Mersing Group

Condition: good (used), Year of construction: 1996, functionality: fully functional, turning diameter over cross slide: 200 mm, turning diameter: 410 mm, spindle bore: 54 mm, spindle speed (max.): 3,000 rpm, overall weight: 2,100 kg, center width: 950 mm, center height: 200 mm, Equipment: documentation/manual, Dear Sir or Madam, We offer for sale a WEILER E35 CNC cycle lathe. The Siemens 805 cycle control and electronic handwheels make operation very simple and extremely convenient. The machine has been thoroughly inspected in our workshop, is in fully functional condition, and is available for a power-on test at any time. We look forward to your inquiry! Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly checked - All lubricants and, where necessary, worn components are replaced in advance - On request, we can completely or partially overhaul the selected machine for you - You can freely choose the paint color of your selected machine - Additional accessories such as tools can be ordered directly if required - On request, we can install further accessories such as safety devices - We are happy to take care of shipping and/or installation for you Iajdpfxjyaluls Ahysl

Condition: used, functionality: fully functional, machine/vehicle number: FN475015, Year of construction: 2014, operating hours: 5,540 h, load capacity: 3,000 kg, lifting height: 6,500 mm, free lift: 200 mm, fuel type: electric, fork length: 1,200 mm, Equipment: cabin, pallet forks, sideshift, Electric front forklift with charger, full cab, heater, and fork positioner Iajdpfx Ahjyalufeyel

Condition: good (used), axle configuration: 3 axles, first registration: 10/2014, suspension: air, Year of construction: 2014, Equipment: ABS, = Additional Options and Accessories = - EBS - Rear doors - Lift axle - Air suspension = Further Information = Suspension: Air suspension Rear axle 1: Lift axle Unladen weight: 6,120 kg Payload: 32,880 kg Gross vehicle weight: 39,000 kg Tipper: Rear Technical condition: good Optical condition: good Please contact Emad Al Shogran for further information. Vehicle number: Lück / 3 x SAF axles / Steel-Aluminum / Lift axle / 50 m³ .: W09SKM335ESL41367 F.1 Technically permissible total weight in kg: 39,000 G Unladen weight: 6,120 kg Lift axle 3 x SAF axles Steel-Aluminum 50 m³ = Company Information = Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Iajdsyalthepfx Ahyol Email.

Condition: good (used), axle configuration: 3 axles, first registration: 03/2020, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, suspension: air, Year of construction: 2020, Equipment: ABS, = Additional Options and Equipment = - EBS - Rear doors - Air suspension = Further Information = Iedsyalr Repfx Ahysal Suspension: Air suspension Rear axle 1: Steered Curb weight: 6,839 kg Payload: 32,161 kg Gross vehicle weight: 39,000 kg Technical condition: good Visual condition: good Please contact Emad Al Shogran for more information. Vehicle number: Semi-trailer. Krone / Edscha / 3 x PBW axles / Steering axle .: WKESD00000916952 Edscha Disc brakes PBW Curb weight: 6,839 Gross weight: 39,000 Internal dimensions Length: 13.62 m Width: 2.48 m Height: 2.70 m = Company Information = Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, input voltage: 400 V, overall weight: 590 kg, type of input current: three-phase, power: 5.4 kW (7.34 HP), Manual Lisec 2-k sealing machine TAL-50PS/B for Polysulfide. The machine is completely overhauled and therefore in excellent condition. As new. power: 3N/PE 400V 50Hz Load: 5,4kW The machine can be seen in our overhaul warehouse in Oroshaza/Hungary on appointment. Iajdpfxjyalq Tj Ahyjl

Condition: ready for operation (used), Year of construction: 1999, This TORNOS DECO 2000/13 was manufactured in 1999. It features a bar passage of 16 mm and supports up to 20 fixed and 16 rotating tools. Equipped with an IEMCA loader, CONVEYORS IND. ASS. conveyor, and additional oil filter tank, this machine ensures efficient operation. Consider the opportunity to buy this TORNOS DECO 2000/13 swiss type turning machine. Contact us for more information about this machine. Iajdpfsyalqmox Ahyel Additional equipment • Loader • Conveyor • Additional Oil Filter Tank • Additional Oil Filter Tank Machine Benefits Technical Machine Benefits • Bar passage: 16 mm • Maximum fixed tools: 20 • Maximum rotating tools: 16 Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 5,000 rpm, total height: 1,840 mm, overall weight: 3,040 kg, controller manufacturer: FANUC, controller model: 18i-TB, number of axes: 4, This 4-axis Schaublin 140R CNC horizontal turning machine was manufactured in 2008. It features a CNC Fanuc 18i-TB control, a maximum turning diameter of 300 mm, and a spindle speed range of 50 – 5,000 rpm. Equipped with a Y-axis and sub-spindle, it offers a turret with 12 driven tool stations. If you are looking to get high-quality turning capabilities, consider the Schaublin 140R CNC machine we have for sale. Contact us for more information. Additional equipment • Machine supplied with manuals and CE conformity declaration Machine Benefits Technical Machine Benefits Iasdpfjyalqgex Ahyol • Driven tool stations: 12 • Max tool size: 20 x 20 mm • Driven tool speed: 30 – 6000 rpm • Tailstock a2-3 • Possibility to mount 3-jaw chuck: yes • Recommended max turning diameter: 200 mm • Coolant system: tank capacity 180 l, pump capacity 20 l/min, pump pressure 6 bar • Max turning diameter: 300 mm • Recommended max turning diameter: 250 mm • Equipped with y-axis and sub-spindle Extra Information Machine still under power Dimensions Machine Depth 2650 mm

Condition: ready for operation (used), Year of construction: 2015, spindle speed (max.): 4,000 rpm, travel distance X-axis: 243 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 740 mm, overall weight: 9,600 kg, controller manufacturer: FANUC, controller model: 0i-TD, workpiece diameter (max.): 350 mm, swivel angle B-axis (max.): 830 °, This 4-axis Romi GL 350B was manufactured in 2015. It features a FANUC 0i-TD control unit, a maximum bar passage of Ø 64 mm, and a spindle speed up to 4,000 rpm. With a tool turret of 12 positions and rapid feeds of 30 m/min in X/Z and 18 m/min in Y, it's ideal for efficient turning operations. Consider the opportunity to buy this Romi GL 350B horizontal turning machine. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits Ijdpfx Aheyalqajyoal • Max. Bar passage: Ø 64 mm • Tool turret: 12 positions • Tool attachment: bmt-65 • Counterspindle speed: 6–6000 rpm • Spindle nose: a2-8 • Counterspindle nose: a2-5 Extra Information Machine still under power Dimensions Machine Depth 2080 mm

Condition: ready for operation (used), Year of construction: 2018, This Okuma Genos L 300E-MY-e was manufactured in 2018. A robust horizontal turning machine located in Italy, it features a 450 mm maximum swing and a workable length of 1020 mm. The spindle supports a speed of 3000 RPM with a bar capacity of 65 mm. Equipped with a 12-position turret and motorized tool spindle capable of 5000 RPM. Contact us for more information about this machine. Iajdjyalp Nepfx Ahyjl Additional equipment • Spindle Speed (Motorized Tool Spindle): 5000 rpm Machine Benefits Technical Machine Benefits • Maximum swing: 450 mm / workable diameter: 340 mm / maximum workable length: 1020 mm / bar capacity: 65 mm • Turret type: 12 ut vdi / number of tools: 12 • Spindle speed (main spindle): 3000 rpm / spindle nose: asa 8 / spindle bore: 65 mm

Condition: ready for operation (used), Year of construction: 2008, controller manufacturer: OKUMA, controller model: OSP - P300L, number of axes: 4, This 4-axis Okuma LB 3000 EX MYT was manufactured in 2008, offering advanced capabilities for horizontal turning. Ideal for complex machining tasks, this machine ensures precision and efficiency. Consider the opportunity to buy this Okuma LB 3000 EX MYT horizontal turning machine. Contact us for more information. Additional equipment • Bar Loader: Iemca Master mod. 880 33 P/R • Automatic Presetting: Yes • Gear Machining Software and Tools: Yes • Accessories: Chip Evacuator Machine Benefits Technical Machine Benefits • Max. Workable diameter: Ø 400 mm • Max. Workable length: 500 mm • Type: cnc lathe • Condition: used • State: optimal Extra Information Iedpfx Ahsyalp Asyjal Machine still under power

Condition: ready for operation (used), Year of construction: 2011, spindle speed (max.): 6,000 rpm, spindle motor power: 11,000 W, overall weight: 5,650 kg, controller manufacturer: FANUC, controller model: 31i Model A, This 3-axis NAKAMURA-TOME WT-100 was manufactured in 2011. It features a CNC FANUC 31i Model A, turning length of 503 mm, and a maximum turning diameter of 190 mm. The machine includes two motorized turrets with 12 tools each, a bar capacity of 42 mm, and a TOP AUTOMAZIONI FU 342 bar loader. If you are looking to get high-quality turning capabilities, consider the NAKAMURA-TOME WT-100 machine we have for sale. Contact us for more information. Additional equipment Iedpfjyalpvjx Ahyjal • TOP AUTOMAZIONI FU 342 bar loader Machine Benefits Technical Machine Benefits • Turning length: 503 mm • Max turning diameter: 190 mm • Bar capacity: 42 mm • Upper turret: motorized with y axis • Lower turret: motorized Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 345 mm, travel distance Z-axis: 462 mm, controller manufacturer: MAZATROL, controller model: Smooth G, number of axes: 2, This Mazak Mega Turn 500 was manufactured in 2017. A robust vertical turning machine featuring a Mazatrol Smooth G control unit, it offers a maximum workable diameter of 500 mm and includes a 12-position turret plus a 10-station ATC with Capto C6. Additional features include a high-pressure coolant system at 15 bar and an automatic tool presetter. Contact us for more information about this machine. Additional equipment • High Pressure Coolant System: 15 bar • Automatic Tool Presetter: Yes Iodoyalppepfx Ahysal Machine Benefits Technical Machine Benefits • Maximum workable diameter: 500 mm • Turret configuration: 12-position turret + 10-station atc with capto c6 Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2011, controller manufacturer: MAZATROL, controller model: Matrix, This 5-axis Mazak Integrex 100 IV ST was manufactured in 2011. It features a main spindle with a 6" hydraulic chuck, 4,000 rpm max speed, and 30 kW power. The second spindle matches these capabilities. Its milling spindle can reach up to 20,000 rpm. Includes a high-speed ATC with a 20-tool capacity, expandable to 120. Ideal for single-setup machining with its heavy-duty construction and MAZATROL MATRIX CNC control. Contact us for more information about this machine. Machine Benefits Qualitative Machine Benefits • There are 2 units available Technical Machine Benefits • Chuck type: 6" hydraulic chuck with bar capacity max /spindle speed: 4000 rpm max /power: 30 kw / 22 kw continuous/ max torque: 500 nm /spindle nose: a2-8/ acceleration time: 5. 1 seconds • Type: 6" hydraulic chuck max speed: 4000 rpm max power: 26 kw / 22 kw continuous /max torque: 724 nm /spindle nose: a2-8 /acceleration time: 2. 7 seconds • Max speed: up to 20000 rpm (optional) /max power: 18. 5 kw/ max torque: 119 nm/ taper type: km63, capto c6, bt40 • X-axis: 410 mm/ y-axis: ±70 mm (total 140 mm) /z-axis: 805 mm/ b-axis (milling head): 210° rotation/ c-axis (spindle): 0. 0001° resolution (full contouring) Iodpfx Aoyalpiehyeal • Max turning diameter: approx. ø545 mm/ max turning length: approx. 600 mm • Tool capacity: 20 tools standard, expandable to 120 /changer type: high-speed cam-driven system • Heavy-duty construction with linear guides “done in one” multi-tasking concept for single-setup machining/ cnc control: mazatrol matrix with 3d simulation/ intelligent thermal shield for automatic thermal compensation

Condition: ready for operation (used), Year of construction: 2010, controller manufacturer: MAZATROL, controller model: MATRIX, This 3-axis Mazak QTN 250 M X 1000 horizontal turning machine was manufactured in 2010. If you are looking to get high quality turning capabilities consider the Mazak QTN 250 M X 1000 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Max. Capacity: 640 • X-axis rapid traverse speed: 36000 / z-axis rapid feed speed: 36000 / c-axis rapid feed speed: 555 • Machinable diameter: 380 • Maximum machinable length: 600 • Bar capacity: 76 • Self-centring dimensions (main spindle): 250 • Stroke: 1000/cone: cm 4 Iaodpfx Ajyalpcshyol • Coolant tank: 300 l

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 4,500 rpm, controller manufacturer: MAZATROL, controller model: 640T NEXUS, number of axes: 2, This 2-axis Mazak QTN 250M 1000L was manufactured in 2004, offering reliable performance as a horizontal turning machine. If you are looking to get high-quality turning capabilities, consider the Mazak QTN 250M 1000L machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Maximum machinable diameter: 380 mm • Maximum workable length: 600 mm • Bar capacity: 76 mm • Self-centering dimensions (main spindle): 250 mm • Spindle nose (main spindle): asa 8 • Spindle hole (main spindle): 88 mm • Tail stock race: 1000 mm cone: 4 cm • Cooling tank capacity: 300 liters Extra Information Iaedpfx Ajyaln Sjhyel Machine still under power

Condition: ready for operation (used), Year of construction: 2014, controller manufacturer: FANUC, controller model: 21‑i TB, This 4-axis HYUNDAI KIA SKT 21 LMS was manufactured in 2014. It features a Fanuc 21-i TB control unit, a maximum machining diameter of Ø 254 mm, and a length of 531 mm. The spindle speed reaches up to 6,000 rpm, and it includes a 12-position tool magazine and a chip conveyor. If you are looking to get high-quality turning capabilities, consider the HYUNDAI KIA SKT 21 LMS machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Number of axes: 4 (x, z, c, b) /x axis travel: 221 mm /z axis travel: 549 mm • Max. Machining diameter: Ø 254 mm/ max. Machining length: 531 mm • Tool magazine: 12 positions Iodpfx Aheyaln Esysal • Equipment: chip conveyor /bar feeder: top automazioni mod. Magic

Condition: ready for operation (used), Year of construction: 1999, total height: 2,515 mm, overall weight: 10,000 kg, controller manufacturer: FANUC, controller model: Series 0-T, number of axes: 2, This Hyundai HiT V5R was manufactured in 1999. It features a swing of 800 mm, a maximum length capacity of 625 mm, and a chuck size of 381 mm. Equipped with a 16-station ATC, an 8-position turret, and a main motor of 30 HP, it supports up to 1,000 kg. Additional features include a Fanuc Series O-T CNC control and a turbo chip conveyor. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Main motor: 30 hp • Swing: 800 mm • Max. Length (shaft): 625 mm • Chuck size: 381 mm • Turret positions: 8 • 8-angle drum turret • Positioning accuracy: 0. 102 mm • Repeatability: 0. 051 mm • Coolant motor / hydraulic tank • Turbo chip conveyor Extra Information Machine still under power Iedjyalnxspfx Ahysal Dimensions Machine Depth 2540 mm

Condition: ready for operation (used), Year of construction: 2017, spindle speed (max.): 8,000 rpm, controller manufacturer: FANUC, controller model: na, number of axes: 9, This 9-axis Hanwha XE 26 H was manufactured in 2017, featuring a sophisticated control unit. Ideal for complex horizontal turning operations, this machine ensures precision and efficiency. If you are looking to get high-quality turning capabilities consider the Hanwha XE 26 H machine we have for sale. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Z-axis: z1 axis travel: 210 mm (with bushing) Iedpfxjyalnrs Ahyoal • Z-axis: z2 axis travel: 215 mm Extra Information Inventory number: 00191 Type: Mobile turret lathe Condition: Used Status: Excellent Axes: 9 (5 linear + 4 rotary) Sub-spindle turning diameter: Ø 26 mm Sub-spindle speed: 8,000 rpm Sub-spindle motor power: 1.5/2.2 kW Index: 0.001°

Condition: ready for operation (used), Year of construction: 2008, controller manufacturer: HEIDENHAIN, controller model: na, number of axes: 3, This 3-axis Gildemeister CTX 420 Linear was manufactured in 2008. It features a HEIDENHAIN iT CNC control, motorized tools, and both C and Y axes, enhancing its horizontal turning capabilities. Consider the opportunity to buy this Gildemeister CTX 420 Linear horizontal turning machine. Contact us for more information. Machine Benefits Iodpfoyalnlsx Ahyeal Technical Machine Benefits • Motorized tools: yes • C axis: yes • Y axis: yes Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2012, controller manufacturer: FANUC, number of axes: 2, This 2-axis DOOSAN PUMA 400LM horizontal turning machine was manufactured in 2012. Ideal for precision turning operations, it offers robust construction and reliability. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 400LM machine we have for sale. Contact us for more information. Iaodeyalnfopfx Ahyol Additional equipment • 12 motorized positions • Tail Stock Included • Bezel • Motorized

Condition: ready for operation (used), Year of construction: 2007, overall weight: 12,500 kg, This DOOSAN VT 900 was manufactured in 2007. It's a vertical turning machine featuring a CNC FANUC Oi-TC, a chuck diameter of 630 mm, and a conveyor. Weighing 12500 Kg, it also meets CE standards. Consider the opportunity to buy this DOOSAN VT 900 vertical turning machine. Contact us for more information. Machine Benefits Technical Machine Benefits Ijdpfsyalm Usx Ahyoal • Chuck diameter: 630 mm

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 4,000 rpm, This DMG MORI NLX 2500Y 700 was manufactured in 2022. A robust horizontal turning machine, ideal for precision machining. Consider the opportunity to buy this DMG MORI NLX 2500Y 700 horizontal turning machine. Contact us for more information. Machine Benefits Qualitative Machine Benefits Iajdpoyalm Iefx Ahyel • 4-color lamp • Automatic door • Robot interface • Bar feeder interface • 10 m codes • Air blower Technical Machine Benefits • Turning lenght 705 mm • Y axis • Live tooling • 12-station turret with 10000 rpm • Hinged chip conveyor • High pressure coolant • Manual presetting • Kitagawa br 10 self-centering • Asa 8” spindle with 91 bore

Condition: ready for operation (used), Year of construction: 1996, controller manufacturer: FANUC, controller model: na, number of axes: 2, This DMG Mori Seiki 150 SL was manufactured in 1996. A horizontal turning machine featuring a turning diameter of 150 mm, swing over saddle of 430 mm, and distance between centers ranging from 180 to 500 mm. It comes equipped with 12 tools. Consider the opportunity to buy this DMG Mori Seiki 150 SL horizontal turning machine. Contact us for more information. Iodpfxjyalmzs Ahyeal Machine Benefits Technical Machine Benefits • Distance between centers: 180–500 mm • Turning diameter: 150 mm • Swing over saddle: 430 mm Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2007, number of axes: 7, This 7-axis Citizen Cincom K16 VII was manufactured in 2007. It features a motorized system, an Iemca 332 loader, a high-pressure pump, and a chip evacuator, making it ideal for intricate Swiss-type turning operations. Consider the opportunity to buy this Citizen Cincom K16 VII Swiss type turning machine. Contact us for more information about this machine. Additional equipment • Iemca 332 loader • High pressure pump • Chip evacuator Machine Benefits Technical Machine Benefits • Motorized with 7 axes + 2 axes c Iedpeyalmuofx Ahyoal Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2007, spindle motor power: 26,000 W, travel distance X-axis: 100 mm, overall weight: 6,900 kg, controller manufacturer: FANUC, controller model: FANUC 18i-TB, number of axes: 8, This 8-axis Biglia B470 YSM was manufactured in 2007. A robust turn-mill centre featuring dual spindles, each with significant power (main spindle 26 kW, sub-spindle 11 kW), and a maximum spindle speed of 3200 RPM. It includes a FANUC 18i-TB control unit, two 12-position live-tool capable turrets, and a bar feeder for enhanced productivity. If you are looking to get high-quality turning capabilities consider the Biglia B470 YSM machine we have for sale. Contact us for more information. Additional equipment • Chip Conveyor: Yes (belt type) • Part Catcher + Exit Conveyor: Yes • Bar Feeder: Iemca Master 880 MP 33L (Year 2019) Machine Benefits Technical Machine Benefits • Max. Turning length: 320 mm • Max. Turning diameter: 240 mm • Max. Bar capacity: 80 mm • Turrets: 2 × 12-position, all live-tool capable • Tool size: 20×20 mm (turning), Ø32 mm (boring) • Live tool speed: 4000 rpm Iajdpfxoyalmno Ahysl • Live tool motor power: 3. 7 kw Extra Information Machine still under power