Truck mounted crane

VOLVO FH500 6x4 Fassi F545RA 2.27 mit Jib und Winde

Condition: new, power: 375 kW (509.86 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, loading space width: 2,470 mm, loading space length: 4,250 mm, Year of construction: 2025, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, VOLVO FH500 6x4 with FASSI F545RA2.27 and L214 Jib and Cable Winch Liftable drive axle Liftable axle Drive axle RTS2370A. Tandem, single reduction, hypoid type. Longitudinal and transverse differential locks. Front axle load max. 10.0 t (technical) Rear axle load max. 21 t (technical) Volvo Dynamic Steering (VDS) 330 L aluminum tank, right side AdBlue tank usable volume 64 liters Rockinger 50 trailer coupling, for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, Step E - onboard diagnostics Cab color: Signal White Heated and electrically adjustable rearview mirrors, wide-angle mirrors on both sides, ramp mirror on passenger side Front mirror Exterior sun visor LED main headlights Bjdpfxox A Nn Ts Agcolr Headlamp cleaning system Automatic switching between daytime running and dipped beam Automatic headlight leveling LED daytime running lights, “V-light” Front LED fog lights Static LED cornering light Two LED roof beacons (orange), mounted front of cab roof Cab roof penetrations, both sides Wiring for roof-mounted spotlights, max 280 W 2 air horns on the roof, controlled from steering wheel Roof antenna and CB radio preparation Accessory mounting rail, front Original manufacturer emblems/type designations Emission type plate (Euro...) L-plate (low noise vehicle -96) Flatbed body as steel/welded construction, permanently mounted, low-profile design Length approx. 4,800 mm, width approx. 2,480 mm Removable aluminum side boards, Suer brand, height 600 mm, anodized, both sides (right and left) Removable aluminum side boards, Suer brand, height 600 mm, anodized, both sides (right and left) Recessed lashing rings, 2,500 daN and 6,500 daN each side, in profiled slots with flexible positioning 6 stakes pockets per side (3 per side) Hydraulically extendable bed extension, approx. 1,200 mm, hot-dip galvanized, loadable up to 3,000 kg, extendable with lighting and underrun protection, deeply recessed if possible, radio remote-controlled Sturdy front wall consisting of welded frame with recessed stake storage pockets Cladding plates, mudguards in checker plate, sand-blasted and powder-coated and painted in vehicle color Toolboxes between the rear axles with checker plate 5 toolboxes, checker plate natural finish, manufacturer BROSSBOX with ventilation. Size and arrangement depend on wheelbase and available space Sand-blasted, powder-coated and painted in vehicle color Installation of underrun protection at the rear and additional outriggers, including installation of all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics F545RA.2.27 xe-dynamic » Base unit Winch type V 20 for twin-line operation with folding sheave and accessories. Infinite slewing range All hydraulic cylinders double acting Piston rods hard chromed Double linkage system with PROLINK (knuckle boom can be over-extended by up to 15°) Electronic overload cut-off system with FX500 FASSI stability control FSC-S/II incl. LMB II Emergency shutoff and optical alarm at 90% and 100% Pressure relief and load-holding valves XF system (Extra Fast) + XP system (Extra Power) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning in the display Danfoss D850 valve block with 4 control valves mounted on crane column Emergency operation for crane control High-pressure filter supplied plumbed Separate hydraulic tank (180l) with filter

Condition: new, power: 375 kW (509.86 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, loading space width: 2,470 mm, loading space length: 4,250 mm, Year of construction: 2025, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, VOLVO FH500 6x4 with FASSI F545RA2.27, L214 Jib, and Winch Liftable drive axle Liftable axle Drive axle RTS2370A. Dual-axle single reduction, hypoid type. Longitudinal and transverse differential locks. Front axle load max. 10.0 t (technical) Rear axle load max. 21 t (technical) Volvo Dynamic Steering (VDS) 330 L aluminum tank on the right AdBlue tank usable capacity 64 liters Rockinger 50 trailer coupling, for towing eyes with 50 mm diameter Bledpsx A Npdjfx Agcsr Electrical connection for trailer, 15-pin Euro 6, Stage E - Onboard diagnostics Cab color: signal white Heated and electrically adjustable mirrors, wide-angle mirrors on both sides, kerb mirror on passenger side. Front-view mirror Exterior sun visor LED main headlights Headlamp cleaning system Automatic light switching between daytime running and dipped beam Automatic headlamp leveling Daytime running light LED, "V-light" LED front fog lights Static LED cornering light Two LED beacon lights (orange), mounted on the front of the cab roof Cab roof pass-throughs, both sides Pre-wiring for roof-mounted headlights, max 280 W 2 air horns on the roof, controlled from the steering wheel Roof antenna and CB radio preparation Roof bar for accessories, front Emblems/type designation factory-mounted Emission type plate (Euro...) L plate (low-noise vehicles -96) Flatbed executed as steel/welded construction, fixed-mounted, low design. Length approx. 4800 mm, width approx. 2480 mm Removable aluminum drop sides, make Suer, height 600 mm, anodized finish, per side (R and L) Removable aluminum drop sides, make Suer, height 600 mm, anodized finish, per side (R and L) Recessed lashing rings 2500 daN and 6500 daN per side, in slotted profile with flexible positioning 6 x stake pockets for stanchions (3 per side) Hydraulic extension of the flatbed up to approx. 1200 mm, galvanized, loadable up to 3000 kg, extendable with lighting and underrun protection, as low as possible, operable via radio remote control Robust front wall made of welded frame with recessed stanchion depot pockets Cladding panels, fenders made of tread plate, sandblasted, powder-coated and painted in vehicle color Toolboxes between rear axles fitted with tread plate 5 pcs. toolboxes, natural finish tread plate, manufacturer BROSSBOX with ventilation. Size and arrangement depend on wheelbase and available space. Sandblasted, powder-coated and painted in vehicle color. Mounting of rear underrun protection and additional stabilizer, including installation of all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics F545RA.2.27 xe-dynamic » Base unit Winch type V 20, for double-strand operation with folding pulley and accessories. Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chrome plated Double knuckle lever system with PROLINK (overbending articulation up to 15°) Electronic overload cut-off device with FX500 FASSI stability control FSC-S/II incl. LMB II Emergency stop, as well as optical alarm (90% and 100%) Pressure relief and load-holding valves XF system (Extra Fast) + XP system (Extra Power) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning on the display Danfoss D850 control block with 4 control valves mounted on the crane column Emergency control for crane operation High-pressure filter supplied pre-piped Separate hydraulic tank (180 l) with filt