Used Jpt 310 for sale (2,275)

Condition: good (used), For sale: PWB Swiss measuring device, model TOOL MASTER 310 Very good condition, complete, ready for operation Package includes: • TMA 21 control panel • LED displays • Dial gauge • Measuring socket for holders Features: • X and Z axis measurement Dsdpfx Afjw Humlsnjkh • Tool setting and calibration for CNC tools • Easy operation • Length and diameter measurement Original user manual included Brand: PWB Swiss Model: Tool Master 310

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, REX HOMS-310-K Four-sided Planer Year of manufacture: 1980 Serial number: 18.568 Power: 91.69 kW It has not been used since 2021. The machine was stored in a closed production hall for the entire period and is fully functional. After purchasing the machine, the electrical cables were replaced with new ones. We rate the technical condition as very good - visually there are visible traces of use, but technically everything works properly. The reason for the sale is the end of glued wood production. Maximum working width: 305 mm Minimum working width: 50 mm Maximum workpiece height on 2 sides: 310 mm Maximum workpiece height on 4 sides: 160 mm Minimum workpiece height: 17 mm Dkedowfqh Ajpfx Afnjh driven upper and lower feed rollers

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 0-200-03-8334, feed rate X-axis: 24 m/min, workpiece height (max.): 60 mm, controller model: Power Control Pc 22, TECHNICAL DETAILS Panel height: 60 mm Solid wood: 20 mm PVC / ABS: 3 mm Feed speed: 24 m/min Dsdpfxeydiymo Afnjkh MACHINE DETAILS Control system: Power Control PC 22 Supply voltage: 480 V Frequency: 60 Hz Phases: 3~ + N Operating current: 51 A Fusing: 63 A Phase circuit: 3~ Control voltage: 24 V EQUIPMENT Electronically adjustable working height via CNC Powered, rubberized conveyor belt with increased pressure Panel support guide Lateral roller conveyor with idler rollers for panel support Sanding unit Infrared lamps for panel edge preheating Six-position coil holder magazine with automatic edge change via CNC EVA hot-melt gluing unit with premelter and glue pot Edge pressing unit for straight profiles with electronically adjustable pressure rollers via CNC End trimming unit with two motors and automatic tilt adjustment Overlapping cut-off / milling unit with two motors Glue / milling unit with two tiltable motors, electronically adjustable via CNC Multifunctional 4-motor corner rounding unit (smoothing + rounding) with CNC control, automatic adaptation Provision for integrating an additional working station Edge scraping unit Oscillating brush unit

Condition: not inspected (used), Year of construction: 2008, operating hours: 33,000 h, functionality: unexamined, feed rate X-axis: 25 m/min, workpiece height (max.): 60 mm, working height: 950 mm, controller model: Power Control PC22, TECHNICAL DETAILS Feed rate: 18 - 25 m/min Working height: 950 mm Minimum working width at workpiece thickness of 22 mm: 55 mm Minimum working width at workpiece thickness of 60 mm: 100 mm Workpiece overhang: 30 mm Workpiece thickness: 8 (12) - 60 mm Edging material, strip max.: 0.4 - 20 mm Edge cross-section, strip max.: 900 mm² Edging material, coil: 0.3 - 3 mm Max. edge cross-section for PVC: 135 mm² Max. edge cross-section for veneer: 100 mm² Max. roll diameter: 830 mm MACHINE DETAILS Dksdpoyc Sr Aofx Afneh Control system: Power Control PC22 Pneumatic connection: 7 - 8 bar Operating hours: approx. 33,000 h EQUIPMENT Continuous machine frame for mounting processing units Workpiece support with roller rail, extendable approx. 800 mm Glue roller drive on feed stop Glue pot lift-off at feed stop Glue pot clamping, workpiece actuated Infeed fence automatically adjustable Infeed lock pneumatically controlled Infeed device with 2 rollers Infeed extension 500 mm Automatic pressure zone adjustment Sliding carriage Pre-installed for Boomerang ZHR05 return system Workpiece support in extended scissor design Operating data collection Electric height adjustment Fixed stop on left side Workpiece transport system Top pressure Separating agent spray unit Jointing cutter unit, 2 x 3 kW Gluing station A20 Basic for coil material up to 3 mm and strip material up to 20 mm, with melting unit with granulate tank and quick-change system Cross-cutting unit, 2 x 0.8 kW, with pneumatic adjustment Slip agent spray unit Pre-milling unit 1.5 kW, pneumatically adjustable Profile trimming unit FK13, 2 x 0.4 kW Universal milling unit 4 kW, controlled, with stepless axis Multi-finishing unit MN21 automatic Finishing unit FA11, with finishing station, cleaning agent application, and buffing unit, pneumatically adjustable Noise protection Spare position for additional processing units Note: The machine is sold without consumable tools. Container loading and seaworthy packaging by the seller is not possible.

Condition: used, machine/vehicle number: 008321, X axis working area: 4200 mm Y axis working area: 1350 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Dkedpfxex A Tdlj Afneh Maximum edge height: 60 mm Total number of drilling spindles: 18 Total number of tool changer positions: 22

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: B8820, actuation type: hydraulic, working width: 3,100 mm, sheet thickness (max.): 8 mm, power: 15 kW (20.39 HP), overall weight: 9,800 kg, TECHNICAL DETAILS Sheet thickness max.: 8 mm Working width max.: 3,100 mm Back gauge depth: 1,000 mm Dkedpfx Afeyh Nl Ienjh MACHINE DETAILS Control: CNC Power: 15.0 kW Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,200 x 2,100 mm Weight: 9,800 kg Transport packages: 1 EQUIPMENT Electric backgauge Pneumatic sheet support system Fixed finger guard Motorized angle adjustment Motorized cutting gap adjustment Ball bearing table Documentation CE marking

Condition: used, Year of construction: 2007, total length: 3,600 mm, total height: 1,200 mm, total width: 1,480 mm, - Machine available from: 2025-12-15 - Year: 2007 Dkedpfx Aex Ei Syofneh - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes - └ 7th unit type: Flat scraping unit - - Tools available: Yes - └ 8th unit type: Brushing unit - Voltage [V]: 400 - Current consumption [A]: 50 - Transport dimensions: 3600mm x 1480mm x 1200mm (l x w x h) - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, mileage: 32 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,100 kg, first registration: 01/2026, emission class: euro6, color: white, number of seats: 9, total width: 2,474 mm, total height: 2,526 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Subject to errors and prior sale! Internal number: 83426----LOCATION: 04758 Oschatz, Filderstädter Straße 10 Tel. no. for inquiries: Mr. Enrico Schieler: 03435 ? 90 90 22 or ---- OPTIONAL EQUIPMENT * Air conditioning front and rear - incl. water heating rear - incl. dust and pollen filter * Seats in the passenger compartment: seat backrests with adjustable inclination * Seat package 15: Driver's seat adjustable in 4 ways - Double passenger seat with storage compartment under individually foldable seat cushions - Headrests height adjustable - Tray integrated in the double passenger seat (foldable) - Seat heating for driver - Seat heating for passenger - Inside armrest for driver - Manual lumbar support (driver's seat) - Seat cover: fabric * Technology package 10: Heated windscreen - Windscreen wipers with rain sensor - Parking pilot system front and rear - Emergency brake assistant, active (camera-based) - Lane assistant with fatigue warning and high beam assistant, additionally with lane keeping assistant - Headlight assistant with day/night sensor - Cruise control - Rear view camera with image transmission of the rear path in the multifunction display - LED downlight - fog lights - Ford audio system. with 4 inch multifunction display OTHER EQUIPMENT Dedpfx Afjyhz Arsnekh * 1 battery * Airbag on driver and passenger side * ABS with electronic brake force distribution - ESP with traction control - Hill start assist - Crosswind assist - Safety brake assist - Rollover protection - Emergency brake support including emergency brake light * Electrically adjustable and heated exterior mirrors - with integrated indicators * Battery: battery life, battery life programmed to 10 minutes * Rubberized floor (in driver's cab and passenger compartment) * On-board computer with consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECO mode * Complete roof liner * Double-wing rear door with 180° opening angle (with window) - with heated rear windows, rear window wiper including window washer nozzle and automatic activation when reverse gear is engaged * Passenger compartment lighting with delay circuit * Window, 2nd row: side windows fixed, right * Front window lifter electric * Ford Easy Fuel - comfort tank cap and misfuelling protection * Generator, high-performance version * Glove compartment with lid, lockable * Interior lighting with delay circuit with reading lights at the front * Fuel tank 70 l * Steering wheel: leatherette steering wheel * Steering column, adjustable in height and reach * MyKey key system - individually programmable second key * Emergency call assistant * Package: Technology package 9 - heated windscreen - windscreen wipers with rain sensor - parking pilot system front and rear - emergency brake assistant, active (camera-based) - lane assistant with fatigue warning and high beam assistant, additionally with lane keeping assistant - headlight assistant with day/night sensor - cruise control - fog lights - Ford audio system 4 inch multifunction display * Particle filter: diesel particle filter * Wheels: hubcaps * Wheels: tire repair kit * Wheels: steel wheels 6.5 J x 15 with 215/65 R 15 tires * Headlight dipped beam halogen headlights with daytime running lights * Sliding door, right * Mud flaps, rear * Side protection strips * Low side paneling * Power steering * Seat belts - Seat belt tensioners and belt force limiters at the front - Warning system

Condition: good (used), functionality: fully functional, Year of construction: 2000, Used Safan guillotine shear Type HT 310-6 TS Dksdsyglr Repfx Afneh Capacity: 3100 x 6 mm Electrically adjustable backgauge, blade gap and cutting angle adjustment Equipped with pneumatic rear support table

Condition: used, machine/vehicle number: 008395, X axis working area: 3050 mm Y axis working area: 1250 mm Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Total number of drilling spindles: 27 Dksdpjygtcqofx Afnjh Total number of tool changer positions: 8

Condition: used, machine/vehicle number: 007227, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAL 310 + ZHR 05 Dodpfjwuuc Aex Afnekh Position 2: Panel Return Systems HOMAG + LIGMATECH-KAL 310 + ZHR 05

Condition: used, Year of construction: 1981, total length: 3,750 mm, total width: 2,250 mm, total height: 1,700 mm, Weight: 5.500 kg - Year: 1981 - Documentation available: No - CE certificate present: No - Serial number: B5896 - Drive system: Conventional - Drive type: Hydraulic - Power [kW]: 11.0 - Max. sheet thickness [mm]: 6 Dkodpfx Aoyf Hhwofnjh - Max. working width [mm]: 3100 - Backgauge type: Electric - Backgauge depth [mm]: 1100 - Sheet support system: None - Finger guard: Fixed - Angle adjustment: Manual - Blade gap adjustment: Manual - Table type: Standard table - Transport dimensions: 3750mm x 2250mm x 1700mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, machine/vehicle number: 008246, Position 1: Single Edgebanders HOMAG-KAL 310 + ZHR 05 Djdpsx A Hi Isfx Afnokh Position 2: Panel Return Systems HOMAG-KAL 310 + ZHR 05

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: well-maintained, serviced regularly (last service by Homag in 11/2024) Features and technical specifications: Minimum workpiece thickness: 12 mm Maximum workpiece thickness: 60 mm Minimum workpiece size (L×W): 240 × 55 mm (with 22 mm thickness) / 100 mm (with 60 mm thickness) Minimum edge thickness: 0.3 mm (roll material) / 0.4 mm (strip material) Maximum edge thickness: 3 mm (roll material) / 20 mm (strip material) Feed speed: infinitely variable, 18–25 m/min (frequency-controlled) Type of glue: EVA hot-melt adhesive Glue application (pot / cartridge / nozzle): melting unit with granulate hopper Glue volume / cartridge size: granulate hopper, melting capacity 18–35 kg/h, level-controlled Dksdswx Aaqopfx Afneh Heat-up time: approx. 8–10 min Edge magazine (slots): 2 rolls (automatic roll change) Automatic edge change: yes (automatic via PC22, can be switched manually) Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable Pressure zone: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment End trimming: HL84 trimming unit, 2 × 0.8 kW, pneumatically adjustable (bevel / straight) Flush milling: via pre-milling unit, pneumatically adjustable Radius milling: FK13 contour routing unit, automatic 8-position tool changer (R = 2 mm) Bevel/profile milling: yes, via FK13, pneumatically adjustable Scraper: integrated in multi-finishing unit MN21 Polishing: buffing unit in finishing module FA11 Jointing unit: jointing milling unit KAL310/A20/S2, 2 × 3 kW Workpiece pre-heating: available Release agent spraying device: top / bottom, type 2929 (F.01) Extraction ports: multiple Ø 100 mm (individual extraction per unit) Control: power control PC22 (industrial PC, woodCommander on Win XP embedded) Operating voltage: 400 V, 50 / 60 Hz CE / Standards: CE-compliant according to EU Directive 98/37/EC Dimensions / required space: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg The return conveyor system visible in the pictures is not included in the scope of supply! Availability: short-term Location: 63934 Röllbach

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 7363-0044, Plastic injection moulding machine | Sumitomo SHI DEMAG - Systec 100/420-310 (1000-310) Clamping force [kN]: 1,000 Number of injection units: 1 Clamping platen width [mm]: 600 Clamping platen height [mm]: 600 Tie bar spacing horizontal [mm]: 420 Tie bar spacing vertical [mm]: 420 Dkodpfoygiafex Afneh Locating ring diameter [mm]: 125 Minimum mould height [mm]: 250 Maximum mould height [mm]: 500 Maximum daylight [mm]: 500 Maximum ejector stroke [mm]: 150 Thread [M]: 16 Maximum mould weight [kg]: 780 Maximum mould weight, movable side [kg]: 500 Screw diameter [mm]: EE1: 35 Maximum shot weight [g] PS: EE1: 149 Aggregate configuration: EE1: horizontal Equipment: 1 core pull, stacking station, with robot Inspection possible at any time by arrangement. Free loaded onto truck (Butzbach). #Tags: Sumitomodemag | Systec400 | 100-420-310

Condition: good (used), Set of 2 Leitz Heliplan Spiral Cutterheads bottom/top Dksdpfx Afjydk Swsnsh 125 x 310 x 40 with pre-drilling, aluminum on Powerlock adapter 8000 rpm max Can also be used without Powerlock on a 40 mm spindle

Condition: good (used), mileage: 171,789 km, power: 234 kW (318.15 HP), first registration: 01/2016, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 8, emission class: euro6, suspension: steel-air, total length: 6,950 mm, total width: 2,550 mm, total height: 3,050 mm, loading space length: 4,670 mm, loading space width: 2,370 mm, loading space height: 700 mm, Year of construction: 2016, Equipment: ABS, cruise control, electric window regulation, power mirror, traction control, trailer coupling, = Additional Options and Equipment = Dodpfx Ajydid Sefnskh - Digital tachograph - Tachograph (control device) - Fixed fifth wheel - Short cab - PTO (power take-off) - Pump = Notes = Number of axles: 2, Configuration: 4x2, Kerb weight: 8,141 kg, Gross vehicle weight: 19,000 kg, Total tank capacity: 200 liters, Trailer coupling, King pin diameter: 50 DIN, Fifth wheel: Fixed, Number of differential locks: 1, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Tachograph (control device), Digital tachograph, Electric windows, Electric mirrors, Radio/Cassette, Color: White, Heated mirrors, Reversing camera, Lighting type: Halogen lamp, Lane departure warning system, Heated seats, Flashing lights, Engine output: 234 kW (314 Hp), Fuel: Diesel, Euro 6, Transmission type: Manual, Gearbox: ZF, Gears: 8, Clutch pedal, Power steering, ABS, ASR, PTO (power take-off), PTO type: 1, Starter battery, Number of sides: 1 side, Pump, Seat arrangement: 1+2, Seat upholstery: Seat covers, Seat adjustment: Manual, 19 ton tipper. = Further Information = Transmission Gearbox: ZF, 8 gears, manual transmission Axle configuration Tyre size: 315/80R22.5 Brakes: Disc brakes Axle 1: Steered; Tyre tread left: 11 mm; Tyre tread right: 11 mm; Suspension: Leaf spring Axle 2: Twin wheels; Tyre tread left inner: 15 mm; Tyre tread left outer: 15 mm; Tyre tread right inner: 15 mm; Tyre tread right outer: 15 mm; Suspension: Air suspension Weights Unladen weight: 8,141 kg Payload: 10,859 kg Gross weight: 19,000 kg Functionality Platform height: 208 cm Pump: Yes Condition Technical condition: good Optical condition: good Damages: none Number of keys: 1 Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our inventory covers all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing stock • Recognisable quality • Good pricing • Trustworthy business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates arranged quickly • Expert technical services • The security of ‘recognisable quality’ • And more.... Please visit our website for special offers and the full inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit a request via our website. Ask us directly about our European warranty packages.

Condition: ready for operation (used), Year of construction: 1990, operating hours: 4,452 h, functionality: fully functional, cutting height (max.): 120 mm, main saw diameter: 380 mm, cutting depth: 340 mm, Raimann KR 310 E 340/120 multi-saw with movable disc - manufactured in Germany - year of manufacture 1990 - DTR - number of hours 4452 h TECHNICAL PARAMETERS: - track width 340 mm - cutting height max 120 mm - cutting height with movable disc 85 mm - engine power 30 kW - minimum length of the element 700 mm - width of table 740 mm - feed regulated on inverter 6-48 m/min - three rows of pawls - possibility to mount a bush - sleeve diameter 80 mm - length of fixed sleeve 190 mm - electrical adjustment of cutting height - electrical adjustment of shaft height Dsdperhig Ejfx Afnskh - four top pressure rollers - automatic central lubrication - laser - ruler - spigot diameter 250 mm Overall dimensions of the machine 250x200x220 cm weight 2000 kg

Condition: excellent (used), Raimann KS 310 BV edger multisaw - year of manufacture 1995 - German production - DTR - two movable discs TECHNICAL PARAMETERS: - track width 340 mm - cutting height max 120 mm - engine power 30 kW - disc diameters 250/360 mm - Possibility to put on a shoe - electric height adjustment - feed continuously adjustable 11-38 m / min - power of the feed motor 1.5 kW - two movable discs - three lasers Dedjir Eubjpfx Afnokh - max element width 1000 mm - minimum element length 600 mm with a shoe 400 mm - four upper pressure rollers - spindle diameter 65 mm - sleeve diameter 80 mm - spigot diameter 250 mm Dimensions 230x220x230 weight 2500 kg

Condition: used, machine/vehicle number: 19138, Zusammentragmaschine / Collating Machine PLOCKMATIC 310Baujahr / Year 1998 - Serial-No. 310034919 10 Staionen Zusammentragmaschine / 10 Stations Collating Machine Mit einem angebundenen Rüttler zig/zag / Delivery Jogger with an online zig/zag unit Panel Operation and Controls, Dkodpfxoh Axwzs Afnsh Stau / Jamming Doppelbogen- und Fehlbogenkontrolle / double-sheet and no-sheet control Pre-set counter - Full receiving Tray Handnbücher / ManualsElektrischer Anschlusswert / Electrics 230 V - 2 ph Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Multirip saw Max. Cutting width 310 mm Chain width 340 mm Max. Passage width / input width 650 mm Max. Cutting height with Quickfix clamping flange 110 mm Saw shaft diameter 65 mm Min. timber length 500 mm Max. Feed speed 35 m/min, variable Motor power 22.0 kW, 400 V, 50 Hz Feed motor 1.3 kW, 400 V, 50 Hz Saw blade diameter min./max. 300/ 350 mm Working height 850 mm Extraction diameter 250 mm Required extraction volume 5300 m3/h Quickfix saw blade attachment Electric height adjustment of the saw shaft Electric height adjustment of the pressure unit Dimensions approx. L x W x H = 1750 x 1750 x 1500 mm Weight 1850 kg Incl options: Oil level monitoring SafetyPlus Quickfix Note for used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! Djdpfx Aotwy Iusfnjkh - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, mileage: 384,315 km, power: 228 kW (309.99 HP), first registration: 07/2004, fuel type: diesel, axle configuration: 6x2, wheelbase: 5,250 mm, fuel: diesel, brakes: engine braking, color: red, driver cabin: day cab, gearing type: mechanical, number of gears: 8, emission class: euro3, suspension: steel-air, total length: 8,400 mm, total width: 2,550 mm, loading space length: 6,050 mm, loading space width: 2,400 mm, loading space height: 2,350 mm, Year of construction: 2004, Equipment: ABS, EBS, air conditioning, cruise control, electric window regulation, fog lights, power mirror, tail-lift, traction control, trailer coupling, = Additional options and accessories = - Heated exterior mirrors - High beam - Speed limiter - Beacons - Air suspension - Radio/CD player - Side door - Sun visor - Toolbox - Towing eye = Further information = Technical information Number of cylinders: 6 Engine displacement: 11,967 cc Axle configuration Brakes: Disc brakes Front axle: Max. axle load: 9,000 kg; Suspension: leaf springs Rear axle 1: Twin tires; Max. axle load: 11,500 kg; Suspension: air suspension Rear axle 2: Lift axle; Max. axle load: 7,500 kg; Steered; Suspension: air suspension Dksdpfx Afoyh Iu Ujnoh Weights Curb weight: 11,155 kg Payload: 16,845 kg Gross vehicle weight: 28,000 kg Functional Tail lift: B.A.R, tailgate, 1,500 kg Identification Registration: BP-NL-05

Condition: excellent (used), Year of construction: 2011, operating hours: 26,882 h, functionality: fully functional, Exeron S 310 MF year of manufacture: 2011 generator hours: 26,882 Do Utjv Nkrdeyfqhekh control: exowin 20 x, y, z 310 x 270 x 270 mm C-axis 3R spindle interface Erowa chuck on bed with magnetic plate generator 64 A C-box for hard metal and PKD Djdeyh Ei Nopfx Afnekh 20-fold tool changer fire extinguishing system chiller Erowa aluminum clamping plate documentation machine is connected for inspection

Condition: excellent (used), Year of construction: 2015, Equipment: documentation/manual, Clamping force: 100 t Dkodpfx Aoyg Eu Sofnjh Opening max: 500 mm Mould heigh: 250 mm Platen size: 590x600mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm3 Injection pressure: 2755 extra equipment: 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Condition: good (used), functionality: fully functional, Offered is a Kobe K-310 bone saw in good condition. The machine is fully functional and the bearing on the upper wheel has been replaced. New saw blade installed. Dkedpfxsyh H Rbe Afneh Saw table dimensions: width 57 cm, depth 78 cm Max. cutting height approx. 35 cm Immediately ready for use, see photos. Further details on request. Payment in cash or in advance. Sale to commercial customers only, no warranty or liability.