Used Injection Mold Article for sale (3,298)

Condition: like new (used), Year of construction: 2021, operating hours: 200 h, functionality: unexamined, machine/vehicle number: S/ NOS : 248534, 248535, 248536, clamping force: 3,800 kN, screw diameter: 60 mm, displacement volume: 877 cm³, injection weight: 300 g, ejector stroke: 210 mm, plate length: 1,140 mm, plate width: 1,140 mm, overall weight: 20,400 kg, type of input current: three-phase, input frequency: 60 Hz, input voltage: 480 V, year of last overhaul: 2024, number of digital displays: 1, Equipment: CE marking, documentation/manual, unit sold as is where is Two colors injection molding machine (two shots) Three machines available , price is per machine Manf. : Engel Austria Model : e-Motion 740H / 50MV / 420 T Combi US S/ NOS : 248534, 248535, 248536 Year Built : 12/2021 Condition : very good Material : THERMOPLAST Clamping Force : 420 Ton Injection Unit 1 : 740/. H-arrangement Injection Unit 2 : 50/. MV-arrangement Machine Net W : 20 400 Kg Gross Dim of crate : 23’ x 8’ 10” x 9’ 7” (H) Capacity : 427 Ton Shot Size : 10.2 oz Second Shot Size : 0.45 oz Tie Bar Spacing : 30.7" x 30.7" Platen Size : 44.89" x 44.89" Cgjdpfjx Szwhex Aftjp Min /Max Mold Height : 45.3"/61" Clamp Stroke : 27.55" Ejector Stroke : 8.26" Control : CC300 Voltage : 480 Min/Max Mold Height : 43.3" - 61.02" 2-Shot Injection Molding Press Main Injection Unit: 10.2 oz (45mm) Secondary Vertical Injection Unit: .45 oz. (18mm) Core Pull Pneumatic Valve Gate Including: Engel Viper Robot

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, clamping force: 550 kN, total length: 4,220 mm, total width: 1,105 mm, total height: 2,040 mm, Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 55A injection moulding machine, fitted with the Procan CT Controller. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. *The video shown in this listing is of a previously refurbished BOY 55A which is very similar to the BOY 55A machine we are currently refurbishing. Please contact the team if you would like to see the machine in person. Cgjdpeypcltefx Aftsp

Condition: ready for operation (used), Extruder + electric cabinet Csdpfxox Dd Hms Aftjgp output: 200 kg Heads not included Winder not included

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection weight: 183 g, Here, as a dealer for injection moulding machines, we are offering the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-kept injection moulding machines manufactured from 2010 onwards. We have been wholesalers for injection moulding machines for over 25 years. Manufacturer: KraussMaffei Model: KM EX 80-380 (fully electric) Serial number: 61013142 Year of manufacture: 2009 Operating hours: 35,808 h Control system: MC 5 Fully functional Condition: very well maintained Machine comes from a single German owner xxxxx without robot / without temperature control unit xxxxx Extras: - Pneumatic shut-off nozzle - Pneumatic valve 1 at BWAP - Pneumatic control for hot runner/cold runner - Reject sorting chute - Nozzle protection door – ejector area safety door can be folded up - Euromap interface 18 on FWAP - Electric ejector plate in BWAP - Hydraulic auxiliary unit for hydraulic core pulls - Injection-compression moulding circuit - 2 x hydraulic core pull - 8-circuit water manifold - 8 heating zone controllers for hot runner - Extrusion injection circuit with position control - 3 x 230V sockets: 2 x CEE 16A / 1 x CEE 32A - Signal interface EUROMAP 67 for robot - Start-up circuit, QA package, cycle time analysis, cycle memory, event log - BluePOWER package - Graphic analysis package, trend chart - Interface for temperature control unit Main language: German Injection unit: Screw diameter: 40 mm Shot weight: 183 g/PS Injection pressure: 1,860 bar Shot volume: 201 cm³ Clamping unit: Clamping force: 80 tons / 800 kN Tie bar spacing: 420 x 420 mm Platen size: 655 x 670 mm Mould height: 250 mm Max. platen distance: 750 mm Ejector stroke / force: 150 mm / 125 kN Cgsdoyrd U Ujpfx Aftop Clamping unit fully electric Warranty: Guarantee valid up to first commissioning Loading/Shipping: Free loading onto buyer's truck or free delivery within Germany (shipping charges apply) Available from our warehouse in Hannover, Germany.

Condition: used, Year of construction: 2016, machine/vehicle number: 61024744, clamping force: 800 kN, This KraussMaffei injection molding machine 80-180 XC from 2014, including a Yaskawa MH 24 robot and feeding system, will be auctioned in our industrial auction "Injection Molding Machines - DEMAG System, KraussMaffei, Sumitomo" in Babenhausen until 10/03. The auction takes place on our RESTLOS online platform. Further machine details: KraussMaffei Cgodpfoyn Aqtjx Aftep - Year of manufacture: 2016 including Yaskawa MH 24 robot including feeding system This lot consists of 2 machines. The entire peripheral equipment shown is included in the lot. As pictured, functionality untested. Other potentially pictured items are not included. Completeness not verified.

Condition: used, Year of construction: 2014, clamping force: 6,500 kN, Demag System 200/500 This Sumitomo Demag injection moulding machine Systec 650/1020-2300 from 2014 is being auctioned, including the conveyor technology and a hot stamping unit, during our industrial auction "Injection Moulding Machines - DEMAG System, KraussMaffei, Sumitomo" in Babenhausen until 10.03. The auction is taking place on our RESTLOS online platform. Viewing by appointment is possible on Monday, 09.03.2026 from 10:00 to 11:00. Further details about the machine: Cgedpfoyn Acpsx Aftsp Sumitomo including handling and conveyor belt - Year of manufacture: 2014

Year of construction: 2021, condition: used, machine/vehicle number: 202112108066695, Max. clamping force: 10,800 kN, tie bar spacing: 1,260x1,100 mm, min./max. mold installation height: 500/1,200 mm, ejector force: 230 kN, max. opening stroke: 2,400 mm, mold opening travel: 1,900/1,200 mm, screw diameter: 110 mm, max. motor output: 112 kW, machine weight: approx. 48,000 kg, recorded operating hours: 19,413, recorded load hours: 7,526, equipped with KEBA i2985 control, Sepro Strong 50TE handling system, transport conveyor from MB type PALL year 2022 approx. 700x120 cm, partial mesh enclosure (WITHOUT: PIOVAN dosing unit, WITHOUT temperature control units) Cedpfxeyn Nh Ej Aftsgp

Condition: used, Year of construction: 2005, Injection Moulding Machine Manufacturer: Krauss Maffei Model: KM350 /1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Mould opening force: 220 kN Moving platen drive force: - Opening: 105 kN - Closing: 95 kN Mounting platen (W x H): 1,060 x 1,095 mm Clear distance (W x H): 710 x 710 mm Mould opening stroke: 920 mm Cedpoxu Uvajfx Aftjgp Minimum mould installation height: 380 mm Maximum daylight: 1,300 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Temperature control zones for barrel heating: 6 Dry cycle time: 1,550 1/h Oil capacity: 720 litres Dimensions and weights: Net weight with control cabinet: approx. 16.0 t L/W/H: 6,510 x 2,040 x 2,380 mm Maximum mould weight: 4,780 kg Injection unit: Rated shot volume: 1,900 Screw diameter: 70 mm Injection pressure: 1,778 bar Stroke volume: 1,047 cm³ Shot weight for PS: 953 g Injection rate: 527 cm³/s Screw speed standard/option: 285/349 rpm Screw drive output (standard/Stage 1): 95 PS Screw drive output (option/Stage 2): 117 PS Nozzle contact force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated control panel with TFT color display and 3.5-inch floppy disk drive for data backup Plasticising: 1 complete thermoplastic plasticising unit in wear-resistant version, screw diameter 70 mm with o non-return valve and open nozzle Nozzle radius: 15.00 mm Nozzle bore: 6.00 mm

Condition: used, Year of construction: 2005, Technical details: screw size: 70 mm injection shot weight in Polysterol: 687 g/PS Cedpfx Afewftr Dstjgp closing pressure: 3000 kN weight of the machine ca.: 19,4 t PreHeating unit and airsoaking unit is not in package !! *

Condition: defective spare-parts repository (used), Year of construction: 1998, Used ARBURG 320 C 500 injection molding machine for sale. The equipment is not working, incomplete, being sold for parts! Cgsdpfxeyrd D No Aftsp

Condition: repair required (used), Year of construction: 1999, The machine is currently not operational, the control cabinet is incomplete! Cjdpfx Afeyrdzuetjgp

Condition: used, Year of construction: 2007, Technical details: Cgsdpfxjymfk Hs Aftop closing pressure: 3500 kN weight of the machine ca.: 17 t

Condition: excellent (used), Year of construction: 2007, operating hours: 53,000 h, functionality: fully functional, machine/vehicle number: 206432, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, ejector stroke: 225 mm, overall weight: 7,450 kg, Equipment: documentation/manual, Here we, as a dealer in injection moulding machines, are offering the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Current note – Tax notice and advantage for used machines: As of 01.07.2025, used machines will also be eligible for a special depreciation of 30% annually for tax purposes. Manufacturer: Arburg Model: 520C 2000-800 GE Serial number: 206432 Year of manufacture: 2007 Operating hours: approx. 53,000 Control system: Selogica Dimensions (L/W/H): 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Functional condition: Fully operational Condition: Very well-maintained – German origin Extras: - Thermoplastic cylinder complete, 50 mm, highly wear-resistant - Screw in HC version instead of standard - Selogica direct control - Hydraulic system with 2 variable-displacement pumps - Anniversary model GOLDEN EDITION - Thermoplastic processing - Open nozzle 50 mm - Nozzle tip 50 mm extended - Heating band for open nozzle - Heating band for extended nozzle tip - Central clamping platen set 570, center Ø 125 mm - 2-piece air blast device with pressure regulator - Air blast device connection 1 - Selector unit connection - Core puller 1 for serial motion holding pressure via check valve - Conveyor belt connection via 5-pin socket - Robot interface (per EUROMAP 67), 50-pin - ARBURG host computer interface - Additional socket distributor: 1x CEE, 1x Schuko - Serial printer interface USB - CompactFlash interface for data set storage - Operation authorization with chip card per EUROMAP 65 - 1 additional heating control circuit for nozzle or adapter with socket - Dosing unit interface - Free cooling circuits, manually adjustable - Machine-specific cooling circuits controlled - Extended monitoring package - Extended motion package - Production control package - Optimization / operator assistance package - Quality assurance package - Documentation package Complete documentation included. Injection unit: Screw diameter: 50 mm Shot weight: 359 g/PS Injection pressure: 2000 bar Shot volume: 392 cm³ Clamping unit: Clamping force: 200 t / 2000 kN Tie bar spacing: 570 x 570 mm Mounting plates: 795 x 795 mm Mould installation height: 300 mm Max. platen distance: 950 mm Opening stroke: 650 mm Ejector stroke / force: 225 mm / 66 kN Clamping unit: hydraulic Cgsdpfew Tt R Iex Aftjp Motor power: 22 kW Heating power: 19.9 kW / 8 heating zones Total connected load: 45 kW The machine is available for immediate delivery at our warehouse in Hannover, Germany and has been tested. Warranty: Warranty until initial commissioning. Loading/shipping: Free loading onto the buyer's truck or free delivery within Germany (freight charge applies) Available from our warehouse in Hannover, Germany. For your information regarding our machines and company: - We sell only our own machines purchased from ongoing production at our Hannover warehouse. - All listed machines are inspected and tested prior to removal. - We do NOT sell insolvency assets – we are NOT brokers handling third party property. - All offered machines come from successful businesses where proper maintenance is standard practice. - All machines offered are available for viewing at our warehouse.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 203129, clamping force: 400 kN, screw diameter: 18 mm, displacement volume: 23 cm³, Here we offer, as a dealer specializing in injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesale supplier of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 270C 400-70 Control unit: Selogica Year of manufacture: 2007 Operating hours: 89,470 h Screw and cylinder replaced Machine number: 203129 Extras: - Robot interface - Highly wear-resistant screw - CF drive Cjdpfx Asx Rvcijftjgp - Complete documentation and software (on CF card) - Diverter valve The machine has retrofitted interfaces for: - Mold temperature - Heating channel - Coloration/dosing Control via Siemens Logo PLC Language: German - From first owner - Origin: Germany Regular maintenance by the manufacturer and previous owner Clamping unit: Clamping force: 400 kN / 40 t Tie bar distance: 270 x 270 mm Mounting platens: 446 x 446 mm Opening stroke: 350 mm Mold height: min. 200 mm Max. daylight between platens: 550 mm Ejector stroke: 125 mm Ejector force: max. 30 kN Injection unit: Screw diameter: 18 mm Injection volume: 23 ccm Shot weight: 21 g Injection pressure: 2,500 bar Electrical equipment: Pump: 11 kW Heater: 4 zones, 4 kW Total installed power: 15 kW Pre-fuse: 50A Weight: 2,150 kg Warranty: Warranty valid until first commissioning Loading/Shipping: Free loading onto buyer’s truck or free delivery within Germany against reimbursement of freight costs Available from our warehouse in Hannover, Germany Company and machine information: - We only sell machines purchased from active production for our own inventory, from our warehouse in Hanover - All offered machines are checked and tested before dismantling - We do NOT sell insolvency assets – we are NOT brokers selling third-party property. - All machines offered come from successful companies for whom servicing and maintenance are a matter of course - All machines offered can be inspected at our warehouse

Condition: good (used), Year of construction: 1996, operating hours: 32,750 h, functionality: fully functional, machine/vehicle number: 266568, clamping force: 750 kN, screw diameter: 3,025 mm, displacement volume: 8,549 cm³, full functional 2-colour /2 component injection molding machine K75-S 2F in L-Format Year 1996 Internationale Size 750H 200/100 L working hours: 32750 h controller: IQT 6 (german Text) clamping unit (extende tie bars +200mm) clamping force: 750 kN/ 75 tons distanc. tie bars: 420 x 420 mm platens dist. max: 850 mm (max) tool height: 400 mm (min) platens size: 605 x 605 mm ejector force: 34 kN ejector stroke: 150 mm centering: 125 mm (nozzle/ejtector plate) injection units +++1. Aggregat+++ horizontal injection unitt (intern. size 200) screw diameter: 30 mm shot volume: 85 ccm injection pressure 2350 bar 4 x heating zones +++2.Aggregat+++ vertical injection unit (intern. Size. 100) screw diameter 25 mm shot volume: 49 ccm injection pressure 2022 bar 3 x heating units Extras accumulator Cgodpfx Afjcud Nhjtep core pull water battery hopper Dimensions /Elektric Motor 30 KW Heating 11,7 KW weight: 5100 kg dimensions: 4,5 x 1,5 x 2,5 (LxBxT) Painting: RAL 7016, 7035, 1012 available available now at our storage Hannover/Germany all our offered machines are in our own property

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 199107, Here we offer a maintained injection molding machine. Manufacturer: Arburg Type: 720S 3200-2100 Control unit: Selogica Year of manufacture: 2005 Special feature/Condition Pump was changed new hydraulic motor in 2019 injection unit sealed in 2019 constant maintenance by the manufacturer and previous owner Extras 2 x core pull robot interface machine data sheet is available on request - complete documentation and software available - German language - from first owner - origin Germany clamping unit clamping force: 3200 kN /320 to. tie bar distance: 720 x 720 mm platen size h: 1040 mm x 1040 mm Installation height min.: 300 mm Installation height max.: 700 mm platen distance max.: 1400 mm opening stroke: 700 mm ejector stroke: 250 mm Ejector force: 100 kN centering moving platen D: 165 mm centering fixed platen D: 165 mm mold weight: 3600 kg Injection unit screw diameter: 70 mm injection weight in polysterol: 984 g/PS available immediately from our warehouse in Hanover/German or free domicile against freight reimbursement Csdpfslc R Rxjx Aftjgp the machine is offered functionally tested the machine is in our sole ownership the requested machine is available immediately in our warehouse Hannover and is offered functionally tested and can be inspected under power.

Condition: like new (used), Year of construction: 2008, operating hours: 72,967 h, functionality: fully functional, machine/vehicle number: 208574, screw diameter: 18 mm, displacement volume: 23 cm³, Equipment: documentation/manual, Here we offer the following well-maintained pre-owned injection moulding machine as part of our injection moulding machinery trade. Naturally, we also purchase well-maintained injection moulding machines from the current year 2010 onwards. We have been a wholesale dealer of injection moulding machines for over 25 years. Cedpfx Ajwn Nr Esftogp Manufacturer: Arburg Model: 270C 400-70 Control unit: Selogica Year of manufacture: 2008 Operating hours: 75,942 h Machine number: 208574 Extras - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Diverter chute The machine has retrofitted interfaces for: - Tool temperature - Heated runner - Colour / dosing via Siemens Logo PLC control German language - Single owner – origin Germany Regular maintenance by the manufacturer and previous owner Clamping Unit Clamping force: 400 kN / 40 t Tie bar spacing: 270 x 270 mm Platen dimensions: 446 x 446 mm Opening stroke: 350 mm Mould height: 200 mm min. Max. platen distance: 550 mm Ejector stroke: 125 mm Ejector force: max. 30 kN Injection Unit Screw diameter: 18 mm Injection volume: 23 ccm Shot weight: 21 g Injection pressure: 2,500 bar Electrical Pump: 11 kW Heating: 4 zones, 4 kW Installed power: 15 kW Main fuse: 50 A Weight: 2,150 kg Warranty Warranty up to first commissioning Loading/Shipping Free loading on buyer’s truck, or free delivery within Germany against transport charge Available from our warehouse in Hannover, Germany Information about our machines and our company: - We only sell machines purchased from active production for our own stock in Hannover - All machines for sale are inspected and tested prior to dismantling - We do NOT sell insolvency assets – we are NOT brokers dealing in third-party equipment - All machines on offer come from successful companies for whom maintenance is a standard - All machines offered are available for inspection at our warehouse

Condition: excellent (used), Year of construction: 2007, operating hours: 20,357 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 25 mm, displacement volume: 59 cm³, injection weight: 56 g, overall weight: 6,000 kg, Equipment: documentation/manual, Here we offer the following well-maintained used injection moulding machine as part of our injection moulding machine dealership. Of course, we are also actively purchasing well-maintained injection moulding machines from model year 2010 onwards. We have been a wholesale supplier of used injection moulding machines for over 25 years. Cgsdjx Ak I Ijpfx Aftep Current note – Tax information and benefit for used machines: As of 01.07.2025, used machines may also be depreciated using the special 30% annual depreciation allowance. In addition to the lower purchase cost compared to a new machine, you can claim the same depreciation amounts as for a new machine. Reference: Growth Booster (§ 7 Section 2 EStG-E) Vertical injection moulding machine – thermoplastics, with rotary table, 2 or 4 stations Manufacturer: Battenfeld Model: Vertikal R 60 / 125 H Control: B4 Year: 2007 Machine number: 130953 – 100 Vertical machine with rotary table / 2-4 stations (750 mm) Operating hours: 20,357 h Injection unit (125) Screw diameter: 25 mm Screw length: 21.6 L/D Shot volume: 58.9 cm³ Shot weight: 53.6 g Heating capacity: 6.78 kW Heating zones: 4 Nozzle stroke: 200 mm Injection pressure: 2,149 bar Clamping unit Clamping force: 60 tons / 600 kN Opening stroke: 250 mm Min. mould installation height: 250 mm Ejector stroke: 150 mm Max. platen distance: 500 mm Rotary table diameter: 1,040 mm Weight: 6,000 kg Extras: - Light curtain - Automatic suction loader Simar FX 2504, year 2013 - Water manifold - Air valve

Condition: excellent (used), Year of construction: 2004, operating hours: 30,665 h, functionality: fully functional, machine/vehicle number: 196184, clamping force: 1,500 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, Equipment: documentation/manual, Here we, as a trading company for injection moulding machines, are offering the following well-maintained used injection moulding machine. Of course, we also purchase well-maintained injection moulding machines from the year of manufacture 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current notice – Tax information and advantage for used machinery: From 01.07.2025, used machines will also be eligible for a special depreciation allowance of 30% per year for tax purposes. In addition to the more attractive price compared to a new machine, you may claim the same depreciation amounts as with new equipment (ref: Growth Booster, § 7 Abs. 2 EStG-E). Used Injection Moulding Machine with 2 additional available injection units (25 mm and 35 mm) Machine is currently fitted with a 50 mm injection unit. See document for download. Manufacturer: Arburg Type: 470C 1500-350 Year of manufacture: 11/2004 Machine No.: 196184 Control system: Selogica Operating hours: 30,665 h Regularly serviced by manufacturer Csdpfx Afew Rm Hdotsgp Clamping Unit Clamping force: 1500 kN / 150 tons Tie bar spacing: 470 x 470 mm Mould mounting plates: 650 x 650 mm Ejector stroke: 175 mm Opening stroke: 500 mm Mould installation height: 250 mm Maximum daylight between platens: 750 mm Injection Unit 50 mm (high wear-resistant) Shot volume: 392 ccm Shot weight: 359 g Screw diameter: 50 mm Injection pressure: 1670 bar Extras - 2 additional injection units: 25 mm and 30 mm - 1 x core pull - Conveyor belt installed in machine bed - Handling interface - Geiger part removal device - Selection unit - 2 x air blowing ports - Accumulator for fast injection - Electrical connection for pneumatic shut-off nozzle - Technology level 2: servo-driven proportional pumps - 9 electrical heating circuits - Interface for mould temperature control unit - Interface for dosing unit - Equipment package - Extended monitoring, extended movement controls, production control, optimisation/operator guidance, quality assurance, documentation Visible peripheral devices not explicitly named are not included in the scope of delivery. - Immediately available from our warehouse in Hanover. Free loading or free delivered, subject to shipping costs - Function tested (guaranteed functionality up to initial commissioning)

Condition: excellent (used), Year of construction: 2004, operating hours: 30,665 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, displacement volume: 392 cm³, injection pressure: 1,670 bar, injection weight: 359 g, mold height (min.): 250 mm, overall weight: 4,900 kg, Equipment: documentation/manual, Here we, as a specialist dealer in injection moulding machines, offer the following well-maintained, used injection moulding machine for sale. Of course, we are also interested in purchasing well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current Note – Tax Information and Advantage for Used Machinery From July 1, 2025, used machines can benefit from a special depreciation allowance of 30% per year. In addition to the lower purchase price compared to new machines, you can also apply the same tax depreciations as for new equipment (Key term: Growth Booster, (§ 7 Section 2 EStG-E)). The machine is immediately available in our warehouse in Hannover, Germany and has been tested. Manufacturer: Arburg Type: 470C 1500-350 Serial No.: 196184 Year of Manufacture: 2004 Operating Hours: 30,665 h Dimensions (L/W/H): 4.50 x 1.60 x 2.10 m Weight: 4,900 kg Functionality: Fully operational Condition: Very well maintained Special Features Control: Selogica Screw diameter: 50 mm, highly wear-resistant Shot weight: 359 g Injection pressure: 1,670 bar Shot volume: 392 cc Clamping force: 1,500 kN Tie bar spacing: 470 x 470 mm Platen size: 650 x 650 mm Mold height: 250 mm Max. platen distance: 750 mm Ejector stroke/force: 175 mm Clamping unit: Hydraulic Motor power: 18.5 kW Heating power: 9.4 kW Total power: 30.0 kW Extras - 2 additional injection units: 25 mm and 30 mm - 1x core pull - Conveyor belt integrated into the machine bed - Handling interface - Geiger removal device - Selector unit - 2x air blowers - Accumulator for fast injection - Electrical connection for pneumatic shut-off nozzle - Technology level 2, servo-driven control pumps - 9 electrical heating control zones - Interface for temperature control unit (mold) - Interface for color dosing system - Equipment package - Advanced monitoring and motion controls, production management, optimization, operator assistance, quality assurance, and documentation Warranty up to initial commissioning Loading/Shipping Free loading onto buyer’s truck or delivery to site for reimbursement of freight cost from our warehouse in Hannover, Germany Financing On request – hire purchase option Available immediately from our warehouse in Hannover, Germany or delivered to your premises against freight cost reimbursement. The machine is offered fully functional, ownership is solely ours, and it can be viewed under power. Csdpfx Asxn Aygjftogp About our company and machines: - We only sell machines we own, sourced from running production, available from our Hannover warehouse - All machines are inspected and tested before dismantling - We do NOT sell insolvency goods, nor do we act as brokers trading third-party equipment - All offered machines come from successful companies where maintenance and care are standard - All machines are available for inspection in our warehouse

Condition: like new (used), Year of construction: 2008, operating hours: 58,000 h, functionality: fully functional, super well-maintained injection molding machine from clean room (pharmaceutical production) - fully functional with functional guarantee - with GEKU SR 500 ST. linear robot - perfect optical condition Technical data Manufacturer Engel Type e-max 200/100 serial number 170609 Year of construction 2008 Operating hours 58774 h approx. Dimensions L/W/H 4.0 x 1.3 x 1.9 mtr. Weight 3,900 kg Fully functional Condition excellent Clean room Special Control unit CC200 Screw ⌀ 25 mm Injection weight 55 gr./hp Injection pressure 2400 bar Injection volume 59 ccm Clamping force 1000 kN / 100 to. Distance between tie bars 460 x 410 Clamping platens 650 x 600 mm mold mounting height 150-450 mm max distance between platens 800 mm Opening stroke 350 mm Ejector stroke / force 100 mm / 25 kN Clamping unit electric Connected load: 45 KW Rated current: 69 A Csdpfx Asubamvoftegp The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Extras GEKU Robot SR 500 ST Simotion control X-axis: 600 mm Y-axis: 1400 mm vertical Z-axis: 2500 mm horizontal A-folding axis: SWM 45 C-axis : Servo Gripper: SWS16 B-axis: not available Guarantee Warranty until first commissioning Loading/shipping FCA-free loading on the buyer's truck or free delivery against freight reimbursement from our warehouse in Hanover /Germany Financing On request - installment plan option Price: On request

Condition: excellent (used), Year of construction: 2006, operating hours: 69,000 h, functionality: fully functional, Here we offer a permanent maintained injection molding machine. Cgedjm Nclvspfx Aftop from the following machine we have other machines of the same type and same year in stock also with Geiger Robot Manufacturer Engel Type Victory 200/80 Tech year of construction: 2006 Control system: CC 200 Extras -installed Languages: German Englisch -25 mm (wear and corrosion protected) - control CC200 - enlarged clamping plates (B plates) - minimum installation height 250 mm - maximum platen distance 700 mm - quality switch / PD protocol + graphics - 5 x CEE 400 V / 3 x Schuko 230 V - 4 freely programmable inputs and outputs - handling interface Euromap 12 - Host computer interface Engel EMS - Geiger EA Mini 2001 SLI (#156686 0504 4417 / year 2005) - without material hopper or conveyor Clamping unit clamping force: 80 to./ 800 kN tie bar dimension: tie bar-less clamping platens: 730 x 600 (hxv) platen distance: 700 mm max installation height: 250 mm min. opening stroke: 450 mm Injection unit screw diameter 25 mm stroke volume: 69 ccm injection pressure: 2090 bar / 2400 increased Weight: 5,200 kg. dimensions: 4,00 mtr. x 1,40 mtr. x 2,00 mtr LxWxH from our warehouse Hannover /Germany free loading on truck of the buyer or free delivery against freight reimbursement Viewing under electric power possible functional guarantee

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Here we offer a very well maintained constantly serviced injection molding machine. Cgodpfeh Dr E Tox Aftep complete maintenance by manufacturer until current Injection molding machine: Manufacturer / Type: Krauss-Maffei KM80 220 C2 Serial No.: 61006272 year of construction: 2004 Control system: MC4 Clamping unit clamping force: 800 kN /80 tons tie bar distance: 405 x 405 mm Mold installation height min.: 250 mm platen distance max.: 750 mm Clamping platens standard: 610 x 610 mm ejector stroke: 150 mm core pull: 1x pcs. Injection unit Injection unit / cylinder ø30 mm Shot weight max. (ø30):: 77g/hp Injection flow: 73cm³/sec Spec. injection pressure: 2500 bar Handling interface: Euromap 12 Inking interface: Yes Dimensions & Weights Weight with control cabinet: 3,8 t Length: 3800 mm Width (machine only): 1050 mm Height: 1890 mm Oil filling: 270 L Location: Hannover / Lower Saxony The machine is very well maintained and can be inspected under power. Peripherals that may be pictured are NOT part of the offer! The machine available now in our warehouse free loaded on truck of the buyer or free to the door against freight reimbursement

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Here we offer a very well maintained constantly serviced injection molding machine complete maintenance by manufacturer until current Injection molding machine Krauss-Maffei KM 65-160 C2 Injection molding machine: Manufacturer / Type: Krauss-Maffei KM65 160 C2 Serial No.: 61007063 Year of manufacture: 2005 Control system: MC4 complete annual maintenance by the manufacturer clamping unit: clamping force: 650kN /65 tons tie bar distance: 405 x 405mm mold installation height min.: 250mm platen distance max.: 750mm Clamping platens standard: 610 x 610mm ejector stroke: 150mm core pull: 1 x pcs. Injection unit Injection unit size / cylinder ø: 160 / cylinder ø25mm and cylinder ø18mm Shot weight max (ø25): 47g/PS Cedpjh Dp R Eofx Aftjgp Injection flow: 63cm³/sec Spec. injection pressure: max. 2500 bar Handling interface: Euromap 12 Inking interface: Yes Dimensions & weights: Weight with control cabinet: 3.8 t Length: 3800mm Width (machine only): 1050mm Height: 1890mm Oil filling: 270 L Location: Hannover / Lower Saxony The machine is very well maintained and can be inspected under power. Peripherals that may be pictured are NOT part of the offer! The machine is available now in our warehouse free loaded on truck of the buyer or free to the door against freight reimbursement

Condition: like new (used), Year of construction: 2004, operating hours: 30,665 h, functionality: fully functional, machine/vehicle number: 196184, clamping force: 1,500 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, Equipment: documentation/manual, Used injection moulding machine – with 3 interchangeable injection units (25, 35, and 50 mm) Currently fitted with 50 mm unit Includes Geiger picker, integrated conveyor belt Codpevhb Iyjfx Aftegp From ongoing German production, fully functional See document for download Manufacturer: Arburg Model: 470C 1500-350 Year of manufacture: 11/2004 Machine No.: 196184 Control system: Selogica Operating hours: 30,665 h Regularly serviced by manufacturer Clamping unit: - Clamping force: 1,500 kN / 150 tons - Tie bar distance: 470 x 470 mm - Platen size: 650 x 650 mm - Ejector stroke: 175 mm - Opening stroke: 500 mm - Min. mould height: 250 mm - Max. daylight between platens: 750 mm Injection unit (50 mm): - Shot volume: 392 cm³ - Shot weight: 350 g - Screw diameter: 50 mm - Injection pressure: 1,670 bar Alternatively, 25 mm and 35 mm injection units included Extras: - Geiger picker - Handling interface - 2x air blow-offs - Accumulator for fast injection - 9 electric heating zones - 4 free cooling circuits - Optional equipment packages: Extended monitoring, enhanced motion controls, production management, process optimisation / operator aids, quality assurance, documentation - Electric conveyor belt - Sorting unit Documentation and software available in German (fully comprehensive) - Immediately available from our Hannover warehouse, loaded ex works or delivered (shipping at cost) - Function tested (guaranteed function up to first commissioning)