Double ended buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
7

Double ended grinder VITAX V2

Beringen / Schaffhausen, SwitzerlandSwitzerland dealership location
6675 km
good (used)
1x Cup wheel , 1x Tangential wheel Tangential wheel: Diameter x width 160x35mm Bbjd9t7lo3 Table size 75x35mm Cup Wheel: Diameter 200mm Table size 220x200, tilting MARCELS MASCHINEN CH more
3

Double-ended decoiler ATKIN PCD500-225

Berkswell, United KingdomUnited Kingdom dealership location
5803 km
used
One used Atkin model PCD500-225 double-ended motorized decoiler Max coil weight 500 kgs Mandrel range 255-570 mm Max coil width 225 mm Max coil O/D 1000 mm Max speed 18 RPM Ebeyzlr Machine weight 400 kgs approx. more
9

Double ended grinder ISELI 150

Beringen / Schaffhausen, SwitzerlandSwitzerland dealership location
6675 km
good (used)
Wheel diameter 150mm Table: 290x130mm , Tilting +/- 15 ° Bbjd9kmf02 MARCELS MASCHINEN CH more
7

Double ended grinder VITAX V3

Beringen / Schaffhausen, SwitzerlandSwitzerland dealership location
6675 km
good (used)
1x Cup wheel , 1x Tangential wheel Tangential wheel: Diameter x width 260x50mm Table size 110x40mm Bbjd9a2ag0 Cup Wheel Diameter 300mm Drill grinding device MARCELS MASCHINEN CH more
5

Double ended grinder JOOS W40

Beringen / Schaffhausen, SwitzerlandSwitzerland dealership location
6675 km
good (used)
Wheel diameter 400mm Bbjd8xj0sz Wheel width 50mm MARCELS MASCHINEN CH more
4

Double ended grinder IFANGER F300

Beringen / Schaffhausen, SwitzerlandSwitzerland dealership location
6675 km
ready for operation (used)
Grinding wheel 300x20mm Na2cl Speed 1355 rpm Motor 0.8 HP MARCELS MASCHINEN CH more
6

Double ended grinder IFANGER F 300 (2x)

Beringen / Schaffhausen, SwitzerlandSwitzerland dealership location
6675 km
used
Double execution. ( School machine ) with exhausting device. Table universal: rotating,tilting,swiveling. Pss8rf7x8 Grinding wheel diameter 300mm MARCELS MASCHINEN CH more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbu7z0rwcu S. A. WOODS 525 BM-2 End Matcher;(1) Left and (1) Right separated shaper units. -- Tongue unit with: Trim saw approx. 5 HP motor, (1) set of Top/Bottom. heads approx. 5 HP motors for machining the tongue. -- Grooving unit with: (2) sets of Top/Bottom units (4 heads total) for machining the groove, approx. 5 HP motors on each. -- Part Dimensions: Approx. 3/8" - 1" Max. stock thickness, 8" Max. width, and 10" min. by 7.5' Max. length. --... more
3
MACHINE DATA Koch Model BD-60-A Double sided Boring & Dowel Inserting Machine with vertical Hopper Feed Make: Koch Maschinenfabrik GmbH & Co KG Model: Koch Model BD-60-A Serial#: A0705/7617 Year of Mfg.: 2007 Condition: Very Good few working hours Was installed in the USA, Plant stopped working in late 2008-2009, low working hours! Purchased and packed in 2009, stored in the US till now! DESCRIPTION Telephone modem for Tel... more
6
Gabbiani Double End Tenoner Model S.Q.V Full CNC Controlled Year 2001 2 X 2.4 KW Jump Scoring Units 2 X 7.5 K.W. Hogging Units 4 X 8.0 K.W. Stack Tooling Shaping Units (533 MM Height) 3000 mm Opening Min. Width 235 mm Max. Height 120 mm 0-36 Variable Feed Speed 33” Laydown Space 83” Laydown with Extensions Driven Top Pressure Full Sound Enclosure 99fxtx02b 460 Volts more


double ended
daily

New machines via email!

Stay updated!
6
Bcifqohzat Serial No. 1988 Capacity 2500mm x 10mm Rolling, Cone Rolling 5mm, Prebending 6mm Length of rolls 2600mm Roll diameter 240mm Roll rise & fall Hydraulically Input 415/3/50 ac 7.5 kW Actuated via Hand Levers Fitted with RIGHT HAND DROP END Length 15'4" / 4.67m Width 4'8" / 1.42m Height 4'6" / 1.37m Nett weight actual 6.3/4 ton / 6858 kgs more
3
Siemens 6SL3120-2TE21-0AA4 double motor modules, serial number according to the photo, used, low wear, 100% functional, included with com. photos Bckby8qow0 more
5
Pneumatic Double diaphragm pump - quick venting and direct suction of the medium -Works with handles up to 20.000 mPas and solids up to 2.29 mm Dry running without damage. Hermetically closed for moisture-sensitive fluids -Excellent for abrasive liquids with low to medium viscosity and shear sensitive materials 3 / 4 " Performance 61 litres per minute weight 4 kg Qlv2d3vga more
1
Elect./Voltage: 600 V, 60 Cy, 3 Ph. Bctbfllvde HOLYTEK ETC 66 S Double End Tenoner -- (6) heads; Trimming, shaping,disc/brush sandingTechnical Description: -- Machine opening 20o mm to 200 mm (7.8" to 78") -- Thickness maximum 120 mm (4 3/4") with manual adjustment and mechanical readout -- 1st Station: Trim saw, maximum blade size 305 mm, motor 5 HP, 3,40 RPM -- 2nd Station Universal shaping unit, motor HF 7.5 HP, 2 speed 3,000/8000 RPM, arbor 40 mm X 180 mm long -- 3rd Station Sanding/... more
5
x-travel 2210 mm y-travel 820 mm workpiece height 860 mm table-size 2000 x 750 mm length of stroke min./max. 163 - 2210 mm column daylight 850 mm work speed 5-55 m/min return speed 5-75 m/min cross rail adjustment - horizontal 880 mm cross rail adjustment - vertical 250 mm side head - cross travel 250 mm side head - vertical travel 850 mm feeds crossrail slide horiz 0,1-10/vert. 0,1-5 mm/min feeds side carriage 0,1 - 5 mm/min workpiece weight 5400 kg pulling power 4000 kg total power requirement... more
6
faceplate diameter 5300 mm swing diameter 6300 mm turning height 3500 mm max. ram stroke 1800 mm table load ca. 80 t faceplate turning speed range 0,35 - 14 U/min feed range 0,063 - 11,2 mm/min swivel range of slides - vertical +/- 30 ° cross rail - adjustment 3300 mm tool travel 3450 / 1000 mm turning tool - shaft cross cut 50 x 50 mm crossrail -rapid travel 500 mm/min rapid travers - turret head, hor./vertical 960 mm/min dimensions of the machine ca. 14,2 x 8,2 x 9,7 m total power requirement ... more
7
Serial No. 94101 208-1206 Angles (Leg-Out) 150mm x 150mm x 15mm Angles (Leg-In) 150mm x 150mm x 12mm "T" Section (Leg-Out) 150mm x 150mm x 15mm "T" Section (Leg-In) 150mm x 150mm x 15mm Bcifm2zvqh Square 90mm Flats On Edge 250mm x 40mm Flats on Flat 150mm x 30mm Bottom Rolls Rise & Fall Hydraulically Actuated via Free Standing Control Console Fitted with 1 Set of Universal Rolls Length 6'11" / 2110mm Width 7'7" / 2311mm Height 7'0" / 2134mm Nett weight actual 7.8 ton / 7920 kgs Comments ***Vide... more
3
Siemens 6SL3120-2TE21-8AA0 double motor modules, S T UN2034985, second-hand, normal wear, 100% functional Nekc2 more
5
Frequency inverters, frequency converters, drive inverter, controller variable speed drive Sinamics S120-Siemens double motor modules 6SL3120-2TE13-0AA3 -Max kW Input DC 600V Output 3AC 400V 3A/3A multiple converters available Award pieces 500/50/H270 dimensions mm Weight 5.4 kg Qlxzwtsus more
1

SHREDDER (DUAL-SHAFT) WRT SHREDDER DOUBLE SHAFT

North Carolina, United StatesUnited States dealership location
518 km
used
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bb008mjibj WRT DOUBLE SHAFT SHREDDER -- 150 HP motor -- Feed opening 48" x 90" -- 2-1/2" Thick blade -- 32 Blades -- Loaded on your truck more
4

Planer-Type Milling M/C - Double Column MATTEC 80-30-60

Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
2015
used
x-travel 8500 mm y-travel 4400 mm z-travel 1600 mm Control Heidenhain iTNC530 surface area 10000 x 3200 mm rapid traverse 20 m/min spindle turning speed range 4000 U/min Torque 1000 Nm Bcbhpsinxt tool taper ISO 50 number of tools 61 total power requirement 60 kW weight of the machine ca. 62 t Portal milling machine Mattec 80-30-60 - spindle hours approx. 980 hours - Main spindle drive air-cooled - Lubricated and cooled two-stage gear-oil circulating air -> 1st stage - 1000 Nm in S6 opera... more
5

Vertical Turret Lathe - Double Column TITAN SC 4044

Mönchengladbach, GermanyGermany dealership location
6371 km
2002
used
faceplate diameter:4000 mm swing diameter:4400 mm turning height:2060 mm slide stroke:1200 mm Vsetae ram head dimension:250 x 250 mm faceplate turning speed range:1 - 92 U/min cross rail adjustment:1800 mm workpiece weight:30 t feeds:1 - 2000 mm/min main drive motor:55 kW total power requirement:80 kW weight of the machine ca.:64 t dimensions of the machine ca.:9,0 x 7,2 x 6,6 m with CNC SIEMENS 840 D for 2 axis tool Basic holder KM 80 In process camera screen coolant attachment and chip conve... more
10

Horizontal Bandsaws BEHRINGER HBP530A 530mm automatic double column

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
1998
ready for operation (used)
Serial No. 598642 Capacity Rounds 530 mm or 530 mm x 520 mm rectangular Twin Pillar yes Input 415/3/50 7.5 kw Speeds 17 - 110 m/min Bcieplvire Vice opens 540 mm Twin vices yes Stroke of feed vice 600 mm Multi Feed yes Fitted with Chip removal brush, swarf conveyor and coolant. Length 13' Width 7' 6" Height 7' 8" Nett weight actual. 4,770 Kgs / 4.7 Tons more
6
Sick C20S-180103A12 + C20E-180303A12 safety light curtain C 2000 extended version (transmitter + receiver), serial number according to the photo, used, normal wear, 100% functional, included with com. photos Dwbhdm more
5
Frequency inverters, frequency converters, drive inverter, controller variable speed drive Sinamics S120-Siemens double motor modules 6SL3120-2TE15-0AA3 -Max kW Input DC 600V Dakctdd Output 3AC 400V 5A/5A multiple converters available Award pieces 500/50/H270 dimensions mm Weight 5.4 kg / piece more
1

DOUBLE END TENONER JENKINS 195

North Carolina, United StatesUnited States dealership location
518 km
used
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Grxinikni JENKINS 195 Double End Tenoner PLC ControlesStationsStation 1 (Trim Saw): (2) 7-1/2 HP, 3600 RPM,1-3/4” D X 5” L Self Tightening threaded Arbor, 12” Cap. Trim Saws, Vertical, Horizontal and Tilting Axis PositioningStation 2 (High Speed Jump Cope): (2) 7-1/2 HP, Belted to 7200 RPM, 1-1/4” D X 8” L Threaded Arbor, None Tilting Left and Right Hand Lower High Speed Jump Coping heads, Vertical and Horizontal Axis Position... more
10
Long bending machine, double-bending machine, bending Center Manufacturer Variobend Type DB 8.1,50 Bauajahr 2013 CNC controlled maximum length of Kant 8,600 mm maximum bending capacity 1, 50 mm Einlegehöhe 750mm Depth 1200mm maximum bending angle of 140˚ Measuring range depth stop 5-1200 mm High end equipment L x W x H 9800 x 1800 x 2200mm 7vatybq Weight approx. 10,500 kg Machine is located in an excellent condition more
1
pressure:40 t distance between columns:600 mm stroke: mm ram power:40 Mp max. ram stroke:160 mm dayligth:360 mm table-size:560x400 mm T-slots:18 mm ram hole:40 mm table height:950 mm Total height:2540 mm length in width:1440 mm Mskwyo power capacity:5,5 kW centering bore - table plate:100 mm depth:1100 mm column depth:950 mm oil box capacity:250 l total power requirement:ant kW weight of the machine ca.: t dimensions of the machine ca.: m 100 % before loading warranty: none used double colum... more
1

Horizontal Bandsaws KASTO 520AU Double Column Automatic Horizontal Bandsaw, 520mm capacity

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Serial No. 160 Capacity 520mm Diameter or 520mm x 520mm Square Input 415/3/50 ac 5.5 kW Speeds 65'-426' / 20 Metres-130 Metres Per Minute Vice opens Hydraulically Twin vices Yes Stroke of feed vice 500mm Fitted with Coolant Bciepvgoff Length 3400mm Width 2200mm Height 2350mm Nett weight approx. 3 ton 15 cwts / 3810 kgs more
3

Vertical Turret Lathe - Double Column DÖRRIES SDE 280

Mönchengladbach, GermanyGermany dealership location
6371 km
1965
used
faceplate diameter:2800 mm swing diameter:3500 mm turning height:2315 mm faceplate turning speed range:2,1 - 1112 U/min Mljuf max. workpiece weight:12.000 kg feeds:0,044 - 8 mm/U ram head - vertical travel:1000 mm ram head swiveling:+/- 45 ° turret head - vertical travel:800 mm total power requirement:50 kW weight of the machine ca.:35 t dimensions of the machine ca.:5,2 x 4,4 x 5,1 m with two vertical heads more
5
Cabinet with drawers, tool Cabinet, steel workshop Cabinet Width 1430 mm depth 640 mm height 1130 mm drawers inside dimensions 610 x 460 mm Drawers height 6 x 50 / 1 x 70 / 2 x 145 / 1 x 195 / 1 x 400 mm Hdoxqsl Weight 290 kg more
1
Elect./Voltage: 380 V, 50 Cy, 3 Ph. Bbvqun2fz0 RILESA AHS 1404 Double Sided Cut Off and Bore;Made in Denmark, RILESA builds heavy duty machinery for cut, shape, and dowel operationsMachine Specifications: -- (2) Drilling supports from side (each with 5 drills). -- (1) Drilling support from bottom (each with 5 drills). -- Drill bit centers 32 mm. -- The side drilling motors (2) x 0.25 kW. (.33 HP). -- The back drilling motor 1.1 kW. (1.5 HP). -- (2) Saws (pneumatically regulated), S... more
1
We offer for sale: Yifgxkm Partition for double shelf / shelf, used 1 element length 1.32 m / height 2.80 m only &acirc ?&not 40,50 incl. VAT Optionally available: Material for 1 double shelf field: 2 pieces of double-sided frame / pillars, about 2,800 x 1.200 mm 8 piece backs height 400 / 500 / 600 mm div. colors, such as light grey, black, yellow. more
8
Maximum pressing force: 1000 kN Max stroke: 400 mm Table: 900 x 400 mm Bbp0css7ni Total weight: 4500 kg Total height: 2960 mm more
12
Serial No. 52064 Control Siemens 840D Colour Graphic Ccontrol Table Size 1700mm Table Speeds Low Range 0-30 rpm, Middle Range 30-74 rpm, High Range 74-155 rpm Swing 2000mm Height Under Cross Slide 1800mm Height Under Turret Twin Ram Cross Travel 1500mm Cross Slide Rise & Fall 800mm Ram Rise & Fall 1200mm Bciegnr9yg Vertical Traverse Cross Rail 1500mm, Vertical Travel of Each Ram 1000mm Input Main Motor 75 kW Fitted with 2 x 12 Station Automatic Tool Change Equipment 17 x Quick Change Toolholder... more
5
Technical data: Pro pump 380/ 460 V Vq0zwm 1450/1740 L / min 15/18 kW Article NR:. 121816894/0007 Price: €14500,- more
5
Double shaft hydraulic pump, oil pump, gear pump recording Ø 22.5 mm Price per piece -2 x available Dimensions 300/120/110 mm weight 9 kg Liaal more
1
Elect./Voltage: Bbu77m9zta FRIULMAC Quadramat Double End Tenoner -- 2,500 mm (98") Max. x 180 mm (7") min. opening -- Loading space 642 mm (25") -- Thickness 10 - 100 mm (0.4" to 3.9")Equipped With: -- Hogging/ Trim - Hogging/trim - Jump cope - Cope. -- Motorixed opening with LED readout on the control panel, approx. 25" infeed in front of hold downs. -- Variable speed feed 4-30 M/min. (13'-98"/min.), feed motor 4.5 HP -- Feed chain 2-7/8" wide with rubberized pads -- Top pressure wi... more
5
x-travel:12000 mm y-travel:5600 mm z-travel:1250 mm workpiece height max.:1850 mm table-size:12000x3600 mm T-slot (width-distance-quantity): mm max. table load: kg distance between columns:4400 mm distance spindle nose and table: mm spindle drive:32 kW max. torque on the spindle: Nm spindle nose:50 ISO spindle speed:10-2500 U/min rapid traverse X,Y:10000 mm/min. rapid traverse Z-axis:10000 mm/min milling feed range:0-3000 mm/min Machine size (LxWxH):19.700 x 10.000 x 7.400 mm total power requir... more
6
Maximum cutting length: 6000 mm Maximum blade diameter: 420 mm Funlku7 5 controlled axes (automatic positioning, direct input of the tilt and swivel angle) Pneumatic folding material support arm more
8
Serial No. 4266 Capacity With Appropriate Rolls Angles (Leg-Out) 6" x 6" x 7/8" / 152mm x 152mm x 22mm Angles (Leg-In) 6" x 6" x 3/4" / 152mm x 152mm x 19mm "T" Section (Leg-Out) 6" x 6" x 5/8" / 152mm x 152mm x 15mm "T" Section (Leg-In) 6" x 6" x 5/8" / 152mm x 152mm x 15mm Bcifkpqip9 Square 3.1/2" x 3.1/2" / 89mm x 89mm Flats On Edge 8" x 2.3/8" / 203mm x 60mm Flats on Flat 6" x 1.1/4" / 152mm x 31mm Input 415/3/50 ac 22 kW Roll Diameter 470mm Shaft Diameter 150mm Actuated via Free Standing C... more
1
x-travel 10250 mm y-travel 5320 mm z-travel 800 mm w-axis 2900 mm table-size 10000 x 4000 mm distance between columns 5000 mm workpiece weight 40000 kg distance table - lower edge spindle 3500 mm spindle diameter 100 mm diameter of quill 330 mm spindle turning speed range 30 - 4500 U/min spindle taper ISO 50 spindle motor 30 kW feeds x/y/z -stepless 1 - 6000 mm/min rapid travel x/y/z 10/20/8 m/min Control Fanuc 31i total power requirement 100 KVA weight of the machine ca. 130 t dimensions of t... more
2
-Stainless steel, work desk-stable execution-doppelseitiger table tray Dimensions 2000 x 1800 x H 800 mm weight 100 kg Sq9xtc more
1
Elect./Voltage: 600 V, 60 Cy, 3 Ph. Gl0jqxdlg CELASCHI TSA400 C Double End TenonerMax working width 165" and with (5) working units each side;Feed System: -- 60" Infeed load space and 36-1/4" passline height. -- 3" Wide rubber pad surface feed chains and with chain dogs mounted every 15". -- Adjustable top pressure bars with single rubber holddown belts. -- Left hand infeed adjustable fenceEquipped with: -- 1st station: (Right/Left) adjustable height tilting jump scoring saws, 1.5/2.6 H... more
6
Pressure total: 315 ton Stroke: 350 mm Daylight: 540 mm Table surface area : 2.000 x 1.200 mm Nbpvd Ram surface area: 2.000 x 1.200 mm Required power: 65 kW Dimensions L x W x H: 4.400 x 2.950 x 4.800 mm Weight of machine approx.: 35 ton more
6
faceplate diameter 2.500 mm swing diameter 2.600 mm turning height 1.900 mm Control Sinumerik 840 D workpiece weight 15.000 kg turning speed range - faceplate 1,24 - 112 U/min vertical adjustment of the crossrail 1.500 mm crossrail -rapid travel 400 mm/min ram head swiveling +/- 35 ° ram head - cross travel 1.450 mm ram head - vertical travel 1.200 mm feeds 1 - 4.000 mm/min voltage 380 V frequency 50 Hz main drive motor 55 kW total power requirement 75 kW weight of the machine ca. ca. 38 t dime... more
9
Serial No. 9387-021078 Capacity 10' x 1.1/4" / 3048mm x 31.4mm Rolling or 10' x 7/8" / 3048mm x 22mm Pre Bending Length of rolls Top 123" / 3124mm, Bottom 122.1/4" / 3105mm Roll diameter 17" / 432mm Roll rise & fall Bottom Rolls 8" / 203mm by Power Input 400/440/3/50 ac 30 kW Actuated via Via Free Standing Console Fitted with Hydraulic Drop End & Section Bending Facility Equipment 10" / 254mm Spare Top Roll Length 26' / 7.92m Width 11' / 3.35m Height 9'6" / 2.9m Nett weight approx. 32 ton / 32,5... more
4
max. dia. of grinding wheel 200 mm 0 0,55 kW turning speeds 2800 U/min weight of the machine ca. 150 kg dimensions of the machine ca. 1,2 x 0,65 x 1,15 m Condition: ready for operation Electric 380 Volt Bbrk3hefra Well preserved double grinding block right with spiral drill grinding device in Shape of a grinding pad for drills up to approx. 30 mm, left with hand rest, Water drainage, prepared for coolant device. Machine dealer with own stock of 2500 m² and certification of the database "... more
2
Stainless steel work table-stable version tray-doppelseitiger table dimensions 2000 x 1800 x H 800 mm weight 120 kg Hh8qmqbd0 more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Gl0grllc3 GABBIANI [...] CNC Controlled Double End Tenoner;3,000 mm (118") Max. width and 235 mm (9-1/2") min., programmable motorized opening with LED readout. - Stations include: Jump scoring, Trim/hogging, (2) Stack tooling coping [...]: -- 120 mm (4.72") max. part thickness. -- 980 mm (38") Load area and increase to 83" with extensions in front of holddowns driven upper holddowns caterpillar type -- 235 mm (9-1/4") min. length, left side fixed right s... more


double ended
daily

New machines via email!

Stay updated!

to

to

Edit search
DOUBLE ENDED
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close