Charging system buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
5
Exakte Verwiegung. Die Chargieranlage besteht aus mehreren Hebe- und Kippvorrichtungen (Swing-Loadern) sowie einem Foerderband und einem Wiegesystem. Die Produkte aus Grossbehaeltern werden exakt verwogen, und dem Bediener der Anlage werden die Daten zur Zusammenstellung der Chargen auf dem Display angezeigt. So kann er die Übergabe der Teilmengen zur Gesamtcharge auf das Wiegetransportband steuern. Danach werden die Produktchargen ueber ein Transportsystem bzw. ueber Transportwagen den nachges... more
2
Charging capacity: 20-99999g, Beladeleistung: approx. 20g/s. Ms2rn more
1
Elect./Voltage: Mucjmc THERMAL FLUID SYSTEMS "KH 0.315/50" Hot Water Boiler, 1.26 Million BTU/Hour [...] & Description: -- Natural Gas 572° F max. temp.; 60 GPM rated flow, 57 GPM min. flow; Gas supply pressure of 5 - 7 PSI. -- MAXON Burner “400 OvenPack II”. -- HONEYWELL “UDC 3000 VERSA PRO” Universal Digital Controller. -- HONEYWELL “MODUTROL IV” Motors (#M7248). -- HONEYWELL Solid-state Spark Generator, high/low gas pressure switches, and flame... more
14
MACHINE DATA Cefla Spray System (Clear Sealer & Top Coat) easy2000+4 section stackable Oven + UV Dryer Make : CEFLA Model : Easy2000 Serial# : Year of Mfg. : 2004-2005 Condition : Good condition Was installed in the USA, Plant stopped working in late 2008-2009, low working hours! Purchased and packed in 2009, stored in a try Warehouse Facility in the US till now! DESCRIPTION Item 1: Timed Belt ... more
5
Construction winch, winch, winch -mechanical winch with planetary gear without drive diesel-hydraulic brake Pull approx. 20.000 kg -Trommel ø 500 mm rope diameter 24 mm -wrapping rope length 2 m x 28 m -2 x winches available Award pieces 1640/700/H700 dimensions mm Weight 1026 kg / piece Bbpo3jel more
2
Length of roller conveyors - infeed: mm Length of roller conveyors - outfeed: mm Tkgx2kk Numbers of cross transfers: Stck. more
6
 Start Chat

Furniture connector system invisible Lamello Invis

Langenfeld, GermanyGermany dealership location
6406 km
good (used)
Furniture connector system Lamello INVIS for invisible connections of furniture. Case with all tools required for processing and utensils. The screws are inserted through a rotating magnetic field, which is generated by a hand-held device. Thus, the furniture joints are not visible, but can be solved at any time. The pictured INVIS screws are also included in the price. The battery will charge itself, machine works, but due to the age you can no longer expect the full performance. Bumf... more
6
Guided laser for all surface applications Biq0ukuno Laser ablation, laser cleaning, insulation - the ROFIN laser switches are the ideal tools for these and other surface applications. THE USE Ideal for removing metallic coatings, edge insulation of solar cells, processing of flat screens, activation and cleaning of surfaces to paint and varnish removal Optical attenuator supports particularly fine and long-term parameter settings and optimizes e.g. the selective removal of layers ... more
1

BAGGING SYSTEM (COMPLETE, WOOD SHAVINGS) VERVILLE VP300

North Carolina, United StatesUnited States dealership location
518 km
used
Elect./Voltage: 208/220/440 V, 60 Cy, 3 Ph Bbuv3qkiac VERVILLE VP300 Compression Bagging System - CompleteThis system includes; -- Verville "VP300" 3-Station compression bagging system, complete with hydraulic system and controls -- High tubes of 96" -- Finish bag size 12" x 17" and up to 30" high -- Motorized screw feeding conveyor (between hopper and bagger) -- On side plastic bag sealer -- Some empty bags also available -- Dismantling and truck loading. more
9
Holzma Type HKL-11 Optimat, fully automatic High production angular sawing system MACHINE DATA: Gpymyhtck Make: Holzma Plattenaufteiltechnik GmbH Model: HKL11/43/22/16 Year of Mfg.: 2006 Serial No.: Main Machine HKL 11 0-241-15-3377 HOLZMA HAU-A 16/12 0-244-15-0684 HOLZMA HEE 38/16 0-243-15-2235 HOLZMA HEE 38/16 0-243-15-2487 HOLZMA HEE 38/16 0-243-15-3422 Condition: Used, in excellent conditions Was installed in the USA, Plant ... more


charging s...
daily

New machines via email!

Stay updated!
5
Wood, milling, milling tools, wood cutter, profile milling cutters -LEUCO quick clamping system -Außen saw blade ø 250 mm Nca08qbv Height 4 mm -Außen cutter Ø 238 mm Height 18 mm Recording ø 80 mm -1 x right -1 x left Price complete Weight 9.4 kg more
5
Numbers of cross transfers:12 Stck. Guiilw weight: kg weight of the machine ca.: t length roller conveyor:4300 mm width roller conveyor:230 mm heigth roller conveyor:600 mm engine output:2,2 kW Number of motors:2 Stk. Kaltenbach cross transfer table segments, chain drive system 4300 mm x 230mm x 600 mm, separate waves with coupling, 2 drive motors, each à 2,2 kW more
6

Compressed air system RENNER/ BOGE RS- 22/ DS6

Vellmar, GermanyGermany dealership location
6555 km
2003
good (used)
a used very well-preserved compressed air system consisting of a screw compressor RENNER RS-22 including cyclone separator with automatic. Condensate drainage Bquy8xt Air dryer BOGE DS60 Oil and water separator ÖWAMAT BEKO 5R Filter Parker ANK Zander 800 G13XP4E and G13XP4 Control to the dew point monitoring further technical data see PDF document. more
8

Drilling/Milling System Crea-Drill

Amsterdam, NetherlandsNetherlands dealership location
6220 km
ready for operation (used)
Hiqf8y more
1
Elect./Voltage: Bbuv3gzcmb VERVILLE FFS-3000 Loose Form-Fill and Seal Bagging System - (1) System:Fully automatic loose bagging system including (1) Verville "FFS-3000" Form-Fill and Seal Systems comprising of: -- (1) FFS-3000 Form-Fill and Seal -- Production capacity from 20 to 25 bags per minute per unit -- Bagged products; Peat Moss, Top Soil, Mulch, any type of free flowing products. -- Servo alignment of film base -- Touch screen with calibrated recipes -- Rapid production adjust... more
10
Compact camera system / intelligent compact vision system Manufacturer: Festo Type: SBOC-M / SBOC-M-R1B-H integrated components: Compact vision system SBOC-M-R1B-H -Zoom lens, focal length 10... 40 mm Tripod for camera and lighting Ethernet diagnostic cable Crossover patch cable System luminaire incl. plug 4 frames -Replacement, U - halogen lamp Trigger switch with extension cable Power supply camera/220Volt -CD-ROM with FCT configuration package and documentation -Systainer C... more
3
Wood, milling, milling tools, wood cutter, profile milling cutters -LEUCO quick clamping system -Außen ø 192 mm Height 55 mm -4 x recording available Award pieces Ihhfyzt Weight 9.4 kg more
5

Pipe profiling burning system Biber 3

Köln, GermanyGermany dealership location
6416 km
1997
used
total power requirement:2,0 kW weight of the machine ca.:0,5 t dimensions of the machine ca.:12 x 0,6 m Pipe-diameter on the chuck:20 - 200 mm Tube length:max. 6000 mm 00olvwep wall thickness max.:10 mm machine dimensions (length x width x height):2800 x 540 x 1620 mm cutting path speed:0.1 - 3.0 m/min. tube conveyor speed:0.1 - 5.0 m/min. track length of tube conveyor:250 mm length of cutting curve max.:250 mm Pipe cutting machine BIBER 3, including a 100 AMP Kjellberg plasma cutting torch ... more
6

Conveyor system OVERBECK QDA

Bünde, GermanyGermany dealership location
6460 km
used
working length 75 m Working width 330 mm Working height 740 mm roll diameter 48 mm Wheel width 330 mm Well-maintained, belt-driven roller track system with steel rollers. Total length: approx. 75 meters, 25 individual elements per 3 meters, Width of the track 410 mm, 30 rollers per track. Since the system is dismantled, not all dimensions can be precisely determined. Equipment: 1 curvilinear element, 2 inclined conveyor belts, 2 hinged doors for the runway, 1 Packing table with the control pa... more
6
This listing is for a 2010 BOGE K6 Piston Air Compressor in excellent condition. The item comes with a BOGE Daz 9 absorption drier, two tanks and various accessories. Boge K6 Air Compressor Pressure: 10bar/ 150psig Delivery Volume (50Hz): 0.466m3/min (16cfm) Nat2d Motor Power: 4Kw Dimensions (W/L/H):1012/784/804mm Weight: 209kg BOGE Daz 9 Absorption Air Dryer Design Pressure: 16 bar Flow Capacity: 33 cfm Motor Power: 4Kw Dimensions (W/L/H):300/495/1203mm Weight: 48kg Tank 1... more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Bbuztnpmyr AEC TDH-6Q Hot Oil HeaterSingle Zone Portable Hot Oil Process Heater including Temperature Control Unit with Cooling Water [...]: -- OMRON Digital Temperature Controls; -- Solenoid Control Heat Exchanger Water Cooling Unit; -- Compact Cabinet Design and mounted on casters for easy [...]: -- 75 kW Main heater power; -- 3.7 kW (5 HP) Pump motor; -- Max. operating temperature 288° C (550° F); -- Flow rate 340 LPM (90 GPM); -- Connecti... more
1
INJEKT ADRESSING SYSTEM GT PRINT36 BASED ON TECHNOLOGY HP, RACK VERSION OF FILM AND PAPER Manufacturer: GT Graph-Tech Ag Switzerland Bcssoy2bvz Cartridges: 3 Ink types: HP Black, spot colors, Versatile Black, Fast Dry Fonts: Almost all popular Windows fonts Linear speed: 36 m / min. at 600 DPI, 72 m / min. at 300 DPI and 144m/min. at 150 dpi Horizontal. Graphics capability: BMP Bitmap (option: pdf, tif, jpg, ...) Data Formats: all ASCII files (txt, and csv) ... more
4
Wood, milling, milling tools, wood cutter, profile milling cutters Demadobvw -LEUCO quick clamping system -Außen saw blade ø 250 mm Height 4 mm -Außen cutter Ø 237 mm Height 18 mm Recording ø 80 mm -1 x right -1 x left Price complete Weight 9.1 kg more
5

Conveyor systems Kaltenbach Querschlepper

Köln, GermanyGermany dealership location
6416 km
2000
used
Length of roller conveyors - infeed: mm Gco9byqo0 Length of roller conveyors - outfeed: mm Numbers of cross transfers:6 Stck. 6 pieces Kaltenbach cross transfers with the dimensions 5280 mm x 230 mm x 600 mm with motors and drive shafts more
6
Flat roof protection (life-line for flat roofs) serial. MACPHERSON (BAVARIA ALUSYSTEME) Material: Aluminium consisting of: -about 150 posts, 1 meter -approx. 330 connecting tubes, 3 meters -approx. 200 coupling pieces -approx. 41 ballast tank -approx. 65 ballast tubes -65 base plates -15 connectors 9wb3oznty -about 40 attic terminals -20 attic down protection fuses, adjustable -2 basic element, 3 meters -4 Add-on element, 3 meters -approx. 10 roof protection wall console, adjustab... more
5
Robot Romat 310, control ROTROL 32 TM incl. connection cable, handheld programming device. Dwagv3 Gas nozzle sensor, arc seam searching, C stand Torch welding machine MC 3 353, wire feeder, torch MRW 380 Mech. Cleaning, Photoelectric switch dreistrahlig, delayed start,. 1 table with 2 Drehkipptischen, recording weight 500 kg, faceplate axis controlled by the computer, unplugged tilting axis in 7 positions. ARC protection on the indexing table Price incl. dismantling and loading more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. E88ts8n FANUC M-410iB/450 Robot Palletizing SystemMaximum output; Bag palletizing 27 cycles per minute 220 Lbs -- Axis; (4) -- Payload 300 kg/ 661 Lbs -- Maximum reach 124 inches (3,150 mm) -- Repeatability + or - 0.5 mm -- Mechanical weight 4,297 Lbs (1,953 kG) -- Direct-coupled drives on all axis -- RJ3iB Controller -- Teach pendant -- Pallet tool operating software (re-licensed with Fanuc)Crating extra more
5
1.19 million color, 0.34 million S / W Hjpnckct3 Large A3 + reservoir, Finsher, can gather, clamp top left, and laying out and large display stack more
5
Diesel tanks, diesel tank, gas station, fuel tanks, capacity -for diesel, heating oil, mobile -with electric motor pump Capacity ca 30 L / min U8ogwy7em L display clock Content 800 litres Dimensions 1500/800/H1480 mm -Leergewicht 310 kg more
5
Number of drilling agregates:2 Stk. bore diameter:8 - 50 mm Cutting system: weight of the machine ca.:12 t floor-plate width:220 - 2500 mm Plate thickness:6 - 60 mm floor-plate length:50 - 6000 mm workpiece weight:6000 kg Tool changer:2 x 6-fach boring spindle drive:26 kW rapid- return speed:10000 mm/min bore feed:0-800 mm/min drilling spindle positioning:30000 mm/min torch height adjustment:200 mm Eeeler2 threading:M8 ? M30 Kaltenbach KF 2512 CNC Plate Processing Center The Kaltenbach KF ... more
3
length 1000 mm width 550 mm depth 550 mm total power requirement kW weight of the machine ca. 0,20 t dimensions of the machine ca. 1,20x0,90x0,90 m 2kvdvmql3 skip device more
15
We have a Buhrs 4000 poly wrapping machine available. Year 2000. Machine is in very good condition! Friction main feeder 3 rotary feeders Bcp2gjrwi9 1 rotary feeder old Integrated film cutting the unwinder to achieve the desired width Wrapping section with panel control RIMA cross-stacker Divert bin Small conveyor Machine is in very good condition! More photo's available. System is available directly! more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Glsghyeya COMPLETE WOOD SHAVING PRODUCTION AND BAGGING OPERATIONThis is a complete Wood Shaving Production and Bagging Operation Comprising off the following items: -- Custom build shaving mill 4 foot box, box driven by 7.5 HP motor, header 25 HP motor, (5) 24" knives; production up to 20 yards per hour. -- VERVILLE VP300 3-Station Bagger, high tubes of 116", finished bag size 11" x 17" and up to 30" high. -- Complete with hydraulic system and controls, ... more
2
Machine type plasma inverter system Make Lorch Type PLA 7020 Supply voltage 3 x 400 volts Adjustment range 20-60 amps Current adjustment 3 levels Max separation cut 20 mm Maximum quality cut 15 mm Cooling by built-in fan inverter Burner cooling by compressed air Run movable assembly line Securing 16 ampere Dimensions L x W x H 560 x 500 x 1,050 mm Bcswivl8ws Weight 70 kg Age 7 years Special accessories trolley State factory held tested very well, incl... more
5
Hydraulic filter system, hydraulic power pack, hydraulic pump, hydraulic pump motor power 0,55 kw speed 920 RPM hydraulic tank hydraulic filter Weight 250 kg Qlcok2oi7 more
1
Length of roller conveyors - infeed: mm Gqav98cge Length of roller conveyors - outfeed: mm Numbers of cross transfers:5 Stck. 5 x cross transfer tables for the cross transfer of steel beams, 9110 mm length x 430 mm width x 960 mm in height (possible to make shorter) with Lift + Carry System and 1 motor more
6
length 1800 mm width 1000 mm depth 1600 mm electrics - voltage/frequency V/Hz volume ca. 200 L total power requirement kW weight of the machine ca. 0,50 t Rc7pv03f dimensions of the machine ca. m supported for tilting, box like groove with handles. Basic frame with Parking box. Oil and water resistance due to weld. capacity aprox. 200L more
15
We have a Buhrs 4000 poly wrapping machine available. Year 2000. Machine is in very good condition! Bcp2gaaqu8 Friction main feeder 3 rotary feeders 1 rotary feeder old Integrated film cutting the unwinder to achieve the desired width Wrapping section with panel control RIMA cross-stacker Divert bin Small conveyor Machine is in very good condition! More photo's available. System is available directly! more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbuzrkxfmk ICS PORTA-KILN Portable Lumber Track Kiln with the following features:KILN BUILDING SPECIFICS -- Porta-Kiln XL arrangement. -- All Stainless Steel Interior and Baffle System. -- 2” Rigid Insulation rated for 180°F. -- Wood Bundle inside width: 10 Ft. -- Wood Bundle inside Length: 45½ Ft. -- Wood Bundle height: 8½ Ft. -- (2) Track Sets holding (5) Carts each -- Carts are 9½ Ft. long made of SS Steel. (New and la... more
2
Machine type plasma inverter system Make Rehm Type RTC 150 Supply voltage 3 x 400 volts Setting range 25-150 amps Duty cycle 60% ED 150 amp 100% ED 130 amp Stepless current adjustment Max separation cut 50 mm maximum quality cutting 40 mm Cooling by built-in fan inverter Cooling burner pressure air cooled Version mobile industrial plant Bcslvqr3la Protection 32 ampere Dimensions L x W x H 655 x 375 x 885 mm Weight 129 kg Age about 8 years old State ... more
5
Emulsion splitting plant, oil water separation system The cost-effective and permanently reliable The problem is usually the oil / water Separation of dispersed condensates. That purified water complies with the statutory Regulations on the channel launch Dimensions 750/600HH950 mm Hh8bpvh0i Weight 80 kg more
3

Exhausting system Elofil MS 1ERV15

Remscheid, GermanyGermany dealership location
6419 km
2009
used
air flow quantity 1500 m³/h Gjbcow0p0 suction power 900 m3/h power capacity 0,19 kW range L-W-H 775 x 670 x 700 mm weight 120 kg more
1

Sundry Presses HAEGER Type 412 Fastener Insertion System

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Ibj0esp more
1

CNC laser cutting system DNE Member of Bystronic 3015 ecoline 1000W

Schweinfurt, GermanyGermany dealership location
6663 km
2016
as good as new (ex-display)
DNE 3015 ecoline fiber laser Laser source: IPG 1000 watts Laser cutting head: DNE, full CNC focus = ᐳ vollautomtische position focusing on selected material! = ᐳ no mechanical adjustment of the focus! Faster on average! Cutting capacity ca: Aluminium up to 2.5 mm. Stainless steel (N2) 4 mm! Stainless steel up to 8 (O2) mm! Steel up to 10 mm. Power consumption: 9 kW (lasers & machine) Section (Lxw): 3000 x 1500 mm Max cutting speed: 20 m / min Maximum travel speed: up to 140 ... more
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Bcplu3xiq0 MAE BRIQUETTE SYSTEM MODEL AG-300 -- The AG-300 briquette machine can process various materials, including sawdust and shavings, at a speed of 300kg per hour. -- Hopper capacity 220l -- Average output 300kg per hour -- Briquette of 3-1/4" dia. -- 21 feet cooling system with Automatic cutting knife for 12" long briquette -- Lots of spare parts -- Loaded on your truck more
6
Saw mill ARI System 35 complete Circular saw mill Used, functional 87kh3pclo The system 35 is a high-performance-plant, for Flexibility in various wood types and at the same time top cutting accuracy. The plant includes: - infeed and conveying mechanization to the initial cut circular saw - initial cut circular saw ARI KS 12 - resaw machine ARI DS 8 - resaw machine ARI DS 8 – 2 - Mechanization for further transport - cut-off saw ARI KL 10 left side - tri... more
4
Pipe clamping system, Staples for butt welding machine, butt welding machine, mirror welder, pipe welding machine, mounting device for tubes Recording of 100-400 mm Qlm999uqk Double clamping device for tube mounting Dimensions 1000/450/H260 mm Weight 22 kg more
15
Professional photovoltaic cleaning system AQUACLEAN AQ A1 V2A Body made of stainless steel Four level remote- and manual operation Diaphragm pump 12 Volt 100 PSI 70 Ah battery Fully automatic. 12 volt battery charger (built-in) Mixed bed piloted 25 liter Permanent water control with automatic stop Alloy tube set 8 pipes 157.5 cm, 4 pipes 78.5 cm 2 brush heads 1 tube bag Plastics hose reels Rotating brush set with 25 m cable reel AQ füe TSC-1 spray bar A1 system Total 8 mixed bed re... more
2

Exhausting system KELLER KMKW 1/140

Göppingen, GermanyGermany dealership location
6699 km
1998
used
Dimensions (L/W/H) unbek. mm Filter capacity unbek. m² Number of filters unbkt. St. Number of dust containers St. Weight kg Dimensions (L/W/H) mm mm mm U2grni8mr more
1

CNC laser cutting system DNE Member of Bystronic 1012 ecoline 500W

Schweinfurt, GermanyGermany dealership location
6663 km
2016
as good as new (ex-display)
DNE 1012 ecoline fiber laser Laser source: IPG 500 watt Laser cutting head: DNE, full CNC focus = ᐳ vollautomtische position focusing on selected material! = ᐳ no mechanical adjustment of the focus! Faster on average! Cutting performance aluminum up to 1.5 mm. Cutting performance stainless steel up to 2.5 (N2) mm! Cutting performance stainless steel up to 6 (O2) mm! Cutting capacities steel up to 8 mm! Power consumption: 9 kW (lasers & machine) Section (Lxw): 1000 x 1200 mm 3... more


charging s...
daily

New machines via email!

Stay updated!

to

to

Edit search
CHARGING SYSTEM
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close