M. Lifting speed 4 / 0.67 MMIN. Manufacturer ref .: F08223 / 5. Trolley speed: 20/5 MMIN. Mains voltage: 400 V.
Jxkulju
Load capacity: 2 x 30 tons (not simultaneously) or max. 40 tons.
Remote control: HBC Radiomatic, type Spectrum A
Manufacturer Description: Search the...
15
Dismantled week 34 2021.
Analog-controlled overhead crane consisting of:
2 Main beams.
4 Boogies.
6 drive motors.
1 remote control with charger.
4 pcs weight display.
P0anr
2 pcs Verlind VT5 trolley.
Fully functional before disassembly.
Started and run by review.
Lifting capacity in hoists: 2 x 32T, maximum 40T.
Lifting height 13.5 meters.
Lifting speed 0.1-5.
Classification, hoist: M5
Span 33.18 m.
Crane weight: 33,990 kg.
All annual inspections complied.
The following accessories are included:...
8
8T Abus crane.
Uncertain of manuf. year. Think it is 1981 on the plate.
Length C-C on boogies. (C-C distance on lane) 15.170 mm. +/- 50 mm.
Can be loaded on truck.
Other cranes in stock.
ABUS DEMAG STAHL KONECRANES
Bybpqvhuj9
7
80T Konecranes crane.
Very good condition.
Manuf. year: 2003 Used very little. Has been used in a testing center.
Incl. drawings, documents, radio control ect.
Length C-C on boogies. (C-C distance on lane) Approximately 20.630 mm.
Pnhrz
Can be loaded on truck.
Other cranes in stock.
ABUS DEMAG STAHL KONECRANES
13
10T Abus crane.
Bph9b9ofk
Nearly like new.
Incl. drawings, documents, radio control ect.
Length C-C on boogies. (C-C distance on lane) Approximately 20.630 mm.
Can be loaded on truck.
Other cranes in stock.
ABUS DEMAG STAHL KONECRANES
11
Very nice and well-kept forklift.
Year of construction: 2006
Working hours: 4,760
Construction height: 2,120 mm
Height: 4,680 mm
Bx82rc3fif
Freelift.
Fork adjustment and side shift.
Joystick for controlling mast / fork.
Very compact machine with a small turning radius.
Charger 3x400V
Transport can be organized throughout Europe.
15
Really nice electric forklift with a very low number of hours, looks almost like new.
Pv3onu
Doosan B16R-5
Year 2016 Sold in 2017 1 owner's machine which has always been running and standing indoors.
Only 1628 hours.
Construction height 2150 mm
Full free lift.
Lifting height 4750 mm
Fork side change.
Charger for 400V 16A is included, as well as a water filling system for battery.
13
Jungheinrich ERD 220
Model year: 2013
Hours: 7523-6735-5031 (3 pcs. in stock.)
Lifting capacity: 2000 kg.
Lifting height: 2500 mm. (2600 mm to the top of the fork. And 2700 mm when initial lift is also lifted.
With the initial lift, it is possible to move 2 pallets on top of each other.
Low build height.
Ulwu7wwy
Servo powered steering.
Incl. charger 230V 10A
Transport can be arranged in all of Europe.
3 pcs. in stock for quick delivery.
8
Very nice and wellmaintained reach-forklift.
BT RRE160E
Manuf. year: 2011
Working hours: 8366-8557
Lifting capacity: 1600 kg.
Lifting height: 850 cm.
Bh9sidcxy0
Buildheight: 355 cm.
Full free lift.
Weight-scale, shows your load on the forks.
Digital height gauge, shows your exact height on the forks.
Tiltable cabin, makes a clear view past the mast.
The machine is completely flawless.
Battery: 48V 500Ah. 73% Remaining capacity.
Incl. 400 Volt charger.
Mast can be dismantled for transport i...
5
Toyota 8FBMT20
Year of construction: 2014
Operating hours: 2769
Construction height: 2800 mm
Lifting height: 4500 mm
Fork adjustment and side shift.
Good battery.
400V charger
New rear tires are fitted before the sale.
Ckos7zw0
Can be delivered across Europe in a Eurotrailer.
This may be of interest to you
Photo gallery: the 10 strongest forklift trucks in the world
Morlock Motors official partner of Machineseeker and Truckscout24
Machineseeker still biggest sponsors of 2nd German football league
10 valuable tricks for buying used machines online
Sell now on Machineseeker! Over 250,000 inquiries per month
Olympic Games: Machineseeker sponsors Team Germany
