5 axis machining buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
1
Elect./Voltage: Czxiqmfs MAZAK "VARIAXIS 500-5X-II" MACHINING CENTER -- Table Size / Load Capacity 15.75" x 15.75" / 661 lbs. -- Max Workpiece Size (Diameter / Height) 19.69” x 15.94” -- X Axis Travel 20.08" -- Y Axis Travel 20.08" -- Z Axis Tr... more
5
Pallet size 400 x 400 mm. Simultaneous operated axes 4+1. Bcatag80g3 Movement x-Axis 350 mm. y-Axis 550 mm. z-Axis 510 mm. Number of tools in magazine 18 pieces. Maximum spindle speed 12.000 R/min. Tool taper MAS BT 40. CNC control Mazatrol NEXUS-II more
7

VERTICAL CENTRE 3 AXIS QUASER MV204 CPL/10

Turate (CO), ItalyItaly dealership location
6808 km
2007
good (used)
Unità di Governo: Heidenhain i TNC 530 Corse: Asse X 1500 mm - Asse Y 660 mm – Asse Z 610 mm Balvgxj72o Mandrino: max. velocità di rotazione giri/min 10.000 Attacco mandrino ISO 40 Tavola: Dimensioni Tavola mm 1700 x 660 Peso ammesso Kg. 1500 Cambio utensile: Magazzino utensili 48 pos. Accessori presenti: Evacuatore trucioli a tappeto – Refrigerante A.P. Attraverso mandrino 20 bar – Volantino elettronico remotato - I dati riportati sono indicativi e potranno essere da Voi verificati nel corso d... more
7
Control System Heidenhain iTNC 530 Movement X,Y,Z [mm] 500, 450, 400 Spindle speed 18.000 Spindle: Technology: Motorspindle Speed: 18.000 rpm Power: approx. 35 kW Torque: approx. 130 Nm Taper: SK40 NC-swivel-round table: C-Axis: 360°, 33 rpm B-Axis: 160°, 26 rpm Tablesize: ø500 x 380 mm Tableloading (max.): 200 kg Equipment / Accessories: Position sensor: Direct scales in all Axis Drive X-Axis: Direct (linear engine) Workpiecemeasurement: Heidenhain TS Dwcdei Toolmeasur... more
14
Mazak Variaxis 500 – 5X II, 2012, s/n 237138, 5 Axis, Twin Pallet, Matrix Control, through spindle coolant, 18,000 Spindle, 80atc, cat40, Swarf Management with 15 bar coolant, rmp600 spindle probe, nc4 laser toolsetting probe, auto pecking cycle with load detection, synchonised tapping, Mazaac 3d high speed software package, eia/iso wpc shift, goo slope constant, shape compensation for rotary axis, high smoothing control, tool tip point control/sim 5 axis, tool radius compensation/sim 5 axis, ei... more
8

5 Axis CNC Machining Centre Maka PE70

Liverpool, United KingdomUnited Kingdom
5686 km
2007
good (used)
Working area in 3 axis - 5900mm x 1250mm x 300mm Working area in 5 axis - 5700mm x 1250mm x 300mm Travel speeds - x any axis 45m/min, z axis 24m/min 10kw Routing head water cooled, with infinitely variable speeds upto 24000rpm. 5 axis, for HSK Tools Horizontal 32 position toolchanger to accept HSK tools [ max weight of tool 4.5kg including tool holder.] 8 x Panel supports to accept various types of vacuum pods [ table divided in 2 clamping stations ] Vaccum pump 128m3 / hr with stand by ... more
1
Elect./Voltage: 200-600 V, 50/60 Cy, 3Ph Gl3feciro BIESSE ROVER A 1632 CNC MACHINING CENTER (5-AXIS): -- Specifications:Working Field "X" axis 129" (3,276 mm), "Y" axis 62" (1,574 mm), "Z" axis stroke 15" (383 mm), max. material thickness 9.6" (243 mm). -- Positioning speed: "X" Axis 262 FPM (80 MPM), "Y" axis (60 MPM), "Z" axis 65 FPM (20 MPM). -- Work Table:(6) Adjustable panel supports with lifting bars for heavy panels, (4) "ATS" vacuum pods per panel support;(2) Independent working... more
5
Pallet size 400 x 400 mm. Movement x-Axis 510 mm. y-Axis 510 mm. Eboqoas z-Axis 460 mm. Number of tools in magazine 40 pieces. Maximum spindle speed 35-12.000 R/min. Tool taper MAS BT 40. CNC control Mazatrol PC-Fusion CNC 640 5x more
7
LID MAHO DMF 220 linear year. 2007 XYZ 2200-870-650 mm Siemens 840 d Powerline SK 40 tool holder spindle speed 12,000 rpm 30 compartment tool changer IKZ 40 bar Rotoclear probe Power-on hours: 12,000 Spindle hours: 3.616 Bcp8x2bvy3 more
9
Control System Heidenhain MillplusIT Movement X,Y,Z [mm] 500, 420, 380 Spindle speed 18.000 Spindle: Technology: Motorspindle Speed: 18.000 rpm Power: 34 kW Torque: 130 Nm Taper: SK40 NC-swivel-round table: B-Axis: 180°, 26 rpm Gl8yhdm C-Axis: 360°, 33 rpm Clamping surface: ø500 x 380 mm Tableloading (max.): 200 kg Equipment / Accessories: Position sensor: Direct scales in X/Y/Z Workpiecemeasurement: Touch probe, Heidenhain TS 640 Coolingmanagement: Internal cooling unit... more


5 axis mac...
daily

New machines via email!

Stay updated!
8
2003, s/n160647, 5 Axis, Twin Pallet, Mazatrol PC Fusion 640M control, through spindle coolant, 12,000 Spindle, 40atc, BT40, Swarf Conveyor, Renishaw spindle probe, auto toolsetter. Hours power on 5,453, Auto ope 3,590, auto cut 1,539, total cut 7,627 hrs. Options – EIA, Spiral, EIA 3D comp, Rotation, Geometric, Scaling, Ext-Data I/O, High Speed, Shape Comp, Thread, Inverse time, Auto TLM, Comparison stop, Spline, G54.1, Sync.tap, G00 Slope Const, Variable 600Sets, Navigation, IC Card Running,... more
1

5-axis Vertical Machining Centre Mazak VTC 800/30 SR

Walton on Thames, United KingdomUnited Kingdom
5918 km
2009
good condition (used)
Mazatrol Matrix control Bcriubzjzn X/Y/Z axis 3000/800/720 mm B- axis ± 110° C- axis 360° x 0.001° 48 Tool Magazine CAT-40 Spindle NC Rotary Table DS50C-R1-Z 360000 positions NIKKEN TAT320 Support Unit Riser Block Swarf conveyor High Pressure Through Spindle Coolant 15 bar Simultaneous 5 Axis Machining Tool Tip Point Control 5 Axis Tool Radius Compensation 5 Axis Dynamic Compensation (EIA/ISO) 3-D Coordinate Conversion Shape Compensation for Rotary Axis Mazacc-3D High Speed ... more
1

CNC MACHINING CENTER (W/ATC, "C" AXIS) BUSELLATO JET CONCEPT

North Carolina, United StatesUnited States dealership location
518 km
2006
used
Elect./Voltage: 400 V, 50/60 Cy, 3 Ph. Nmovoekv BUSELLATO JET CONCEPT CNC MACHINING CENTER (W/ATC, "C" AXIS): -- Specifications:This machine is ideal for Stair, Window & Door component manufacturing. Working field: "X" axis 3,250 mm (127.9"); "Y" axis 1,345 mm (52.9") for routing & 1,458 mm (57.4) for boring; "Z" axis stroke 225 mm (8.9"), max. material thickness 180 mm (7"). -- Positioning Speed:"X" & "Y" axis 75 MPM (230 FPM); "Z" axis 30 MPM (98 FPM).The "X" axis (long axis) uses a hel... more
3
Pallet size 400 x 400 mm. Movement x-Axis 510 mm. y-Axis 510 mm. z-Axis 460 mm. Number of tools in magazine 60 pieces. Dwb8xu Maximum spindle speed 25.000 R/min. Tool taper MAS BT-40 Big Plus. CNC control Mazatrol Matrix more
8

5-axis/sides machining center DECKEL MAHO DMU 125 P hi-dyn

Wiesenweg 7, 86759 Holzkirchen, DEGermany
6750 km
2003
excellent (used)
DMU 125 P hi-dyn lid MAHO DMU 125 P hi-dyn year. 2003 HEIDENHAIN iTNC 530 X-Y-Z 1250-880-800 Spindle speed 10,000 rpm Tool holder SK 50 Tool changer 120 trade probe IKZ 40 bar Chip conveyor power-on hours 69372 Spindle hours 31232 The machine got a new spindle in 2016. Current spindle hours ca. 2000 Bq9svhu The machine can be seen under power. The machine is end may 2018 may need in the June 2018 available. For further questions, we are gladly available. more
1
TECHNICAL data: travel: travel in X: [mm] 1,800 Travel in Y: [mm] 2,000 Travel in z [mm] 1,100 Number of axles: 5 simultaneous Bcoomqi2wu Spindle power: [kW] 30 Tool holder: SK 40-12,000 rpm Tool changers: 60 times diameter round table: [mm] 1,700 x 1,400 weight: [kg] approx. 40,000 items and accessories: NC rotary table tool measurement Blum laser in the working area electronic Handwheel production package IKZ 40 bar filter-system 1000 litres Späneförd efendic rotating visor ... more
15
2008 , Ser No 17777, G-Tech 840 Di Control (Siemens), 40 Bar Through Spindle Coolant, 15k Spindle, 150atc, HSK63 Spindle, Spindle Probe Interface & Toolsetting Probe, FSE Filtration System , Filtermist FX4000 Fume Extraction, Swarf Conveyor, Axis Travels X=550mm Y=410mm Z=450mm B=220 Degrees (-110/+110) C 360 Degrees, Maximum Table Speed For Turning 3000rpm, Rapid Feedrates 50m/Min, Pallet Diameter 130mm, Maximum Component Size D=250mm H=250mm Bcqzikfg72 more
3

5-axis high precision machining center Kitamura Mytrunion 1

De Hoefse Weg 13, 5512 CH Vessem, NLNetherlands
6286 km
2007
as good as new (ex-display)
Kitamura 5-axis machining center type Mytrunnion-1 with Fanuc 300iM control. Year of make: New (2007). UNUSED! Control: Fanuc 300iM. drive 15.000 rpm Rapids X,Y-axis. 50 m/min. Z-axis. 36 m/min. A-axis. 8,000 gr./min (22.2rpm). rapids B-as. 360,000 gr./min (1.000 rpm). Table: size Ø 120 mm. Max. load 20kg. Max. workpiece diameter Ø 350 mm. Max. workpiece height 215 mm.   Machine equipped ... more
1
Elect./Voltage: 400/440 V, 50/60 Cy, 3 Ph. Enl8h90 MORBIDELLI AUTHOR 600 KL CNC MACHINING CENTER (W/ATC, "C" AXIS): -- Specifications:Working Capacity "X" Axis is 144" (3,660 mm), "Y" axis 54.5" (1,385 mm) when routing & 45" (1,145 mm) when boring, "Z" axis stroke is 11" (280 mm), max material thickness is 7" (180 mm) -- Positioning speed:"X" Axis 196 FPM (60 MPM),"Y" axis 131 FPM (40 MPM), "Z" axis 74 FPM (22.5 MPM); YASKAWA AC Servo motors in all (3) axes. -- Worktable:(12) Vacuum hold... more
5

CNC Vertical Machining Centre 5-Axis Huron EX-C

Zevenbergen, NetherlandsNetherlands dealership location
6233 km
1999
good (used)
5-Axis. Table size 2000 x 600 mm. X-axis travel (column right / left movement) 1600 mm. Y-axis travel (column back/forth movement) 700 mm. Z-axis travel (spindle up / down movement) 800 mm. 9kxbfwt8h A-axis (table rotation) travel amount/indexing 0,001° 360.000°. B-axis (spindle head) travel amount/indexing 0,001° ± 100°. Spindle taper HSK-63 A. Max. / min. spindle speed 14.000 1/min. Number of tools in magazine 32 pieces more
6
5- axis control profile machining center HAFFNER, typ BAZ 580-7, date of construction 2009 - Travelling capacity x- axis about 14,00 m - Automatic tool changer with six places - Complete profile machining wih sawing in aluminium and steel (Steel profile machining to about 7 mm - Cutting saw blade diameter 500 mm - Spindle saw blade diameter 400 mm, sawing with all angles - We can show the machine under electric power. Travelling capacity: - X- axis: 14.500 mm - Y- axis: 1.450 mm - ... more
7
5-axis HSC milling machine Röders RXP500DSC with linear direct drives in all axes and torque drives in the rotary axes. Travels: X450mm, Y400mm, Z240mm Distance spindle / table: approx. 315mm - Linear direct drives in all axes - wear-free - Tool changer 42-fold - Thermo package - high-precision refrigerator for the entire machine (hysteresis +/- 0.1K) - Measuring laser for fully automatic measuring of milling tools (length / diameter / contour / cone angle) as well as wear monitoring in... more
15
2009, Ser No 18009, G-Tech 840 Di Control (Siemens) , 40 Bar Through Spindle Coolant, 20k Spindle, 120atc, HSK63 Spindle, Filtermist FX5000 Fume Extractor, Renishaw Spindle Probe Interface & Toolsetting Probe, FSE Filtration System, Swarf Conveyor, Axis Travels X=520mm Y=730mm Z=510mm A=120 Degrees (-110/+10) C=360 Degrees Rapid Feed Rates 50m/Min, Maximum Table Speed For Turning 1800rpm,Pallet Diameter 300mm, Maximum Component Size H=350mm D=420mm. 2 spare pallets. Hours on the machine have be... more
4
5 axis machining centre X 2200 / 600 Y / Z 500 mm Spndel ISO 40, 12,000 rpm. Cooling through spindle 20 bar 2. tool magazine 40 x Rigid table 1250x800mm Rotary tilting table 600mm - 350kg Chip conveyor scraper conveyor Nffih Kinematics software - 3D option 2 DCM - dynamic collision monitoring Package increased accuracy Optical measuring system HEIDENHAIN High pressure washing system Curtain wall pendulum operation CNC controller HEIDENHAIN TNC530 more
1
Elect./Voltage: 400/440 V, 50/60 Cy, 3 Ph. Eeejzs2 WEEKE BHC 350 CNC MACHINING CENTER (W/ATC, "C" AXIS): -- Specifications:Work area cap "X" axis 3,250 mm (128"), "Y" axis: 1,250 mm (49"), Z-axis 100 mm (5.3"). -- Positioning Speed:"X " axis is 263 FPM (80 MPM), "Y" axis 164 FPM (50 MPM), "Z" axis 65 FPM (20 MPM). -- Worktable:(6) Movable "K-Table" support rails w/side mounted raise-and-lower panel feeding rails, (2) matrix vacuum pods per support.(6) Pneumatic backstops for large panels... more
1

3-Axis Machining center Hurco VM30I

Wiesbaden, GermanyGermany
6536 km
2016
good condition (used)
Verfarwege: X/Y/Z (1.270/510/510)mm SpindeldrehzahlMax 10,000 U7min Spindle power 15 kW Spindle torque 102 Rapid traverse x/Y/z axis 24/24/24 Magazine places 20 No cooling through the spindle Bcnpf0uxb7 CE more
6
5-axis simultaneous processing center in gantry design Built in 2006 New Milling spindle (November 2017) Spindle hours of 800 h (as of June 2018) technical data: Heath Grove control iTNC 530 electronic hand control panel HR 410 Ethernet interface Linear displacement measuring systems Positioning range x/Y/Z 1,000 x 1,080 x 600 mm 25 kW (S1-100% ED) Torque 79 NM at 3,000 rpm. Tool holder HSK-A 63 Speed 18,000 rpm. Feed 20,0... more
7
Control System Heidenhain iTNC 530 Movement X,Y,Z [mm] 800, 800, 800 Spindle speed 8.000 Spindle: Technology: Gear spindle Juzg8u Speed: 8.000 rpm Power: 28 kW Torque: 727 Nm Taper: SK50 Swivel: head B-Axis - 0,001° NC-round table: C-Axis: 0,001° Speed tabletop: 30 rpm Holding torque: 5.000 Nm Clamping surface palett: ø800 x 630 mm Tableloading (max.): 1.200 kg Equipment / Accessories: Position sensor: Direct scales in all Axes Workpiecemeasurement: Touch probe, Infrare... more
4

Five axis machining center Wele UG 800

Blumberg, GermanyGermany
6663 km
2010
good condition (used)
Machining center Wele UG 800, year 2010, HEIDENHAIN iTNC 530 little used, 1400 hours. Portal construction tech. Data X: 800 mm Y: 950 mm Z: 650 mm A: + 30 / 120 degree Yrunuk C: 360 ° magazine: 60 x 40 speed ISO: 14 000 rpm Speed: 40 m / min control: i TNC 530 IKZ 50 bar Spänemanagment more
x-travel: 1000 mm y-travel: 1000 mm z-travel: 500 mm B-axis (table): 360 ° spindle taper: HSK A63 working spindle range of revolution per minute : 15000 U/min rotary table: 260 mm control: Andronic 2060PKM feed: 1 - 5000 mm/min rapid traverse X,Y: 15 m/min. rapid traverse Z-axis: 12 m/min total power requirement: ca. 42 kW weight of the machine ca.: 6,0 t dimensions electric cabinet LxWxH: 2,4x0,6x2,2 m dimension machine [...]: 3,5x2,4x3,2 m 5 axis BAZ in parallel kinematic - automatic tool clam... more
1
Elect./Voltage: 200-600 V, 50/60 Cy, 3Ph Juwrzu BIESSE ROVER 27 CNC MACHINING CENTER (W/ATC, "C" AXIS): -- Specifications: Working cap. "X" Axis is 135" (3,432 mm), "Y" axis is 39" (989.5 mm) for boring and 51" (1,300 mm) for routing, "Z" axis stroke is 9.8" (250 mm), max. material thickness is 6" (155 mm). -- Positioning Speed:"X" & "Y" Axis is 246 FPM (75 MPM), "Z" axis 98 FPM (30 MPM). -- Work area:(8) Adjustable panel supports, (3) adjustable vacuum pod per support; (8) pneumatic lif... more
5

Milling Machining Centers 5 Axis HELLER MCA - H 150

Annaberg-Buchholz, GermanyGermany dealership location
6816 km
1995
used
x-travel 600 mm y-travel 450 mm z-travel 530 mm Kw8zx9hz control Uni-Pro CNC 90 tool changer 60 x pallet places 2 size of pallet 500 x 400 mm total power requirement 97 kW dimensions of the machine ca. 5,00 x 4,50 x 3,80 m more
7
X-Y-Z 500 -450-400 mm, table surface 630 x 500 mm, table load 200 kg, workpiece tabele swivle range -5/+110°, nc-rotary table 360°, milling spindle 63 HSK- 18.000 U/min, spindle drive 9,0/13,0 Kw, tool length 300 mm, tool dia. 80/130 mm, Werkzeuggewicht 6 kg, rapid travel 24 m/min, machine weight 6,5 to. equipped: * CNC SIEMENS 840 D-SL * Software: DMG MORI Messenger * Electronic handheld control * CELOS * 21,5 Ergoline Control mit Multi-Touch-Screen Bclue8ynt2 * 30 - ATC * NC-swivel... more
12
Okuma Genos M560R-V Construction year: 2014 Control: OSP - P 300 m-R Power-on hours: 4450 h Spindle run time: 1190 h Technical data type: vertical travel distance X-axis [mm]: 1,050 Stroke Y-axis [mm]: 560 Traverse path Z-axis [mm]: 460 Main spindle RPM Max [RPM]: 15,000 Main spindle power maximum [kW]: 22 Number of tool magazine places [PC]: 32 Table/pallet length x width [mm]: 1.300 x 560 maximum table load [kg]: 900 Tool system: BT 40 additional features - workpiece measurem... more
3

3-Axis Machining Center SIGMA ZENIT M

Dinslaken, GermanyGermany
6376 km
2001
ready for operation (used)
Control: HEIDENHAIN 426 x axis: 1600 mm Gouss37 Y-axis: 600mm Z-axis: 685mm Table size 1700 x 650 mm Spindle speed 12000 RPM - 18.5 KW Spindle retainer: SK 40 - DIN 69871 Tool changers: 50 tools Chip conveyor more
6

5-axis Machining Centre MCM Clock 700

Kuringen, BelgiumBelgium dealership location
6308 km
2000
good (used)
MCM 5-axis machining cell Consisting of two machines with FMS pallet cell Gvel9g Type:Clock 700 Year:2000 Control:NUM Pallets:500x500mm Pallet: Horizontal/Vertical NC Table: +135 / -45 degrees Travel XYZ:700x710x850mm Pallet changer: 24atc Toolchanger: 2 x 148 atc Max.spindle speed:8000rpm Spindle motor:25kW Spindle taper:ISO50 Heavily reduced price:64 000 EURO dismantled and loaded to trucks for the package of two machines with FMS system With good tooling package and spar... more
1

CNC MACHINING CENTER (W/ATC, "C" AXIS) I M A BIMA 310

North Carolina, United StatesUnited States dealership location
518 km
2001
used
Elect./Voltage: 400/440 V, 50/60 Cy, 3 Ph. Bbu9pywqmj IMA BIMA 310 CNC MACHINING CENTER (W/ATC, "C" AXIS): -- Specifications:Working Field "X" Axis is 157.4" (4,000 mm), "Y" axis is 47.2" (1,200 mm), "Z" axis stroke is 17.32" (440 mm), max material thickness 3.9" (100 mm). -- Positioning speed:"X" & "Y" axis at 197 FPM (60 MPM ), "Z" axis is 66 FPM (20 MPM);AC Brushless Servo motors with digital drive & linear guides ensure high speeds with a smooth acceleration-and-deceleration. -- Work... more
6

4-axis CNC machining center Holz-Her Promaster 7123 K

Hochheim am Main, GermanyGermany dealership location
6547 km
2007
used
Gerbauchtmaschine Year of manufacture: 2007 State: Funktionsgeprüft Gnldfilo8 Equipment and technical data: Console machine Processing size in x: 3.200 mm Processing size in Y: 1,470 mm Maximum height of procedures in Z: 325 mm Motor spindle: 11 kW air cooled With C axis Incl. laser pointer Incl. ride plate tool changer with 18 courses 6 consoles including 12 vacuum cleaners Incl. manual control unit Incl. 3-field safety mats Incl. Nutsäge Horizon... more
8
3-axis CNC machining centre Fanuc Robodrill-T21i FL CNC Fanuc x 700 mm y: 400 mm w: 330 mm Spindle: 11 kW Tool holder BBT 30 (big plus) RPM 150-24,000 rpm. Tool magazine with 21 stations Tool diameter of 80 mm Tool length of 210 mm Tool weight of 2 kg Rapid traverse 54 m / min Feed 30 m / min Weight: 2200 kg Accessories: * 4th axis Built 10/2008 8z38qh can be seen in operation under power. more
1
TECHNICAL DATA Traverse path X, Y, Z 1620 x 810 x 760 mm Chuck SK40 maximum spindle speed 7500 RPM (gearbox) tool changer 24 compartment. EQUIPMENT and accessories 4 te. Axis HAAS HRT160H Tool breakage control hand panel Spiral chip conveyors Programmable coolant nozzle Visual quick code IKZ inner coolant supply (cooling through spindle) additional coolant filter system Coolant tank 300 l Automatic compressed air gun Higher feed speed Z = 25.4 m / X 22.9 m = maximum feed 21,150 m... more
10

5 AXIS VERTICAL CENTRE BRETON XCEEDER 1200 RT

VIA CARLO CATTANEO 33, 22078 TURATE ( CO ), ITItaly
6808 km
2008
excellent (used)
HEIDENHAIN TNC 530-Government Unit: Racing: 1000 mm X 1200 mm-axis Axis Y – Z axis 700 mm Chuck: 18000 RPM rotation speed Max. Spindle taper HSK 63 to Spindle motor power 40 KW NM 137/100 X/Y/Z axis rapid feed: 60/60/60 m/min Table: tilt table axis -30/+120° C-axis Rotation ± 360° 30 axle rotation speed rpm rpm 60 C axis Tool change: 60 tool magazine pos. Max tool weight 20 Kg. Bb7kg2qsxi Max size utens. Diameter/length. 90/140 Accessories: chip conveyor – refrigeration A.P. throug... more
15
Second-hand machine of Okuma Genos M560R-V Construction year: 2014 Control: OSP - P 300 m-R Nds0p Power-on hours: 4450 h Spindle run time: 1190 h Technical data type: vertical travel distance X-axis [mm]: 1,050 Stroke Y-axis [mm]: 560 Traverse path Z-axis [mm]: 460 Main spindle RPM Max [RPM]: 15,000 Main spindle power maximum [kW]: 22 Number of tool magazine places [PC]: 32 Table/pallet length x width [mm]: 1.300 x 560 maximum table load [kg]: 900 Tool system: BT 40 additional... more
1
Elect./Voltage: 400 V, 50/60 Cy, 3 Ph. Envpnt2 MORBIDELLI AUTHOR 600 KS CNC MACHINING CENTER (W/ATC, "C" AXIS): -- Specifications:Working Capacity "X" Axis is 114" (2,900 mm), "Y" axis 54.5" (1,385 mm) when routing & 45" (1,145 mm) when boring, "Z" axis stroke is 11" (280 mm), max material thickness is 7" (180 mm) -- Positioning speed:"X" Axis 196 FPM (60 MPM),"Y" axis 131 FPM (40 MPM), "Z" axis 74 FPM (22.5 MPM); YASKAWA AC Servo motors in all (3) axes. -- Worktable:(6) Vacuum hold-down... more
6
1 gebr. CNC machining center - universal - 5 axis Make MATEC Model 30-HVK Year 2014 Bcrdb00fox Control Siemens 840D-Solutionline Technical data: X-travel 1,300 mm Y-travel 600 mm Z-travel 800 mm-driven axles: 5 Equipment / Accessories: workspace full enclosure with roof rinse-gun lighting of workroom conveyors direct measuring system in all axes 1-axis NC Swivel Head, +/-105° swiveling NC rotary table with direct drive SK... more
15
Hours in operation: System ON: 234 hours Spindle: 75 hours Axes: 82 hours Control system: Heidenhain iTNC530 Gtsp08pua Travel distances: X: 2320 mm Y: 1050 mm Z: 816 mm A: + - 110 ° C: + - 400 ° Automatic locking of axes Table dimensions: 3000x1500 mm Feed rate: 40/30/30 m/min Tool changer: AVN 12 Number of tools: 12 Maximum tool weight: 5 kg Machine dimensions: 5650x3320 Machine weight: 7500 kg Accessories: Extraction ADAMIK FT 650 - 7.5 kw Measuri... more
5
New range 5 axes machining centre. Its structure is compact, powerful, versatile and easy to handle for the machining at high speed of non-ferrous materials (technical plastics, thermoformed plastics and their by-products). The machine has a strong moveable gantry that guarantees high speed working as well as a high precision and quality finishing. Table dimensions X-2000 , Y - 1600 , Working area X-2900 , Y-2100mm , Z-1200 mm (See PDF file) HSD 9kw spindle, HSK63F tool holder , rpm 24000... more
5
1 used manufactoring system Mazak Variaxis 630-5X with Palletech, linear pallet pool existing of: - 2 pieces vertical 5-axis machining center Variaxis 630 -5X with Mazatrol Matrix control - 1 piece Palletech linear pallet pool with 28 pallets on 2 floors with loading and unloading station. technical specification: 2 pieces Mazak 5-axis Variaxis 630 - 5X each: stroke X- Y- Z- axis mm 630 x 765 x 510 stroke A- axis degree +30 to -120 stroke C- axis degree 360 pallet size mm 500 x 500 ... more
15
CINCINNATI 5-axis CNC machining centre Type:MILACRON T-35 Year:1995 Control:ACRAMATIC 950 Pallet size:800x800mm Full B-axis 0,001 degree Vertical/horizontal milling head:+30-120 degree Twin pallets Travel XYZ:1524x1524x1574mm Max.spindle speed:6000rpm Toolchanger:130atc Main motor:30Hp 22,5kW Max.table load:2000Kg Cl2g2flq With many pallets in racking Two machines available for sale All books and technical data are present more
1
Elect./Voltage: 600 V, 60 Cy, 3 Ph. 2q7dim HOMAG BOF 211 / VENTURE 12L CNC MACHINING CENTER (W/ATC, "C" AXIS): -- Specifications:This machine is IDEAL for wood door, window & stair manufacturing: -- Working field"X" axis 204" (5,200 mm), "Y" axis 51.2" (1,300 mm), "Z" axis stroke 31.5" (800 mm), max. material thickness 11.8" (300 mm). -- Position speed:"X" & "Y" axis 197 FPM (60 MPM), "Z" axis 98 FPM (30 MPM). -- Worktable:(8) Moveable K-table support rails with side mounted raise-and-... more
2

- USED - 3-AXIS CROSS TABLE VERTICAL MACHINING CENTRE  FAMUP MCX 650

Matelica (MC), ItalyItaly dealership location
7213 km
1993
ready for operation (used)
Bcskfresr9 X-AXIS TRAVEL: 670 mm Y-AXIS TRAVEL: 450 mm Z-AXIS TRAVEL: 470 mm SPINDLE: ISO 40 - DIN TABLE SIZE: 420 x 900 mm TOOL MAGAZINE: CHAIN-TYPE ; 12 POS CONTROL UNIT: SIEMENS 810M OVERALL DIMENSIONS: 2200 x 3920 x 2965 mm PRICE: On demand more


5 axis mac...
daily

New machines via email!

Stay updated!

to

to

Edit search
5 AXIS MACHINING
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close