Beveler buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Bbu3nnspz9 HOLZ-HER Sprint 1310-1 Single Sided Edgebander. Cartridge Glue System (1906), 8 mm edge thickness cap., Automatic magazine coil & strips (1903), 3 mm PVC cap. pneumatic guillotine for coil [...]: -- Double motor end trim (1918), chamfers 0° - 10°(0.22 kW - 9,000 RPM motor ea.). -- Universal Top & Bottom Trim (1942) for bevels from 0°- 15°, allows simultaneous bevel & profile trimming (1 HP - 22,000 RPM motor ea.); trim motors are 0.6 kW HF - 30... more
6
Homag Panel Sizing & Edgebanding Machine, KF 26/07/A3/25 Make : Homag Model : KF 26/07/A3/25 Serial# : 0-200-03-0005 Year of Mfg. : 2002 Condition : Used, very good conditions Was installed in the USA, Plant stopped working in late 2008-2009, low working hours! Purchased and packed in 2009, stored in in the US till now! Full Tech. Details and Documentation available upon request DESCRIPTION Fixed side on left, movable side on right. Double-Sided mac... more
6

Bevel Gear Generator Klingelnberg C27

Novi, United StatesUnited States dealership location
624 km
2004
used
Control: SINUMERIK 840 D Max. Wheel dia 270 mm Max. Module 6.5 Min. Module 1.5 Gear width 58 mm Max. Helix angle 60 deg Number of Teeth 6 - 180 Bbdtdirfjl Milling Head dia. 39 - 105 mm Milling Head speeds 1500 rpm Workpiece spindle speeds 1500 rpm Total Power requirement 40 kW Weight of Machine ca. 11,2 t Space requirement ca. 3,70 x 2,10 x 2,10 m more
2
max. wheel diameter 850 mm gear width 130 mm max. module 13 min. module 7 min. wheel diameter 50 mm axis adjustment +/- 1 - 120 mm milling head speed 15 - 134 U/min ratio of transmission 1:1 - 1:10 distance spindle nose and table 160 - 710 mm no. of teeth to be hobbed 5 - 100 mm Bamesfm2c9 min/max. pitch cone angle 0 - 90 ° spiral angle 0 - 30 ° total power requirement kW weight of the machine ca. 20 t Cyclo Palloid Bevel gear Machine The machine could be sold also with two cutting he... more
5

Bevellers SMT PULLMAX X93 Beveller. 3mm - 50mm Capacity

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Capacity 3mm Minimum - 50mm Maximum G9cc0hy7o Angle range 25 Degrees-55 Degrees Input 415/3/50 ac 4 kW Support roll rise & fall 50mm Fitted with 1 x Cutter Length 4'6" / 1.37m Width 3'6" / 1.07m Height 5'2" / 1.57m Nett weight actual 1 ton / 1016 kgs more
1
Elect./Voltage: 220 V, 60 Cy, 1 Ph Bbu3qm8icj CEHISA BRYKO, Single Sided Edgebander0.4 - 2 mm Edge thickness cap. and 40 mm panel thickness; 3" min. width and 4-3/4" min. panel [...] with: -- Quick Melt Teflon coated glue pot for granular hot-melt adhesive. -- Heavy Duty guillotine for up to 2 mm thick [...]: -- Integrated Operator PLC controls for (10) programs, "short-cut" function keys and an LCD [...]: -- Double Blade End Trim with HF motor - 12,000 RPM. -- Top & Bottom Flush/Bevel T... more
5
max. wheel diameter 275 mm gear width mm max. module 6 min. module 1,5 Control Sinumerik 840C Ndktl tooth width 5,5 mm spiral angle 0 / 60 ° max. number of teeth 120 min. number of teeth 5 transmission ratio max. 1:10 transmission ratio min. 1:1 spindle speeds max. 110 mm blade head turning speeds 20-110 U/min total power requirement 100 kW weight of the machine ca. 16,7 t dimensions of the machine ca. 5,2 x 2,3 x 2,4 m more
1

Biesse u

Petershagen, GermanyGermany dealership location
6478 km
used
Manufacturer: Biesse Bohrgetriebe, Special bore gearbox: yes, Stück Bohrgetriebe : 2, Number of drilling spindles: 8, Grid 32 mm: yes, Bevel gear: yes, Aluminium design: yes, Driven centrally: yes, Quick-change lining: yes, Price per unit Euro: 300, Bnyrkwos more


beveler
daily

New machines via email!

Stay updated!
6
max. wheel diameter 180 mm gear width 60 mm max. module 8 / 10 min. module 1,5 tooth length max. 16 mm no. of teeth Segment 6 no. of teeth Vollrundung 6-30 pivoting angle 0 - 10 ° inserted tooth milling cutter dia. 600 mm cutting speed Frässpindel 48-78 m/min root circle dia. min. 50 mm electrics - voltage/frequency 380 / 50 V/Hz total power requirement 16 kW weight of the machine ca. 7,6 t Bbxlmcda07 Segmental Gear Generating Machine - specifically for rational production of t... more
5

Bevellers GULLCO GBM-28 8mm - 50mmBevelling Machine

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Serial No. C6UK0903 Maximum material thickness 50 mm, minimum 8 mm Angle range 30 degrees Input 415/3/50 Equipment mounted on wheeled trolley. Length 4'4" Width 2'6" Height 4'6" Nett weight actual. 400 Kgs./0.39 Tons Bcif9lcskf more
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Bbu3nebkf8 HOLZ-HER Sprint 1310-1 Edgebander. Cartridge Glue System (1906), 8 mm edge thickness cap., Automatic magazine coil & strips (1903), 3 mm PVC cap. pneumatic guillotine for coil [...]: -- Double motor end trim (1918), chamfers 0° - 10°(0.22 kW - 9,000 RPM motor ea.). -- Universal Top & Bottom Trim (1942) for bevels from 0°- 15°, allows simultaneous bevel & profile trimming (1 HP - 22,000 RPM motor ea.); trim motors are 0.6 kW HF - 300 Hz. -- To... more
6
max. wheel diameter 270 mm gear width mm max. module 6,5 min. module 1,5 Control Sinumerik 840 D tooth width 58 mm spiral angle 0 - 60 ° max. number of teeth 180 min. number of teeth 6 transmission ratio min. 1:1 Nfexv transmission ratio max. 1:10 blade cutter head diameter 39-105 mm blade head turning speeds 1500 U/min spindle speeds 1500 U/min total power requirement 40 kW weight of the machine ca. 11,2 t dimensions of the machine ca. 3,7 x 2,1 x 2,1 m Loading system Promot Deburri... more
2
plate thickness 50 mm bevelling-angle 35 Grad sheet thickness - max. bis 50 mm bevelling-depth in steel 40 kg/m² 13 mm bevelling-depth VA-steel 10 mm engine output 1,5 kW weight of the machine ca. 400 kg dimensions of the machine ca. 0,75 x 0,8 x 1,3 m Electric 380 Volt Machine works 13 mm bevelling, if the plate is no bigger than 40 kp/mm2. bevelling-angle is fixed and constant at 35 degree. 9h2x8rkd7 Machine dealer with own stock of 2500 m² and certification of the database "Machineseeke... more
5

Bevel Gear Grinding Machine GLEASON PHOENIX 200 HG

Staufenberg, GermanyGermany dealership location
6540 km
2002
used
max. wheel diameter:215 mm gear width:40.65 mm max. module: Largest Speed Ratio:1:10 x-axis:(horizontal) -152 to 102 mm y-axis:(vertical) -102 to 178 mm z-axis:Sliding Base Travel 2" to 12" (51 to 304mm) mm b-axis:3 - 90 ° max. distance machine center to spindle slide:115 mm max. nos. of teeth:5 - 200 ( inclusive ) St. workpiece external diameter max.:215 mm tooth profile - width x height:16 x 40,65 mm grinding wheel diameter:51 -190 mm Yrntl8 grinding wheel turining speeds:1000 - 6000 1... more
1

EDGE BANDER machine BIMATIC B250 IR-SPI

MARIANO COMENSE, ItalyItaly
6817 km
ready for operation (used)
AUTOMATIC EDGE BANDING MACHINE Type BIMATIC B250 IR-SPI composition : - glue pot - end-trimming unit Bcvu9sb83m - edge-trimming unit - bevel-trimming unit volt. 380/50 more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Dgkvkex HOLZ-HER SPRINT 1310-1 Edgebander (4 Stations). Cartridge Glue System (1906), 8 mm edge thickness cap., Automatic magazine coil & strips (1903), 3 mm PVC cap. pneumatic guillotine for coil [...]: -- Double motor end trim (1918), chamfers 0° - 10°(0.22 kW - 9,000 RPM motor ea.). -- Universal Top & Bottom Trim (1942) for bevels from 0°- 15°, allows simultaneous bevel & profile trimming (1 HP - 22,000 RPM motor ea.); trim motors are 0.6 kW HF - 300 H... more
6
max. wheel diameter 275 mm gear width mm max. module 6 min. module 1.5 max. workpiece diameter 275 mm tooth width max. 5.5 mm spiral angle 0 - 60 ° number of teeth 5 - 120 transmission ratio min. 1:1 transmission ratio max. 1:10 milling drive motor 20 kW workpiece drive 14.5 kW total power requirement 62 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,7 x 4,387 x 2,45 m Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 [...] Tool positioning axis... more
6
x-travel 300 mm y-travel 150 mm z-travel 340 mm turning speeds 2800 U/min total power requirement 1,4 kW weight of the machine ca. ca. 0,5 t dimensions of the machine ca. 1,2x1,6x1,7 m Yuvt9h2pn Spiral bevel-dividing head Horizontal-anvil Dividing long countertip [...]: R -28 998, overhauled a few years ago 3 box accessories, collets, arbors, etc. more
5
max. wheel diameter:130 mm gear width: mm max. module:3 min. module: total power requirement:15 kW weight of the machine ca.:6 t dimensions of the machine ca.:2,3 x 2,5 x 2,17 m Nxrkflh2 A well-preserved CNC hobbing machine Vertical for shafts and wheels With tailstock Also suitable for hard milling (good for steering pinion) Rapid traverse radial, axial: 10.000 mm/min Rapid traverse tangential: 7.500 mm/min Max. wheel diameter 130 mm Max. module 3 mm Tangential slide travel 200 mm Rad... more
6

Single side edge bander Ott M259

Petershagen, GermanyGermany dealership location
6478 km
1994
used
Manufacturer: OTT, Type: M259, Year: 1994, Program: Ott, Min-max edge material mm: 0,5-3, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-60, Edgeband height max mm: 50, Min-max feed m/min: 8-24, Coil magazine: yes, Strip magazin: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes steuerbar, radius milling: yes steuerbar, 4 motors: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, 4 motors: yes, Bonding part... more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Bbu3pz230h CEHISA EP-9 Single Sided Edgebander0.4 - 6 mm Banding capacity, automatic strip feed & coil feed magazine, compact Hot Melt glue system, heats up in (12) [...]: 3 mm PVC Guillotine, 3-roll pressure section w/pneumatic positioning; min. panel length 5" (120 mm), min. panel width 3" (75 mm), max/min panel thickness .375" - 2" (8 - 45 mm).Workstations: -- Single-motor end trim with (2) blades. -- Top & Bottom flush & bevel trim unit with 0° to 20... more
3

Adjusting Instrument KLINGELNBERG PEM 135

Monheim, GermanyGermany dealership location
6405 km
1980
used
longitudinal travel 200 mm cross travel 250 mm Mqp2r table length 250 mm inserted tooth milling cutter dia. 500 mm table diameter 400 mm table height over floor 900 mm total power requirement 0,5 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,2 x 1,2 x 1,5 m Setting Device for Bevel Gear Cutter Heads with : Heidenhain 3 x digital readout for vertical and cross adjustment Displys for flutes. Printer, hydraulic table clamping Incorporated indexing plates for 5 divisions The... more
1

Shears / cutting equipment Pullmax Sweden X 97

Babberich, NetherlandsNetherlands dealership location
6320 km
1997
ready for operation (used)
Technical shear / laser / PlasmatischSheet bevelling machine Blechstärke3 - 50 mm AusladungAngle 25 - 55 GR mm Leistungresonator4 1400 mm Nec27 ... more
2

"Profiled end mill" HAPRO INTERCUT

Klipphausen, GermanyGermany dealership location
6821 km
2005
used
"Profiled end mill HAPRO INTERCUT Cutting width mm: 40 Outer diameter mm: 100 U3cno End mill: Yes Workpiece feed: mechanical Cutters: HMWPL Weight kg: 2" more
6

Single side edge bander Homag FKR 78/C/A/S3

Petershagen, GermanyGermany dealership location
6478 km
used
Manufacturer: Homag, Type: FKR 78/C/A/S3, Monting of the machine: zerspanerteil zum Einkürzen, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 10-40, Min-max feed m/min: ca.18, Infeed table: yes, Premilling: yes, Fine milling: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius scraper: yes, Flat scraper: yes, Bonding part EVA: yes, Work piece refeeding: Bargstedt, Roller/belt: Riemen,... more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Bbu3qdncoi CEHISA BRYKO PLUS, ..."Compact" Edgebander. 0.4 - 2 mm Edge thickness cap. and 40 mm panel thickness; 3" min. width and 4-3/4" min. panel length. -- Equipped with: Quick Melt Teflon coated glue pot for granular hot-melt adhesive; Heavy Duty guillotine for up to 2 mm thick PVC. -- Features integrated Operator PLC controls for (10) programs, "short-cut" function keys and a LCD [...]: -- Double Blade End Trim with HF motor - 12,000 RPM; Top & b... more
9
with bevel cutting head 50° (5-axis NC controlled); control system “MicroStep” type iMSNC, 1 standalone control panel, 2 digital control panels MSNC RO2; cabinet with various a.o. nozzles; (plasma power unit and 2 control cabinetslocated at 1st floor) (incl. new support strips for table) Bcypqbvvyd more
15

Shears / cutting equipment Pullmax Sweden X 93

Babberich, NetherlandsNetherlands dealership location
6320 km
1990
ready for operation (used)
Technical plate shear / laser / Plasmatischangle Blechstärke3 - 50 mm Max cutting height / rotation ° angle 25-55 GR Leistungresonator4 1400 mm ... more
5
"Accessories, toolholders and clamps for CNC OERTLI PROFILFRÄSER Cutting width mm: 46 Outer diameter mm: 104 Workpiece feed: mechanical Mx09t Cutters: HMWPL Weight kg: 6" more
6
Manufacturer: Homag, Type: KAL 310/7/A20/S3 , Year: 2011, Control: PC 22, Software: Windows XP/Woodscout, Barcode: möglich, Min-max edge material mm: 0,3-3,0, Work piece width min-max mm: 12-60, Min.-max. workpiece height in mm: 12-60, Min-max feed m/min: 18, Axis control: einlauflineal, Infeed table: Servo, Servo Einschubtisch: yes, mit Vakuum: 2 X 3 kw, Profile milling: yes, Machining cracks: yes, Power per lamp: 2-fach, Laser technology: yes, kW Leistung Laser: yes, Coil magazine: HL 84, Stri... more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Glyz009gg CEHISA "EP-9" SINGLE SIDED EDGEBANDER0.4 - 6 mm Banding capacity, automatic strip feed & coil feed magazine, compact Hot Melt glue system, heats up in (12) [...] with: -- 3 mm PVC Guillotine, 3-roll pressure section w/pneumatic positioning; min. panel size: 4-3/4" Length x 3" width x 8 - 45 mm [...] Stations: Single-motor end trim with (2) blades -- Top & Bottom flush & bevel trim unit with 0° to 20° tilt (0.75 HP ea. motor). -- Top & bottom ... more
6
max. wheel diameter 400 mm max. module 8,5 min. module 1,5 gear width mm tooth width max 60 mm transmission ratio max. 1:1 - 1:10 spindle turning speed - stepless 50 - 233 U/min tiltable up to 30 Grad work piece spindle speed 10 - 337 U/min total power requirement 25 kW Gtq0is weight of the machine ca. 12,5 t dimensions of the machine ca. 4,3 x 4,0 x 2,7 m more
3
Soarer Dex S50 25480SR-SRABCF6 bevel gear shaft diameter: 16 mm or 20 mm, hole distance of the fixing holes: 100x130mm, new, 100% functional Neiat more
3
"Accessories, toolholders and clamps for CNC SCHMALZ INNOSPANN QUAD-BASE-R Ckiqzuug Weight kg: 4" more
6

Single side edge bander IMA Nowimat Concept

Petershagen, GermanyGermany dealership location
6478 km
2003
used
Manufacturer: IMA, Type: Nowimat Concept, Year: 2003, Control: Imawoop, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 65, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-55, Min-max feed m/min: 6-30, Axis control: yes, Einlauflineal gesteuert: no, Premilling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400 watt, Coil magazine: 6-fach, Strip magazin: no, Mitre stations: yes/8.42, Pre-milling: yes, Bevel milling: yes, Radiu... more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Bbu3m0qer7 HOLZ-HER SPRINT 1310-1 Edgebander (4 Stations). Cartridge Glue System (1906), 3 mm edge thickness cap., Automatic magazine coil & strips (1903), 3 mm PVC cap. pneumatic guillotine for coil [...]: -- Double motor end trim (1918), chamfers 0° - 10°(0.22 kW - 9,000 RPM motor ea.). -- Universal Top & Bottom Trim (1942) for bevels from 0°- 15°, allows simultaneous bevel & profile trimming (1 HP - 22,000 RPM motor ea.); trim motors are 0.6 kW HF - 30... more
3
involute control for spur gears 0,1 -20 Modul involute control for helical gears 0,1-35 Modul max. helix angle 90 ° gear diameter 0 - 1600 mm checking wheel weight - max. 4000 kg 832ezncuz tooth length - measurable without break 250 mm total power requirement 6 kW weight of the machine ca. 4,1 t more
4
SEW eurodrive KA57/T DV100L4/TF bevel geared motor, serial number according to the photo, good condition, 100% needed, functional, included with com. FotosACHTUNG: Please separately request costs for shipping and handling! ATTENTION: Please enquire for charges for packing and transport separately! Bcjg2ciamo more
max. wheel diameter 620 mm Bcs3hdljwr gear width 90 mm max. module 12 more
6
Manufacturer: Homag , Type: KAL 310/7/A3/S2, Year: 2006, Control: NC21, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 55/100, Min.-max. workpiece height in mm: 12 - 60, Edgeband height max mm: 60, Min-max feed m/min: 18, Axis control: Verleimteil/Druckzone/Formfräsen, Servo Einschubtisch: yes, mit Vakuum: 2x 3Kw, Profile milling: yes, Machining cracks: yes, Power per lamp: 2 Rollen, Coil magazine: HL 84, Strip magazin: 2 X0,55 kW, Min.-max. batten magazine mm: 2 X 0,4 kW, Mitre... more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Boaf9v0 HOLZ-HER 1321 Sprint Edgebander with Pre-Milling & Corner Rounding. 0.3 - 15 mm Thickness edgebanding capability (3 mm coil or 15 mm max. strip). -- 6 - 50 mm Panel thickness, workpiece width min. of 60 mm; workpiece Length min. 180 mm; Feed speed 12.5 MPM (41 FPM). -- Programmable Logic Control (PLC) for Edge feed, glue application, end trimming, flush trimming, radius trimming, scraping, corner rounding, and [...] can be easily created and recal... more
6
max. wheel diameter 275 mm gear width 150 mm max. module 6 min. module 1,5 total power requirement 62 kW weight of the machine ca. 12 t dimensions of the machine ca. 4,7x4,4x2,45 m max. wheel diameter mm gear width mm max. module 6 min. module 1.5 max. workpiece diameter 275 mm tooth width max. 5.5 mm spiral angle 0 - 60 ° number of teeth 5 - 120 transmission ratio min. 1:1 transmission ratio max. 1:10 milling drive motor 20 kW workpiece drive 14.5 kW total power requirement 62 kVA wei... more


beveler
daily

New machines via email!

Stay updated!

to

to

Edit search
BEVELER
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close