Koelle adh 50 buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
6

sourface and thikness planer Koelle ADH50

Egenhofen / Herrnzell Germany
6809 km
1985
USED
Type: ADH50 secondhand machine working width 510mm Surface planer: 2200mm Max about 220mm thickness planer 4 knifes Siral Leitz 3 feed speeds Bsqsrb2a feed roller: steel roller excerpt: steehl electric table stroke motor power: 5,5kW year of construction: 1985 Location: Warehouse / 82281 Herrnzell more
6
Planer - Thicknesser Kölle ADH 50 For the highest demands in the proven Kölle system Planing width 500 mm Planing height 230 mm Largest chip removal during dressing 5 mm for the thickness Planer 8 mm Task table 1200 mm decrease table 1000 mm Thicknessing table 1000 mm with adjustable sliding roller for secure workpiece feeding, in 4-times special guide tip over led Leitz-spiral cutterhead with 2 disposable blades, speed 5000 RPM (low noise) Knives shaft lock for safe blade changing 9... more
6
Fixed width set up Kölle ADH 50-gebraucht- Table opening up towards the rear, TERSA Planer shaft, rubber pull-out roller Ey9pw7r -Technical data- Planing width: 510 mm, length: 2,200 mm, maximum chip removal: 4 mm, diameter drum: 120 mm, number of knives: 4 piece, Swivel range dressing: 45/90 °, clearance height: 230 mm, feed speed: 6/9/18 m / min., dust nozzle: 160 mm, power: 7,5 kW Quality - info This machine is factory tested! -A - excerpt reel checked and adjusted - complet... more
6

sourface planer Koelle AH50

Egenhofen / Herrnzell Germany
6809 km
1985
USED
Type: AH50 used machine working width: 510 mm Twuxdocd Surface planer table: 2600 mm 4-blade-shaft table lips slit Motor Power 5,5kW Year of construction: 1985 Location: Warehouse / 82281 Herrnzell more
3
8 KW engine, 6 speed 3000/4000/5000/6000/10000 rpm,. Pole-reversible motor, RS-LS run, Table size 2200x800mm, shaper fence with cast iron jaws, Handwheel adjustment for Shaper fence, numeric display for stop baking Milling spindle 30mm, height adjustment spindle Handwheel with numeric display 9kb3vjq9j Centrex parts Guide more
6

surface planer Koelle AH50

Egenhofen / Herrnzell Germany
6809 km
1999
USED
Type: AH50 used machine working width: 500 mm Table adjustment: hydraulic Surface planer table: 2800 mm 4-blade-shaft-Tersa engine brake table lips slit Toblb8ahi Motor Power 5,5kW Year of construction: 1999 Location: Warehouse / 82281 Herrnzell more
4

Tischfräse Koelle F50

Egenhofen / Herrnzell Germany
6809 km
1975
USED
Type: F50 Second-hand machine Engine capacity: 4/6 kW Spindle diameter: 30 mm Table size: 1118 mm x 800 mm Motor brake Rpm: 3000/4000/5000/6000/8000/10000 RPM. Year: circa 1975 Ltaep Location: Camp / 82281 Herrnzell more
6

Tischfräse Koelle F50

Egenhofen / Herrnzell Germany
6809 km
1987
USED
Type: F50 Second-hand machine Engine capacity: 4/6 kW Tw8tg28in Spindle diameter: 30 mm Table size: 1118 mm x 800 mm Motor brake automatically Rpm: 3000/4000/5000/6000/8000/10000 RPM. Year of construction: 1987 Location: Camp / 82281 Herrnzell more
4
Kölle Thicknesser type DH50 Planing width 500 mm Planing height 230 mm Tersamesserwelle 4 knife Greatest depth 8 mm 9cpmepmrr 5.5 KW Electrical height adjustment Feed speeds 4 + 6 + 12 m / minute Weight approx. 820 kg more
6
Svecia 50 M Electric Adhesive sticker slitting machine Ehugvsnbk Max. size aprox. : 55 cm more


koelle adh...
every day

New machines via email!

Be informed!
6
Label printer labels with adhesive device J7j37mys2 more
6
400 V 1st level: 4 KW 2nd level: 6 KW Gjg27z8f total: 13 KW Temp. Max.: 210 ° C Maximum operating pressure: 10 bar more
4
Adhesive binding machine Faelzelgeraet Thermobinder brand: PLANAX Type: Planatol 1150 220 volt 50 Hz 850 Watt Stcsvhcy Dimensions H x W x D: approx. 38 x 88 x 45 cm • Block thickness of 60 mm • Bandage length of 380 mm • Heating time approx. 10-15 min • Setting performance up to 180 copies per hour Machine in the serviceable, according to age-good condition. Machine is sold without warranty or guarantee. You can visit the machine in 75334 Straubenhardt, d 11 and t... more
1
Arm length 1150 mm F08ncwy7u Feed speed ab. 10 – 30 m/min. Veneer thickness ab. 0,3 – 3 mm Total electric capacity ab. 1,5 kW Weight ab. 600 kg more
1
Elect./Voltage: 240 V, 60 Cy, 3 Ph. Ieifpxj NORDSON - 5550, [...] Adhesive [...] melt & pump moisture-curing of Polyurethanes and other high-performance thermoplastic materials directly from straight-sided 55-gal. shipping drums. -- Engineered for reactive materials; closed system design to prevent adhesive from curing prematurely. -- Features: Auto. startup to prevent cold-start damage to the pump; solid-state digital temperature control for individual application set-point control of pla... more
3

drilling-machine ERD 50/60

Borken-Burlo Germany
6354 km
USED
stable stand drill ERD 50/60 2oq2nm Drilling capacity 6-50 mm in St60 recording: MK 5 automatic feed spindle speeds: 40-620 RPM. more
5
faceplate diameter 4500 mm swing diameter 5000 mm turning height 2400 mm workpiece weight max. 70.000 kg no. of the slides 2 max. ram stroke 1600 mm faceplate turning speed range 0,3 - 32 U/min Anzahl der Drehzahlstufen 4 Control NUM 1060 3se2qrbm total power requirement 180 kW weight of the machine ca. 145 t dimensions of the machine ca. 6,6 x 11,4 x8,4 m Maschine has been overhauled with for example new Motors and new electric / cables and CNC Control equipped with: - 2 rams (swivable) ... more
6
2p8lldltyReversing tensioner with part head Construction type Type 200500 pitch 24 No. 1050 Was on the Donau rapid radial drilling machine more
1
table length 1200 mm Vlyiq2w table width 1200 mm table height (lateral area) 100 mm weight 227 kg more
3

Toolholder UNBEKANNT ISO 50

Mönchengladbach Germany
6364 km
USED
tool clamping area:ISO 50 mm weight:0,2 t I9ddd2l - palette with 57 SK 50 NC arbors, system KAISER (DIN 69871 AD) with drawings knobs and coolant through center, partly with knife heads and other cutters. more
1
offer slitter knives, replacement blade for BBM 2550 x 4 mm plate shear 4 pieces Upper and lower knife 1 x polished Dimensions: 16 x 57 x 1,275 mm Ly2wnofq Holes M16 (7 units) Hole spacing 190 mm may also fit other scissors 2 sets available more
6
x-travel 2x 500 mm y-travel 380 mm z-travel 380 mm control MillPlus Main spindle: turning speed range - main spindle 20 - 8.000 min/-1 power capacity - main spindel 15 kW tool taper ISO 40 DIN 69871 AD work table: NC-Tilting round table: Ø 500 x 380 mm Swivel range 0 - 180 ° rotatable 360 ° input unit 0,001 ° table turning speeds 18 min/-1 T-slot - distance 63 mm T-slot - width 14H7 mm center hole 30H7 mm max. table load 200 kg fix-table: 800 x 480 mm T-slot - distance 63 mm T-slot - width... more
6
Vehicle data - make: Toyota - type: 52-8FDF20 / / 809 h / HH 4500 mm / 3 valve - drive type: diesel - carrying capacity: 2000 kg - load Centre of gravity:-lifting height: 4500 mm - range: 0 mm - year: 2011 - operating hours: 809 - internal No.: C0453 _____ 9zw2ujt3i Mast data - mast type: standard - height: 4500 mm - height: 2850 mm - free lift: 0 mm - carriage: 0 mm - forks: 1200 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 2850 mm -... more
3
Bosch pressure switch 0 821 100 011 0.2..3 bar max. 250 V, used, good condition, 100% functional, included with com. photos 9irrkqw7b more
6
x-travel 800 mm y-travel 500 mm z-travel 450 mm control FAGOR 8055 MC table: 530 x 900 mm spindle taper ISO 40 ISO/MAS-BT turning speeds 60 - 3000 U/min workpiece weight 900 kg quill stroke 80 mm feed - longitudinal/cross 1 - 5000 mm/min feeds - vertical 1 - 3000 mm/min rapid traverse: longitudinal and cross 10000 mm/min rapid traverse: vertical 6000 mm/min total power requirement 5,5 kW weight of the machine ca. 3,6 t dimensions of the machine ca. 2,8 x 3 x 2,2 m Condition: good Electric 3... more
6
greates pass round over bed 1470 mm turning length 6500 mm control Sinumerik 840 D SIEMENS Swing dia. over traverse guideway 1580 mm Zahlp9syb z-travel 6870 mm x-travel 1120 mm Main spindle: Max. rpm 1000 U/min power capacity - main spindel 90 kW max. Torque 10248 Nm spindle head B20 (DIN 55026) spindle diameter in front bearing 320 mm spindle bore 245 mm C-Axis 0,001 ° C-axis turning speed range 12,5 U/min Torque C-Axis max. 6.000 Nm Milling Spindle: turning speeds max. 3.200 U/min power c... more
6
Deburring machine Indumasch KF 500 Table design adjustable angle of 15 ° to 45 ° 380 V Fqmk03z9i more
4
-Table length 2500 mm -Grinding table depth 900 mm -motorized table hub -Right / left rotation -CE compliant Available from week 51-2017! 93rrzdvus more
6
Vehicle data - make: Nissan - type: Q02L25CU / / triplex / HH 4750 mm / FH 1320 mm - type of drive: electric - load capacity: 2500 kg - load Centre of gravity:-lifting height: 4750 mm - range: 0 mm - year: 2000 - operating hours: 9025 - internal No.: C0409 _____ Mast data - mast type: triplex - lifting height: 4750 mm - height: 2150 mm - free lift: 1320 mm - carriage: 0 mm - forks: 1200 x 0 x 0 mm _ 9rvz3ubjx Dimensions - length: 0 mm - width: 0 mm - h... more
3
Bosch ASM 50 TA servo module 053060-202, serial number according to the photo, used, normal wear, 100% functional B0q3ffpm more
6
internal diameter 150 mm grinding depth 300 mm swing diameter 300 mm distance spindle - grinder max. 850 mm min. dia. 10 mm swivability of the grinding spindle head +/- 90 ° Jb9dkodrq spindle speeds 8 / 19-480 UpM taper in spindle headstock MK 4 table movement stepless 0,1 - 7 m / Min. total power requirement 5,5 kW weight of the machine ca. 3,2 t dimensions of the machine ca. 3,02 x 1,7 x 1,75 m Condition: ready for operation Electric 380 Volt chuck Forkhardt F 250 Grinding spindle 2 x... more
6
groove width 125 mm drawing length 1250 mm pulling force - max. 5 t stroke length max. 925 mm table surface area 550 x 700 mm workpiece weight 6000 kg cutting speed 1 - 12 m/min return speed 2 - 24 m/min feed 0,219 mm/DH total power requirement ca. 5 kW weight of the machine ca. 4 t dimensions of the machine ca. 1,5 x 1,5 x 3 m - quick adjustment for the Feed - automatic return adjustment - Oil Tank with pump Gaaemc0i - 3 Tool Cabinets - large set of toolings + accessories Tools for drawing... more
6

circular saw MEP Tiger 350

Borken-Burlo Germany
6354 km
USED
1 used metal cutting saw-3 m feeder roller -approx. 3 m length stop 2 speeds Blade dimensions: 350 x 32 x 2.5 mm Cutting area around at 90°: 115 mm flat: 180 x 95 mm 22te7n70v Weight: approx. 450 kg Dimensions approx. 800 x 700 x 1600 mm more
5
turning diameter 1250 mm swing diameter 1250 mm turning height 1000 mm x-axis 1330 mm z-axis 800 mm turning speeds 1000 U/min workpiece weight 3000 kg rapid traverse 12 m/min main drive motor 63 bei 100% kW distance spindle head - tool holder 1485 mm control SIEMENS 840C rapid traverse 12 m/min feeds of compound slide-rest 10 - 12000 mm/min total power requirement 95 kW Ht88zjrn0 weight of the machine ca. 20 t dimensions of the machine ca. 5,1 x 3,8 x 3,4 m - CNC control SIEMENS 840C - 1 ve... more
4
Vehicle data - make: BT - type: SWE 200 D / / initial lifting plateau HH 2050 mm - type of drive: electric - load capacity: 1000 kg - load Centre of gravity:-lifting height: 2050 mm - range: 0 mm - year: 2010 - hours of operation: 6155 - internal No.: A0170 _ _____ Mast data - mast type: standard - height: 2050 mm - height: 1550 mm - free lift: 0 mm - carriage: 0 mm - forks: 1150 x 180 x 60 mm _ Rrsqgw3 Dimensions - length: 1997 mm - width: 840 mm - height: ... more
3
AEG Minisemi 380/50 + GK + NCA 029.037 140, used, normal wear, 100% functional 9fhf338if more
4
grinding length 375 mm grinding width 175 mm workpiece height 350 mm table surface area 365 x 150 mm grinding wheel size 180 x 13 mm grinding wheel hole diameter 31,75 mm distance spindle center to table 400 mm spindle turning speed range 3000 U/min dust exhaust 0,4 kW Ue9hmnu grinding wheel motor 0,75 kW weight of the machine ca. 400 kg dimensions of the machine ca. 1,2 x 0,950 x 1,76 m Condition: ready for operation Electric 380 Volt Permanent magnetic plate 350 x 150 mm Cooling equipme... more
2
Machine KNORR stack lift L-450-1 W 9yxxk83hz more
3
Used MOLLART Drillsprint LD1 750 Deep hole drilling machine CNC Control Fanuc Powermate '35 iB’ 1 Spindel Maximum Drilling Depth 750mm Maximum Component Length 850mm Ø2mm to Ø25 mm On-line or off-centre drilling Counter-rotation for improved straightness Mbxyuzo A.C. Spindle Motor Power 7.5kW Continuous Spindle Speed Range 0 - 6,000 RPM Drill Feed Range 0 - 1000mm/min Rapid Traverse Speed 10m/min Floor Area of Machine 3000 x 1500mm more
5
saw blade diameter max.  450 mm El7gtctfa bar loading magazine additional information to follow more
6
Vehicle data - make: Jungheinrich - type: EFG D16 / / 1320 h / HH 4500 mm / triplex / Sideshift - drive type: electric - load capacity: 1600 kg - load Centre of gravity:-lifting height: 4500 mm - range: 0 mm - year: 1990 - hours of operation: 1320 - I internal No.: C0408 _ 9rvztc2vw Mast data - mast type: triplex - lifting height: 4500 mm - height: 2040 mm - free lift: 1600 mm - carriage: 0 mm - forks: 1150 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 2040 mm - weight: 3... more
3
AEG Minisemi 380/50 + GK + NCA 029.037 140, used, normal wear, 100% functional 9fhggod3g more
6
x-travel 8000 mm y-travel 2500 mm M3d28q89f workpiece height 2360 mm table width 2240 mm table length 10100 mm weight of the machine ca. 110 t dimensions of the machine ca. 20x8,5x5,2 m more
6
IntNr.: 4846 * Device details: * Load capacity: 5000 kg Lifting height: 3100 mm Egeh2k9im Free lift: 1500 mm Mast type: Duplex mast height: 2400 mm Length/width/height: 3100 / 1430 / 2370 mm Operating weight: 6485 kg * Equipment: * * Protection umbrella * 3rd valve * 4 valve * Full cab * Full free lift * Soot filter * Heating * Working lights front * Working light rear * Attachments: * * Side-shift * Tine adjuster Fuel filter replaced Replaced heater valve Replaced ... more
6
turning diameter max. 475 mm turning length 1.330 mm control Manual Plus greates pass round over bed 475 mm 8ukduvz3u Swing dia. over traverse guideway 260 mm Distance between centres 1.500 mm slide travel X-axis 260 mm slide travel Z-axis ca. 1.350 mm Main spindle: turning speed range - main spindle 1 - 3.000 min/-1 power capacity - main spindel 22 / 15 kW spindle diameter in front bearing 115 mm spindle bore 78 mm max. chucking diameter 250 mm tool clamping MultiFix B turning tool - shaft... more
3
working width max. 3,020 mm material thickness 13 mm at 40 N/mm² Xp7ai7q9 cutting angle adjustment cutting gap adjustment positioning control for backgauge front angular stop backgauge defective - worn out electrical data 380V / 23.5 KW space requirements length - 3,800 x depth - 2,600 x height - 2,250 mm weight approx. 13,500 kg   more
3
Vehicle data - brand: BT - type: LPE 250 / 3580 h BJ 2015 / 1600 mm forks - drive type: electric - load capacity: 2500 kg - load Centre of gravity:-lifting height: 0 mm - range: 0 mm - year: 2015 - operating hours: 3580 - internal No.: C0221 _ Mast data - mast type:-lifting height: 0 mm - height: 1550 mm - free lift: 0 mm - carriage: 0 mm - forks: 1600 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 1550 mm - weight: 1225 kg _ Czls792jg Battery & charger - battery voltag... more
3
AEG MS350-0000-000 permanent magnet AC servo motor, pitch of holes: 71 x 71 mm, Ø shaft: 14 mm, normal wear, 100% functional used, 8swzhv7en more


koelle adh...
every day

New machines via email!

Be informed!

to

to

Change search
KOELLE ADH 50
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.