Counting scales buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
6
Platform scale SOHNLE type S10 2721 Fabr. Nr: 2813.21.001 94-569646 built around 1994 Wägebereich max. 1500 kg Part section 25-1500 kg / 0,5 kg Platform size 1500 x 1250 mm Height 80 mm 7dics0jep Power supply 220 volt, 50 Hz -Central display unit SOHNLE S10-2721 for connection of 2 scales -Calibration class III Dimensions L x W x H 1500 x 1250 x 90 mm Weight 280 kg good condition more
6
Platform scales BIZERBA Counting scale with additional Bench scale Built in approximately 2008 Wägebereich max. 1500 kg Section 1 4-600 kg / 0,2 kg Part section 2 10-1500 kg / 0,5 kg Platform size 1500 x 1500 mm Height 75 mm Power supply 220 volt, 50 Hz Qzbr3aob -Central display unit BIZERBA ST for the connection of two scales with preselection and counting function -Calibration class III -Bench scale (335 x 260 mm, height 100 mm) = Max 16500 g, min. 100 g, section 2 g,. -Thermal... more
5
Counting scale, scale, package level, -min 2.5 kg -Max 121 kg Weighing unit 1:10 / 1:100 Dimensions 860 x 700 x H 1820 mm Hh3i2v03k Net weight 100 kg more

Plattformwaagen diverse

Borken-Burlo, GermanyGermany dealership location
6360 km
used
multiple platform floor scales, also counting scales, analog and digital as a table top unit, Load-bearing capacity between 10 and 2000 kg to dispose of. More details on request Bluvf more
3

Paper Counting Machines Function Control P7

Aachen, GermanyGermany dealership location
6372 km
2011
used
The P7 is a stand alone optical sheet counter for the graphic Industry. The machine was never used and is still packed on the original pallet. Jiaqhuz Caliper: 0.06 – 1.0 mm, Stackheight: 99.5% for caliper > 0.20 mm; >99.8% for caliper < 0.20 mm, Cyclus time: more
4
Vicount E; good condition; cleaned and checked. Tabletop; with Strip bullet; Paper weight 25-240 g / m2; Counting speed 500-2000 / min; Max. Stack height 230 mm; Format A3. We are pleased at this point the note that all offered machines are in our unrestricted ownership or access and are available in our warehouse. Tours and demonstrations are possible by appointment at our premises. Bconadjvn9 Gladly we inform you also about our complete inventory because only a portion of our portfol... more
2

Counting unit Horizon PK-10

Germering b. München, GermanyGermany dealership location
6837 km
used
klicker for almost all horizon machines 0gku3h89 more
6
Platform scales, counting scales REHWA type 80 Z / V 24.2 Quantity scale Factory. Nr: 6494/96 model year 1996 Scale 1 Weighing range 0 to 30 kg Minimum weight 200 g Section 10 g Platform size 500 x 400 mm Height 100 mm Weighing range in red shell weighing 1 kg (piece number setup) Ptgxfi Counting steps in establishing number of 0.2 g Power supply 220 volt, 50 Hz -Calibration (calibration class III) -Program version V 24.2 -with counting function -Tare function -Manual Dimension... more
5
Counting scale, different 3elolpod Platform 31 x 28 cm -Max scale range 6 kg -min scale range 20 g more
1

Counting machine ATEC CYL MACOUNT 120

F- CONTAMINE SUR ARVE, FranceFrance dealership location
6598 km
2005
used
TECHNICAL DETAILS, part dimensions : 0.3 - 5 [mm], work tank Ø : 120 [mm], pace : 1500 part/min, precision : +/- 2 p. 0/00, supply : 110/220 [V], EQUIPMENT, carousel N°100-108. year 04/2015, vibrating hopper E27h7ixle more


counting s...
daily

New machines via email!

Stay updated!
3
Bbyk29lt3t Serial number: 17607 more
4
paper and card counting machine VICOUNT 3 PB ( PIN & BLADE ) Vicount 3 PB is part of Vacuumatic’s latest generation of single-head paper counting machines for the security and commercial printing industries. Drawing on over 60 years of experience in the paper and card counting industry, the Vacuumatic Vicount 3 PB is the benchmark for accurate, efficient paper counting and batching. Pin-&-Blade counting technology has been used in Vacuumatic counting machines for many generations with a... more
3

Counting unit Horizon PK-10

Germering b. München, GermanyGermany dealership location
6837 km
used
offer consists of: Bcp9fy7i klicker for almost all horizon machines more
1

Counting scale, scale, package Soehnle

Neustrasse 71-79, 42553 Velbert, DEGermany
6403 km
good (used)
Counting scale, scale, scale of the package Weighing unit 1:9 / 1:99 Cxny8cf more
5
AND HP-40 K new price €4400 Professional Platform scale and industrial scale digital package scale manufacturer no. HP-40 K - article number GZ-11103-30 41 KG, 41,000 g Readability 0, 5 g Ba0g8sldkh Units g, oz, lb/oz, oz t, ct, dwt, tael, Tola, momme115 V / 230 V severe execution 18 kg. With Schnittstelle.Am contact possible rust more
1

Counting machine ATEC CYL MO663-k0100

F- CONTAMINE SUR ARVE, FranceFrance dealership location
6598 km
2013
used
TECHNICAL DETAILS, part dimensions : 0.3 - 5 [mm], work tank Ø : 120 [mm], pace : 1500 part/min, precision : +/- 2 p. 0/00, supply : 110/220 [V], EQUIPMENT, carousel model MO663-K03000 2013. N°2013-3001 Kmuae7xd more
3
 Consisting of: balance CS 1-3, machine no. 704429 Weighing 0.002 3 kg bearing surface 220 x 320 mm Type B 2-310 scale, machine no: 407943 max weight range.. 30 kg bearing surface 370 x 510 mm Ltxdutwzm more
1
"AMTEC VERTIwrap Complete counting and packaging system for fruits, vegetables, etc. Gme7itq80 Fully automatic complete counting and packaging system for a wide range of agricultural products into mesh bags with a bag weight of 0.5 to 5.0 kg. Including feeding hopper, infeed conveyor, counting machine and fully automatic mesh bag packaging machines. - Specifications: max. speed of the machine in neutral: 18 cycles/minute; power: 380V, 2.6kW; compressed air: 6bar, 1.5m³; machine dimensions: cus... more
1

Counting unit Horizon PK-10

Germering b. München, GermanyGermany dealership location
6837 km
used
klicker for almost all horizon machines Buvco9cw more
4
sheet scale Bbpu29rupz Counting scale POLAR Mohr for precisely measuring the amount of printed sheets . Customer benefits Prevents additional work cycles, because counting is integrated into the jogging process Requires less space than conventional counting procedures Reliably detects difference in quantity between incoming and processed sheets Easy and fast to handle Description of counting scale The POLAR counting scale is used for precisely measuring the ... more
2
In the sales order we offer: 1 Multihead weigher 14 in very good condition, without building frame, completely in stainless steel, stainless steel, wet field execution. Bblkyadfuk more
2

Paper Counting Machine Vacuumatic MK2

Breitscheidstraße 43, 01156 Dresden, DEGermany
6828 km
ready for operation (used)
Vacuumatic MK2 Paper Counting machine, Bbmqsi0exh ready to use, with stand more
1
AMTEC VERTIwrap Multi-Feed-VFFS-System (10 disc) auto counting and packaging system for assortements Bbvjutyewl Sample system with 10 disc auto counters and a standard bag packaging machine. Suitable to count small parts like screws, fittings, candies, nuts, etc. and pack programmable assortements into pillow or 3-/4-side seal bags. - Systems can be customized regarding the number and size of the counting discs (this samples contains 10 counting discs !). - Packaging machine size and also the ... more
1

Counting unit Horizon PK-10

Germering b. München, GermanyGermany dealership location
6837 km
used
klicker for almost all horizon machines Qnqj0bhof more
5
VACUUMATIC MK 6 Mobile, mobile paper counting machine with stripes bullet Rmkq09kx counts printed and unprinted paper stack direct on pallet Paper thickness: 30-170 g / m2 Paper stack height: 1,350 mm Min. height: 130 mm Min. paper size: 560 x 300 mm Maximum paper size: any size of pallet Counting speed: free up to 1,500 sheets / min. Strip bullet: adjustable from 20 999 sheets up to more
6

Scales from a conveyor system Bizerba

Hofheim, GermanyGermany dealership location
6546 km
2004
used
20 30 piece scales from a conveyor system, Bizerba used -: prices please inquire !! must be submitted later Year: Manufacturer Bizerba Type 2004 Partly with conveyor systems and conveyor belts, some without. Available from mid / late July Condition: good Location: Geislingen Ejnnhqad more
2

Counting BIZERBA 100 g - 5,0 kg

Staufenberg, GermanyGermany dealership location
6563 km
used
Counting Fabr BIZERBA Machine 649 596 Specifications: Weighing range 100g - 5,0 kg - N314 / Taralaufgewichtseinrichtung used Rsslcm2r2 more
5
Item condition: maintained Maintenance: was regularly Dimensions WxDxH: 350 x 406 x 530 Availability: immediately Number: 10 pieces Retail: Yes 3ngwj0jvt more
6
Manufacturer: Schenck process Austria GmbH Year of construction: 2000 Yqf3ys Length: 16m, 2-piece set Max load: 60t Software and printer expanded! more
2
Stahlfolder scales delivery SAK 66.H with MCT control (round plug) 3fezojxeh more
6
Vacuumatic Vicount-2 paper counting machine BUILT 2007 ONLY 4,1 Mio. counting operations with table size DIN A 3 (upgradeable to other table sizes and integrable to cutting lines) Lobtkx batch tabbing (batch size max. 5 mm) repeatable or with stepless programming, min. batch 5 sheets max. pile height 230 mm counting speed max. 2000 sheets per minute counter max. 999.999 sheets paper thickness from 24 up to 240g/m2 (depends of the quality of paper) more
3
Vacuumatic Selectomat 80 paper counting machine Fresyit8 - paper counting machine for small printers, copy shops and so on - max. counting speed approx. 1000 sheets per minute - for paper from 40g up to 140g per squaremetre - counting preselection from 2 up to 500 - maximum batch height for counting 114 mm The machine was checked at the manufacturer's side in Germany. The machine is in checked and cleaned condition and available on stock. more
1
Elect./Voltage: 208 V, 60 Cy, 3 Ph. Bbu28hgq3m CHMER CM H32Z EDM Hole Drilling Machine -- Cross travel 9.8". -- Z-Axis servo travel 13.38". -- Backslide travel 7.9". -- Electrode diameters available 0.0080" - 0.236". -- Max height of workpiece 13.8". -- Dielectric reservoir capacity 6.3 Gal. -- Wire guide 0.040". -- Dimensions 35.4" X 4.43" X 89". -- Weight 1,763 Lbs. Equipped with: -- Programmable control. -- X-Y-Z-Axis built in DRO system. -- High precision glass scales. -- Aut... more
3
Balestrini PICO CN Automatic Round End Tenoner - 2013 CE For square end or round end tenons. Special configuration. - Single table working. - Foot pedal operation of working cycle. - Max tenon length 520mm (max workpiece width 560mm - giving 20mm shoulder each end) - straight horizontal tenons only. - Max tenon shoulder length 50mm. Bcb8mdssmn - Facility to still machine standard dimension tenons. - Special overhead pneumatic workpiece clamping configuration. - Extended support table ... more
9
Maximum cutting length: 1640 mm Maximum sheet thickness: 2 mm steel Manual back gauge, front adjustable 500 mm up to Juw7ty Page fence and table extensions Trailing stop also at an angle adjustable (with scale) Blade sharpened more
3
Spring balance, needle scale scale scale range from 10 to 230 kg Fe2radb more
6

Roller-Type Feed Unit WENIG

Bünde, GermanyGermany dealership location
6460 km
used
workpiece length 3000 mm Bbmiowkaqa roll diameter 50 mm work piece width 210 mm Height 800 bis 1100 mm dimensions of the machine ca. 3 x 0,33 x 055 m Unused discharge roller conveyor with measuring scale and fold-up stop = 770, -. Unused feeding roller conveyor with two feet Photo 5-7, price 580, - (2 pieces available). Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
7
Traverse path x/Y/Z in mm: 1006 / 610 / 762 Table load in kg: 1000 Table size in mm: 1250 x 850 Speed in rpm: 50-8000 / 2-step Bcrsekzz7k Torque: 300 nM Control: HEIDENHAIN iTNC 426 Spindle drive: 16.5 kW Spindle retainer: ISO SK40 Programme only 13804 h Accessories:-magnetic chip conveyor -innenere coolant supply with band filter system -Workpiece probing system using infrared: HeidenhainTS 632 -in all axes glass scales with seal air more
1
Elect./Voltage: 208/230 V, 60 Cy, 3 Ph. Ncdap AGIE CHARMILLES Progress V4 Wire EDM -- Rated cutting speed 47" Sq/Hr. -- Maximum workpiece size 51.9" x 39.3" x 26". -- Maximum workipiece weight 6,614 Lbs. -- Machining stroke 31.50" x 21.65" x 20.67". -- Machining stroke ( U / V ) 31.50" x 21.65". -- Upper head to table surface 6.25" - 26.92". -- Taper capacity 30° 21.65". -- Axis drive (X, Y, U, V) servo motor encoder w/ glass scales. -- Axis drive (Z axis) AC servo motor. -- Rapid... more
5
work piece width:300 mm workpiece height:50 mm bore diameter:8 - 27 mm total power requirement:25 kW weight of the machine ca.:3 t dimensions of the machine ca.:2,3 x 2,5 x 1,4 m Qf2v3yxv workpiece weight:max. 3 t Peddinghaus CNC controlled beam saw drill line DSC300 D with disc saw for 90° cut, saw blade size 630 mm, incl. signomat, roller feed measuring system, 3 drill spindles for HHS inner coolant drills Ø =8-27 mm, incl. infeed and outfeed roller conveyor. This small saw drill line is esp... more
1

TRUMPF TrumaBend V 50 TRUMPF TrumaBend V 50

Backnang, GermanyGermany dealership location
6667 km
1996
used
Technical Data item number:: PM-1251 Manufacturer:: TRUMPF Type:: TrumaBend V 50 Year:: 1996 Bending length:: 1275 mm Press force:: 50 to Control:: Delem DA 65 Working hour:: 67666h Bbciu3b0c7 Stroke:: 215 mm Beam entry:: 385 mm Distance between side frames:: 1040 mm Throat:: 410 mm Y-Rapid speed:: 200 mm/s Y-Operating speed:: 1-13 mm/s Y-Return speed:: 135 mm/s Operating height:: 1050 mm Length:: 1930 mm Width:: 2030 mm Height:: 2375 mm Weigh... more
5

KOLBUS Prägepresse PE 312

Espelkamp, GermanyGermany dealership location
6453 km
1999
ready for operation (used)
Ceiling before stack band Ceiling ceiling forming machine DBA magazine Nfcfp Mobile counting batch delivery with role railway export more
3

Wheel Balancing Machine HOFMANN GS-1

Bünde, GermanyGermany dealership location
6460 km
used
grinding wheel weight max. 20 kg grinding wheel diameter 320 mm grinding wheel width max. 140 mm range L-W-H 0,41 x 0,27 x 0,36 mm weight 9,7 kg Balancing scales Hofmann GS-1. Test pin length 178 mm, spigot 15 mm diameter. Rsdjt9od Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
5
Traverse path x/Y/Z in mm: 1006 / 610 / 762 Table load in kg: 1000 Table size in mm: 1250 x 850 Speed in rpm: 50-8000 / 2-step Torque: 300 nM Control: HEIDENHAIN iTNC 426 Bbilp0i9ew Spindle drive: 16.5 kW Spindle retainer: ISO SK40 Programme only 16038 h Accessories: -Workpiece probing system using infrared: HEIDENHAIN TS 632 -in all axes glass scales with seal air more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Bbu28qxwqn CHARMILLES Robofil 290F Wire EDM -- X-Axis travel 15.7&rdquo;. -- Y-Axis travel 9.8&rdquo;. -- Z-Axis travel 7.87". -- U-Axis travel 15.7&rdquo;. -- V-Axis travel 9.8&rdquo;. -- Maximum workpiece weight 1,100 Lbs. -- Maximum workpiece size 33.5&rdquo; X 19.7&rdquo; X 7.87&rdquo;. -- Wire diameters 0.004&rdquo;-0.012&rdquo;. -- Wire spool size 17.7 Lbs. -- Taper capacity 0-30°. -- Machine size 71&rdquo; X 63&rdquo; X 87.8&rdquo;. -- Mac... more
6
spindle diameter 160 mm x-travel 4500 mm y-travel 3000 mm spindle taper ISO 50 spindle turning speed range 3 - 850 U/min ram-type - ram dia. 440 mm ram stroke 550 mm main drive motor 63 kW Feed motor 11,5 kW boring spindle diameter 160 mm milling spindle diameter 260 mm Control Siemens 840C drilling depth in one stroke 915 / 1565 mm spindle turning speed range 3 - 340 / 850 U/min max. torque on the spindle 55 NM rapid travel x/y/z 4000 / 3000 / 4000 mm/min z-axis 934 mm w-axis 550 mm b-axis 20... more
8
Open side coordinates drill; Manufacturer WMW Mikromat Dresden, model: BKoE 315 x 500; Specifications: table size 315 x 500 mm, maximum load 100 kg, adjustment speed 52/160/400/1000 mm / min; Drill feeds up / down 0.006/0.025/0.055/0.22 mm / Rev; Friction feed up / down 0.5 mm/Rev; Spindle stroke 100 mm core diameter 80 mm tool holder MK 3. Speed range with 19 steps (45-2,800 RPM); Workspace table: longitudinal adjustment 400 mm, lateral adjustment 250 mm; height adjustment spindle stock 360 mm... more
1
Crane scale with remote control digital Bcqd2oxgob Crane hooks and shackles Maximum weighing range 6,000 kg Accuracy of d = 2 kg more
5

Vise WENIG MS 2

Bünde, GermanyGermany dealership location
6460 km
used
thickness of jaw 160 mm weight 54 kg clamping width 310 mm height 220 mm dimensions of the machine ca. 600 x 300 x 300 m Bbmiomy029 Vice can be swiveled in two axes. - rotatable by 360 ° about Z-axis - swiveling vertically-horizontally by 90 ° - heavy casting construction - aligned with degree scales in both axes - fast adjustment - incl. hand crank Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more


counting s...
daily

New machines via email!

Stay updated!

to

to

Edit search
COUNTING SCALES
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close