Used Zeulenroda for sale (50)

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, total height: 27,500 mm, total width: 10,500 mm, total length: 16,500 mm, pressing force: 25 t, table width: 630 mm, table length: 500 mm, operating speed: 100 mm/s, overall weight: 2,200 kg, reverse speed: 450 mm/s, ram plate width: 450 mm, ram plate length: 360 mm, die cushion stroke: 160 mm, clearance between the columns: 800 mm, stroke length: 500 mm, power: 8.75 kW (11.90 HP), Hydraulic press PYE 25 S1M. Year of manufacture: 1990. Manufacturer: VEB Wema Zeulenroda (Germany). Specifications: Maximum pressing force: 25 tons. Operating pressure: 16 MPa. Upper table: 450 x 360 mm. Lower table: 630 x 500 mm. Fpedjtzwxdopfx Ah Ujp Clear opening: 800 mm. Cylinder stroke: 500 mm. Downward speed: 100 mm/sec. Upward speed: 450 mm/sec. Power requirement: 8.75 kW. Weight: 2200 kg. Height: 2750 mm, Length: 1650 mm, Width: 1050 mm. Machine is in very good technical condition. Fully overhauled. Inspection and test run under power possible on site.

Condition: ready for operation (used), Nominal force: 2500kN, operating pressure: 20MPa, ram speed down/up: 210/110mm/s, ram stroke: 500mm, throat depth: 360mm, max. distance between table and ram: 800mm, rated current: 41A, control voltage: 60V, rated voltage: 380V, connected load: 20.5kW, weight: 8t. An on-site inspection is possible. Fpjdpfx Ahexcx Aaj Uop

Condition: used, Double-column hydraulic press RASTER ZEULENRODA (WALTER) Type WUP-S 60 Mach. No. 707, built in 1994 Pressure capacity 60 tons Column width 1090 mm Side clearance 275 mm Ram surface 890 x 540 mm Table surface 990 x 540 mm Max. ram stroke 300 mm Installation height 390 mm Table height above floor 900 mm Hydraulic operating pressure 250 bar Rapid downward speed 47 mm/s Rapid upward speed 75 mm/s Working speed 15 mm/s Return speed 37 mm/s Motor power 15 kW (2 x 7.5 kW) Power supply 400 volts, 50 Hz, 15.85 kW - SICK light barrier, type LVS 600 - Manually adjustable limit switch cams for stroke limitation - Press force adjustment via handwheel - Continuous press force holding time adjustment - Two-hand operation on the machine - Additional ram plate Guided by two lateral guide rods, Ø 50 mm - Table top with 18 mm T-slots, slot spacing 185 mm - Table top through hole Ø 100 with insert reduction to Ø 30 mm - Ram plate with 40 mm bore and clamping screw - Electrical cabinet on the side of the machine stand - 3 monitored safety valves for the hydraulic system - Accident prevention regulations for manual insertion work - Electrical circuit diagram Space requirement L x W x H 1900 x 1350 x 2570 mm Fedpfx Aov Srfdoh Uspp Weight 3.1 tons Good condition

Condition: refurbished (used), RETROFIT complete Pressing force: 1600 kN Installation height: 800 mm Stroke: 500 mm Table: 900 x 630 mm Ram: 750 x 450 mm Throat depth: 360 mm Downward speed: 200 mm Upward speed: 125 mm Machine height: approx. 3,500 mm Weight: approx. 7,000 kg Connection: 17 kW Fodpfx Aew S Uazsh Uspp - a complete retrofit kit for unrestricted manual loading and unloading compliant with EC directives and CE equipment requirements, - new control cabinet with certified two-channel electronic PLC safety controller from Siemens (1512SP F or 1515F) for process control, featuring integrated control panel for the operating modes: setup with two-hand control, single stroke with two-hand control, and foot operation (only in combination with BWS); manual lever operation is no longer possible, - hydraulic safety block for monitoring the closing movement of the main cylinder, - position-monitored directional valve for the up and down movement of the ram of the main cylinder, - two-hand control device with two-channel monitoring of the two-hand synchronization at the press table (incl. 5m cable), - replacement of main and control pump motors, - replacement of seals on the main cylinder, - fine filter with contamination indicator, - the press is equipped with an electronic position measurement system (including teach-in function and display of the current ram position), eliminating the need for a mechanical cam switch. Main control panel integrated into the control cabinet (mounted on the right side of the machine): - 12" touch panel - Control buttons and switches for operating modes and drives - USB interface for data exchange - Light curtain Option: Drawing cushion

Condition: ready for operation (used), C-frame Press, Hydraulic Press, PYE Press 3t, Used Machine Fpodsw Hc H Hjpfx Ah Ujp Manufacturer: VEB Wema Type: PYTE 3.15 Overall dimensions: 500 x 730 x 1170 mm Pressing force: 3.15 tons Stroke: 280 mm Table size: 280 x 280 mm Electrical data: 380 V; 1.5 kW; 4 A

Condition: good (used), Manufacturer: WMW Zeulenroda Type: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height 850 mm Thickness bolster plate 100 mm Throat C side 360 mm Specifications Metric US Standard Capacity 160,000 Table length 1,250 mm Table width 600 mm Ram stroke 500 mm Starting speed 100 mm/min Working speed 10 mm/min Return speed 125 mm/min Power Fjdpfxewp Nv Hs Ah Ujpp 22.5 kW Dimensions (Estimate) Length: 2,150 mm Width: 1,250 mm Height: 3,600 mm Weight: 7,500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent a warranty or contract terms. We recommend you check all important details.

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 068-071/270, throat depth: 150 mm, table width: 280 mm, table length: 280 mm, distance table to ram: 355 mm, stroke length: 280 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid requires timely collection between 28.07.2025 and 31.07.2025. TECHNICAL DETAILS Rated force: 3.15 Mp Operating pressure: 125 kp/cm² Upward speed: 100 mm/s Downward speed: 300 mm/s Ram stroke: 280 mm Throat: 150 mm Maximum distance between table and ram: 355 mm Table dimensions: 280 mm x 280 mm MACHINE DETAILS Dimensions: 750 mm x 630 mm x 1,700 mm Fpjdpfxswvh R Ao Ah Usp Weight: 750 kg Connected load: 1.5 kW Rated current: 3.8 A Operating voltage: 380 V / 50 Hz

Condition: used, Year of construction: 2001, machine/vehicle number: Z 293 - 040, For sale: used Raster Zeulenroda GHP 400 H/K-08 with a nominal force of 2x2000kN. Total weight: 32 tons. Rated current: 80A. Year of manufacture: 2001. Available from 08/2025. Fsdpjwzkgwofx Ah Uepp

Condition: used, Year of construction: 1986, pressure 160 t throat 360 mm stroke 500 mm feed down 200 mm/sec feed up 125 mm/sec max. distance table - ram 1000 mm Fpodpfx Aov Rgwxeh Uop table surface area 900 x 630 mm ram surface 850 x 450 mm clamping pivot 50 H7 / 85 mm total power requirement 17 kW weight of the machine ca. 7 t dimensions of the machine ca. BxTxH 1,25 x 2,2 x 3,45 m

Condition: used, Year of construction: 1998, pressure 40 t Fodpsvnwfnjfx Ah Uopp stroke 250 mm total power requirement 6 kW weight of the machine ca. 3 t distance between columns 600/350mm mm table surface area 860x620 mm ram surface 860x620 mm table height 900 mm

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, total height: 2,350 mm, total width: 1,000 mm, total length: 1,300 mm, pressing force: 10 t, table width: 500 mm, table length: 400 mm, operating speed: 100 mm/s, overall weight: 1,300 kg, reverse speed: 450 mm/s, ram plate width: 360 mm, ram plate length: 280 mm, clearance between the columns: 630 mm, stroke length: 400 mm, Equipment: documentation/manual, Hydraulic press PYE 10 S/1M. Year of manufacture: 1983. Manufacturer: VEB Wema Zeulenroda (Germany). Specifications: Maximum pressing force: 10 tons. Operating pressure: 16 MPa. Upper table: 360 x 280 mm. Lower table: 500 x 400 mm. Clearance: 630 mm. Fodpfxowb Dhne Ah Uspp Ram stroke: 400 mm. Downward speed: 100 mm/sec. Upward speed: 450 mm/sec. Power requirement: 5.2 kW. Weight: 1300 kg. Height: 2350 mm, Length: 1300 mm, Width: 1000 mm. Machine in very good technical condition. Machine after complete overhaul.

Condition: used, pressure 10 t stroke 400 mm Fpjdpfx Ahjd R Szuj Usp feed down 200 mm/sec feed up 450 mm/sec max. distance table - ram 630 mm total power requirement 8,5 kW weight of the machine ca. 1,3 t dimensions of the machine ca. m

Condition: used, pressure 160 t throat 360 mm stroke 500 mm table surface area 1250x630 mm ram surface 1000x450 mm Fedpfxjlp U Hgo Ah Ujpp table height 1000 mm dayligth 800 mm weight of the machine ca. 8 t

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, total height: 31,500 mm, total width: 13,500 mm, total length: 17,500 mm, pressing force: 40 t, table width: 1,000 mm, table length: 500 mm, operating speed: 200 mm/s, overall weight: 3,200 kg, reverse speed: 450 mm/s, ram plate width: 450 mm, ram plate length: 380 mm, distance between stands: 800 mm, stroke length: 500 mm, power: 15 kW (20.39 HP), PYE 40 SS hydraulic press with ejector. Year of production 1975, manufacturer VEB Wema Zeulenroda (Germany). Machine after general overhaul. Replaced piston seal. Parameters: Maximum pressing force 40 tons. Working pressure 16 MPa. Upper table 380 x 450 mm. Lower table 500 x 1000 mm. Ground clearance 800 mm. Cylinder stroke 500 mm. Fjdpstzxtpofx Ah Uopp Down speed 200 mm/sec. Upward speed 450 mm/sec. Power requirement 15 kW. Weight 3200kg. Height 3150mm, Length 1750mm, Width 1150mm. Technical condition of the machine very good. The machine after a general overhaul. It is possible to make a visual inspection and check the machine in motion.

Condition: used, pressure 63 t throat 315 mm stroke 16 - 125 mm max. distance table - ram 417 mm ram adjustment 70 mm no. of strokes 80 Hub/min table surface area 800 x 630 mm ram surface 500 x 400 mm total power requirement 6 kW weight of the machine ca. 5 t Fpodpfxetqm Dqe Ah Ujp dimensions of the machine ca. 1,5 x 2,2 x 2,75 m

Condition: excellent (used), Year of construction: 1977, functionality: fully functional, total height: 27,500 mm, total width: 10,500 mm, total length: 16,500 mm, pressing force: 25 t, table width: 630 mm, table length: 500 mm, operating speed: 200 mm/s, overall weight: 2,400 kg, reverse speed: 450 mm/s, ram plate width: 450 mm, ram plate length: 360 mm, distance between stands: 800 mm, stroke length: 500 mm, power: 12.5 kW (17.00 HP), PYE 25 SS hydraulic press. Year of manufacture 1977. manufacturer VEB Wema Zeulenroda (Germany). Parameters: Maximum pressing force 25 tons. Working pressure 16 MPa. Upper table 450 x 360 mm. Lower table 630 x 500 mm. Ground clearance 800 mm. Cylinder stroke 500 mm. Down speed 200 mm/sec. Upward speed 450 mm/sec. Power requirement 12,5 kW. Fpjdpfx Aetzxvweh Usp Weight 2400kg. Height 2750mm, length 1650mm, width 1050mm. Technical condition of the machine very good. The machine after a general overhaul. It is possible to make a visual inspection and check the machine in motion.

Condition: used, pressure 63 t throat mm stroke 8 - 120 mm no. of strokes 135 Hub/min max. distance table - ram 560 mm ram adjustment 70 mm table surface area 800 x 600 mm ram surface 500 x 400 mm total power requirement 12 kW weight of the machine ca. 5,5 t dimensions of the machine ca. m Fpodstqm Daopfx Ah Usp

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, total height: 3,050 mm, total width: 1,750 mm, total length: 1,150 mm, pressing force: 40 t, table width: 630 mm, table length: 500 mm, operating speed: 100 mm/s, overall weight: 3,200 kg, reverse speed: 450 mm/s, ram plate width: 450 mm, ram plate length: 380 mm, distance between stands: 800 mm, stroke length: 500 mm, oil tank capacity: 300 l, Equipment: documentation/manual, Hydraulic press PYE 40 S1/M with ejector. Year of manufacture 1986. Manufacturer VEB Wema Zeulenroda (Germany). Machine after general overhaul. Piston seal replaced. Parameters: Maximum pressing force 40 tons. Working pressure 16 MPa. Upper table 380 x 450 mm. Lower table 500 x 630 mm. Clearance 800 mm. Cylinder stroke 500 mm. Down speed 100 mm/sec. Fedpfx Ahowbt Uqo Uspp Up speed 450 mm/sec. Ejector stroke 200 mm. Ejector force 16 tons. Power demand 13 kW. Weight 3180 kg. Height 3050mm, Length 1750mm, Width 1150mm. The technical condition of the machine is very good. The machine has been overhauled. It is possible to inspect and check the machine in motion.

Condition: used, pressure 100 t throat 355 mm stroke 8 - 130 mm table surface area 710 x 1200 mm T-slots at tabel 3 clamping plate thickness 75 mm no. of strokes 50/80 Hub/min ram adjustment 80 mm ram surface 450 x 560 mm T-slots at ram 2 tool shank hole (depth x diameter) 100 x 50 mm max. distance table - ram 540 mm distance between columns 400 mm connected load 11,5 kW Fjdjtqm Dhepfx Ah Ujpp weight of the machine ca. 9,0 t Overall size 1,65 x 2,25 x 3,05 mm - increased installation height - with die cushion - converted to safe control (Pilz PLC), safe for “hand inlay work”. on the open tool"

Condition: used, Year of construction: 1979, pressure 10 t throat 250 mm Fjdpfx Aewbizyjh Uspp stroke 400 mm feed down 100 mm/sec feed up 450 mm/sec max. distance table - ram 630 mm total power requirement 5,2 kW weight of the machine ca. 1,3 t

Condition: used, pressure 63 t throat - mm stroke 16 - 125 mm table-size 800 x 600 mm force 250 cutting surface 1600 mm² table adjustment range 220 mm total power requirement 6 kW weight of the machine ca. 5 t distance table/ram 562 mm press is to be dismantled and partially overhauled: - dismantling and checking - new colors - new control cabinet with ABB safety control and touch screen - current UVV test with brake time measurement and press test book Fjdpfoch Umcsx Ah Uepp - COnversion to safe operation

Year of construction: 1969, condition: used, pressure 63 t throat - mm stroke 16 - 125 mm table surface area 800 x 630 mm ram adjustment 70 mm no. of strokes im Dauerlauf 80 Hub/min Fsdpjh Dfctofx Ah Uspp max. distance table - ram 417 mm ram surface 500 x 400 mm clamping plate thickness 70 mm total power requirement 6 kW weight of the machine ca. 5,5 t dimensions of the machine ca. m

Condition: used, functionality: fully functional, Hydraulic Press VEB Zeulenroda PYE10N Used condition as shown in the pictures Fpsdpfxew S Ucce Ah Ujp All data can be found in the photo of the nameplate.

Condition: good (used), functionality: fully functional, total height: 2,700 mm, pressing force: 25 t, table width: 500 mm, table length: 500 mm, overall weight: 2,000 kg, distance table to ram: 800 mm, stroke length: 500 mm, Equipment: documentation/manual, Available for sale: 1 used hydraulic press Manufacturer: VEB Werkzeugfabrik Zeulenroda WMW Model: PYE25/1 Total weight: 2 t Nominal pressing force: 25 MP Ram stroke: 500 mm Maximum distance between table and ram: 800 mm Fedpfx Asxfzdleh Ujpp Table: 500 x 500 mm Documentation included

Condition: good (used), functionality: fully functional, total height: 2,950 mm, throat depth: 360 mm, pressing force: 100 t, table width: 560 mm, table length: 750 mm, overall weight: 5,000 kg, distance table to ram: 630 mm, Equipment: documentation/manual, For sale: 1 used hydraulic press Manufacturer: VEB WEMA Zeulenroda WMW Model: PYE100SS Total weight: 5 t Nominal pressing force: 100 MP Ram stroke: 500 mm Maximum distance between table and ram: 630 mm Table: 750 x 560 mm Two-hand operation and closed hydraulic system Fpedpfx Ajxfzc Ish Usp