Petratto Cordoba 3D die dual creasing and perforating machine with window pocket
flat pile feeder, double sheet control, first bar creasing station, second bar creasing/perforating station, window folding pocket, stream delivery with pressing.
Option: Hotmelt glue unit with nozzle.
Machine: Creasing and perforating machine
Manufacturer: - Petratto [...]
Model: - Bat Pile
Feeder: - Flat pile feeder with pressure vacuum pump and lateral blown air
- Double sheet control
Control: - Touch Screen
Sheet width: - Max. 520 mm
- Min. 150 mm
Sheet length: - Max. 1.200 mm
- Min. 200 mm
Creasing unit: - Creasing unit with bars and counterbars for positive crevices
Creasing: - Crease distance adjustable in 0.1mm increments
Positioning: - Positioning up to 36 cross groo... more
Max. with for perforating 720 mm
Max. thicknes of the block 2,5 mm
Max. production 1000 perforating block per hour
Control motorised, control by foot pedal
Perforating and creasing machine for callendars, paper notes, photo albums, posters and other book production. Maximum size for perforating is 720 mm. Maximum production depend on media and operator skills. Very easy and quick change of tools, easy of use, no setting.
I9dcqklCounter (m): Sum counter 2385
Format (cm): Min. 10×15 / Max. 36×70 ( 50×85 / 50×100)
Equipment / Additional information:
additional perforation heads
Programs : 200 program and memory capacity of 100 creasing
Electrical supply : 230/240 Volt
Speed : up to 7500 sheets / hour (A4)
With extension feeder : 360 x 850mm more
Creasing & Perforating machine Stewo 198
Year -, - Serial-No. 198
Working width max. 700mm
Tools Perforation - Creasing tools
max. 12-18 sheets depend on weight of each sheet
-Available Immediately -
-can be inspect-
-on stock - can be test- more
driving - and height-adjustable creasing machine with hand conditioning and storage box
fitted with 5 grooves tools with their counterparts
continue to be 4 tools for mounting slot - and Perforiemessern!
Strength of Groove and speed are adjustable.
Maximum inlet width 85 cm working width 70 cm, 220 volt
MORGANA AutoCreaser PRO 50 - working width 500 mm; processed papers with inlet width up to 500 mm and a total length up to 1,000 mm (manual feed), convinced by his basically grooves bar grooves technology. The drawer gently using a sniffer at speeds up to 8.500 sheets / h (depending on the paper and number of grooves). The Groover can be established also for smallest runs in minimum time. This causes a massive time savings compared to manual grooves or a finishing outside the home, what is often... more
Max sheet length: 900
Max sheet width: 450
We are pleased to offer:
Petratto Batfold PILA Folding Creasing Machine, Year 2015. Serial Number: 0101462. *With Roboperf*
Creaser folder, continuous stream feeder, sidelays and positioning rollers, die creasing section is make and female, buckle fold unit, Stream delivery, Roboperf for circular perforation Vouchers, tickets etc
Max sheet size 45 x 90cm, min sheet size 15 x 20cm, stock rang perf/score 80gsm-600gsm, stock range perf/score and ... more
Semi automatic creasing machine
Sheet size 200x150 - 1.200 x 450 mm
Paper weight up to 450 grams
Creasing by computer with memory
Condition as new
Operation cycle manual feeding of substrates into the machine, machine then creases a preset number of creases into the substrate and feeded out onto the bin
Available direct more
high capacity rotary perforating/creasing/cutting machine
material thickness up to 0.8 mm
Stahl FEC 78.2 vertical pile feeder with Tremat
max. 78 x 116 cm, min. 15 x 20 cm
a lot of accessories/tools more
Groove perforating machine; very good condition; with various tools to creasing and perforating; Max. Width 700mm, min. 120mm; Max. Length 600mm, min. 100mm; Mobile; separate compressor; Suction feeder.
We are pleased at this point the note that all offered machines are in our unrestricted ownership or access and are available in our warehouse.
Tours and demonstrations are possible by appointment at our premises.
Gladly we inform you also about our complete inventory because onl... more
electric grooving and perforating machine
working width: 68 cm
table front and rear with center guide
1 paper stop forward
1 side flap left
1 stacking table
1 grooved comb
1 perforating comb (hole)
1 foot switch
good condition more
Groove - and perforating machine with the following facilities:
two Nutwerke, either to the grooves and or perforate and transverse direction.
In addition two stroke perforating heads in the longitudinal direction.
Two recording in addition to Perforierlinen.
The machine is controlled via the display and set up
and about program space.
Counter: 98.800, commissioning: 05/2015
The machine is in excellent condition.
Perforating machine Punch Super 600
The machine is brand new.
12 months warranty.
Perforator Super 600 is an industrial machine used for perforating paper, among others, in the production of calendars. The solid construction of this device allows for continuous and one-time hole punching of a block of paper up to 5 mm thick. The efficient drive system enables 60 cycles per minute. The device has been designed in a way that allows us to change the tool which makes the machine more universal, the... more
Pressure: 150 t
Table size: 450 mm x 1000 mm
Throat depth: 800 mm
Accessories: With supply and evacuation roller conveyor and automatic feed
Dimensions of the machine:
Length without roller conveyor: 900 mm
Roller length: 1850 mm
Depth: 2000 mm height: 2550 mm feed unit: length: 2100 mm
Depth: 1100 mm
Height: 1200 mm
AutoCreaser Pro 33 - Paper Creasing Machine
The AutoCreaser Pro 33 is an easy to use paper creasing machine for digital printers, which allows the user to cut, crease and fold by employing a unique creasing rule that eliminates paper tearing and therefore cracking.
This model is based on the AutoCreaser but in addition it offers many new features and benefits to the user. The most obvious difference is the intuitive 7” SmartScreen that controls all the main functions of the AutoCreaser Pro 33.... more
Rotary Cutter and Creasing machine for Corrugated board
Kreisschere und Rillmaschine fuer Wellpappe
Serial no.: 1025
Machine No. 11758
Format max.: 1650x1200 mm / min.: 250 mm
Speed: max. 3600 /std
• Creasing and straight perforation
• Automatic feeder include compressor
• Speed: Up to 3600 sheet/h
• Paper size min: 8,9 x 12,7 cm
• Paper size max: 45,7 x 57,0 cm
• Paper weight: 45 - 385 gsm
• Include compressor for feeding system
• Compressor for air pressure optional/on request
checked / working condition / Test possible / in our stock
Morgana DigiFold Pro - Paper Folding and Creasing Machine
The Digifold Pro is the ideal product for folding heavier weight paper stock. Designed specifically for the professional digital or litho printer who has a need to crease and fold digitally printed, heavy weight or cross grained stock.
As a stand alone paper folding and creasing machine it is easy to use, and has been one of Morgana's best selling products since it was first introduced in 2001.
Over 1000 units were sold before ... more
DIDN'T FIND ANYTHING SUITABLE?
Save this search now and we will inform you about new machines free of charge!
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
All brand names are the property of their respective owners. Thorsten Muschler GmbH
does not accept any liability for the content of linked websites.