Belt conveyer buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
4
VIRGINIO horizontal conveyer belt Bccwel0cie Size: mm. 300(w)x 1500 (l) Side walls height 70 mm. PVC 2 belts x 3 mm. 0,13 kW motor Siemens magnetothermic switch Machine hardly ever used more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Bcbeqqblbu SCM SANDYA 10-S Wide Belt Sander (2) Heads43" Width cap. Drum, Combination Head. Suitable for veneer & lacquer sanding, as well as solid [...] Configuration1st Head: Steel contact roller 160 mm (6,3"), spirally grooved. 20 HP motor2nd Head: Combination head contact roller rubber, spirally grooved - finishing platen with electronic sectional pad with EPICS-system 18 HP motor. This system ensures maximum sensitivity and precision for sanding panels ... more
6
Technical data feeding conveyor, underfloor, position 12 Manufacturer Bollegraaf Typ HBT 1200/1600 Year of construction 1998 Driving motor 5,5 kW Length feeding conveyor 9,440 mm Effecting width 1,550 mm Height of side wall feeding conv. 550 mm Transport dimensions over all approx. 9,600 x 2,300 x 1,500 mm (L x B x H) Weight approx. 5,000 kg Technical data elevating conveyor with goose neck, position 15 Manufacturer Bollegraaf Typ HBT 1200/1600 Year of construction 1998 Driving motor 5,5 ... more
4
length in total 20584 mm band width 225 mm conveying height 3030 mm 17000 mm total power requirement 2 KW weight of the machine ca. 9 t Conveyor with 4 horizontal elements (each 4100 mm long) and one vertical element. Conveyor has a level sensor and a pump for water. Conveyor could be Bccqu0vqrx reduced in length to 4700 mm, 8800 mm or 12900 mm. more
5

drum belt sander Dankert

Egenhofen / Herrnzell, GermanyGermany dealership location
6816 km
good (used)
Type:  used machine working width: 1000 mm 2 grinding units Year of construction:  7j7z7r9vu location: Warehouse / 82281 Herrnzell more
1

conveying belt DURA DRIVE PLUS

Norderstedt, GermanyGermany dealership location
6479 km
1995
used
working range 230 mm width of band 230 mm height 950 mm Uct2mqee2 more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Bculrcanvj SCMI SANDYA 3S Wide Belt Sander (2) Heads43" Width cap, Drum, Combination HeadHead Configuration:1st Head: Steel contact roll, 4" diameter.2nd Head: Combination head, rubber covered contact roll, 4" dia. and 2" wide finishing [...]: --30 HP main motor driving both heads -- Air jump platen with timers to control raise-and-lower of platen on leading and trailing panel edge. -- 43" X 75" Belt size with electronic tracking and pneumatic belt tens... more
6
Manufacturer BOA Typ 1700 HSB KTH Year of construction 2002, overhauled in 2017 Driving motor 5,5 kW Length feeding conveyor 4,000 mm overall Length elevating conveyor 14,000 mm Length goose neck 1,530 mm Grade 30 ° Effecting width 1,700 mm Dimensions feed hopper Inside dimensions 1,920 x 1,090 x 3,100 mm (w x d x h) Outside dimensions 2,100 x 1,700 x 3,100 mm (w x d x h) D89vefed Comments: The conveyor belt and hopper were completely overhauled. The frame construction and side walls as well ... more


belt conve...
daily

New machines via email!

Stay updated!
3
working width: 1350 mm grinding belt width: 1370 mm grinding belt length: 1900 mm Blank length left to right: 6100 kg Pressure total: 63 kVA Dimensions L x W x H: 2700 x 3100 x 2100 mm Ndjd2 more
6

Long belt sander Johannsen T93

Herrnzell 6, 82281 Egenhofen / Herrnzell, DEGermany
6816 km
1993
good (used)
Type: T95 H2kq8ud Used Machine table size: 2700mm x 800mm ElectricTable stroke clockwise and anticlockwise rotation motor power: 4 kW Year of construction: 1993 location: Warehouse / 82281 Herrnzell more
1

conveying belt MIRACON

Norderstedt, GermanyGermany dealership location
6479 km
2005
used
working range 200 mm width of band 200 mm Uct2wbjy3 height 900 mm more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Glqwr3ata 2-Head, 37" width cap. - 1st Head: Rubber covered contact roll, 6-1/4" Dia. (80-Shore), 20 HP motor. -- 2nd Head: Combination head with 6-1/4" dia. rubber covered contact roll 50-Shore) and 3-1/8" wide "air inflatable/cushioned" finishing platen, 15 HP motor. -- Abrasive belt size 37" x 75", with air tensioning & electronic abrasive belt tracking, conveyor belt feed with 1 HP variable feed drive, 9 - 45 FPM feed speed with inverter, infeed & ou... more
6
Manufacturer Bollegraaf Typ HBT 600/2000 x 21,986 Year of contruction 2000 (overhauled 2017) Drive power 7,5 kW Length infeed conveyor over all 6,723 mm Length module infeed conveyor 5,500 mm Height infeed conveyor over all 1,300 mm Height side wall infeed conveyor 500 mm Length elevating conveyor over all 13,923 mm Lenght module elevating conveyor 13,300 mm Height side wall elevating conveyor 800 mm Gradient of elevating conveyor 30° Length gooseneck 1,340 mm Lenght module gooseneck 1,000 Slope... more
4
8l8unmp2e more
1
Length of roller conveyors - infeed:22.000 mm Length of roller conveyors - outfeed:17.000 mm Numbers of cross transfers: Stck. Ncrj9 Transport system consisting of several roller conveyer segments with different lengths. 1 segment with the length 4500 mm 1 segment with the length 1900 mm 3 segments each with a length of 4300 mm 2 segments with a length of 2000 mm each 1 segment with the length 1400 mm 1 segment with the length 2400 mm 1 segment with the length 2600 mm The total width of all s... more
6

Long belt sander Johannsen T82 pneuma

Egenhofen / Herrnzell, GermanyGermany dealership location
6816 km
1980
good (used)
Type: T82pneuma Used Machine G0t29gtwi table size: 2800mm x 1250mm power: 5,5 kW Year of construction: 1980 location: Warehouse / 82281 Herrnzell more
4

Linishers BEMA MSB 89mm Horizontal Belt Linisher

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Serial No. 7017 Bcieytjw8d Capacity 3.1/2" / 89mm Belt width 3.1/2" / 89mm Input 415/3/50 ac 3 kW Fitted with Push Button Starter Length 3'4" / 1.02m Width 2'2" / 660mm Height 3'6" / 1.07m more
1
Elect./Voltage: 600 V, 60 Cy, 3 Ph. Bbuuef3awf SCM "SANDYA-CL CCS-110" Dual Head Wide Belt Sander; 2-Head, 42" width capacity. For Veneer or Solid wood sanding with (1) Contact roll and (1) finishing platen. -- First Head: Rubber covered contact roll 11-1/2" Dia., 36 HP motor. -- 2nd Head: Combination head with rubber covered contact roll and 3-1/2' wide finishing platen with jump control, 18 HP motor. -- Platen is controlled with sensors and timers to drop down on leading edges & retract ... more
6
Pos. 30 Ballistic separator Manufacturer Stadler Type BS 2150-06-04-131 Year of manufacture 2007 Use as PPK separator Throughput capacity up to 12 tons/h Equipped with 6 pcs. oscillating paddle 6,200 mm long Drive power 5,5 kW Dimensions ballistic separator 6,160 x 2,450 x 1,550 mm (l x w x h) Weight approx. 3 tons Dimensions steel construction 9,300 x 6,600 x 4,200 mm (l x w x h) Pos. 50 Fine grain belt underneath the ballistic separator Manufacturer Stadler Type sliding belt conveyor Centre ... more
5

V-belt pulley unbekannt Triplex 1 1/4" x 3/4"

Wiefelstede, GermanyGermany dealership location
6385 km
used
8gwb3zebp more
13
CATALOG NUMBER 5046 TECHNICAL DATA max width of the workpiece 1100mm max. workpiece height 140mm   *in advance: 2 metal rollers, sliding + grooved rubber roller + shoe + metal roller, sliding + metal roller, sliding + cleaning brush +   *from down: 2 rollers introducing rubber, sliding + towing tape + Gvopng   oscillation of pneumatic straps on photocells + raising the electric table + 2 feed speeds + air brake + total power 17.5 kW working pressure 6-8bar Diameter of... more
6

wide belt sander SCM UNO CS 95

Egenhofen / Herrnzell, GermanyGermany
6816 km
2000
ready for operation (used)
Type: UNO CS 95 used machine working width: 950 mm combi unit contact roller steel Bcxmso3mk7 sanding pad manual Year of construction: 2000 location: Warehouse / 82281 Herrnzell more
6

Wide-belt sander TORNADO SPB CINDY 400C

Heule, BelgiumBelgium dealership location
6178 km
2006
used
1 combi-unit (contact roller and path) sanding width: 430 mm Bb8283zywg dimensions of sanding belt: 1900 x 430 mm motor of sanding belt: 6,5 kW, 2950 t/min transportbelt, 2 speed height adaptable with motor, table: fixed height more
1
Elect./Voltage: 600 V, 60 Cy, 3 Ph. Nccf7 TIMESAVERS 137-2HD Double Head, 36" wide belt sander. --2-Head, 36" width cap. - 1st Head: 6" Dia. rubber covered contact roll, 25 HP motor; -- 2nd Head: 2-1/2" Wide finishing platen, 15 HP [...] Size/Features: -- 37" x 60" (to be confirmed)Abrasive belts, "Posi-Trak" electronic tracking & pneumatic tensioning, 15 - 45 FPM variable feed speed. ÷Equipped with: -- Double infeed & outfeed spring loaded holddown rolls, 0" - 8" max. manual part thic... more
6
Manufacturer BOA D83vym2z Typ PCS 6000 Year of construction 2003 Hours of operation 10,210 h Dimensions separation bed inside 6,000 x 1,765 mm (L x W) Dimensions separating bed outside without motor 6,750 x 2,435 mm (l x w) Drive power 4 kW Transport speed 25 - 67 rpm. Frequency control 25 to 67 Hz Tilt angle 67 ° Number of axles 12 pieces Number of plastic discs per axis 17 to 18 pieces Accessories: 1 piece feeding conveyor to the TCS 6000 1 piece discharge conveyor for the paper 1 piece conve... more
4

V-belt pulley unbekannt Duplex 1 1/2" x 1"

Wiefelstede, GermanyGermany dealership location
6385 km
used
8gwcgkjvq more
10
Mahros RPN6 / SP conveyor belt 460 x 20 x70 cm Belt conveyor Three-phase current 0.37 kW; Cppoglaw Mahros belt conveyor Dimensions conveyor: 460cm x 20cm / height: 70cm Total length: 465 cm Total width: 27 cm / foot 45 cm with geared motor Technical specifications: Power: 0.37 kW Three-phase current 380 V (optional alternating current possible) Engine speed: 1350 rpm - USED ​​GOODS - very good condition More articles - new and used - can be foun... more
6

Belt conveyors LKOREMAN Förderbanden ("12)

NS Maastricht, NetherlandsNetherlands dealership location
6337 km
ready for operation (used)
2 conveyor bands Brand: LKOREMAN, built in 2012 1 x: A.A. length: 18500 mm band width: 650 mm Power requirement: 4 kW AufsteckGetriebe speed: 1 m/s. 1 x: A.A. length: 13500 mm band width: 650 mm Power requirement: 3 kW AufsteckGetriebe speed: 1.5 m/s. Hil0t8pmq more
6
Useful width: 1300 mm Panel thickness: 3 - 80 mm Bbqtk0hxca 1 x wide belt with segmented pad, belt sizes 2620 x 1350 mm, belt speed 0,5 - 20 m/s, motor 22 kW 1 x wide belt with segmented pad, belt sizes 2620 x 1350 mm, belt speed 0,5 - 20 m/s, motor 22 kW 1 x brush, diameter 150 mm, fibres, motor 1,5 kW 1 x EA dust cleaning machine, roller transport, high speed air cleaning with ionisation removing electrostatic dust Operational side at the right feed speed 8 - 40 m/min Fixed working height 880... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbuuatn7fz TIMESAVERS 2321-45-01 Wide Belt Sander2-Head, 51" width cap. with (1) contact roll, and (1) combination head with contact roll and finishing platen. -- 1st Head: Rubber covered contact roll, 8" dia., 30 HP motor. -- 2nd Head: Combination head with a rubber covered contact roll 5-1/2" dia. and 2-1/2" wide segmented finishing platen, 25 HP motor, (2) dial indicators for contact roll height adjustment. -- 52" x 103" Abrasive belts, "Posi-Trak" el... more
6
Overview technical data paper sorting line Manufacturer Bollegraaf Year of construction 1999 Throughput rate 3 up to 6 tons/h, depending on material Installation dimensions 10,000 x 19,000 x 8,000 mm (l x w x h) Sorting cabin 6,500 x 4,900 x 3,150 mm (l x w x h), 4 sorting places, 6 disposal chutes, 4 bunker belts 1 piece feeding belt to the sorting line HBT 600-800 * 14.006 mm ? 30° 1 piece sorting belt HBGT 800 * 15,000 mm ? 10° -0° 4 pieces bunker belts HBT 800 /1,000 * 10,940 mm Comments:... more
6

Belt conveyors Förderband LKOREMAN ("10)

NS Maastricht, NetherlandsNetherlands dealership location
6337 km
ready for operation (used)
Conveyor belt brand: LKOREMAN A.A. length: 17 m Ptrbbq Band width: 1800 mm AntriebsRolle Ø 520 mm UmlenkRolle Ø 420 mm Power requirement: Bahle AufsteckGetriebe 11 kW speed about 1 m/sec. more
6

Wide-belt sander SAC RT1 1100

Egenhofen / Herrnzell, GermanyGermany dealership location
6816 km
1995
good (used)
Wide belt sander SAC Type: RT1 1100 Second-hand machine Working width: 1100 mm Combi unit How to contact with roller 80 ° shore Usage-driven air - sanding pad Sanding belt dimensions: 2200 mm x 1130 mm Sanding belt 2 speeds 8qpixa2io Feed: 2 levels Power consumption: approx. 13kW Year of construction: 1995 Location: Camp / 82281 Herrnzell more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Juzxye TIMEAVERS 4-Head, 51" cap. Sander.. --Great sander for solid wood and veneer panels equipper with (2) Contact rolls and (2) Air platens. 1st Head: Rubber covered contact roll, 9-1/2" dia. 60-70 Durometer, 40 HP motor. -- 2nd Head: Rubber covered contact roll, 9-1/2" dia. 50-60 Durometer, 30 HP Motor. -- 3rd & 4th Heads: Finishing platens, 2-1/2" wide "Veneer Saver" inflateable platens with adjustable timers for leading and trailing edges, 20 HPm... more
6

Baler 78,5 tons with chain belt conveyor BOA [...]

Scheemda, NetherlandsNetherlands dealership location
6317 km
2002
used
Manufacturer BOA Type [...] Year of construction 2002 Press power main press 78,5 tons Press power of pre-presses 41,7 / 47,2 to Feed channel 1,620 x 1,080 mm (l x w) Capacity per cycle time 2,5 cbm Bale size 1,100 x 800 mm (w x h) length adjustable Driving motor 55 kW Connected load 80 kW Tying system 4-fold vertical, 2-fold horizontal, fully automated Bale weight approx. 500 up to 600 kg Bcv7gnpa98 Weight approx 18 tons Comments: Inspections are possible after agreement. We will not assume ... more

Conveyor belt Unknown FU3500-400

Pegnitz, GermanyGermany dealership location
6765 km
used
Belt width:400 mm Belt length:3600 mm Total belt loading: kg height adjustment: mm electrics - voltage/frequency:380/50 V/Hz engine output:0,12 kW Bcc0ehcpzr weight: kg dimensions:3,6 x 0,48 x 1,08 m - including frame - Payment: 100% prior to delivery more
5
2 x Z-bands with link belt Bcucq29nlc Dimensions: Usable width: 300 mm Gallery height: 10 mm Total width: 470 mm Frame: 670 mm Funnel height: 300 mm more
1

WIDE BELT (2-HEAD 53") COSTA SA TS 1350

North Carolina, United StatesUnited States dealership location
518 km
2001
used
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Nccid COSTA SA TS 1350 Wide Belt Sander;Specifications: -- 53" COSTA equipped with (1) Segmented head + (1) Brush cleaning head. -- 1st Head: (1) Veneer platen with variable pressure; 32 mm segmented sensing pads; variable frequency drive for infinitely variable speed control of abrasive belt sanding speed. -- Belt size 53" x 103" with air abrasive belt cleaning. -- 2nd Head: Approx. 6" dia. panel cleaning brush, de-ionizing bar for static discharge,... more
1

Belt conveyor Gummitransportban NN 7290

Petershagen, GermanyGermany dealership location
6478 km
2004
used
Manufacturer: Nölle + Nordhorn, Type: NN 7290, Year: 2004, Working length mm: 2980, Working widht mm: 900, Total hight mm: 860, Feeding speed adjustable: yes, Year :2004 Bbdkxbo77h more
10
Abrasive belt machine of Linden machines Sandingmaster SCSB2-1100 1 piece: Year 1991, BRA 1,373, grinding width of 1, 1 m, incl. suction Weidmann, factory No. 1857, 2.041 m ³/h, 3 HP Gcxedof Item number: 000047372 location: 84155 bodenkirchen more
6
STAHL PLATTENBAND MULDENBANDSTRAHLANLAGE MIT BESCHICKER + FILTER+ MANGETABSCHEIDER STEEL BELT SHOT BLASTING WITH LOADER + FILTER MAGNET SEPERATOR Bezeichnung: Stahl Platten Muldenband Strahlanlage Hersteller: OMSG Typ: SG/4 NEH Bandausfuehrung: Stahlband Fuellvolumen max.: 400 Liter Charge max. kg: 800kg Stahl/Guss Schleuderraeder: 2 Stueck Max. Einezlgewicht: 20 kg Mulden ø: 1.000mm Muldenbandbreite: 1.200mm Bestehend aus: - Hydraulischer Beschicker W0o9a3krm - Muldenbandstr... more
15
CATALOG NUMBER 5025 TECHNICAL DATA max. width of the workpiece 950mm max. workpiece height 140mm 2 aggregates: + 1) grooved rubber roller for calibration + 2) rubber roller with a shoe +   *in advance: slip rubber roll + aggregate + slip rubber roll + aggregate with boot + rubber slipping roll +   *from down: 2 rubber rollers, sliding + towing tape + 2 rubber rollers, sliding +   oscillation of pneumatic + straps planing thickness potentiometer + 2 types of feed speed ... more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Cw72pumg COSTA KA CCT 1350 3-Head Sander: 52" width cap. and constant pass line conveyor height;Excellent Veneer and Solid wood sander with (2) Contact rolls and (1) Segmented [...] Configuration: -- 1st Head: Rubber covered contact roll, 9-7/8" dia., 35 HP motor. -- 2nd Head: Rubber covered contact roll, 9-7/8" dia. approx. 40 shore covering, 30 HP motor; -- 3rd Head: Segmented finishing platen, electronically controlled narrow segments conform to pan... more


belt conve...
daily

New machines via email!

Stay updated!

to

to

Edit search
BELT CONVEYER
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close