Used Elektromotor 110 Kw 2965 U Min B3 B5 for sale (67,715)

Condition: used, Electric motor, three-phase motor -shaft output on both sides -Power: 4 kW -Speed: 1435 rpm -Shaft: Ø 28 x 130 mm -Shaft: Ø 30 x 95 mm -Construction: B3 -Dimensions: 600/380/H420 mm -Weight: 80 kg Djdpfx Asdvil Togcola

Condition: used, Three-phase motor, electric motor -Power: 4.4 kW -Speed: 1420 rpm -Shaft: Ø 28 mm -Construction: B3 Dodpfxscun Rge Agcsla -Protection class: IP 33 -Dimensions: 410/390/H300 mm -Weight: 68 kg

Condition: used, Electric motor, three-phase motor, electric motor Dedpfx Aod Inw Sogcjla -Power. 18.5 kW -Speed: approx. 3000 rpm -Shaft: Ø 42 x 105 mm -Construction: B3 -Dimensions: 640/440/H325 mm -Weight: 144 kg

Condition: used, Three-phase motor, electric motor -Power: 7 kW -Speed: 1900 rpm Dlsdpfx Agscwn Hajcea -Shaft: Ø 38 mm -Construction: B3 -Protection class: - -Dimensions: 410/275/H330 mm -Weight: 40 kg

Condition: good (used), Flat gear motor, geared motor, electric motor, electric geared motor, adjustable geared motor, variable speed geared motor -Brake: dismantled -Manufacturer: Nord, adjustable gear motor -Type SK 42 F-R210 U-112 M/4 BRE -Speed: 14.5-109 rpm -Engine: Type SK 112 M/4 BRE60 -Power: 4.0 kW -Protection class: IP54 -Shaft: Ø 45 x 90 mm Dsdswl Uxlspfx Agcsla -Brake: 60 Nm -Dimensions: 840/580/H285 mm -Weight: 105 kg

Condition: ready for operation (used), , used, slight signs of wear, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Dljdpfx Aextwb Asgcoa

Condition: good (used), Year of construction: 2016, functionality: fully functional, cooling capacity: 123 kW (167.23 HP), type of cooling: air, overall weight: 1,012 kg, total width: 1,200 mm, total length: 2,960 mm, total height: 2,000 mm, warranty duration: 6 months, Aircooled chiller RC GROUP PYXIS U 128 P2 S U3 123 KW Cooling capacity: 123 kW / 34.97 tons (12/7 — 35°C) Year of manufacture: 2016 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 2 pcs. Copeland ZP295KCE-TWD-522 (scroll) Type of refrigerant: R410а Number of fans: 2 pcs. (Frequency inverter) Dimensions: 2.96x1.2x2 m. Weight: 1012 kg. Dsdpfx Aoxzznvogcjla Condition: Good

Condition: good (used), power: 110 kW (149.56 HP), fuel type: diesel, color: yellow, first registration: 01/2015, Year of construction: 2015, operating hours: 13,739 h, Liebherr A916 - 110 KW - Central Greasing - Camera Year: 2015 Hours: 13,739 110 KW engine Central greasing system Camera system = Further information = Model year: 2015 Drive: Wheeled Engine displacement: 4,580 cc Dsdpsxxavajfx Agcsla GVW: 18,000 kg Technical condition: good Optical condition: good Please contact VAEX The Truck Traders for further information.

Condition: new, axle configuration: > 3 axles, total length: 9,300 mm, total width: 2,540 mm, suspension: air, tire size: 245/70 R17.5, wheelbase: 1,360 mm, color: blue, Year of construction: 2023, Equipment: tail-lift, Colour: Blue Payload: 54,465 kg Main Features: Manufacturer: Faymonville Model: MAX 110-Z-4AA-9.30-U Chassis Number: YAMT14XX4N0107629 Year of Manufacture: New and unused (2023) Weights / Payload: - King-pin load: 23,000 kg - Axle load: 12,000 kg - Total axle load: 48,000 kg - Gross vehicle weight (GVW): 71,000 kg - Unladen weight: 16,535 kg - Payload: 54,465 kg Axles: - Axle make: BPW - Hydraulic steering - Pneumatic suspension with lifting/lowering valve - WABCO brake system - Tyres: 245/70 R17.5 – Michelin (Load index: 146/146 F) - 1st axle liftable Dimensions: - Load length: 9,300 mm - Extensions: 6,500 + 6,800 mm - Load platform width: 2,540 mm - Load height: 900 mm Additional Information: - Double-extendable loading platform - Container locks - Width outriggers + wooden outriggers for extension - Lashing rings - Pair of double-folding loading ramps - Central lubrication - 1x spare wheel with holder - JOST landing gear - 24 Volt electrical system - 2.0'' king-pin - One galvanised steel front wall - Electrically driven hydraulic pump - Manual steering - Twist locks = Further Information = General Information Year of manufacture: 2023 Axle configuration Tyre size: 245/70 R17.5 Dljdpouu Hcfofx Agcja Suspension: Air suspension Rear axle 1: Twin tyres; Lift axle; Max. axle load: 12,000 kg; Steered; Axle make: BPW; Tyre tread left inner: 100%; Tyre tread left outer: 100%; Tyre tread right inner: 100%; Tyre tread right outer: 100% Rear axle 2: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inner: 100%; Tyre tread left outer: 100%; Tyre tread right inner: 100%; Tyre tread right outer: 100% Rear axle 3: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inner: 100%; Tyre tread left outer: 100%; Tyre tread right inner: 100%; Tyre tread right outer: 100% Rear axle 4: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inner: 100%; Tyre tread left outer: 100%; Tyre tread right inner: 100%; Tyre tread right outer: 100% Weights Unladen weight: 16,535 kg Payload: 54,465 kg Gross vehicle weight: 71,000 kg Functionality Load platform height: 655.35 mm (Note: Please verify source, as figure seems inconsistent) Extendable body: Yes Condition General condition: Very good Technical condition: Very good Optical condition: Very good Financial Information Price: On request Further Information Please contact Stefan Schaapveld for more information.

Condition: excellent (used), Year of construction: 2012, operating hours: 106,362 h, functionality: fully functional, Premium screw compressor Atlas Copco GA110VSD. Year of manufacture 2012. New stage at 50,000 hours. With WRG. 8.50 bar with 20.70 m3/min. Dedeul U Tyepfx Agcjla

Condition: like new (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: 989354, power: 90 kW (122.37 HP), rotational speed (min.): 1,482 rpm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 470 kg, protection type (IP code): IP55, For sale: LEROY SOMER electric motor, 90 kW, with SCHNEIDER ALTIVAR 110 kW frequency inverter and circuit breaker (can be sold separately). These devices were mounted on a FEVI fan and operated for about 1 year—condition is like new. (€2,500 for the motor, €5,500 for the inverter, or €7,000 for the complete package – price excl. VAT). Technical manuals for both devices are available. Dlsdpjxrdqhofx Agcja

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, input current: 238 A, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. Dsdpfx Agovf E Avjcela The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: good (used), Electric motor, three-phase motor for gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer: Demag, crane motor unfortunately without type designation -Power: kW -Speed: 1485 rpm -Shaft: Ø 24 x025 mm -Design: B14 -Dimensions: 370/180/H250 mm -Weight 19.8 kg Dedpfsxc Eiyjx Agcsla

Condition: used, machine/vehicle number: 07040478, Electric Motor AC Motoren GmbH Type AH 315 MA-4 400/690V 50Hz 132 kW 1485 RPM 440 60Hz 158 kW 1782 RPM 228A Dodpsc Sqvlofx Agcola IP55 Complete with cooler make Wistro 380-500V 50/60Hz 255/370W

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: MA0120, screw compressor ALMIG BELT 30 with 10 bar Aircontrol Basic control Year of construction: 2021 Operating hours: 0 h Dedpsxd T Nwjfx Agcsla Technical specifications Type: BELT 30 Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Appendix C: 4.12 m³ / min Degree of protection / insulation class drive motor: IP 55 / F Nominal power drive motor: 30 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 part 13): 76 dB (A) Length: 1270 mm Width: 890 mm Height: 1190 mm Weight: 560 kg Compressed air connection: G 1 1/2" Delivery time on request. Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: good (used), Year of construction: 2011, Item: M-8698-Busch-Vacuum pump 75 kW Used Vacuum Pump Busch, Type WT0730AMX Dlsdpfjnnz Rpjx Agcoa MAX. Vol: 73 m3/min Motor: Høyer Motors Denmark 75 kW Year: 02-2011

Condition: excellent (used), Year of construction: 2003, This Haul-off saw from our renowned brand SICA S.p.a. is in machine storage at Plastima Used Machinery. The saw is from 2003 and is in used but good condition. Dljdjtphp Iopfx Agcsa Brand: SICA S.p.A. Model: TRS/U 110-800 Year of construction: 2003 Power: 5.5 kW Pipe outer diameter max: 110 up to 800 mm

Condition: good (used), screw conveyor, transport screw, screw conveyor, conveyor technology, tubular screw conveyor, trough screw conveyor, trough screw conveyor -Conveyor screw: Conveyor length: approx. 2500 mm -Design: stable -Drive motor: EM Marelli 1.5 kW -Gearbox: Rossi -Speed: 24 - 200 rpm -Conveyor screw: Ø approx. 240 mm -Conveyor screw pitch: 230 mm -Inlet/Outlet: 255 x 225 mm -Dimensions: see technical drawing in the photos -Transport dimensions: 3380/600/H670 mm -Weight: 310 kg Dsdpfswna Rlox Agcsla

Condition: used, Year of construction: 2023, operating hours: 448 h, machine/vehicle number: H2300010, power: 4 kW (5.44 HP), pressure (min.): 10 bar, used piston compressor available immediately: ALMIG HLA-15-10 (10 bar) The compressor has 43 operating hour and is available immediately. 3 cylinders Pressure: 10 bar Rated power: 11.0 kW Delivery quantity at 7 bar: 1220 l / min Dledpfjxc H R Ejx Agcja Compressed air outlet: 3/4 " Dimensions length x width x height: 1450 x 710 x 830 mm Visit our store. We always have a large selection of new and used compressors in stock! Immediately available.

Condition: good (used), Geared motor, electric motor, electric geared motor Dledpeptf Iaefx Agcsa -Manufacturer: Stephan Werke, gear motor -Speed: approx. 110 rpm -Engine: Type ZD434 -Power: 2.2 kW 1430 rpm -Design: B3 -Protection class: P 33 / E -Number: 1x motor available -Price: per piece -Dimensions: 640/270/H295 mm -Weight: 64 kg/piece

Condition: used, Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower -Manufacturer: Karl Klein, blower radial fan type DNG 6-18 L -Engine power: 0.155 kW -Speed: 1400 rpm -Volume output: 18.5 m³/min -Fan wheel: Ø 160 x 80 mm Dlsdpsuqf Ufjfx Agcoa -Connection input: Ø 145 mm -Connection output: 120 x 110 mm -Number: 3x blowers available -Price: per piece -Dimensions: 370/340/H320 mm -Weight: 8.1 kg/piece

Condition: used, Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower Dlsdpfsun Dv Njx Agcoa -Manufacturer: Meidinger, blower radial fan with support frame -Engine power: 0.55 kW -Speed: 2850 rpm -Volume output: 42 m³/min -Protection class: IP 44 -Fan wheel: Ø 300 x 110 mm -Connection input: Ø 190 mm -Connection output: Ø 190 mm -Dimensions: 630/530/H560mm -Weight: 48 kg

Condition: used, Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower -Manufacturer: Karl Klein, blower radial fan type DNG 6-18 -Engine power: 0.155 kW Dsdpfxoun Dwgs Agcela -Speed: 1400 rpm -Volume output: 18.5 m³/min -Fan wheel: Ø 165 x 80 mm -Connection input: Ø 145 mm -Connection output: 120 x 108 mm -Dimensions: 370/365/H310mm -Weight: 8.2 kg

Year of construction: 2011, condition: used, Temperature control unit, heating, hot water boiler, hydronic system, hydraulic station for high pressure cleaner, high pressure pump -Temperature control units for: water -electric heating for: pressure washer, high pressure pump Dsdpfxeqw D Dpo Agcola -Manufacturer: Frigotrol -Type: S-TT 50/108-D -Power: 110 kW -Connection: -permissible operating pressure: 6 bar -Dimensions: 1548/890/H1630 mm -Weight: 380 kg

Condition: used, High-pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan -Motor power: 1.1 kW -Speed: 2870 rpm -Volume output: m³/h -Pressure increase: Pa Dledpjdz Umiefx Agcsa -Connection inlet: Ø 270 mm (without nozzle) -Connection output: 100 x 140 mm -Number: 1x fan available -Price: per piece -Dimensions: 540/400/H775 mm -Weight: 40.5 kg