CNC Lathe

WEILER Commodor 80 CNC

Condition: like new (used), Functionality: fully functional, Weiler Commodor guide and feed spindle lathe with 3-axis digital display K&C NEW Overhauled with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 2020 >> Center height 180 mm >> Center width 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle passage 56 mm >> Short taper spindle head DIN 55029 size 5 >> Tailstock MK 4 >> Feeds from 0.026 to 0.888 mm / rev >> Possible threads metric, inch, module and diametrical pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake can be switched on >> Drive power 2.0/4.0 KW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction, >> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws >> Mulifix size B with 2 pcs steel holders NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops Gjlovrckqohcdw Djud On request: covers for the guide. and feed spindle About the machine: A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint. The Multifix and chuck accessories are new. For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. The Weiler runs very quietly even at high speeds. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: like new (used), Year of construction: 2013, operating hours: 150 h, WEILER COMMODOR 230 AC / CE marking / 3-axis digital display WE HAVE TWO AVAILABLE TO PURCHASE Hours from new 150! -Year 2013 -Tip height 230mm -Tip width 1000mm -Rod passage 56mm -Turning diameter over bed 475mm Guolhcewwli Ssdw Dsd -Turning diameter via face slide 270mm -Speed range 25-2000 rpm (infinitely variable above potentiometer) -Automatic longitudinal/flat feeds -Thread / Metric / Inch /Pitch -Tailstock MK4 -Quick-change holder with insert -New three-jaw chuck 200mm -Lining protection electric -2xNot/Off -Coolant device -Swarf back wall -Spindle protection -Documentation Dimensions: LxWxH 2.6x1.5x1.7 meters / Weight 1800Kg

Condition: good (used), Year of construction: 1996, Functionality: limited functionality, machine/vehicle number: 027, turning diameter over cross slide: 830 mm, turning length: 3,000 mm, spindle bore: 128 mm, total height: 2,200 mm, total length: 5,800 mm, total width: 2,100 mm, overall weight: 10,500 kg, For sale is a well-maintained Weiler lathe, type E110 /3 CNC, including steady rest. Condition and equipment as shown in the pictures. Guolhcdwjwwt S Is Ded

Condition: ready for operation (used), Year of construction: 1989, Functionality: fully functional, machine/vehicle number: 120160, turning length: 925 mm, turning diameter: 480 mm, total height: 1,990 mm, total length: 3,350 mm, total width: 1,800 mm, power: 0.032 kW (0.04 HP), Equipment: documentation/manual, From trade-in from a long-standing existing customer Guoloqy Edgjhcdw Djd

Condition: excellent (used), Year of construction: 1991, Weiler Commodor 230 Lathe – Precision & Performance Made in Germany For sale is a high-quality centre lathe with leadscrew and feed shaft from the renowned manufacturer WEILER – model Commodor 230. This machine features a robust construction, high precision, and is ideal for workshops, repair centres, or manufacturing environments. ⸻ 🔧 Technical Specifications: - Centre height: 230 mm - Distance between centres: 1000 mm - Swing over bed: 475 mm - Swing over cross slide: 270 mm - Spindle bore: 56 mm - Speed range: 25 – 2000 rpm - Tailstock taper: MT4 ⸻ ⚙️ Equipment: - 200 mm 3-jaw chuck - Quick-change toolpost with multiple inserts - Automatic longitudinal and cross feeds Gjlhcowu Ikgjdw Djud - Thread cutting: metric, imperial, module, diametral pitch - Coolant system - Chuck guard (safety cover) - Chip guard at rear - Work light - Emergency stop switch - Machine leveling feet - Comprehensive documentation (circuit diagrams, operating manual, etc.) ⸻ ✅ Condition: The machine is in very good used condition. It has been regularly serviced, is fully operational, and can be demonstrated under power.

Condition: new, Lead & feed screw lathes WEILER COMMODOR 180 GSD -New machine / Exhibition machine / Unused -3-axis digital readout -CE marking -Centre height 180 mm -Distance between centres 1000 mm -Spindle bore 56 mm -Swing over bed 380 mm -Swing over cross slide 215 mm -Speed range 25 - 2000 rpm -Automatic longitudinal / cross feeds -Thread cutting / Metric / Inch / Diametral -Tailstock quill taper MK4 -Tailstock quill stroke 150 mm -Coolant system -Multifix quick-change toolpost with insert Guolhcdwewucv Ro Djd -3-jaw chuck 200 mm -Work lamp -Chip guard rear panel -Documentation Dimensions: LxWxH 2.4 x 1.4 x 1.7 metres / Weight 1700 kg Subject to errors and omissions.

Condition: like new (used), Functionality: fully functional, Weiler Commodor guide and feed spindle lathe with 3-axis digital display K&C NEW Overhauled with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 1824 >> Center height 180 mm >> Center width 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle passage 56 mm >> Short taper spindle head DIN 55029 size 5 >> Tailstock MK 4 >> Feed rates from 0.026 to 0.888 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake can be switched on >> Drive power 2.0/4.0 KW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction, >> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws >> Mulifix size B with 2 pcs steel holders NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: covers for the guide. and feed spindle About the machine: Gslhcdwovrcqde Dsud A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint. The Multifix and chuck accessories are new. For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. Even at high speeds, the Weiler runs very quietly. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: used, turning length 1000 mm turning diameter over bed 380 mm turning diameter over slide rest 190 mm number of spindle speeds 63 - 2000 U/min. turning speeds 18 Stk. spindle bore Ø 56.0 mm tailstock quill taper MT DIN 228 / MK 4 quill stroke 150 mm bed width 310 mm spindle taper DIN 55027 / 6 feeds - longitudinal 0.022 - 0.8 mm/U feeds - cross 0.011 - 0.4 mm/U thread M 0.3 - 10.0 mm bed width 305 mm voltage 380 V total power requirement 4.0 kW weight of the machine ca. 1600 kg range L-W-H 2320 x 1400 x 1600 mm Machine from a maintenance workshop Lathe with a precision-ground and induction-hardened bed. Very suitable for use in workshops and training centers, for example. Equipment: - Robust centerline lathe - GIVI MISURE "ME 8202" digital display, front left - RÖHM three-jaw chuck, Ø 200 mm - FORKARDT three-jaw chuck, Ø 200 mm - FORKARDT four-jaw chuck, Ø 200 mm - 2 chuck keys Guslsv Rgwljhcdw Ded - Folding lathe chuck guard - MULTIFIX tool holder, size B, with 3 inserts - Movable tailstock - Chip guard, rear panel - 8 machine feet - 2 emergency stop buttons, front - Adjustable bed stop - Coolant system including coolant tray

Condition: excellent (used), Year of construction: 1997, Functionality: fully functional, Weiler Commodor lathe and leadscrew lathe with 3-axis digital readout from Weiler, very good condition!!! CE compliant Technical data: Guelhjwnd Rcjcdw Djd >> Year of manufacture: 1997, Machine no. 3456 >> Center height: 180 mm >> Center distance: 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle bore: 56 mm >> Short taper spindle nose DIN 55027 size 6 with bayonet lock >> Tailstock MK 4 >> Feeds from 0.026 to 0.888 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake engageable >> Drive power 2.0/4.0 KW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3-axis digital readout from Weiler >> Röhm wedge bar 3-jaw chuck 200 mm, 1 set of jaws >> Multifix B tool holder with 3 holders >> Bed stop >> Electronic spindle guard >> Coolant system About the machine: Offered here is a Weiler Commodor lathe in very good, fully operational condition. The Commodor is one of the largest manual lathes manufactured by Weiler. A very robust and powerful machine. The 3-axis digital readout from Weiler makes work even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine on-site under power. The machine is available immediately.

Condition: new, Year of construction: 2022, operating hours: 3 h, Functionality: fully functional, Commodor 230 VCD Lathe, NEW CONDITION The Commodor series has been the benchmark for long-term precision for decades. These field-proven, high-quality, and powerful production lathes are designed for universal use in industry, toolmaking, skilled trades, and education. Features: Center distance 1000 mm Center height 230 mm Automatic handwheel release Lead and feed screw covers Holding brake Toolmaking precision according to DIN 8605 Frequency converter and speed potentiometer for continuous speed control High drive power on the main spindle Large thread cutting range Digital speed display Convenient operation LED machine light WORKING AREA Center height 230 mm Swing over bed 475 mm Swing over cross slide 270 mm Center distance 1000 mm TURNING SPINDLE Spindle head DIN 55027/DIN ISO 702-3 Gr. 6 Spindle bore 56 mm Spindle diameter in front bearing 90 mm MAIN DRIVE Drive power 60%/100% duty cycle – / 11 kW Speed range 25 – 2,000 rpm Number of speeds: continuously variable FEED RANGE Number 320 Longitudinal 0.026 – 7.4 mm/rev Cross 0.013 – 3.7 mm/rev THREADING RANGE Metric threads 0.3 – 80 mm TAILSTOCK Quill diameter 70 mm Quill stroke 150 mm Internal taper DIN 228 MK 4 ACCEPTANCE ACCURACY DIN 8605 The WEILER screen display for the VCD series with constant cutting speed (V-constant) 3-axis display for Bed, cross, and top slides Direct speed input and display Constant cutting speed Freely selectable speed limit (lockable via key switch) Oriented spindle stop Tool technology memory for 99 tools Power display in percent (graphic) and kW Axis display deactivation via key switch (for training purposes) Accessories RÖHM three-jaw chuck 250mm RÖHM three-jaw lathe chuck DURO-M, DIN 55027 Fixed steady rests 5 x Multifix size B Movable chip guards Gelhev Tv R Hscdw Doud Numerical position indicators About the machine: Offered is a Weiler Commodor 230 VCD lathe in new condition. The Weiler has 3 spindle hours. The machine is CE-compliant. Take advantage of the opportunity to view and try out this machine on-site under power.