Power generator

SCANIA DS 9 56

Condition: used, Year of construction: 1977, pressure 250 t stroke 40 - 190 mm no. of strokes 40 /min Dcsdovuuaispfx Afnec throat 500 mm passage to the back 1050 mm dayligth 615 mm table surface area 1380 x 880 mm hole in the table 450 mm table height over floor 800 mm ram surface 1200 x 800 mm ram adjustment 125 mm power requirement 22,0 kW Weight 24,0 t dimensions of the machine ca. 2,0 x 2,5 x 3,95 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, manual stroke adjustment, motoric centralized lubrication, bolster plate, two-hand operation

Year of construction: 1972, condition: good (used), Power generator, emergency power generator, generator, power generator, power generator, emergency power generator, power generating unit -Manufacturer: PILLER/MWM -Power: 730 kVA 50 Hz -Engine: MWM type TbRHS 518V16, power 850 hp, speed 1500 rpm Dcjdpsivql Isfx Afnjc -Generator: PILLER NKTB 4-1158 -Note: without controls -Individual components: see photos -Transport dimensions: 6 loading meters -Total weight: 8600 kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, type of input current: AC, Equipment: documentation/manual, TAMGLASS / GLASTON Dodpjxtf Dfofx Afnscc HTF ProE – 2448-ADS-R 2400 x 4800 mm, 3 – 19 mm, Right – Left Glass tempering furnace (for Low-E glass) Year: 2006 Noise reduction cabin included 160 kW compressor for 3 mm glass included In good condition.

Condition: used, Year of construction: 2019, operating hours: 1,360 h, Mini excavator CASE CX26C, Dedpfx Afjurfkconscc * Year of manufacture 2019, * 1360 operating hours, * Heating, * Air conditioning, * Rubber tracks, * Dozer blade, * Quick coupler

Condition: ready for operation (used), Year of construction: 2018, operating hours: 60,000 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, power: 3,028 kW (4,116.93 HP), empty load weight: 10,000 kg, fuel: domestic gas H, control cabinet height: 2,000 mm, control cabinet length: 600 mm, control cabinet width: 800 mm, nominal power: 2,679 kW (3,642.42 HP), rotational speed (min.): 1,500 rpm, type of cooling: water, GE Jenbacher JMS 616 GS-N.L Gas CHP Unit Fuel Type: Natural Gas Electrical Output: 3,065 kW Thermal Output: 2,420 kW Total Efficiency: 85.6% Electrical Efficiency: 42.9% Thermal Efficiency: 42.7% Voltage: 690 V Frequency: 50 Hz RPM: 1,500 Engine Configuration: V16 (60° angle) Bore x Stroke: 190 mm × 220 mm Displacement: 99.8 L Dodpfxewptfre Afnecc Fuel Consumption: Approx. 597 Nm³/h (at LHV 9.5 kWh/Nm³) Noise Level: 101 dB(A) at 1 metre Dry Engine Weight: approx. 10,000 kg Dimensions (L×W×H): 8,300 × 2,200 × 2,800 mm ⚙️ Included Equipment Turbocharged engine with intercooler STAMFORD LVSI 804 W alternator (rated 3,555 kVA) LEANOX control system Electronic ignition system Full lubrication system (pump +filters) Heat exchangers for coolant and oil Control panel with visual interface Pre-heating system Gas train according to DIN-DVGW standards

Condition: like new (used), Year of construction: 2008, Üstünkarli UDKP 160 Dcjdpfsucnudjx Afnsc Cutting height 160 mm Chain bed approx. 420 mm With spikes in the chain bed Including slat bush and spacer rings Main engine 75kW

Condition: used, Year of construction: 2021, operating hours: 6,670 h, machine/vehicle number: 241431, fuel type: diesel, power: 129 kW (175.39 HP), motor manufacturer: Iveco, Field of application: Construction Empty weight: 2.150 kg Generator capacity: 143 kVA Transport dimensions (LxWxH): 2.99x1.1x1.5 Dcodotr Iw Hopfx Afnec Please contact PFEIFER GROUP for more information

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, center mower lifting cylinder -Hydraulic cylinder: stroke 105 mm -Piston rod: Ø 23 mm Djdpegv Dinsfx Afnscc -Recordings: Ø20 x 22 mm -Cylinder: outer Ø 58 mm -Dimensions: 475/70/H75 mm -Weight: 5.7 kg

Condition: used, Year of construction: 2011, Used machine Year of manufacture: 2011 Condition: Machine completely overhauled and serviced Equipment and technical specifications: Infinitely variable feed speed: 10–18 m/min Edge Control 19 control system with 18.5" touchscreen color display Jointing milling unit Edge feeding Cartridge adhesive application station with sensing nozzle and automatic glue height adjustment Dcodpfx Afjwka N Tjnec Pressure unit End trimming unit Multifunctional milling unit Corner copying unit Radius scraper unit Surface scraper Buffing unit Workpiece thickness: 6–60 mm Edge thickness: 0.4–8 mm Minimum workpiece width: 60 mm Shortest workpiece length: 180 mm Dimensions: 5300 x 1500 x 1600 mm Weight: 2,200 kg Location: 65439 Flörsheim Availability: short notice

Condition: used, Year of construction: 2009, functionality: fully functional, Info: 9m Chamber Length x 3m (approx) Dia, Touch Screen Operators Control Panel, Rated Current 1100A, Control Voltage 24v, 230v/50hz, Service Voltage 400v, 2 x Honeywell Digital temp Controllers, Honeywell Digital Pressure Controller, Honeywell Dodpfx Aewintksfnjcc