Demountable Industrial Hall

Spantech 800

Condition: used, Year of construction: 2021, saw blade diameter: 800 mm, rotational speed (min.): 1,450 rpm, power: 5.5 kW (7.48 HP), Crosscut saw AS Very good, well-maintained condition Saw blade diameter 800mm. Sturdy tubular steel base frame. Powerful saw motors. Pneumatic material clamps (3 vertical). 2-hand safety operation. Coolant device. Protective hood. Ijdpfxsd Szf No Ab Tstd Optionally with length measuring system or automatic positioning system. Version as automatic saw-drilling machine or automatic saw-punching machine on request.

Condition: used, functionality: fully functional, The Layher AR O-ledger 1.09 m forms the horizontal connection between the vertical standards of a Layher Allround scaffold. The ledger carries the deck sections and provides stability and strength to the structure. Thanks to the rosette connection, assembly is quick and secure: just one hammer blow and the ledger is firmly locked in place. The length of 1.09 meters makes this variant especially suitable for narrow façades, stair towers, and refurbishment scaffolds where longer ledgers do not fit. Iedpjw Ei R Asfx Ab Tjtd These pre-owned ledgers have been technically inspected and are fully operational. They may show minor signs of use or discoloration but are otherwise in good condition—a durable and cost-effective choice for both professionals and rental companies. Applications - Refurbishment and façade scaffolds - Indoor scaffolds or stair towers - Scaffolding structures with limited space - Combination with Layher Allround standards and deck sections

Condition: new, Year of construction: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm miter range horizontal: 45°-90°-25° Miter range vertical: 60° - 90° - 30° Pivot adjustment with crank: yes Iedpjizkhvsfx Ab Tjtd roller conveyor / support table: yes Saw blade diameter: 420 mm Speed: 2800rpm Engine power: 3 kW Motor brake: yes Suction connection: 100mm Length roller conveyor: 2 x 1500 mm Machine length: 4000 mm Machine width: 1250 mm Machine height: 1550 mm Weight:

Condition: used, New Diesel Generator Set, Power Generator, Emergency Generator DAEWOO Model DAGFS 100 New, unused Rated Power: 100 kVA Continuous Power: max. 80 kVA Ijdpsx Srv Isfx Ab Tjtd Standby Power: 110 kVA / 88 kW Rated Current: 33 Amp. Voltage: 400/230 Volt, 50 Hz 230 Volt, 50 Hz Fuel Consumption: 135-liter tank capacity for up to 8 hours of operation at 75% load Fuel consumption at 75% load: approx. 16 liters/h Fuel consumption in standby: approx. 7 liters/h Drive Engine: Diesel inline engine RICARDO type R6105AZD Engine Power at 1500 rpm: 100 kW Engine Power at 1800 rpm: 110 kW Tank Capacity: 135 liters - Simple and compact design with sound-insulated metal enclosure - Forklift pockets for easy and safe forklift handling - 3x CEE 16 Amp sockets (3-pin, 230 Volt) - 1x CEE 32 Amp socket (5-pin, 400 Volt) - Terminal blocks for cable power connection to external consumers, e.g. construction site power distributor - ATS module for mains backup operation, automatic emergency power switchover in case of power failure - 2 starter batteries, 12 Volt, for 24 Volt starter Required space: L x W x H 2700 x 1050 x 1430 mm Weight: 1400 kg Brand new machine from stock

Condition: new, Year of construction: 2023, functionality: fully functional, The symbol par excellence of the pallet wrapping machine is the robot: simple operation, flexible application options and good productivity make it the ideal product for companies of all kinds. Our latest generation of hard-working robots have been specially developed to meet a wide range of packaging requirements. Designed to move skillfully in all industrial environments. It can wrap a pallet in less than a minute while stabilizing light, fragile, deformable and irregular loads. Itsdpfxjr Nc Swe Ab Tjd Minimum pallet dimensions: 600x600mm Pallet height: 2,200mm Minimum pallet weight: 45kg

Year of construction: 2023, condition: new, Chopping height max. mm. 200 Infeed width mm. 500 Infeed rollers piece 3 Rotor flight circle mm. 600 Chopping length approx. mm. 20-30 output - output 16 - 20 rm/h chipping Chipper blade piece 2 Feed motors kW 2x2,2 Weight approx. net kg 4100 Inlet : horizontal machine base : steel, inert gas welded Rotor : steel, inert gas welded, dyn. balanced. Bearing : Oversized roller bearings. Iodencd Azjpfx Ab Tjtd Bearing housing : Steel, flanged housing. Feed rollers : steel, special toothed. Chip outlet : underneath the machine. Machine grate : (sieve) for secondary crushing of excess lengths. Drive pulley : Matched to main motor N=1500 min-1 Hydraulic system : consisting of: Hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting of the upper feed roller. Feeding : by 2 gear motors, Make NORD GEAR

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, DGUV certified until: 03/2027, type of input current: AC, pastry freezer stainless steel version for 20 trays 600 x 400 Digital temperature display from -10 to - 22°C Energy saving system EHT Freezer ready to plug in with 20 pairs of support rails Freezer with refrigerant R 290/656R A Connection 230V/600Watt Dimensions: 675 x 850 x 2040 mm, WxDxH Iedpfsm Trlkox Ab Tetd 24 months warranty We have a TOP selection of bakery machines!

Condition: excellent (used), Used container system, dry, sealed, clean, like new condition - Consisting of 5 containers = approx. 64 m² - Interior walls made of metal - 100 mm insulation - Ideally suited as an open-plan office, start-up space, rental station, shop, warehouse, etc. Dimensions per container: Length: 4.60 m Width: 2.50 m and 3.00 m External height: 3.15 m Internal height: 2.70 m Equipment: - Double-leaf entrance door with floor-to-ceiling glass element - 1x emergency exit door - Plastic windows with insulated glazing and tilt/turn function - Roller shutters - WC compartment with washbasin – unused - Air conditioning for heating and cooling - Wall cladding - Ceiling cladding Iodpfx Ajyr Srnob Tjtd - Cover plates for transitions - Documentation available Loading and transport can be organized. We only respond to serious and legitimate inquiries that include your name, email address, and telephone number.

Condition: good (used), Year of construction: 1996, Weinig Unimat 23 four-side planer - German production - grooved top - year of production 1996 - pulling rollers in the table top Itedpfxoh Dwl De Ab Tjd TECHNICAL PARAMETERS: planed width 230 mm planing height 160 mm grooved top spindle diameter 40 mm 1 lower spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 11 kW 5 lower spindle 7.5 kW feed smoothly adjustable 6-36 m / min 5.5 kW feed motor power six top steel pulling rollers two upper rubber pulling rollers three pullers in the table top pneumatic feed pressure pneumatic shoe clamp spindles with brakes pre-table length 1970 mm electric height adjustment central lubrication (split) diameter of nozzles 140 mm dimensions of the machine (length / width / height) 410/200/180 cm weight ~ 3000 kg

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,700 kg, fuel type: diesel, color: original, power: 18.39 kW (25.00 HP), motor manufacturer: Perkins, maximum load weight: 1,000 kg, gearing type: automatic, axle configuration: 4x4, suspension: other, tire condition: 100 %, number of seats: 1, brakes: other, lifting power: 1,000 kg/m, shovel volume: 1 m³, digging bucket width: 360 mm, emission class: euro5, Equipment: additional headlights, adjustable chassis, all wheel drive, cabin, crane, cruise control, gripper hydraulics, hammer hydraulics, hydraulics, low noise, onboard computer, pallet forks, rear pickup, standard shovel, NEW, PERKINS COMBINATION EXCAVATOR - BRAND NEW!! NEW!! NEU!! NEW!! NET PRICE: €18,900 FOR BUYERS IN THE EUROPEAN UNION!! FÜR KÄUFER DER EUROPÄISCHEN UNION!! THE MACHINES ARE LOCATED IN MAJSKE POLJANE, GLINA!! PRICE: €18,900 NET + VAT IN CROATIA. OUTSIDE OF CROATIA, VAT IS NOT PAYABLE!! WEIGHT: 2,700 KG WIDTH: 1.65 m LENGTH: 5.00 m HEIGHT: 2.40 m WORKING REACH OF REAR HYDRAULIC DIGGING ARM: 3.50 m DIGGING BUCKET: 33 CM. VARIOUS BUCKET SIZES, HAMMER, ETC. AVAILABLE FOR PURCHASE. Itsdpfjw Tkmyox Ab Tjd FRONT LOADING BUCKET WITH QUICK COUPLER. 0.800 m2. PALLET FORKS, QUICK COUPLER!! I ONLY RESPOND TO SERIOUS INQUIRIES. PLEASE, SERIOUS CALLERS ONLY. NO EXCHANGES, NO ACCOUNTS, ETC. ACCEPTED. BANK LOAN OR LEASING OFFERS AVAILABLE UPON REQUEST. ALSO OFFERING: - KUBOTA: €18,900, approx. 3 tons - YANMAR: €27,900, approx. 3.7 tons