Workpiece carrier

Strothmann FW KFW RS25 5T

Year of construction: 2007, condition: good (used), Used 4.4kw Bystronic Byspeed CNC laser for sale Used Bystronic 4.4kw lasers for sale VIDEO BELOW: Byspeed 3015 4.4kw Installed new/year: 2007 Manufacturer: Bystronic Hedpfxsgwa Swe Amisl Model: Byspeed 3015 Sheet size: 3metre x 1.5metre / 3000mm x 1500mm Laser power: 4.4kw / 4400 watt Control: ByVision CNC02 Automation n/a Year: 2007 Condition: good working condition / service from new Byspeed 3015 4400w March 2010 Power on: 44,189 hrs Cut time: 20,490 hrs Good condition machine that has been covered from new by service contract with Bystronic UK. Options Included: Bypos automatic focus CutControl 2 cutting heads Tools and accessories Torit Dust collector Delivery, installation and tuition available at extra cost.

Condition: used, Year of construction: 2016, machine/vehicle number: 0605-240010, FICEP Flex FRC 1201 coping robot The Ficep FRC 1201 coping machine is part of the latest process in automatic CNC controlled thermal coping process. This modern CNC-controlled coping robot system is suitable for fast thermal cutting and notching of profile types H / U / L / flat and square tubes. The steel profile is positioned in the system at the position to be cut using a pulling gripper measuring carriage via the roller conveyor. A robot arm with the cutting units (oxyfuel or plasma) cuts the profiles at the selected position. The cut or notched finished components either fall into the collecting tray or are pushed out of the system by the measuring arm. Thermal cutting units: This Ficep profile support notching system Flex FRC 1201 is equipped for thermal cutting with oxyfuel and/or plasma. A Hypertherm HYPERFORMANCE PLASMA HPR 260 XD suitable for material thicknesses up to 32 mm is used as the plasma power source. Thicker material thicknesses or phase cuts greater than 32 mm are cut with the oxyfuel cutting unit. Hodpetwm Ubsfx Amijl Transport system: On the infeed side in front of the Ficep Flex FRC notching system is a chain drag cross conveyor with a length of 11,150 mm. The profiles (components) can be conveyed in both directions. The profiles are then transported into the machine on a stable roller conveyor with a gripper measuring carriage. The system is designed for 12 m long profiles and therefore has 12 m roller conveyors with a roller conveyor width of 1. 300 mm on the infeed side and 12 m on the outfeed side.300 mm. 4 chain tractors with a length of 6,450 mm are available after the notching system to transport the finished components to the outfeed side. Mitrol CNC control and Pegaso software: The system is controlled by a modern CNC control system from Mitrol. The reliable CNC control is from Ficep's own manufacturer Mitrol with the Pegaso software including remote maintenance option and data transfer interface. Torit DCE filter unit The filter unit for the dirt extraction is from Donaldson Torit DCE Safety: via fence and light barriers Max. profile cross-section: 1,220 mm. Profile cross-section : 1,220 x 600 mm Min. material length : 2,500 mm Working height : 865 mm Weight: 7000 kg Weight of cover firing unit : 1200 kg This modern Ficep Flex FRC 1201 coping robot system is in very good condition.

Year of construction: 1991, condition: good (used), machine/vehicle number: 166, Offer 22014 Technical data: - max. working width 4080 mm - max. cutting capacity St 40 6 mm - hydr. cutting angle adjustment - man. Cutting gap adjustment - stroke rate depending on cutting angle and cutting length approx. 20 - 25 per/min - backgauge with positioning control ELGO 10 - 1000 mm - Cutting length adjustment Hedpfeh N U Hpjx Amiol - 17 pcs. hydraulic hold-downs - front angle stop - front support arms - drive 400 V / 9 kW - foot switch - Space requirement without support arms approx. W 4450 x H 1900 x D 2300 mm - weight approx. 10500 kg

Condition: good (used), Year of construction: 2016, FICEP 1201 FRC Minimum Profile mm 80 x 42 Maximum Profile mm 1220 x 60 1 x OXY FUEL Cutting Head Hjdpova Hfnofx Amijl 1 x HYPERTHERM HPR 260XD Plasma Torch. Dust extraction system.

Year of construction: 2010, condition: ready for operation (used), Max. sheet dimensions: 6050x2550mm, max. cutting speed: 10m/min, length: 8125mm, width: 3800mm, height: 1900mm, with documentation, an on-site inspection is possible. Hjdpfx Aori Skajmiol

Condition: good (used), Welding edge former, welding edge former, weld seam preparation, welding edge forming machine, edge milling device, edge milling machine, mobile milling machine -Bevel length: max. 20 mm -Dimensions box: 460/360/H355 mm Hodpfx Aod Izt Ssmiel -Weight: 24 kg

Year of construction: 1993, condition: reconditioned (used), TECHNICAL FEATURES: Press Model: T80 FNAR Hsdpek Rbykofx Amijl Serial number: 8932 Year of construction: 1993 Nominal force: kN 800 Weight: Kg. 5.000 Nominal number of strokes: 60 min. Operating air pressure: BAR 5.5÷6 Installed power: 4 kW Max stroke: mm.100 Hammer adjustment: mm.60 Stop position: P.M.S Voltage: V 380 Frequency :50Hz Auxiliary voltage: V 24 NEW COMPONENTS INSTALLED: • Pedal board; • Two-hand command; • Safety valve; • Accident prevention guards with safety keys

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Machine has very low hours Hjdpfx Aev Iaqyomiol

Condition: used, Year of construction: 1990, table length 3000 mm table width 2500 mm Hsdpfeftfcwsx Amisl table height 300 mm total power requirement 0 kW weight of the machine ca. 5,2 t dimensions of the machine ca. 3 x 2,5 x 0,3 m