Used Plastic for sale (6,477)

Condition: ready for operation (used), Year of construction: 2007, operating hours: 39,807 h, functionality: fully functional, machine/vehicle number: 5347, clamping force: 6,500 kN, screw diameter: 85 mm, clearance between the columns: 920 mm, column diameter: 920 mm, injection pressure: 2,000 bar, injection weight: 2,600 g, ejector force: 180 N, ejector stroke: 250 mm, opening stroke: 920 mm, total length: 8,870 mm, total width: 2,100 mm, total height: 2,550 mm, overall weight: 32,500 kg, heating capacity: 39 kW (53.03 HP), power: 75 kW (101.97 HP), input voltage: 400 V, Equipment: documentation/manual, For sale is a PLASTIC METAL UNYKA 650 injection molding machine with a clamping force of 6,500 kN (650 tons). The machine is currently in operation and therefore in functional condition. It is available immediately. Technical data: Manufacturer: PLASTIC METAL S.p.A. Type: UNYKA 650 Year of manufacture: 2007 Clamping force: 6,500 kN (650 tons) Machine weight: approx. 32,500 kg Drive power: 75 kW Heating power: 39 kW EUROMAP: 6500H/4165 Serial number: 5347 The machine is currently still in production and can be inspected and demonstrated on-site after prior arrangement. Inspection is only possible after prior arrangement. Loading & Collection The machine can be loaded directly on-site after production ends. Loading with an overhead crane is possible. Nsdpfjzza Egox Afusdb Sale without peripheral equipment. The machine is offered without peripheral equipment. Dismantling, transport, and further processing will be arranged. Availability: immediately If you are interested or would like to arrange an inspection appointment, we look forward to receiving your inquiry.

Year of construction: 2013, condition: used, functionality: fully functional, Equipment: CE marking, "Dual drying system with compressed air expansion + molecular sieve treatment - Weekly timer - Anti-stress system - Compressed air flow rate: 7 - 20 Nm3/h - Maximum temperature: 180 °C - Dew point: -50 °C - Total power: 1 kW - Power supply: 230 V - 50 Hz Nedpfxozlxq Ne Afusdb - Hopper capacity: 50 dm3 - Compressed air pressure: 6-8 bar - Weight: 23 kg"

Year of construction: 1999, condition: good (used), Control or regulator card, type ETR 51. The circuit board was manufactured by Plastic Service GmbH. 11 pieces available. Ndsdozl T S Uspfx Afujb

Year of construction: 2010, condition: good (used), Granule dryer, granule drying system, granule conveyor, vacuum conveyor, vacuum station, drying container, vacuum suction conveying system, vacuum suction device, vacuum loader, hopper loader -Manufacturer: Plastic Systems, granulate conveyor vacuum suction conveying system -Type: PD2-40 FC1 -Side channel blower: Elmo Rietschle -Individual components: see photos Quantity: 1 piece available -Dimensions: 530/520/H1120 mm -Weight: 56 kg Njdpfsy R S Twsx Afuodb

Condition: ready for operation (used), Year of construction: 2026, operating hours: 24 h, functionality: fully functional, machine/vehicle number: 8 cavity, overall weight: 140 kg, total width: 230 mm, total height: 275 mm, total length: 280 mm, Slightly Used (Only 2 Months Old)! Premium quality 8-Cavity Bubble Top Cap injection mould available for immediate sale. We are shifting our production focus entirely to precision engineering components, making this high-efficiency tooling available at a great value. Key Specifications: Application: 20-Litre Water Jar Bubble Top Caps Cavity Count: 8 Cavity Total Shot Weight: 28 Grams (for 8 caps) Mould Material: High-Grade P20 Steel (Core & Cavity) Condition: Used only for 2 months — in pristine, ready-to-run condition. Excellent parting lines and clean finish. Nedpfx Afjz Andmeuedb

Condition: ready for operation (used), Plastic Film Wash Line with Extruder Available in Ireland Can be seen running if necessary Sink Float Tank Centrifuge Washer Dryer Nsdpfezylxiex Afuedb Extruder Granulator Shredder Everything required for the washing and recycling of Plastic Material 1 Tonne per Hour

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, operating hours: 100 h, 5 units: • Gravimetric screw dosing system • Feed hopper with pneumatic rotary flap, each with a lid • Screw conveyor from the big bag feeder with height-adjustable individual frame 1 unit: • Trough screw for merging and conveying the dosing materials into a transfer container. 5 units: • Big bag feed station, with suspension beam that prevents the big bag from collapsing during emptying. • Big bag plate base with discharge aid (vibration drive) Option not included in the price: Control cabinet including control Delivery EXW English Translation: 5 pieces: • Gravimetric screw dosing • Feed hopper with pneumatic rotary flap, each with a lid • Screw conveyor from Big Bag feeding with height-adjustable individual frame Njdpfx Aet S Rduefusdb 1 piece: • Trough screw conveyor for merging and conveying the dosing materials into a transfer container 5 pieces: • Big Bag discharge station with suspension traverse to prevent the Big Bag from folding during emptying • Big Bag bottom plate with discharge aid (vibration drive) Option not included in the price: Control cabinet incl. control system Delivery: EXW

Year of construction: 2025, condition: new, functionality: fully functional, DYNAMIC WASHER Model ERFOR® DR8 Component machine for recycling washing lines ♻️ ♻️ ♻️ Ndedpfxeuqlmzj Afujb Dynamic washers are machines designed for cleaning moderately contaminated and fragmented plastic waste, such as: PP packaging, PVC, PET bottles, shredded big bag materials like LLDPE, LDPE, HDPE, PP, PVC, PS, household chemical waste, and many others. The washers offered by Koltex PRS are easy to operate and reliable machines, which can be configured into a highly efficient dynamic cascade washing system (tandem – 2 x 30 kW, 2 x 55 kW, or 2 x 75 kW). Multi-point water dosing to the screen washers (cleaning system) and active contamination extraction ensure more effective operation, while dynamic feed movement is enabled by rotating impeller blades. The extended screen section (1400 mm) significantly enhances washing quality, and drainage of excess water is ensured by an acid-resistant steel screen. The use of two screen segments improves the ease of maintenance. Model – DR8 Motor power [kW] – 30 / 55 / 75 kW Film drying capacity [kg/h] – 1000 / 1500 / 2000 kg/h Milling drying capacity [kg/h] – 4500 Our portfolio also includes: - Complete plastic recycling systems - DWFS® washing lines - Granulation and extrusion lines For more information, please visit our website.

Condition: used, Year of construction: 2012, Automated system / Application area: Chrome plating, nickel plating, copper plating / Programs: Pre-cleaning, pre-treatment, metallization, post-treatment / Base materials: ABS and ABSPC / Technical data: Product window per carrier 2800 mm x 1700 mm x 300 mm, max. 8 square meters galvanic surface per carrier, cycle time 3.00 min. per system, cycle time 2.50 min. for demetallization / Capacity: 20 carriers per hour, clear anode spacing (chrome) 700 mm, (copper) 700 mm, (nickel) 700 mm, clear entry dimension 550 mm in travel direction, 3100 mm in width, tank dimensions (rinsing) 3100 mm x 700 mm / Power consumption: Drives: transport system 133 kW, filters 194 kW, exhaust air 229 kW, wastewater treatment plant 150 kW, switching systems 704 kW, rectifiers approx. 3190 kW, heating energy approx. 1410 kW / Consisting of: automated loading system with 135 carriers, 5 loading and unloading stations, wastewater treatment plant and exhaust air system / Tanks, electroplating baths and exhaust system made of chemically resistant plastics. NOTE: Various ongoing expansions and modernizations of the plastic electroplating plant since 2015! Nedpfxsy Rvtuj Afusdb

Condition: excellent (used), For sale: a functional, tested set of two Rexroth hydraulic pumps. The pumps are combined into a single unit and equipped with control elements and Rexroth valves. The unit shows signs of use, as visible in the photos. The sale includes the complete unit shown in the photographs. Markings read from the nameplates: Ndsdpfx Aoz Ezvxsfuob Component Designation / Number Rexroth pumps SY2DFE1-11/071-071/... +00908620 Pump material number 00908632 Part number on the nameplates 21559404 01 Serial number of the first pump 1714777 Serial number of the second pump 1766280 Year of manufacture on the pump nameplates A038 Rexroth valves STW 0063-14/24V Valve material number 00905187 Additional number on the valves 21539727 01 Designation on the valves A035

Condition: used, Year of construction: 2005, operating hours: 61,407 h, clamping force: 1,600 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, For sale is an injection molding machine from Arburg, model 470 C 1600-800. The pump and one circuit board have been removed from the machine; therefore, the machine is being sold as defective. Otherwise, it is in very good condition. Technical specifications: Pump operating hours: 61,400 Clamping force: 1600 kN Ndedoz Etu Hspfx Afuob Distance between tie bars: 470 x 470 Ejection stroke: 225 mm Screw diameter: 50 mm Displacement: 398 cm³ Dimensions: 4335 x 1635 x 1950 mm Weight: 6950 kg The machine is offered without any peripherals. Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices are plus VAT. Inspection is possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange is possible! Machine buying and selling WE BUY / SELL PRODUCTION & METALWORKING MACHINES, AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Year of construction: 2026, condition: new, Description: The FR8 flotation tank is designed for density-based separation of plastics in recycling washing lines. The machine separates floating materials from sinking contaminants, improving material purity before further washing, drying, or granulation processes. Suitable for continuous industrial operation 24/7. Materials: PE, PP, HDPE, LDPE, plastic flakes, films Features: Effective density separation (float/sink process) Nodoyh Hx Eopfx Afusdb Heavy-duty industrial construction Continuous operation for recycling lines Easy cleaning and service access Ready for integration with pre-washers, friction washers, and dryers 📩 Available in customized configurations. Contact us for details.

Condition: excellent (used), For sale: a fully functional Müller Maschinen SM 152 shredding mill. The machine is equipped with a hopper, a chamber with blades, a screen, and a control panel with an emergency stop switch. The visual condition and equipment are shown in the photos. Data from the nameplate: - Manufacturer: Müller Maschinen GmbH, Germany - Type: SM 152 Nsdjz Ezt Ropfx Afuedb - Year of manufacture: 2003 - Power supply: 400 V, 50 Hz - Power: 2.2 kW - Current: 5.2 A - Protection rating: IP54 - Machine number: 15203023

Condition: like new (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: DS 013.0091, RAW MATERIAL TOWER PME YOC 2017 TWIN SCREW EXTRUDER WEBER Type : DS 1327 YOC 2017 DIE NORDSON YOC 2017 CALANDER OMIPA Serial 09.38A24 Njdsz Dt Spepfx Afuedb YOC 2017 ROLL PLANA OMIPA Serial 09.38A24 YOC 2017 THICKNESS & DENSITY MEASUREMENT SEREL Serial 4031 YOC 2019 AIR BLOWERS & COOLING CHAPEL OMIPA Serial 22.10A88 YOC 2017 PULL ROLERS AND EDGERS OMIPA Serial 11.35A19 YOC 2017 2 BREAKERS TRIA YOC 2017 GUILLOTINE OMIPA Serial 16.30A19 TRANSPORTATION BELT OMIPA Serial 17.02A49 YOC 2017 10x TRANSPORTATION BELT BIELE WEIGHING BELT BIELE STACKER / ROBOT FANUC Serial E16Y3413 Type A05B-2612-B081 YOC 2016 Load 140 kg 2 SIDE SANDER COSTA Serial LB643001A Type KK9CCCC2200 YOC 2017 PORTAL STACKER BIELE Serial A6213-24 YOC 2017 LASERPRINTER MASCA ID TECHNICAL DETAILS Width : 2000 mm Extruder output : 1250 kg / hr ( possibly 1400 kg / hr ) Raw material PVC Raw material supply is a mixture of powders, ground recycled, micronised recycled Output is PVC plates size 2000 x 1390 x 3,75 mm Elecricity consumption : 41 000 KWH for 5 days production incl startup and stop of the line incl sander and extraction

Condition: excellent (used), functionality: fully functional, Good working condition washing line with Weima shredder WLK1500 and Rotajet dryer and 2 sink float tanks Output capacity 750kg p/h Ndsdpfez Azz Ejx Afujb

Condition: new, Year of construction: 2025, functionality: fully functional, Drying Centrifuge Model ERFOR® CR8 Component device for recycling washing lines ♻️ ♻️ ♻️ The machine is designed for drying plastics—both soft and hard—including: films such as LLDPE, LDPE, HDPE, PP, PVC, PS, PA, post-agricultural films, agro-fibre, shredded big bags, PP sacks, fishing nets, peat packaging, and many more. Drying centrifuges Model - CR8 55/75 Motor power [kW] - 55/75 kW Film drying capacity [kg/h] - 1500/2000 Dimensions (L*W*H) (mm): 1970*2800*2060 / 2100*3150*1900 Ground material drying capacity [kg/h] - 5000 Our offer also includes: Complete plastic recycling systems DWFS® washing lines Granulation and extrusion lines For more information, please visit our website. Njdpfx Aeuql Rtsfujdb

Condition: excellent (used), For sale: a Rapid 1514 shredding mill from the Range 15 series. The machine has been inspected and is in working order. It is suitable for shredding appropriately selected materials, including plastic waste. The unit features a feed hopper, a cutting chamber with blades, an electric motor, and a control panel with an emergency stop switch. The photos also show the interior of the working chamber. Data from the nameplate: - Manufacturer: Maskin AB Rapid, Sweden - Type: 1514 - Series: Range 15 - Year of manufacture: 1994 - Machine number: 260319 Nsdpfxoz Ezuuo Afuodb The machine is used and shows signs of wear, which can be seen in the photos. The condition and scope of equipment are shown in the photographs.

Condition: used, Year of construction: 2006, operating hours: 5,000 h, functionality: unexamined, machine/vehicle number: 61007689, overall weight: 5,400 kg, input frequency: 50 Hz, input voltage: 400 V, This KRAUSS MAFFEI KM-100-380CX injection molding machine, manufactured in 2006 with approximately 4,700 operating hours (as of 03/2025), will be auctioned off in our online auction "Liquidation of a well-known toy manufacturer – injection molding machines, warehouse equipment, logistics accessories – STEP 3". You can find this and many other items from the fields of injection molding & plastics technology, warehouse & conveyor technology, and workshop equipment on our RESTLOS auction platform. Machine details: including all peripherals installed on the machine Ndedpfjz Erz Ssx Afuob Year of manufacture: 2006 International size: 380 CX/100 Own weight: 5,400 kg Reported operating hours as of March 10, 2025: 4,704. The machine has already been disconnected from the power supply and can no longer be switched on; all fluids are still in the machine, as stated. as pictured basically without any other items basically, functionality is untested.

Condition: used, Year of construction: 1990, functionality: fully functional, Rolling mill, manufacturer Reinhardt - 2000 mm wide - Hydraulic gap adjustment - Stock blender with traversing function - Pneumatic cut-off device with control cabinet - Display for process monitoring/control of gap/speed... - Hägglunds hydraulic drive offering a complete mixing line at an attractive package price. Njdez Ery Uepfx Afusdb

Condition: excellent (used), Year of construction: 2004, operating hours: 88,926 h, functionality: fully functional, machine/vehicle number: 194501, clamping force: 600 kN, screw diameter: 25 mm, clearance between the columns: 370 mm, overall weight: 2,930 kg, Equipment: documentation/manual, We are selling a very well-maintained 370C. The machine is connected to the power supply and can be inspected at any time. 1x core pulling unit, hydraulic, Ndjdpfsz Dq I Usx Afueb Drop-off switch, Handling interface EM67

Condition: used, Year of construction: 2006, operating hours: 18,985 h, functionality: unexamined, machine/vehicle number: 513426, clamping force: 400 kN, injection pressure: 2,292 bar, overall weight: 2,600 kg, input frequency: 50 Hz, input voltage: 400 V, This FERROMATIK MILACRON K-TEC 40 injection molding machine, manufactured in 2006 with approximately 19,000 operating hours, will be auctioned off in our online auction "Liquidation of a well-known toy manufacturer – injection molding machines, warehouse equipment, logistics accessories - STEP 3". Nedjz Erx Repfx Afuodb You can find this and many other items from the field of injection molding and plastics technology, warehouse and conveyor technology, as well as workshop equipment on our RESTLOS auction platform. Machine details: including peripherals installed on the machine Year of manufacture: 2006 Clamping force: 400 kN International size: 400H-265 Injection pressure: 2292 bar Displacement: 99 cm³ Weight: 2,600 kg Reported operating hours as of March 10, 2025: 18,985. The machine has already been disconnected from the power supply and can no longer be switched on; all fluids are still in the machine, as stated.

Condition: used, Year of construction: 2005, functionality: fully functional, total width: 11,500 mm, total length: 16,500 mm, total height: 4,350 mm, -Cooling section from VMI -Swiveling discharge conveyor -Strip/felt dimensions of approx. 70mm-800mm width Ndjdpfxjz Eppgo Afuob -24 cooling fans -Stainless steel dip tank and reservoir -Pallet magazine -Pallet cleaning with extraction system -Drive unit replaced -Chain replaced -Transverse conveyor with 2 pallet positions -Hydraulic lifting table -Weighing scale -Various stacking options on pallets, DB Gibo, cardboard packaging, etc. -Other equipment from the production line is also available for sale. Attractive package price possible.

Condition: good (used), Year of construction: 2007, operating hours: 63,868 h, functionality: fully functional, machine/vehicle number: 413089, clamping force: 500 kN, screw diameter: 30 mm, overall weight: 3,400 kg, We are selling a fully functional EE50. Nodpfxjz Dq N Ss Afujdb It is connected to the power grid and can be inspected at any time. Accessories: Handling interface EM67.

Year of construction: 2024, condition: new, noris- Extruder MINI ESE 20/25 D Technical data Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 20-200 min -1 Screw axial pressure [bar] 300 Continuous load 350 maximum Drive Three-phase drive with frequency converter Drive power [kW] max. 2.5 Reduction gear with integrated axial bearing Weight [kg] approx. 160 Dimensions [Lx Wx H] [mm] approx. 1050 x 600x 1590 *) Electrical connection values 3 / N / PE Supply voltage [V] 400 at 50 Hz Control voltage [V] 230 Temperature control electrical resistance heating bands in mica design. Max. processing temperature [°C] 300 Switch cabinet and control panel Ndodpfx Aohx Elfofuob The electrical installation of the extruder is located in the machine base. The base contains all the necessary switching, control and display devices. The feed zone is water-cooled, the water connection is provided by the customer, a cooling unit for cooling the water is not included in the offer. Extruder tools are not part of the offer

Year of construction: 2024, condition: new, functionality: fully functional, We are a manufacturer of complete technological lines for washing and granulating plastics. We also offer individual devices such as centrifuges, washers, screw presses, and flotation tanks. A high-performance plastic washing and granulation line, engineered for processing a wide range of materials including PE, PP, HDPE, LDPE, LLDPE, PS, and ABS. This comprehensive recycling solution efficiently manages cleaning, drying, and granulation processes, ensuring the production of high-quality recycled material. Each line is custom-designed to meet the specific requirements of our clients, with throughput capacities ranging from 300 kg/h up to 2,500 kg/h, providing the ideal solution for operations of any size. The system is built for long-term durability and user-friendly operation, making it suitable for both small and large-scale recycling plants. Advanced technologies maximize productivity, reduce energy consumption, and ensure consistent results, delivering a reliable and cost-effective solution to enhance plastic recycling efficiency. Njdeuqu Uhopfx Afuodb Please contact us for inquiries and quotations. Erfor.pl