Crane truck

Scania R 730 LB8x2 V8 FASSI F1650 RA.2.28 XHE- DYNAMIC...

Condition: used, Bandsaw Blade Sharpening Machine Vollmer CAB 42 U - Bandsaws: - Blade width: 60 to 210 mm Gbjdpfsxxn Tasx Afnsh - Blade length: 6000 to 11000 mm - Tooth pitch: 6 to 60 mm - Tooth height: 4 to 25 mm - Rake angle: -5 to +35° - Working speed: 30 and 45 teeth/min - with central height adjustment - Feed from right to left - with clamping device for bandsaw blades

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material Gbsdpfsfg E Hlox Afnjh 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: used, Year of construction: 2008, fully equipped, with cutting extension to 540 mm incl. HM special blade 350 x 3.5 x 40, 108 trapezoidal teeth flat tooth, negative rake for aluminum cuts used, top condition, low hours Manufacturer: Graule Model: ZS 135 Year of manufacture: 2008 Machine no.: 2008/30/23 CE pattern tested Motor 2 kW Brake motor Cutting height approx. 135 mm Gjdeww Nd Tspfx Afnebh Large cutting length extended to approx. 540 mm Blade diameter approx. 350 mm Saw blade bore approx. 30 mm Tiltable right Tiltable left Machine base Roller table right 3000 mm with stop and scale – RLH with handwheel adjustment, pneumatic clamping, and electronic digital display Roller table left 5000 mm, type RO Feed brake Material support made of aluminum Coolant spraying system 2 x pneumatic workpiece clamps right + left Pressure reducing valve Original price approx. €12,750.00 Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee.

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm Gbjdpfxjd Iipme Afnsh dimensions of saw-band 5320 x 34 x 1,1 mm total power requirement 3,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens

Condition: used, mileage: 231,230 km, power: 478 kW (649.90 HP), first registration: 06/2016, fuel type: diesel, tire size: 385/65/22.5, axle configuration: 8x4, wheelbase: 4,700 mm, fuel: diesel, color: green, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, Year of construction: 2016, Equipment: ABS, AdBlue, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, fridge, navigation system, onboard computer, parking heater, power assisted steering, soot filter, trailer coupling, = Additional options and equipment = - Aluminum fuel tank - Differential lock - Air conditioning - Leather interior - Leather upholstery - Air horn - Particulate filter - Beacon light - Reversing camera - Disc brakes - Sleeper cab - Sun visor - Stability control - Auxiliary heater - Immobilizer - Toolbox - Power take-off (PTO) - Central lubrication - Tow hitch = Further information = Technical information Engine displacement: 16,123 cc Transmission Transmission: I-SHIFT, 12-speed automatic Axle configuration Brakes: Disc brakes Front axle 1: Tire size: 385/65/22.5; Max. axle load: 10,000 kg; Steering; Suspension: leaf springs Front axle 2: Tire size: 385/65/22.5; Max. axle load: 10,000 kg; Steering; Suspension: leaf springs Rear axle 1: Tire size: 315/80/22.5; Twin tires; Differential lock; Max. axle load: 13,000 kg; Reduction: hub reduction; Suspension: air suspension Rear axle 2: Tire size: 315/80/22.5; Twin tires; Differential lock; Max. axle load: 13,000 kg; Reduction: hub reduction; Suspension: air suspension Weights Unladen weight: 29,975 kg Payload: 14,025 kg Gross vehicle weight: 44,000 kg Functionality Lifting capacity: 32,000 kg Lifting height: 3,500 cm Crane: PALFINGER PK 165002 G TEC 7 + JIB PJ240 E, mounted behind the cab Interior Upholstery: leather VOLVO FH 650 8X4 WITH PALFINGER PK 165002 G TEC 7 CRANE + JIB PK 240 E DPC-C + WINCH EURO 6 L PACKAGE 650 HP DRIVE 8X4 WHEELBASE 470 CM LEAF/AIR SUSPENSION 10 TONS PER AXLE FH CAB WITH FULL EQUIPMENT AIR CONDITIONING, PARKING HEATER, NAVIGATION, LEATHER REFRIGERATOR, REVERSING CAMERA DYNAMIC STEERING I-SHIFT AUTOMATIC TRANSMISSION VOLVO ENGINE BRAKE FACTORY COMPLETE INNER LINER CHASSIS TRACTOR UNIT, FLASHING LIGHTS, AIR DEFLECTORS TOOLBOXES, TRAILER COUPLING PALFINGER PK 165002 G TEC 7 CRANE + JIB PJ 240 E DPS-C 165 T/M CRANE!!! OIL COOLER FOR CRANE HYDRAULICS 14X HYDRAULIC EXTENSIONS MAX WORKING HEIGHT 35 METERS!! MAX LIFTING CAPACITY 32,000 KG MAX LIFTING CAPACITY AT 31 METERS 1,600 KG CRANE CAN OPERATE 100% IN FRONT OF THE CAB VIA THE 1X FRONT OUTRIGGER TOTAL 5X OUTRIGGERS LARGE HYDRAULIC WINCH WITH ALL HOOKS AND ROLLERS RADIO REMOTE CONTROL NUMEROUS TOOLBOXES Gsdpfxjxp Nbtj Afnjbh LATEST CONTROL ELECTRONICS PALTRONIC 150 SAFETY AND COMFORT FEATURES WITH OVERLOAD PROTECTION STABILITY MONITORING (HPSC) HIGH PERFORMANCE LIFTING SYSTEM (HPLS) ACTIVE VIBRATION DAMPING (AOS) DUAL POWER SYSTEM PLUS (DPS PLUS) WHEN USING THE FLY JIB FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Year of construction: 2009, condition: good (used), Load capacity: 30 t Gedpeqiz N Rofx Afnebh Fine lift Lifting height 9 meters

Condition: excellent (used), mileage: 283,000 km, first registration: 11/2017, fuel type: diesel, axle configuration: 8x2, fuel: diesel, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 7,000 mm, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, crane, cruise control, electric window regulation, navigation system, parking heater, power mirror, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Power brake booster - Low noise - Speed limiter - Refrigerator - Alloy wheels - Air suspension - Air horn - Radio/CD player - Reversing camera - Sun visor - Auxiliary heater - Toolbox - Xenon lighting - Power take-off (PTO) - Central lubrication - Tow hitch Gbsdpjutlpnofx Afneh = Further Information = Axle configuration Front axle 1: alloy wheels; steered Front axle 2: alloy wheels; steered Rear axle 1: alloy wheels; suspension: air suspension Rear axle 2: alloy wheels; lift axle; steered; suspension: air suspension Weights Curb weight: 25,300 kg Payload: 6,700 kg Gross vehicle weight: 32,000 kg Functionality Crane: FASSI F 820RA.2.28 XHE-Dynamic, year of manufacture 2017, mounted behind the cab Superstructure brand: FASSI F 820RA.2.28 XHE-Dynamic CE marking: yes Condition Technical condition: very good Visual condition: very good Financial Information Price: On request

Condition: used, Number of boring spindles 10 St. Working width 230 mm Working height 160 mm Gbsdpew H Iv Tefx Afnjh Feed motor 5,5 kW Feed speed 6-36 m/min.

Condition: used, Year of construction: 2016, machine/vehicle number: 0605-240010, FICEP Flex FRC 1201 coping robot The Ficep FRC 1201 coping machine is part of the latest process in automatic CNC controlled thermal coping process. This modern CNC-controlled coping robot system is suitable for fast thermal cutting and notching of profile types H / U / L / flat and square tubes. The steel profile is positioned in the system at the position to be cut using a pulling gripper measuring carriage via the roller conveyor. A robot arm with the cutting units (oxyfuel or plasma) cuts the profiles at the selected position. The cut or notched finished components either fall into the collecting tray or are pushed out of the system by the measuring arm. Thermal cutting units: This Ficep profile support notching system Flex FRC 1201 is equipped for thermal cutting with oxyfuel and/or plasma. A Hypertherm HYPERFORMANCE PLASMA HPR 260 XD suitable for material thicknesses up to 32 mm is used as the plasma power source. Thicker material thicknesses or phase cuts greater than 32 mm are cut with the oxyfuel cutting unit. Transport system: On the infeed side in front of the Ficep Flex FRC notching system is a chain drag cross conveyor with a length of 11,150 mm. The profiles (components) can be conveyed in both directions. The profiles are then transported into the machine on a stable roller conveyor with a gripper measuring carriage. The system is designed for 12 m long profiles and therefore has 12 m roller conveyors with a roller conveyor width of 1. 300 mm on the infeed side and 12 m on the outfeed side.300 mm. 4 chain tractors with a length of 6,450 mm are available after the notching system to transport the finished components to the outfeed side. Gbedpfjtwm Ubsx Afneh Mitrol CNC control and Pegaso software: The system is controlled by a modern CNC control system from Mitrol. The reliable CNC control is from Ficep's own manufacturer Mitrol with the Pegaso software including remote maintenance option and data transfer interface. Torit DCE filter unit The filter unit for the dirt extraction is from Donaldson Torit DCE Safety: via fence and light barriers Max. profile cross-section: 1,220 mm. Profile cross-section : 1,220 x 600 mm Min. material length : 2,500 mm Working height : 865 mm Weight: 7000 kg Weight of cover firing unit : 1200 kg This modern Ficep Flex FRC 1201 coping robot system is in very good condition.

Condition: good (used), Year of construction: 2002, operating hours: 5,900 h, functionality: fully functional, machine/vehicle number: 74343, working width: 1,350 mm, grinding belt length: 2,620 mm, grinding belt width: 1,370 mm, Wide belt sander Bütfering Optimat SBC 313 Year of manufacture: 2002 Model: Optimat SBC 313/QCE/Classic - with 3 units (see attached photo for description) - sanding from above Working width: 1350 mm Abrasive belt width: 1370 mm Abrasive belt length: 2620 mm Cross belt width: 150 mm Gbjdpoqvl D Hjfx Afnsh Cross belt length: 4700 mm For more detailed information, see the photos