Contact person: Herr Edward Wanders
Lichtenhorststraat 37
6942 GS Didam, Netherlands
Last online: Yesterday
Registered since: 2010
The TOC Trens turning lathe has approximately 23000 working hours. Well maintained local.
Make: TOS Trens
Type: SN 500 S
Year: 2000
Made in Slovakia
Specifications:
Vgn7pieo
Swing over bed: 505 mm
Swing over cross slide: 270 mm
Swing in the gap: 700 mm
Spindle bore: 77 mm
Distance between centres: 2000 mm
Power: 7,5 Kw
Control: Conventionel
Spindle speeds / ranges: 2000 Rpm
Dimensions:
Length: 4100 mm
Width: 1250 mm
Height:1800 mm
Weight:2000 Kg.
Notes:
Turning Lathe has always been well mai... more
|
1 Steady rest with Rollerpinoles for SN 71C or SN 710 S
Hyl7qwb
Capacity 180 - 320 mm
Watch machinepicture steady on machine more
|
|
|
SN 50 C x 2000 YOM 2019
Steady rest with rollerpinoles
Longitudinal Bedstop
Ttgpanezk
Lowest Price in Europe ! more
|
Hessisch Lichtenau, Germany
![]()
dealership location
1988
used
L + Z Lathe STRUNGURI ARAD Type SN 501 x 1500 P
Masch. No. 88SN5P200 1988 built
Tip width 1500 mm
Turning diameter over bed 510 mm
Peak height above bed 255 mm
Peak height above support 160 mm
Spindle bore 65 mm
Spindle speed 32-1600 rpm 18 steps
Feed flange Short cone of 139 mm according to DIN 55027 size 8
Riding stock inner cone MK 5
Drive power 7.5 kW
Mains connection 400 volts, 50 Hz
- Spindle speed over 18 gear stages
- automatic feed longitudinal and flat
- 3-jaw rotary chuck of 315 mm (w... more
|
Very nice lathe.Centre height: 265 mm.Distance between chuck and pin: 1500 mm.Centre bore: 65 mm.Gap: 300 mm x Ø 780 mm.24 speed gearbox. 16-1600 rpm.
Nfoa2 more
|
|
Code 71139
DESCRIPTION CNC Center lathe with 2 axis
Make P B R
Model T 30 SNC x 1500
Vb3u77of
S/N 30 H / 87
Year 1996
Control Siemens Sinumerik 805
Distance between centers 1500 mm
Max. swing 630 mm
Max. swing over slide 330 mm
Spindle bore 105 mm
Spindle speed in 2 ranges stepless ( in program ) 7 – 310 / 44 - 2000 rpm
Motor power 15 kW
Connected load 33 KVA
Machine weight 5500 kg
Accessories 8 ATC Duplomatic toolholder R 10
Hydraulic 3 chuck Ø 315 mm
1 fixed steady wit... more
|
circulation-Ø: ueber Bett 700 mm
max. turning-Ø: 350 mm
max. center distance: 1500 mm
spindle boring: 105 mm
spindle speed: 48 - 2000 rpm
quick motion x-axis: 6,5 m/min
V303c
quick motion z-axis: 8 m/min
spindle drive: 400 V, 15 kW
space needed: ca. 4400 x 2050 x 1820 mm
weight: 5400 kg more
|
Spoettrup, Denmark
![]()
dealership location
good (used)
Very nice lathe.
Centre height: 265 mm.
Distance between chuck and pin: 1500 mm.
Centre bore: 65 mm.
Gap: 300 mm x Ø 780 mm.
24 speed gearbox. 16-1600 rpm.
Electric start/stop + electric rapidfeed.
3 jaw chuck + 11 sets of jaws.
Tool holder base + 2 holders.
Price includes loading on truck.
Cheap transport can be arranged.
Bolt in handle for crossslide is broken on the pictures I have fixed that.
8edfghhhk more
|
|
circulation-Ø: ueber Bett 625 mm
F9zyi3d
max. center distance: 1500 mm
spindle boring: 105 mm
spindle speed: 6,6 - 2000 rpm
space needed: 4400 x 2050 x 1820 mm
weight: 5200 kg more
|
Wiefelstede, Germany
![]()
dealership location
used
|
Make Diosna GmbH Osnabrück, Type KAN-10, No 259-008, New "unknown", Material Stainless steel, Hot/Cold mixer , Hot mixer , Capacity warmmixer 10 Ltr, Vessel sizes dia.240x230mm, With jacket , With motor 7,5 KW 380/660 Volt, Pneumatic operated outlet , Outlet dia. 100mm, Cold mixer , Capacity 25 Ltr, Vessel sizes dia. 440x220mm, With motor , With lump breaker , Motor 2,2 KW, 380 Volt, With switchgear , Floorspace 2,1X1,0 M, Total height 1,5 M, Weight 820 KG What you can expect from Foeth: all our... more
|
TECHNICAL DETAILS
• Sheet dimensions: 3000×1500
• Rapid feed: 120 mt/1m
• Acceleration: 3g (600 fori al minuto)
• Double table
• CNC Bystronic
Coovr0ki
• Panel PC withWindows
• Aspirator Donaldson DF Pro
• Chiller Furrer WKL 430
• Bypos (focal automatic)
• Cut control
• Cutting head 5″
• Cutting headf 7.5″
• Building year 2005 more
|
Make: STRIFFLER
Type: 2766
Year of construction: 1982
C7nbb0z
Dimensions: approx. 0.8 x 0.8 x 1.2 m
All information without guarantee.
A demonstration is in our showroom at any time more
|
floor-plate length: 5500 mm
plate width: 1500 mm
plate height: 250 mm
weight of the machine ca.: 6,5 t
space requirements of the machine approx.: 5,5x1,5 m
- distance of T-slots = 542 / 500mm in a parallel offset order
- T-slot according DIN 650
- a=28,0mm; h=48,0mm; b=48,0mm; c=22,0mm
7nkeq9bbe
- incl. adjustment screws and covering caps
[...] more
|
Max. Cutting length: 1500 mmMax. Cutting thickness: 2.5 mm SteelMan. Backgauge up to 500 mm Side gauge and table extensionSharpened blade
Bdwsthoxhx more
|
Wiefelstede, Germany
![]()
dealership location
used
|
table length 1500 mm
table width 1000 mm
Bfvyyxfr7a
table height (lateral area) 100 mm
weight 281 kg more
|
length: mm
width: 2000 mm
height: 3000 mm
depth: 1800 mm
Cojtclh7m
weight: 10,3 pro Winkel t
2 clamping angles of the same size made of steel are available for sale. ( price per piece)
Steel construction, welded, surface finished.
Size of the angle: W: 2000 x D: 1800 x H: 3000mm
Clamping surface vertical: H:3000xB:2000mm
Holes on/in clamping surface 400 x 50 and 200 x 53mm, with M30 threaded holes and through holes
Clamping surface base stand: W:2000 x D:1800mm
Clamping hole Ø 51mm drilled in... more
|
Cutting size: 3000x1500 mm
Plasma unit: Hypertherm Powermax 1000 ( 60 A)
Max cutting thickness: 15 mm
Video is available
2rnhi3
Machine can be inspected under power more
|
Wiefelstede, Germany
![]()
dealership location
used
Workbench, worktable, assembly bench
-Width 1500 mm
-Depth 800 mm
-Height 820 mm
7gurj0ye
-4 x drawers
-hohenverstellbar
-Weight 72.5 kg more
|
Soerendonk, Netherlands
![]()
dealership location
good (used)
Naxos Union cylindrical grinding machine offered.
Type: RP 300-1500
Turning length: 1500 mm
Bg8okrp3m
Turning diameter: 300 mm
Speed object: 20-340 RPM
Speed grinding stone: 1000, 1230 RPM
Max. diameter grinding stone: 600 mm
Included 4x grinding stone, tools and documentation
Dimensions: 455x180x155 cm (LxWxH)
For more information call us or send an e-mail. more
|