Portal milling machine

Reichenbacher Hamuel Shape 2000 - 5 Achsen

Condition: used, Year of construction: 1999, Technical details: x-travel: 3 500 mm y-travel: 2 200 mm z-travel: 1 200 mm Bsgtivngvik c-axis: +/- 200° control: Heidenhain TNC 426 spindle rpm - counter clockwise:: max. 10000 spindle rpm - clockwise:: max. 10000 distance between columns: 2 500 mm distance spindle /table: vertical: 1230 mm clamping surface area: Tisch: 3000 x 2000 mm table load: 10 t tool taper: HSK A 63 feed:: X/Y/Z: max. 20 m/min. compressed air: 8 bar total power requirement: ca. 100 kW weight of the machine ca.: 40 000 kg dimensions of machine: 18,0 x 6,0 x 5,8 m 5 axis Portal Milling Machine 5-axis portal milling machine Milling spindle: make Hauser type HS 256A-01 Uni, speed max. 10.000 rpm. direct drive Milling head: make Hamül, fork type, A-axis integrated = angle of rotation +/- 110°. Tool changer: Hamül make, rotary indexing table type with rotary table, for 32 tool positions chip conveyor: 2 pieces hinged belt conveyor make DGS with water tank, insertion length 8.500mm make BKW type DL 55V-2KK, capacity 2,41 l/min.; (combined for oil- water mixture for oil and spindle cooling) Cooling lubricant system: belt filter make DGS type SBF 150 Operation: via control panel type Heidenhain LE 426 X-, Y- and Z-axis with Heidenhain measuring rods. manual control unit HR 410 hydraulic counterbalance (Z-axis) Equipment: Enclosure (protective walls with viewing windows and protective doors) hydraulic system working area lighting *

Condition: ready for operation (used), Year of construction: 2009, Functionality: fully functional, TECHNICAL DETAILS Travel X / Y / Z: 1930 / 400 / 570 mm B-axis: ± 95° Spindle speed: 16,000 rpm Control: Siemens 840 D Positioner A/C axis: 360° Continuous positioner: 180 rpm Workpiece dimensions: max. 1,750 x 360 mm Table load: 200 kg Tool magazine: 24 positions (chain magazine) Spindle power: 54 kW Spindle torque: 136 Nm Spindle holder: HSK 63 Feed X / Y / Z: 40 m/min MACHINE DETAILS Weight: 25 t Dimensions: 6.4 x 2.8 x 3.0 m D7U0U2K EQUIPMENT - Chip conveyor - Paper filter - USB connection - Renishaw button

Condition: used, Year of construction: 2013, General SKU: 200W006 Location: Barneveld Make: HPV Type: RVBaseSO No.: 2002-M-1 Year of construction: 2013 Main Features Material: Stainlesssteel Motor: 7.5KW Specified Features - Inline mixer Material: Stainlesssteel1.4404(316L) Continuous reactor: ✔ Rotor sizes: Dia.75x15mm Inlet: dia.40mm Outlet: Dia.30mm Number of stages:: 2 Capacity: 2500l/h Max. temperature: 160°C With mechanical seal: ✔ Motor: 7,5kw,400V,(EX) With frequency controller: ✔ Rotor speed: 6000rpm With vessel: ✔ Drbfcb Capacity: 2x600l Vessel sizes: DIa.790x1400mm Inline high shear mixers Capacity: 0,6m³/h With motor: 1,5kW,400V,720rpm(EX)2x With frequency inverter: ✔ Information With switchgear: ✔(asis) Floorspace: 4,0x3,0m Total height: 2.5 Extra Specifications: SkidmountedstainlesssteelRVbaseSO. with:IKA,typeDispax-reactorDR2000/5-ATEX,year2013,motor7,5kw,400 V,EX. Nirostaverticalnonionictank,volume600ltr,worktemp60ºC.NirostaRVb aseMtank,volume600ltr.2xcentrifugalpumps,1,5kW,(Ex).BSSpressureta nk,lowheatexhanger,typeCFOPP718A5-1,480volt,6000watt,AllenBRadley touchscreencontrol,typePanelViewplus1500. What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Please visit our Foeth website for more information about this machine.

Condition: new, overall weight: 58,000 kg, maximum load weight: 48,500 kg, axe configuration: 3 axles, loading space volume: 42 m³, total width: 2,550 mm, total height: 3,600 mm, Equipment: ABS, HARDOX steel rear tipping trough approx. 42 cbm, loading pressure gauge, support winch(s), ABS, EBS, "KOC OSMAN" axle(s), leaf springs, drum brake system, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment conditions apply. We would be happy to make you a financing or leasing offer for this object. Please contact us! Dqxd9B

Condition: new, Säge-Fräse-Abricht-Dickte-Langloch Technische Daten: Abichthobel: - Arbeitsbreite max. 320 mm - Gesamttischlänge 1500 mm - max. Spanabnahme 5 mm - Abmessung Abrichtanschlag 1100 x 155 mm - Abrichtanschlag 90C-45C schwenkbar - Sicherheitsmesserwelle mit Wendehobelmesser FI 100 mm, Z 3 - Drehzahl 4600 U/min. Ciq9Airsme - Motor Abrichte und Dickte 3,0 kW / 400 V Dickenhobel: - Arbeitsbreite max. 316 mm - Länge des Dickentisch 600 mm - max. Spanabnahme 4 mm - min. / max. Durchlasshöhe 4 / 230 mm - Vorschubgeschwindigkeit 7 m/min. - Absaugstutzen FI 120 mm Kreissäge: - max. Schnittlänge 2000 mm - max. Schnittbreite 630 mm - max. Schnitthöhe 90C 102 mm - max. Schnitthöhe 45C 72 mm - min. / max. Sägeblattdurchmesser FI 250 / FI 315 mm - Drehzahl 4000 U/min. - Länge Parallelanschlag 1100 mm mit Feineinstellung - Sägeblatt schwenkbar 90C - 45C - Motor 3,0 kW / 400 V - Absaugstutzen FI 120 mm - Vorritzaggregat 0,75 kW, Drehzahl 8000 U/min. (OPTION) - Gehungsanschlag 900 mm mit Exzenterspanner Fräse: - Spindeldurchmesser FI 30 mm - Frässpindelverstellung 160 mm - Aufspannhöhe Fräsdorn 125 mm - max. Werkzeugdurchmesser FI 250 mm - Tischöffnung FI 190, 160, 105, 65 mm - max. Werkzeug FI unter Tisch 180 mm - Motor 3,0 kW / 400 V - Drehzahlen 1400/3500/6000/8000 U/min. - Fräsanschlag mit Integral Anschlaglineal 500 mm - Absaugstutzen 2 x 120 mm Abmessungen: - Maschine L=2200, B=1800, H=1200 mm - Gewicht 650 kg

Condition: new, power: 375 kW (509.86 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axe configuration: 3 axles, gearing type: automatic, emission class: euro6, Year of construction: 2022, total width: 2,550 mm, total height: 3,700 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ BUY ++ Mercedes-Benz Arocs 2651 L 6x4 Wiedemann Super 2000 superstructure * Wiedemann enviro tec * Super 2000 8.0/5.0/1.0 Water recycling * 14,000 liter tank size * 1,000 liters of fresh water * 5,000 liters of rinsing water * 8,000 liters sludge volume * Emptying by tilting the tank 45° Dqssan Vacuum system * Wiedemann & Reichhardt KW 4000 * 4,000cbm/h 106kW * Galvanized piping in DN 150 * approx. 20m suction hose DN 150 High pressure system * Uraca P3-45 65 413 liters/ at 175 bar * approx. 180m high-pressure hose DN 32 * Hydraulic flushing hose reel with approx. 80m DN 13 Additional fresh water system * Speck NP 25/50-150 with 50 l/min at 150 bar * Spring-loaded reel with 15m DN 10 pressure hose Special features * Sludge tank made of material 1.4301 * Suction and HP boom * 5 liter hand washing device warm * Stainless steel tool box * Control cabinet with display * Motor - start switchable from control cabinet * NMV - start switchable from control cabinet * Radio remote control with display * Device cabinet with two flaps - on both sides * Hose storage * Sound insulation of the pump compartment raised * LED work lights * Central lubrication system Technical data * Unladen weight 19,260 KG * GGW 26,000 KG * Length 10,200 mm * Height 3,700 mm * Width 2,550 mm Chassis: Special equipment: ABS can be switched off, Axle load - measuring device, Axle load front axle 9.0 t, Audio system: Digital radio DAB / DAB+, Exterior mirror right with maneuvering position, Battery 220 Ah, Cockpit multimedia interactive, Electrical pre-installation in cab 24V / 100 A, Driver assistance system: High beam assistant and cornering light, Driver assistance system: Traffic sign recognition, Cab: Cab access movable, Suspension: Front springs 9.0 t, 4 leaf, Remote online function, Fzg. without trailer brake, vehicle without trailer coupling, speed limiter system, transmission lock independent of transmission, rear axle disk wheel 300, 3-piece mudguards, 3-piece mudguards with splash guard, fuel tank: 290 ltr. Aluminium, left, cool box / refrigerator, cooling capacity for hot climate zones, air intake from front, reinforced engine brake, navigation system, smooth power take-off flange, transmission-independent and clutch-dependent MB 1.2 power take-off, MB 131-2c power take-off, configurable special module, 3900 mm wheelbase variant, 1650 mm frame overhang, rain sensor, acoustic reversing alarm and hazard warning lights (external warning signal), key with remote control (2), protective plate under front bumper, automatic fuse, Further equipment: EURO 6 emissions standard, Axle configuration: 6x4, Heated approach/front mirror, Trailer socket 24V / 15-pin, Arocs 5, Exhaust to right outside, Batteries arranged side by side, Compressed air connection in cab, Compressed air tank steel, Compressed air unit with condensation water monitoring, Compressed air unit medium, Automatic switch-on for driving lights (light sensor), Driver assistance system: Attention-Assist (drowsiness detection sensor), Driving assistance system: autonomous emergency brake assist (Active Brake-Assist 5), Driving assistance system: lane departure warning system, Cab: hydraulic tipping device, Cab: M ClassicSpace, 2.30 m, tunnel 170 mm, Cab: steel-sprung, standard, Suspension: leaf / air, Electric windows, Tinted windshield, Fzg. without rear

Condition: used, Year of construction: 2017, operating hours: 4,505 h, load capacity: 2,000 kg, lifting height: 4,500,000 mm, construction height: 2,170,000 mm, power: 33 kW (44.87 HP), gearing type: automatic, overall weight: 5,170 kg, empty load weight: 3,170 kg, total height: 22,500 mm, color: orange, first registration: 07/2017, maximum load weight: 2,000 kg, number of seats: 1, driver cabin: other, wheelbase: 1,400 mm, Equipment: cabin, front guard, head guard, sideshift, * German vehicle * Condition see photos * Completely new tires * only 4505 operating hours * TYPE: G20SC-5 LP * 1.565 kg lifting capacity at 500 mm heavy load distance * 905 kg lifting capacity at 1,700 mm heavy load distance * Lifting height: 4,500 mm * Load capacity: 2,000 kg * Mast type Doosan FFT with load protection grid Dqsewz * Fork length: 1,700 mm * Fork width: 80 mm * Integrated sideshift with hydraulic fork adjustment * Adjustment range up to 850 mm * 2.4 L LPG engine (HMC) * Automatic powershift transmission * Oil-cooled multi-disc brake * Full cab with protective roof * Driver's seat with restraint system * Windshield wiper * Towing device * Clear instruments * Ergonomic driver's seat * Turning radius: 2,050 mm * OSS (safety shutdown system) * Maximum speed 18 Km/h * Unladen weight: 3,170 kg * Tare weight: 5,170 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: like new (used), Year of construction: 2023, Functionality: fully functional, measuring range X-axis: 1,600 mm, measuring range Y-axis: 3,000 mm, measuring range Z-axis: 1,000 mm, warranty duration: 12 months, total height: 4,000 mm, type of input current: three-phase, We are selling our test and demonstration machine from our solution center. Other machines are available. Please feel free to contact us. Zeiss | PRISMO 10 with REVO 5-axis measuring system Converted coordinate measuring machine with the latest Renishaw 5-axis technology Modernized 2023 Measuring range XYZ 1600 x 3000 x 1000 mm Measurement uncertainty MPE (E0) 3.2 + L/300 in µm Equipment -Renishaw UCC S5 control, SPA3 servo amplifier, MCU5-2 joystick -Active temperature compensation with workpiece sensor Dq883X -Renishaw REVO 5-axis measuring system for single points and scanning incl. RSP2, 1x RSH175, 2 x RSH250 and RSP3-3 kit (3xSH) incl. -all probe changers -Mode measuring software current version with CAD import STEP incl. 1 year software maintenance -PC system Windows 10 with 2 x 27 TFT monitors NEW incl. Height-adjustable desk -Control cabinet with the latest safety technology We are happy to adapt the equipment to your requirements. Offer does not include a turntable! Optional service package of your choice: Transport free to the loading edge | Commissioning | Testing | Accuracy inspection according to DIN ISO 10360 | Software training in Pliezhausen or Eitorf | Further options and equipment are available on request

Condition: used, Year of construction: 2007, General SKU: 430T1359 Location: Barneveld Make: IKAwerkeGmbH Type: MHD2000/5-ATEX No.: 07-6301 Year of construction: 2007 Main Features Material: Stainlesssteel Motor: 5.5KW Rotor: 60mm Specified Features - Inline mixer Continuous reactor: ✔ Rotor sizes: Dia:60x15mm Inlet: DN50 Outlet: DN32 Number of stages:: 1 Capacity: 700l/h Befywu8Ythp With jacket: ✔ With mechanical seal: ✔ Motor: 5,5kW,400/690Volt,2880rpm(EX) Rotor speed: 6000rpm With vessel: ✔ Capacity: 100ltr Vessel sizes: Dia:500x450mm Material: Stainlesssteel1.4404(316L) Information Mounted on frame: ✔ Total height: 2,5m Weight: 550kg CE: ✔ Floorspace: 1,65x1,1m ATEX compatible: ✔ Extra Specifications: ThisIKAWerkeisequippedwithadditionalitems. e:V150Serialnumber:15565-01-2007Workingpressure-1-3.5barTestpres sure:5barOperatingtemperature:50°CCapacity:100litersMaterial:1.43 06(304L)CEcertified Liquidpump,equippedwithmotor:2.5kW,230/400Volt,2870rpm(ex) Barrel2,Brand:E.C.SvanVughtBVType:V-350Serialnumber:G02-09-8606Y earofconstruction:05-2003Workingpressure:3.5barTestpressure:5barO peratingtemperature:20°CCapacity:79.5litersMaterial:1.4432(316L)C Ecertified Heatexchanger:Brand:SulzerChemtech/ZürcherAGType:Heatexchanger1m ²Serialnumber:2277Workingpressure:-1/8bar,-1/15bar,-1/8barTestpre ssure:15.5bar,29.2bar,14barVolume:6liters,8liters,2litersTemperat ure:-30/300°CMaterial:1.4571,1.4404 OntopoftheMHD2000/5,ordata:0.37kW,230/400Volt,1380/29rpm(ex) What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Please visit our Foeth website for more information about this machine.

Condition: new, Year of construction: 2025, Functionality: fully functional, Mechanical asymmetrical three-roller bending machine with pre-bending Make FACCIN, model ASI 2015 Guaranteed services: Sheet thickness rolls at 750 mm diameter 5 mm Cxmzdqn Sheet thickness bending at 750 mm diameter 4 mm Sheet thickness rollers with 195 mm diameter 4 mm Sheet thickness bending at 195 mm diameter 3 mm Performance data refer to steel with a yield point of 240 N/mm² and a strength of 370 N/mm² Technical specifications: Working length 2,000 mm Top roller diameter 150 mm Bottom roller diameter 150 mm Side roller diameter 150 mm Installed power 4.3 kW rolling speed 4 m/min Length 3,300 mm Width 750mm Height 1,200 mm Weight 2,136 kg Standard equipment: All rolls forged and inductively hardened Both central rollers driven Safety control with immediate stop of all machine movements Machine stand stands on frame carrier made of welded construction. This ensures optimum stability and reliability of the machine. Optimum power transmission in the machine stand through long guides with straight-line positioning movement of the bending rollers. (No curved adjustment movement and therefore no torsional forces in the machine stand) Digital display for the position display of the side roll motorized adjustment of the side roll brake motor for rotation and side roll movement Cone bending device with hardened stop block Emergency stop trip wire around the machine Machine with CE certification and documentation

Condition: ready for operation (used), Year of construction: 2017, Functionality: fully functional, EMCO MMV 2000 / built in 2017 Ocy3Zks3G The spindle (18,000 rpm, HSK 63) was changed last spring. Travel 2,000 mm x 800 mm x 800 mm (XYZ). Heidenhain TNC 640 control including tool holder, hydraulic clamping vices and presetting device. The machine has 5 axes and is designed for 5-axis simultaneous machining. The rotary table (D 800 mm) is integrated in the table. The machine is used occasionally, work only 1 - 2 days per week. The machine is equipped with hydraulic clamping for the vices. 6 Hilma double clamps, each with a complete set of jaws, are included.

Condition: used, Year of construction: 1988, Technical details: plate width: 2050 mm plate thickness: 2 mm distance between columns: 2400 mm knife length: 2050 mm stroke adjustment: oben 250 mm adjustment of stroke: unten 100 mm bending angle max.: 180 ° Bsdq0Ae80Xe back gauge - adjustable: mit Aufnahmeschienen mm working pressure: 5,0 MPa total power requirement: 2,2 kVA weight of the machine ca.: 2,3 t dimension machine xH: 3,5 x 1,0 x 2,2 m dimensions of hydaulic: 0,75 x 0,55 x 0,80 mm HYDRAULIC FOLDING MACHINE operation via control panel with boom as well as via foot switch bending angle: sharp bending = up to 135° with 2mm sheet metal stroke of the upper beam = 250mm stroke of the lower beam = 100mm bending jaw stroke = 100mm bending gap = 7mm with scale display *

Condition: used, Year of construction: 2000, Offset 5 color with perfecting Heidelberg SM52-5-P3 Year: 2000 Number of impressions (mio): 153 Gkppp0Oo Plus Version Machine control - CP-Tronic - CPC 1-04 Printing units - Number of printing unit(s): 5 - Machine with perfecting: 2/3 - AutoPlate - Alcolor dampening - Automatic blanket washing device - Cooling system: Technotrans Delivery - Powder spray

Condition: like new (used), Year of construction: 2023, Functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 700 mm, workpiece weight (max.): 1,300 kg, warranty duration: 12 months, total height: 3,000 mm, type of input current: three-phase, total width: 1,845 mm, total length: 3,225 mm, overall weight: 4,200 kg, We are selling our test and demonstration machine from our solution center. Other machines are available. Please feel free to contact us. NIKON | LK with REVO 5-axis measuring system Converted coordinate measuring machine with the latest Renishaw 5-axis technology Year of manufacture end of 2014 / Modernized 2023 Measuring range XYZ 1000 x 2000 x 700 mm Measurement uncertainty MPE (E0) 2.2 + 3.0 x L/1000 in µm Equipment -Renishaw UCC S5 control, SPA3 servo amplifier, MCU5-2 joystick -Active temperature compensation with workpiece sensor -Renishaw REVO 5-axis measuring system for single points and scanning incl. RSP2, 1x RSH175, 2 x RSH250 and RSP3-3 kit (3xSH) incl. -all probe changers -Mode measuring software current version with CAD import STEP incl. 1 year software maintenance -PC system Windows 10 with 2 x 27 TFT monitors NEW including height-adjustable desk -Control cabinet with the latest safety technology We are happy to adapt the equipment to your requirements. Bjkp28Xxmg Current new price plus VAT: €232,000.00 Optional service package of your choice: Transport free loading edge | Commissioning | Testing | Accuracy acceptance according to DIN ISO 10360 | Software training in Pliezhausen or Eitorf | further options and equipment are available on request

Condition: new, x-travel: 3000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! advantages No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum Gyhhb8 stole Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤ 1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour.

Condition: new, Load Weight Shelf 30000 kg Loading weight per level 3000 kg Bh0M7Jir0B Number of load levels 2 x 5 Stk. Recommended material length 6000 mm Column width 3000 mm Shelf height 2440 mm dimensions m

Year of construction: 2007, Condition: used, Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers -Manufacturer: KTS, heavy-duty transport vehicle industrial trailer type DSL with 1-axle turntable steering Type: DSL -Platform: 2000/1115/H610 mm, dimensions see photo technical drawing -Range height: 1400 mm (welded) -Load capacity: max. 5000 kg 7Vifg0Onbs -Tires: solid rubber -Transport dimensions: 3620/1115/H1540 mm -Own weight: 440 kg

Condition: new, Säge-Fräse-Abricht-Dickte-Langloch Technische Daten: Abichthobel: -Arbeitsbreite max. 320 mm -Gesamttischlänge 1500 mm -max. Spanabnahme 5 mm -Abmessung Abrichtanschlag 1100 x 155 mm -Abrichtanschlag 90C-45C schwenkbar -Sicherheitsmesserwelle mit Wendehobelmesser FI 100 mm, Z 3 -Drehzahl 4600 U/min. -Motor Abrichte und Dickte 2,2 kW / 230 V Dickenhobel: -Arbeitsbreite max. 316 mm -Länge des Dickentisch 600 mm -max. Spanabnahme 4 mm -min. / max. Durchlasshöhe 4 / 230 mm -Vorschubgeschwindigkeit 7 m/min. -Absaugstutzen FI 120 mm Kreissäge: -max. Schnittlänge 2000 mm -max. Schnittbreite 630 mm -max. Schnitthöhe 90C 102 mm -max. Schnitthöhe 45C 72 mm -min. / max. Sägeblattdurchmesser FI 250 / FI 315 mm 3Rcqdtum -Drehzahl 4000 U/min. -Länge Parallelanschlag 1100 mm mit Feineinstellung -Sägeblatt schwenkbar 90C - 45C -Motor 2,2 kW / 230 V -Absaugstutzen FI 120 mm -Vorritzaggregat 0,75 kW, Drehzahl 8000 U/min. (OPTION) -Gehungsanschlag 900 mm mit Exzenterspanner Fräse: -Spindeldurchmesser FI 30 mm -Frässpindelverstellung 160 mm -Aufspannhöhe Fräsdorn 125 mm -max. Werkzeugdurchmesser FI 250 mm -Tischöffnung FI 190, 160, 105, 65 mm -max. Werkzeug FI unter Tisch 180 mm -Motor polumschaltbar 2,2 kW / 230 V -Drehzahlen 1400/3500/6000/8000 U/min. -Fräsanschlag mit Integral Anschlaglineal 500 mm -Absaugstutzen 2 x 120 mm Abmessungen: -Maschine L=2200, B=1800, H=1200 mm -Gewicht 650 kg    

Condition: excellent (used), Year of construction: 2009, Very well maintained machine with few working hours, Contact possible also via WatsApp, We speak English German and ex YU languages. The machine is located in Germany. All machine specification is in pdf attachment Bme7300Hxys

Condition: used, Year of construction: 2009, x-travel: 4000y-travel: 2000z-travel: 600messurements (LxWxH): 6.400 x 3.200 x 3.100weight approx.: 10.500 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble Bljx7Xzjj2K tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour. Extras: Including extra spare parts worth approx. 25.000¤ (see pictures)

Condition: new, Load Weight Shelf 15000 kg Loading weight per level 3000 kg Number of load levels 5 Stk. Recommended material length 6000 mm Column width 2 x 2000 mm Shelf height 2440 mm Bh0M0Tn9Fy dimensions m

Year of construction: 2009, Condition: used, Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers -Manufacturer: KTS, heavy-duty transport vehicle industrial trailer type DSL with 1-axle turntable steering Nkpp3Ix -Type: DSL -Platform: 2000/1000/H610 mm -Load capacity: max. 5000 kg -Tires: solid rubber -Total dimensions: 3560/1000/H610 mm -Own weight: 300 kg

Condition: new, x-travel: 4000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass H3Z9Y2P9Q Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour.

Condition: new, Year of construction: 2025, Functionality: fully functional, machine/vehicle number: CW2000 4/1 2025/1, laser power: 2,000 W, laser wavelength: 1,064 nm, type of input current: AC, 5 in 1 laser device with an output of 1500 to 3000w - Cleaning rust, oil, dirt, paint removal from metal surfaces, machines - Cutting metals - Cleaning weld seams - Welding of ALU / stainless steel / FE etc. with wire feed - Burning - Soldering of ALU / stainless steel / FE etc. without wire The device is NEW and is configured and adjusted according to customer requirements! - Air freight approx. €1345 / 2 weeks The configuration and price depend on the customer's requirements and area of application. We offer professional training in the use of the devices in accordance with the UAVA / UVV in Austria and Germany. Ctdndmvo2G Since we are service providers and work with the devices, we can also guarantee that they work. We offer extensive instruction on site or at our workshops or customer-oriented demonstrations in Germany & Austria

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: R14102942 / E14130753 (Steuerung), overall weight: 1,270 kg, load capacity: 250 kg, arm reach: 2,655 mm, controller manufacturer: FANUC, controller model: R-30iB, input voltage: 400 V, FANUC industrial robot Robot R-2000iB 250F, Year of construction 01.2014 (control cabinet 12.2013). Axes: 6, reach: 2,655 mm, Load capacity: 250 kg. Dimensions: Length 200 cm, width 110 cm, height 185 cm. Ezjygvtrd Control cabinet: FANUC R-30iB. Complete with robot manipulator, connection cable, teach panel, control unit. (See type plates for further details). IPendant A05B-2255-C101#EGN We also offer accessories such as bases, spot-welding guns, rotary tables and much more. We are also happy to demonstrate the robot. Packaging and loading included.