Traysealer

Meca Plastic Meca

Condition: new, machine/vehicle number: 1602-2-2, mileage: 5 km, power: 96 kW (130.52 HP), fuel type: diesel, empty load weight: 2,750 kg, maximum load weight: 750 kg, overall weight: 3,500 kg, wheelbase: 3,445 mm, fuel: diesel, CO₂ emissions: 196 g/km, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: steel, loading space length: 3,500 mm, loading space width: 2,250 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, traction control, Citroen Jumper Euro6 3500Kg new vehicle EU new car Mileage 5 km Fuel Diesel kW/hp 96/131 Manual gearbox 6 gear ccm 1.997 cm³ Particle filter, air conditioning, daytime running lights, reversing camera, ESP, ABS, on-board computer, heated mirrors, electric front windows, central locking with remote control, emission class (NFZ): Euro 6, COC papers. Sales body made of GRP Superlight in sandwich construction with alcove, unused and with a large sales hatch across the entire width of the vehicle on the right, 2/3 seater, driving license class B, rear running board, LED lights, reversing camera, non-slip industrial floor R11. Various low-frame chassis available (Fiat, Citroen, Opel). Box body interior dimensions WDH 3500 x 2250 x 2300 mm Side flap 3270 x 1480 mm Permissible total mass 3,500 kg Unladen weight 2,750 kg Paint finish on request Interior fittings Left-hand side: 1 work surface with stainless steel worktop, sliding doors and intermediate shelf, approx. 3500 x 600 x 850 mm 1 double washbasin approx. 600 x 600 x 850 mm WxDxH incl. fresh and waste water tank, boiler and pressure system, soap and paper dispenser. 12V automatic battery charger for the starter battery. 4 wall shelves in white with aluminum edge profile, 2x left 1250 mm and 2x right 1250 mm. Right-hand side: 1 refrigerated counter in 800 mm depth with compressor, storage compartment with extra doors at the bottom, foam insulated housing, display surface in stainless steel, aluminum work surface and front glass, temperature from +1°C to 7°C, approx. 3500 x 800 x 1100 mm WxDxH. Further equipment: Shelf above the sales flap, folding bag shelf at the sales opening. 2 LED panels on the ceiling, 3 dimmable LED spotlights above the sales counter and LED counter lighting. Standard electrical installation 380 volt/16A switchable to 230 volt/16A, 2x feed socket according to CEE standard, RCD circuit breaker, 16 ampere fuse with acceptance, 5 double sockets, hygiene package. Gbodpfxjf D Eg Ts Ag Teg Subject to errors and prior sale!

Year of construction: 2007, condition: excellent (used), machine/vehicle number: 33-010, 16 station Gathering machine, handfeeding station, Criss-cross delivery, Spiral raceway, Main milling station, Spine preparation unit, Spine and side glue unit, Cover feeder, Single nipping station, Laydown delivery unit onto conveyor system. Gjdpfx Ageh T Dhqe Tobg

Year of construction: 2010, condition: excellent (used), MULTIVAC T-800 ID.NO. 2569 Gbodspcda Ropfx Ag Tsg Multivac T-800 Trough sealer vacuum / gas with 2x complete tools, Tool trolley, vacuum pump, Carsö trough dispenser etc. Year mod 2010 very nice condition! Tool 215 x 167 mm No. 2. 236 x 186 mm. Dimensions line 800 x 100 H 200 cm.

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Gbjdpfx Ajiyx Uzjg Tog Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x addituional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Condition: used, D-6886-Delford Type SP 800 Gbedpfxsc Nlxpo Ag Tjg Delford SP800, Film wrapping machine, Packing materials: stretch films 12,5 – 25 micron (50-100 gauge) P.V.C. or any suitable heat sealable types. Max. roll with 450 mm, max. roll dia. 250 mm. Speed of operation: 40 – 80 packs per minute. Max. Packs sizes: L 300 mm, W 200 mm, H 120 mm, Girth 420 mm, Min. Packs sizes: L 130 mm, W 90 mm, H 10 mm, Girth 200 mm, Dimension: 5290 x 1049 x 1430. Machine weight: approx. 1400 kg.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 52,455 h, functionality: fully functional, machine/vehicle number: 2501-0154, turning length: 600 mm, turning diameter over cross slide: 140 mm, turning diameter: 300 mm, spindle motor power: 25,000 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, torque: 239 Nm, bar passage: 80 mm, feed rate X-axis: 165 m/min, feed rate Y-axis: 165 m/min, feed rate Z-axis: 220 m/min, overall weight: 10,500 kg, Equipment: documentation/manual, Machine is still in use and can be seen working at VOVU Machining in Uden. In total there are 6 identical machines here. Fanuc 310is controller Gbedsur Hfzspfx Ag Tog

Condition: like new (used), Type: SEALPAC 800 Capacity: 10-12 tact / min. Trays dimensions: 325 x 265 x 100 max. - 2 pc/ tact Compressed air: 8 bar - 650 l/ min. Water consumption: use of a closed circuit is recommended, ~ 4-6 Liter/min Machine dimensions: Length: 4800 mm Width: 950 mm Height: 2 100 mm Voltage: 380 / 230V Gsdpfx Agepbv Une Tobg Power: 10 kW

Condition: excellent (used), Year of construction: 2008, Machining center Manufacturer: Weeke Type: BHX 500 Year of manufacture: 2008 machining dimension X: 2.500 mm machining dimension Y: 1.300 mm Machining dimension Z: 4 - 80 mm Gbedpfx Ajh E Sgheg Tjg Number of milling units. 2 Number of drilling units: 2 Drilling spindles vertical: 72 drilling spindles horizontal X: 16 drilling spindles horizontal Y: 4 grooving saw: 90° tiltable speed X-axis: 130 m/min speed Y-axis: 80 m/min speed Z1-axis: 50 m/min speed Z2 axis: 27 m/min Speed: 18.000 rpm Disassembled - directly available

Year of construction: 2012, condition: refurbished (used), MAZAK laser cutting machine STX510 MkIII 4kW ==TOP CONDITION – OVERHAULED 2023== year: 2012 refurbished, MAZAK lasercutting machine with 4000W table size: 3000mm x 1500mm machine dimension 2,9m x 7,3m chip conveyor LAN / USB connection automatic nozzle change fast piercing in heavy materials piercing sensor plasma sensor for stainless steel cutting burning sensor for mild stelle cutting full covered machine table FE: 22mm VA: 15mm ALMG: 10mm plastics possible to cut incl. software Gjdpfsnwmw Ssx Ag Tobg incl. exhauster == option: warranty, setup, training == == option: fully automatic loading/unloading CELL system ==

Year of construction: 2015, operating hours: 2,450 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 222837, We are selling a T 700 XS from a vegetarian production as good as new. Enclosed 4 tools incl. tool change trolley. Vario 1, tray 171 x 127 mm, 3-use (1-track, 3-row) Vario 2, tray 187 x 137 mm, 3-use (1-track, 3-row) Vario 3, tray 122 x 96 mm, 4-use (1-track, 4-row) Vario 4, tray 227 x 178 mm, 2-use (1-track, 2-row) See detail in PDF Godpfjq Umumsx Ag Tobg