Conveyor screw with geared motor drive
Rossi Motoriduttori
MR V 535 UO4E
Conveyor screw with geared motor drive
Rossi Motoriduttori
MR V 535 UO4E
Fixed price plus VAT
650 €
Type of offer
Ex-display machine
Location
Planina pri Cerknem 044, 5282 Cerkno, SI
Conveyor screw with geared motor drive
Rossi Motoriduttori MR V 535 UO4E
MACHINE DATA
- Machine type:
- Conveyor screw with geared motor drive
- Manufacturer:
- Rossi Motoriduttori
- Model:
- MR V 535 UO4E
- Condition:
- as good as new (ex-display)
PRICE AND LOCATION
LISTING DETAILS
- Listing ID:
- A5470164
- Update:
- 10.01.2022
DESCRIPTION
New screw conveyor screw with geared motor drive for intermittent operation. Usable for transport of bulk materials.
Screw Diameter: 125 mm, Length: 2650 mm
Brbhyou
Geared motor info - see label picture.
Screw Diameter: 125 mm, Length: 2650 mm
Brbhyou
Geared motor info - see label picture.
SELLER
EMOK d.o.o.
Contact person: Herr Milan Eržen
Planina pri Cerknem 044
5282 Cerkno, Slovenien
Registered since: 2015
Send inquiry
TELEPHONE & FAX
Telephone:
+38653800053
Fax: +38653800052
These listings may also fit your interest.
5
Wiefelstede, Germany
(dealership location)
used
Gear motor, electric motor
-Speed: 22.2 rpm
-Drive: ABB motors type M2VA63A-4
-Power: 0.12 kW
-Hollow shaft: Ø 24 x 90 mm
-Protection class: IP 55
-Dimensions: 320/140/H180 mm
Bftd8a9c3l
-Weight: 10 kg
5
Wiefelstede, Germany
(dealership location)
used
Forklift battery charger, industrial charger, forklift battery charger, industrial charger
-Voltage: 24 volts
-Power: 10 A
-Connection: 210/265 volts
-Dimensions: 270/160/H120 mm
-Weight: 8.3 kg
Nmq0l
9
Schwäbisch Gmünd, Germany
(dealership location)
2009
used
grinding length 1100 mm
grinding width 600 mm
table load 800 kg
Control SIEMENS 840 D
internal grinding diameter 600x600 mm
grinding height 800 mm
spindle drive 22 kW
grinding wheel diameter 180-250 mm
grinding wheel turining speeds 2.000-10.000 U/min
table diameter 1000 mm
table speeds 5-150 m/min
rapid traverse 15 m/min
grinding diameter 1000 mm
table diameter 800 mm
cross travel 900 mm
vertical movement 900 mm
total power requirement 55 kW
weight of the machine ca. 14 t
dimensions of the mac...
5
Wiefelstede, Germany
(dealership location)
used
Forklift battery charger, industrial charger, forklift battery charger, industrial charger
Bhxoba7mlv
-Voltage: 24 volts
-Power: 40 A
-Connection: 220 volts
-Dimensions: 250/200/H400 mm
-Weight: 21 kg
4
Wiefelstede, Germany
(dealership location)
2000
used
Gear motor, electric motor
-Motor comes from a Gansow scrubber-dryer
-Connection: 24 volts
Ksa2vadh
-Speed: 180 rpm
-Power: 0.4 kW
-Protection class: IP 20
-Number: 2x available
-Price: per piece
-Dimensions: 310/132/H190 mm
-Weight: 10 kg
6
Voltage: 24 V DC
Fgvktxeh
Guarantee in months: 12
Product condition: very good, unused
Manufacturer: Rexroth
Item No.: 00953568
1
Wiener Neudorf, Austria
(dealership location)
new
neu
ca. 6 Monate ab Auftragse
Taiwan
55500
1015.65
2540 mm
3.5 mm
2.5 mm
135 °
3,7 kW
3850 mm
1700 mm
1860 mm
3700 kg
NC control for bending angle
manual back gauge 600 mm
Bwe3lssg
hydraulic driven
vertical movement of upper beam
segmented blade
segmented goose neck rail 30°, 110 mm with quick tool change system
one piece flat bottom bar 30 mm
according to CE rules
(sample photo showing model V-AMH 2535 2 axes NC control Schneider)
OPTION:
2 axes NC control Schneider tou...
4
Wiefelstede, Germany
(dealership location)
used
Gear motor, electric motor
-Motor comes from a Gansow scrubber-dryer
-Connection: 24 volts
-Speed: 120 rpm
-Power: 0.2 kW
-Protection class: IP 44
-Number: 4x available
-Price: per piece
Fzy8vkp
-Dimensions: 310/90/H180 mm
-Weight: 7.6 kg
4
Wiefelstede, Germany
(dealership location)
used
Gear motor, electric motor
-Motor comes from a Gansow scrubber-dryer
-Connection: 24 volts
-Speed: 180 rpm
-Power: 0.25 KW
-Protection class: IP 20
Bcag3zgioi
-Number: 5x available
-Price: per piece
-Dimensions: 270/130/H190 mm
-Weight: 7.1 kg
4
Wiefelstede, Germany
(dealership location)
1997
used
Electric motor
Lghsmqpb
-Motor comes from a Gansow scrubber-dryer
-including holder for: brush
-Connection: 24 volts
-Speed: 200 rpm
-Power: 0.65 kW
-Dimensions: 176/176/H315 mm
-Weight: 16 kg
5
Wiefelstede, Germany
(dealership location)
2002
used
Gear motor, electric motor
-Motor comes from a Gansow scrubber-dryer
-Connection: 24 volts
-Speed: 200 rpm
-Power: 0.65 kW
-Shaft: Ø 25 x 60 mm
-Flange diameter: 80 mm
-Number: 13x available
-Price: per piece
-Dimensions: 176/176/H315 mm
Cxn0q2f
-Weight: 14 kg
4
Wiefelstede, Germany
(dealership location)
used
Gear motor, electric motor
-Motor comes from a Gansow scrubber-dryer
-Connection: 24 volts
-Speed: 215 rpm
-Power: 0.3 kW
-Protection class: IP 20
-Number: 6x available
-Price: per piece
-Weight: 6.5 kg
Bcavhoh00l
4
Wiefelstede, Germany
(dealership location)
used
Electric motor, three-phase motor
-Power: 4.5 kW
-Speed: 920 rpm
-Shaft: Ø 30 mm
-Construction: B5
Nhpnb
-Protection class: IP 44
-Price: per piece
-Number: 1x available
-Dimensions: 475/340/H345 mm
-Weight: 65 kg
6
Your contact persons in our company:
Mr.: Andre Evering
Mr.: Mario Klöver
Mr.: Falk Deutsch
Mr.: Simon Blank
Included in delivery
01x post protector, used
Material color: yellow
Finish: V
total height: approx. 750 mm
total width: approx. 100 mm
inner width: approx. 93 mm
Qjntd
total depth: approx. 60 mm
material thickness: approx. 3,50 mm
Grid/ hole spacing: approx. 300 mm
number/ holes: 06 pcs. (03 pcs./side)
Hole Ø: approx. 11 mm
06x hexagon head screw: M8 x 35 mm
06x Toothed nut: M8
06x washe...
7
Gussago, Italy
(dealership location)
2007
used
Wheel width: 250
Wheel diameter: 510
CNC: Fanuc 160i T
CNC centerless grinding machine Monzesi mod Monza 510 CNC 6 axes complete with piece loading and unloading system CNC Fanuc 160i-T Under power in our warehouse in Gussago BS.
machine tools Italy
Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers
cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc.
During centerless plunge grinding, the wor...
5
Bj 2007 With touch display
Immediately available and ready for use
Modular labeling machine, designed for applying labels to the top and bottom of products and goods in different shapes and materials in a continuous flow.
Cabjqcovrs
1
Rossi/Monza 400 Centerless Grinding Machine - Grinding Wheel dimension: 406mm x 200mm - three versions: CONVENTIONAL - SINGLE-AXIS PLC SIEMENS - CNC FANUC - The machine is completely restored to new with original parts, is CE marked (manufacturer's authorization) and delivered with 12 months warranty. - Possibility of integrating loading/unloading automation - Machine delivery: 2/3 months from order (FANUC version 6/7months)
Qhuxn
3
Birkerød
2001
good (used)
MR Labelling technique with PCE camera system.
He3efgj9
5
Wiefelstede, Germany
(dealership location)
used
Gear motor, electric motor, electric gear motor
-Engine manufacturer: ASEA type MBT132S
-Gearbox manufacturer: Rossi, type RV125U02B
-Speed: 99 rpm
-Power: 5.5 kW
-Construction: B3
-Hollow shaft: Ø 60 x 210 mm
-Protection class: IP54
-Dimensions: 470/320/H775 mm
-Weight: 149 kg
F3ivyo8x
5
Åkervägen 18, 696 32 Askersund, Sweden
good condition (used)
V-nailer
Brand: Cassese
Model: CS 830
Cj3xfteo
Techn info:
Max air pressure: 7 bar
Stock no: 2000937
Price: 5000 SEK
1
Bad Zwischenahn
2016
reconditioned (used)
Stationary charger 24 V 50 A
used
with regulated characteristic
Scp7od0d
charging voltage 28,8 V
trickle charge 26,76 V variable adjustable
via electronics
Suitable for charging gel or AGM batteries
4
Mont-de-l'Enclus
1997
good (used)
PANEL LENGTH 280/3000
Fw3uqdv
PANEL WIDTH 110/800
PANEL THICKNESS 15/35
ROTATION SPEED 2800 RPM
SEE ATTACHED SHEET
1
Rossi/Monza 410 Centerless Grinding Machine - Grinding Wheel dimension: 406mm x 200mm - three versions: CONVENTIONAL - SINGLE-AXIS PLC SIEMENS - CNC FANUC - The machine is completely restored to new with original parts, is CE marked (manufacturer's authorization) and delivered with 12 months warranty. - Possibility of integrating loading/unloading automation - Machine delivery: 2/3 months from order (FANUC version 6/7months)
B97lvf9dlk
5
Well-functioning labeling machine with conveyor belt. Speed adjustable.
Hatxs7r
5
Berlin, Germany
(dealership location)
ready for operation (used)
Without accessories and documentation.
Jcgc9yr08
4
- Grinding wheel width: 100 mm
- Working wheel diameter: 300 mm
Equipped with :
Voia33yv
- 2 hydraulic diamond cutters
- 1 Ruler holder for working in a row
- 1 Manual dive
1
Bad Zwischenahn
2020
reconditioned (used)
You are looking for a used forklift battery ?
24, 48 or 80 V ?
Then you are at the right place.
Simply make an inquiry and you will immediately receive a
offer.
For the offer processing we need the following data.
Iuk9bpn3c
Battery type: e.g. 80 V 4 PzS 620
Battery trough outer dimensions : L x W x H
Forklift manufacturer and type.
A photo may also be very helpful.
All used batteries will be checked in our workshop with a
capacity test over 5 hours.
If you tell us your condition of use, we can o...
6
Neukamperfehn
as good as new (ex-display)
Your contact persons in our company:
Mr.: Andre Evering
Hufgtv7uy
Mr.: Mario Klöver
Mr.: Falk Deutsch
Mr.: Simon Blank
Included in delivery are:
01x insert box, II choice
Manufacturer: SSI Schäfer
Type: 14-2 v
Material color: hot-dip galvanized
Material: steel, galvanized
Outer dimensions: approx. 148x95x70 mm(LxWxH)
own weight: approx. 0,200 kg
two recessed handles
stackable
suitable for open fronted storage bins:
- 14/7-3 Z
- 14/7-3
- 14/7-2
General information about the article:
This item is ...
8
Universal milling machine - V - TRADE 2 VS
General condition - NEW
travel X - axis approx. 860mm
traverse path Y - axis approx. 330mm
travel Z - axis approx. 410mm
Speed range / STUFENLOS approx. 70 - 4200 rpm
Pwasj
tool holder : SK 40
rapid traverse / feeds in 2 - axes
ACCESSORIES:
3 - axes digital display
Milling spindle protection
EMERGENCY - OFF
CE - identification
Vertical milling head rotatable over column
Vertical milling head movable forward/backward
additionally swivelling right/left an...
5
flowmeter Endress-Hauser Pulsmag V + Variomag
measuring range:0,0420 m3/sec
Power 0 - 20 mA
Temperature max. 80 °C
lining material: HG
Connections DN 150 /PN16
Voltage 220 V
measuring range
Frequency 50 Hz
Bgykok9dpb
Length 220 mm
Width 260 mm
Height 350 mm
Weight 13 kg
4
Staufenberg, Germany
(dealership location)
good (used)
Trough Trowal Vibrator make WALTHER TROWAL Type V 65
Technical data:
Trough size inside 500 x 400 x 350 mm
Trough opening 500 x 220 mm
max. speeds 2700 rpm.
external dimensions approx. 2000 x 1000 x 1230 mm
Weight approx. 1830 kg
Ftksdpmx
with
- Meterable water supply (pump)
- Trough opening tap for withdrawal
used, in good condition
5
- Grinding wheel : 610 x 355 mm
- Regulating wheel : 305 x 355 mm
Equipped with :
- 1 Slide rule holder for in-feed work
- 1 CNC Plunge with automatic correction of size
Bh3hp2mngt
- 1 Diamond grinding wheel with wear compensation of wheel
1
Bad Zwischenahn
2018
good condition (used)
GNB charger HF 48 V 260 A
Charging plug Rema 320 or 160
suitable for wet or gel batteries
from 500 Ah to 930 Ah
with data memory to read out the charging process
tested DGUV 3
Warranty 9 months
We can retrofit the following options
1. electrolyte circulation ( EUW )
2. temperature monitoring during charging
The device is programmed to your battery before delivery.
your battery.
Olghx9bz
Delivery time: Immediately from stock
Delivery: from 26160 Bad Zwischenahn
7
Neukamperfehn
as good as new (ex-display)
Your contact persons in our company:
Mr.: Andre Evering
Mr.: Mario Klöver
Mr.: Falk Deutsch
Mr.: Simon Blank
Included in delivery are:
01x stacking box, II choice
Manufacturer: SSI Schäfer
Type designation: 10/6-b v
Material color: hot-dip galvanized
Material: steel, galvanized
Outside dimensions: approx. 645x330x208 mm (LxWxH)
Inner dimensions: approx. 500x298 mm(LxW)
Useful height in stack: approx. 184 mm
Dead weight: approx. 7,200 kg
B8gem3pnjm
loadable up to 200 kg
two fixed handles availabl...
1
Bad Oeynhausen, Germany
(dealership location)
good (used)
- Mitre cut length (mm): 100
Bvsc7nkl
- Adhesive medium: hot melt adhesive
- Automatic composition: of frame parts
15
Gear motors
Manufacturer Rossi
Year of manufacture 2016
Type: R4EL 042A
Btjr7roejf
Used in the construction of the facade of the test tower Rottweil
7
Kłodawa
1997
repair required (used)
Mortising machines Maka Db-6 v Second hand 1977
Make:
Maka
Model:
Nvchn
Db-6 v
Description:
VERTICAL MORTISER MAKA DB-6 V Year of construction: 1977 Machine condition: very good afer repairs capital Offertype: used machine offer Location: Poland Technical data: AFTER REPARIRS VERY IMPORTENT VERTICAL
Year:
1977
4
Radial drilling machine with cube table
Document see anhängendes technical design
Gvtu08
4
Witten, Germany
(dealership location)
2022
new
x-travel:420 mm
y-travel:220 mm
z-travel:380 mm
horiz. Table:840x390 mm
vert. Table:950x250 mm
Hwhwqbhd3
spindle turning speed range:65-2600 U/min
tool adaptor:DIN 2080 ISO 40
7
Neukamperfehn
good condition (used)
Your contact persons in our company:
Mr.: Andre Evering
Mr.: Mario Klöver
Mr.: Falk Deutsch
Mr.: Simon Blank
Included in delivery are:
01x open fronted storage box, II choice
Manufacturer: SSI Schäfer
Type: 14/7-3-v
Material color: hot-dip galvanized
Material: steel, galvanized
Outside dimensions: approx. 352x220x200 mm(LxWxH)
Zrh8s
Inner dimensions: approx. 300 x 198 mm(LxW)
Useful height in stack: approx. 184 mm
Dead weight: approx. 2,400 kg
Loadable up to 60 kg
Drop handle at the back
stackab...
To the fully automatic Assembly of frame parts.
Svloc8e
Frame dimensions: min. 120 x 120 mm
1050 x 2,500 mm
2 heating Rails
1
roll diameter:525 mm
throat:520 mm
workpiece height:310 mm
table-size:600x500 mm
I38lrde3e
saw band length:3840 mm
