Automatic grinder buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
1
Elect./Voltage: 240 V, 60 Cy, 3 Ph. Bbusl2nzmi GOECKEL G 65EL Automatic Straight Knife Grinder;Working length up to 5,080 mm (200") and 254 mm (10") for either planer or chipper knives. -- Construction: Welded in cell design. Guideways hardened and ground solid ways. Machine table electromagnetic with rotating chuck. -- Downfeed system: Servo variable speed down feed with impulse feed; end-end and rapid positioning. Feed rate 0.0002 ~ 0.02 mm/Min. -- Carriage/Head: Servo controlled varia... more
1
Bctygcgiqm Automatic belt grinder for Cutlery monobloc or hollow handle or similar parts. Two doubble stations left and right for grinding of edges of Knifes bothsides on same time. With oszylating. Different shapes by cam follower. Production Rate 400-500 pcs per hour more
5
- grindable pipe diameter up to 150mm - cross adjustment of support - adjustable depth stop - mitre grinding 30° to 90° - grinding belt dimensions 2000 x 150mm - surface grinding opening 300 x 150mm - contact plate B 150 / D 200mm - pulley B 150 / D 200mm - grinding belt speeds 15 + 30m/min - drive 400 V / 2.6 + 3,1kW special equipment: - pneumatic feeding accessory GU RA Wvus8jh2 - contact role 1 inch / 1 1/4 inch / 1 1/2 inch - suction more
5
• dimensions 1600x1220x1800 mm; • suitable for frozen meat; • 2 feeding speeds; P3aan7 • 1 grinding speed; • power 400 V, 50 Hz, 32,4 kW. more
4

automatic grinder Tormadex Lithormatic 1200 E 10

Gersfeld, GermanyGermany dealership location
6620 km
1993
used
Grinding diameter max. 180 mm grinding length max. 1200 mm Power:. 300-1800 pcs / hr. Spindle motor: 3.0 hp Oszilation: 0.75 HP brush reduction: 0.5 hp grinding diameter with 10 spindles 90 mm diameter grinding every 2nd Spindle: 180 mm Speed: 1500/2000/2600/3200 r / min. Weight: 1190 kg Machine dimensions (L x W x H): 2450 x 1200 x 1540 mm Cddjmlbf more
5
• Maximum tool width 330 mm • Tool diameter (min-max knife heads) 80 - 300 mm • Grinding wheel diameter (min-max) 125 mm • Grinding wheel bore size 60 mm • Grinding wheel speed 4000 rpm • Maximum grinding speed 530 mm/min • Grinding wheel drive 1,1 kW • Clearance angle 15 - 35° • Coolant tank 125 L • Motor coolant pump 0,28 kW Jfcciqp • Connection values, total 2 kW more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Yrrjuk ERMA ASM 45 automatic knife grinder for chipper, planer and paper knives. with a working length of 4,300 mm (168") length capacity. -- Grinding motor with 7.5kW (10 HP) for the grinding head. -- Flood coolant system. -- Variable speed head travel and replaceable ways. -- Magnetic knife bar 10' x 8". -- Manuals and some tools. more
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Y2cpil CNC circular saw Topper/Facer is designed to gring the tops and faces of triple chip, variable pitch and alternating top or face. -- An industrial-grade computor and touch scree interface give the operator complete control of all functions. Grinding parameter for up to 14 saws, 6" to 36" diameter, can be stored in memory for instant set up. -- Features: -- Pentium 233 MMX [...] control. -- Touch screen for easy operation. -- Store memory for ... more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Fwzscwn Rigid construction means low vibration displacement for super finish. Flood coolant with swing open splash doors keeping spray in the machine. -- Total removal grind with lift-off on return stroke. Precision alternate angle adjustment for right and left uniformity of 3/100 of a degree. -- Power saw lift with electronic control with automatic saw locator that sets saw to exact position. Power adjustment on hook and top angle moves head at the push... more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. 30ty9u9z WRIGHT W-150HB-B Automatic Face and Topper -- Heavy duty automatic saw sharpener for side grinding of carbide saw blades. Circular saw size 6" to 48". Blades up to 36" dia. are ground automatically; blades up to 48" are ground manually on this machine. -- (2) 3/4 HP motors for each grinding spindle, with spindle speed of 5,150 RPM's. -- Includes the following features: Grinds radial angles from 0 to 4°; tangential angles of 0 to 6°; and hook ang... more


automatic ...
daily

New machines via email!

Stay updated!
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bcv8g39ghl FRIULMAC RANDOMAX EVO DEFECT SAW AND END MATCHER ALL IN ONE -- Automatic defect cutting and end matching machine with: -- 7-1/2 HP (5.5 kw) trim saw -- 1-1/2 HP (1.2 kw) scoring saws -- 8 HP (6 kw) profiling unitsCapacities: -- 8” (200mm) min. to 78” (2000mm) max. length -- 2” (50mm) min. to 15-3/4” (400mm) max. width -- 1/8” (10mm) min. to 1-1/2” (40mm) max. thickness -- Conveyor belt speeds from 30-... more
3
Panhans S45 3.2m Automatic Beamsaw with Tilting Saw Carriage - 2005 CE Bczupgru3f Cutting length 3200mm Cutting depth 3200mm Cutting height max 60mm at 90 degrees Cutting height max 40mm at 45 degrees Main saw motor 7.5kw 350mm dia main blade Saw carriage feed speed 0 - 40m/min variable Pusher fence variable speed 0 - 25m/min forward, 40m/min return Cutting height adjustment with 4 levels Mitre cutting from 0 to 45 degrees Pusher with 5 panel grippers and 2 stops Touchscreen con... more
7
"B" AXIS 1 DEGREE range -15/+225, 1000MM CENTRE DISTANCE x 175MM HEIGHT, 2 EXTERNAL WHEELS 500/400MM, INTERNAL GRINDING, ACTIVE LENGTH POSITIONING, SWIVEL OF TABLE 8.5 DEGREES, COOLANT TANK, TAILSTOCK WITH FINE TAPER ADJUSTMENT, SENSITRON AIR GAP ELIMINATOR, FANUC 16T. MACHINE AVAILABLE TO END USER CUSTOMER ONLY WITH OPTION OF INSTALLATION, OPERATOR TRAINING, SERVICE ETC GRINDING MACHINES FOR RENT..... WE BUY/SELL ONLY SELECTED STUDER MACHINES DIRECT TO/FROM CUSTOMER AND OFFER INSTALLATION... more
4

Spiral drill grinder SCHANBACHER S 3-50

Bünde, GermanyGermany dealership location
6460 km
1973
used
grinding range 3-50 mm 9h220qtik sharp cornered angle min./max. 90-140° weight ca. 120 kg dimensions of the machine ca. 810 x 570 x 1260 mm Condition: ready for operation Electric 380 Volt Protective hood Fine angle adjustable / grinding - kind tridimensional. Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
1

AUTOMATIC CNC SHAPER (SHAPE & SAND) UNIQUE 4500

North Carolina, United StatesUnited States dealership location
518 km
2006
used
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Etbidgf UNIQUE 4540 Shape and Sand (CNC) with (4) stations. -- General Description: (4) shaper heads of which (2) can be used for sanding. Ridged one-piece welded steel frame double spindle shaper (CNC controlled jump cope & cope) with two 45° tilting sanding stations. All heads are floating and displaced via rub collars making this machine suitable for shape and sand on pre-hogged arched raised panels. Jump cope on first shaper eliminates tear out o... more
4

Push Fed Automatic Upstroke Crosscut Stromab Matrix

Liverpool, United KingdomUnited Kingdom
5686 km
2004
good condition (used)
Stromab Matrix Push Fed Automatic Upstroke Crosscut - 2004 CE A robustly built range of upstroke crosscutting machines designed for programmable and repetitive cutting from lengths of standard or random length long timber. The saw unit has a pneumatic upstroke action and is fitted with a Matrix type pusher unit for automatic feeding Specification Saw Unit TR500 Self braking motor 10hp Saw blade diameter 500mm Max cutting width (refer to chart)360mm Max cutting height (refer ... more
5
saw blade diameter:400 mm cutting diameter:130 mm stroke:150 mm capacity 90 degrees: square:115 mm feeds hydraulic /stepless:0 - 1,5 m/min engine output:2,0 / 2,6 kW Bu2mipxl saw blade turning speeds:10 + 20 U/min total power requirement:12 A dimensions of the machine ca.:1,5 x 1,1 x 1,85 m weight of the machine ca.:1,1 t more
5
-----MACHINE AVAILABLE TO END USER CUSTOMER ONLY----- *****ONLY 14,700 HOURS UNIVERSAL STUDER S36 FAVORIT***** 500mm GRINDING WHEEL, 1000mm BETWEEN CENTRES x 175mm CENTRE HEIGHT, MOVABLE TAILSTOCK (not like many that are FIXED restricting machine setups!!!) WITH TAPER FINE ADJUSTMENT, WHEELHEAD ZERO DEGREES +/- 8.5 DEGREES, SENSITRON, LOW WORKING HOURS, IDEAL PRODUCTION GRINDER FOR GRINDING CARBIDE - TOOL STEEL - STAINLESS - HARDENED STEEL ETC....PRICE... more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Glvrq9odi US CONCEPT CHB-12 Hauncher/Notcher;The US CONCEPTS CHB-12 Hauncher-Notcher is designed to notch along the edge of the board or across the end. -- Typical applications: Box joints, finger joints, bee boxes, hinge notches, coping, profiling in furniture and window industries, decorative cuts, beaded frame cabinets, toe kick notches, etc. Equipped with & Spec's: -- 40 MM horizontal spindle that moves up hydraulically past the table with the clampe... more
3

Automatic Punching Press Mubea Mubea VP600

Köln, GermanyGermany dealership location
6416 km
1994
used
pressure: t no. of strokes: Hub/min sheet width:1200 x 750 mm weight of the machine ca.: t :80 mm Gvyz7l2x8 max. material thickness:20 mm min. material thickness:1,5 mm Mubea plate punching machine with coordinate table and CNC control. more
2

Horizontal Bandsaws EVERISING 300HB Automatic Horizontal Bandsaw

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Gtoxmyxr more
3
bore diameter 26 mm swing diameter 140 mm DIN 52022 Gr. 4 spindle diameter in front bearing 55 mm Uqvqibp7u work height max. 1050 mm turning speed range 205 - 3280 U/min rapid speed 2 m/min feed speeds infinitely variable 0 - 1200 mm/min number of slides 3 total power requirement 3,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 1,80 x 1,00 x 1,60 m stepped drive, with autom. electro-magnetic speed control for drive with 3 slides, with electrohydr. control acc.: variou... more
8

Tool Presetting Equipment ZOLLER VENTURION 450 PILOT 3 SEMI AUTOMATIC TOO

West Lothian EH54 9HW, United KingdomUnited Kingdom
5581 km
2014
good condition (used)
2014, s/n V4R4C300074, c/w – CNC Automation package, power spindle with auto focus, SK40 and HSK63 reducers/adaptors, manual Balluff System RFID chip system, Data output, Tool management system (Zoller TMS), CAM Interface Hmnn28lj more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Ksjzyi3f UNIQUE 313 Automatic Shaper for Miter DoorsMiters the end of (2) cabinet door rails on each [...] & Features: -- Automatic cycle controlled by maintenance-free PLC software for accurate & easy alignment of mitered corners; -- (2) 5 HP Dual-motors for shaping with 1-1/4" spindles. -- (2) Pneumatic clamps hold workpiece on either side while parts are being shaped, unlimited part length. -- 1" Max. part thickness, 4" max. part width. - Staggere... more
4

Hacksaw - Automatic BEHRINGER Super A-200

Dreieich, GermanyGermany dealership location
6568 km
1982
used
cutting diameter 200 mm band length 350 mm Dkdve9sp8 cutting lenght max. 600 mm cutting range max. 180 x 180 mm dimensions of saw-blade 350 x 35 x 2 mm no. of strokes 52/66/81/104/132/162 Hub/min coolant voltage 380 V total power requirement 3,0 kW weight of the machine ca. 470 kg more
15

Horizontal Bandsaws HYD-MECH H10A 10" / 254mm Twin Pillar Automatic Horizontal Bandsaw

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Serial No. HSA0307115 Capacity Rounds 10"/ 254mm Squares 10" x 10" / 254mm x 254mm Twin Pillar Yes Input 415/3/50 5hp approx Speeds 50-350 sfm Twin vices Yes Stroke of feed vice 24" / 609mm Multi Feed Yes Fitted with Coolant, Variable Downfeed, Bundle Clamp and Swarf Screw. Equipment 10' / 3048mm Roller Tracking Zi8lntk Length Machine - 7' / 2133mm. Tracking - 10' / 3048mm Width Machine - 7' / 2133mm. Tracking - 2' 10" 863mm Height Machine - 5' 10" / 1778mm. Tracking - 2' 8" / 813mm Nett we... more
1
turning diameter ca. 100 mm turning length 100 mm Uqvp8qkjt number of slides 2 spindle hollow 42 mm face slide travel 55 mm turning speed range max. 5000 U/min greates pass round over bed 240 mm feed speeds 20 - 400 mm/min rapid speed 6 m/min total power requirement 2,2 kW weight of the machine ca. 1,1 t range L-W-H 2,80 x 1,20 x 2,00 m with connector field control more
6

Tool Grinder - Universal DECKEL S11

More Deckel S 11
Günzburg, GermanyGermany dealership location
6748 km
1984
used
max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm current capacity 380 kVA power capacity - grinding motor kW speeds of grinding spindle 2000 - 10000 U/min total power requirement 2,2 kW Mechanic: very good Optical condition: newly painted The machine can be viewed under current. operating key and instruction 486 HS 380 V, 50 Hz, with CEE plug u. Electric wire Color: repainting ligh.- u. traffic gray motorized height adjustment, axial grinding s... more
1
Elect./Voltage: 600 V, 60 Cy, 3 Ph. Bbwozn0oxa BALESTRINI C 70 Double sided Shaper -- Automatic feed through shaper profiles various chair, table and casegood components from a prepared template. The feed through system allows curved or extremely long parts to be shaped with little or no limitation. Equipped with: -- (2) Vertical shaper spindles, 7.5 HP motor each; 30 mm dia. spindles, 8,000 RPM cutter rotation; reversing rotation by switch for climb cut or conventional cut. Specifications:... more
4
cutting diameter 250 mm saw band length 3010 mm cutting width 330 mm dimensions of saw-band 3010 x 27 x 09 mm cutting speed 35 / 75 m/min mitter cutting 45 ° power capacity 1,5 kW coolant voltage 400 V total power requirement 2,2 kW weight of the machine ca. 700 kg 3gtisvayf dimensions of the machine ca. 2,60 x 1,75 x 1,70 m - Fab. No.: 0003000633 more
6
cutting diameter 260 mm saw band length 2660 mm cutting width 400 mm capacity 45 degrees: round 160 mm capacity 45 degrees: flat 160 x 260 mm capacity 45 degrees: square 160 x 160 mm capacity 90 degrees: round 260 mm capacity 90 degrees: flat 400 x 260 mm capacity 90 degrees: square 260 x 260 mm material feed length 500 mm saw band feed 17-120 U/min dimensions of saw-band 2660 x 25 x 0,9 mm drive saw-band 1,5 kW drive hydraulic 0,25 kW total power requirement 1,75 kW weight of the machine ca. 66... more
2

Band Saw - Automatic - Horizontal BTM 560 A

Bühl, GermanyGermany dealership location
6593 km
1999
used
cutting diameter 560 mm saw band length 8020 mm cutting width 1,1 mm capacity 90 degrees: round 560 mm capacity 90 degrees: square 560 x 560 mm dimensions of saw-band 8020 x 1,1 x 54 mm feed length 550 mm Uqvwqkgcj feed length: multiple 9999 mm cutting speed 17 - 127 m/min control CEB, SAW III total power requirement 7,5 kW weight of the machine ca. 7,6 t range L-W-H 4,30 x 2,40 x 2,56 m acc.: roller track 3000 mm, roller track 1800 mm, roller track 850 mm, chip converyor, coolant more
5
total power requirement:4,2 kW weight of the machine ca.:1,5 t dimensions of the machine ca.:1,5 x 2,5 x 2 m saw band length:4400 mm cutting speed:15 - 150 m/min work height max.:750 mm capacity 45 degrees: round:rechts 330 mm capacity 45 degrees: flat:rechts 320 x 335 mm Cnb8uaxs capacity 45 degrees: flat:links 305 x 335 mm capacity 45 degrees: round:links 305 mm capacity 90 degrees: flat:500 x 335 mm capacity 90 degrees: round:335 mm cutting range 30° flat:rechts 170 x 335 mm Cutting area at ... more
1
Elect./Voltage: Ssz3k0 VOORWOOD A 178 Shape and Sand Feed Trough -- Single sided, feed-through, profile shaper with sanding. Capacity: -- 5" x 5" min. part size, 1/8" - 1-1/2" max. thickness, 1-3/4" max. profile face; - LH (left hand) in-feed side Equipped with: -- (6) workstations: (2) 5 HP - 6,000 RPM shaping stations with 1-1/4" dia. x 2-3/8" long spindles, max. cutterhead dia. 6"; -- (4) 1 HP - 1,500 RPM Turbosand sanding stations, 1-1/4" dia. x 4" long spindles, all spindles adjus... more
6

Bar Automatic Lathe - Multi Spindle TRAUB TB 42

More Traub Tb 42
Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
1970
used
number of spindles - Hp0w7obwc spindle passage - mm turning length - mm Accessories: Cross drilling unit, revolver quick drilling unit, curve etching more
6
cutting diameter 305 mm saw band length 5620 mm cutting width 305 x 380 mm cutting speed stufenlos 16-90 m/min total power requirement 7,2 kW single feed stroke 10-510 mm multiple stroke until 4590 mm main drive 5,5 kW hydraulic motor 1,5 kW coolant pump 0,12 kW dimensions of saw-band 5620 x 34 x 1,1 mm weight of the machine ca. 3,1 t Qmo9zdlkm dimensions of the machine ca. 2,2 x 3,1 x 1,80 m Condition: good Electric 380 Volt CNC-control Cooling equipment Diverse sawbands Roller con... more
2

Hacksaw - Automatic KASTO PSB 260 AU

Bühl, GermanyGermany dealership location
6593 km
1982
used
cutting diameter 240 mm Izdymdh band length 450 mm cutting lenght max. 750 mm cutting range - square - 240 x 240 mm cutting range - flat - 260 x 180 mm dimensions of saw-blade 450 x 40 x 2 mm total power requirement 3,7 kW weight of the machine ca. 1,1 t - partly overhauled - acc.: 1 sawframe as spare part, various saw blades, coolant more
9

Automatic cold saw SIMEC MEC 120BM 1LCN

Haaksbergen, NetherlandsNetherlands
6345 km
2004
ready for operation (used)
SIMEC MEC 120BM 1LCN Automatic cold saw for high volume production cutting Blade diameter: 250 / 350 mm Ccskufx Angle range: +/- 60 degrees min. cut capacity : 12 mm round cut capacity : max 100 mm Max cut Lenth 3000 mm Feeder 6000 mm plus more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Dmjlzo2 VOORWOOD A117B Shape And SandFeed through, single-sided Profile Shaper/Sander with CPU readout; feeds from right-to-left;. Specifications: -- 2-3/4" x 2-3/4" Min. part size, 3/8" - 1-1/2" max. thickness, and 1-3/4" max. profile faceEquipped with: -- (3) 5 HP Belt driven Shaping station -- (4) 1 HP - 1,500 RPM Disc sanding stations; 0° - 45° tilting on all units. -- 18 FPM Fixed feed speed, 1 HP feed drive; overhead holddown with (2) rows of t... more
4

Bar Automatic Lathe - Single Spindle INDEX C29

More Index C 29
Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
1976
used
spindle passage - mm turning length - mm Bcy8m3o9kd bore depth - mm Accessories: Turning sets, various tool holders, collets, feed pliers more
3
grinding diameter 12 mm grinding length 150 mm workpiece length 200 mm lip angle 0 - 180 ° relief angle 0 - 60 ° grinding wheel speeds 5000 U/min power capacity 0,25 kW weight of the machine ca. 0,03 t Yrkhr8 dimensions of the machine ca. 0,40 x 0,30 x 0,30 m K111 with engraving cutter (equipment01) Engraving cutters with profiles 1-15 made of HSS or carbide, small turning slicer or push chisel, as well as similar tools such as pointed drill, can be exactly grind or sharpen with this equipme... more
3
cutting diameter 500 mm capacity 90 degrees: square 500 x 500 mm saw band length 6900 mm dimensions of saw-band 6900 x 38 x 1,3 mm feed length 600 mm feed length: multiple bis 5999 mm cutting speed 18 - 90 m/min height of material-table 700 mm total power requirement 5,0 kW Uqvtq8nz9 weight of the machine ca. 4,0 t dimensions of the machine ca. 3,70 x 2,30 x 2,20 m Accessories: coolant - 2-column-guided - more


automatic ...
daily

New machines via email!

Stay updated!

to

to

Edit search
AUTOMATIC GRINDER
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close