The Product can be cooked in steam or water
cooking length 10,800 mm, approx. 1,000 mm rinsing zone
belt width 1.150 mm
mesh width 4 mm
water capacity: ± 6,200l boiling water
suitable for steam heated (2 bar)
dimensions (l x w x h ) : ± 12,400 x 2,300 x 4,131 mm
with lower belt
top hold down call
water circulation pump
suitable for CIP cleaning
insulated member more
The Moba maxipack M16 and M22 are the only machines that are able to package entire chickens in a bag, both frozen and fresh end products. The maxipack is an extremely reliable machine. Therefore, these machines are well-known in the chicken slaughtering industry for decades. The maxipack is made of stainless steel and high-quality, wear-resistant plastics. These ensure that the maxipack is able to continue to run for years in the production process after extensive mechanical, electrical and ele... more
A functionally tested and ready-to-use universal machine Fessmann T1900 Turbomat Plus is being sold here. With this machine you can
NP about 95.000,-€. The outside dimensions are W/D/H 126/108/263cm.
The smoke generator is located at the bottom of the smoke chamber.
The interior dimensions of the system are W/D/H 110/86/164cm, smoke outlet on the top right and supply air on the left, with integrated cleaning program.
with operating instructio... more
co-extruder for 2 components
all stainless steel
product weight range : 10 to 300 gr (weight proportion between casing and filling is adjustable)
capacity : up to 60 pcs/min.
max. output capacity : 360 kg / h
adjustable belt speed
machine dimensions (l x w x h) : 1,600 x 1,100 x 1,700 mm
machine weight : 500kg more
High-Speed Cutter Vacuum HCV 220 at a super price and extended
Fine cutting, mixing and emulsifying of the processed raw material of any kind.
Bowl capacity : 220 l.
Speed of blades : mixing - 100 - 200 ot/min. cutting - 100 - 5000 ot/min.
Bowl rotation speed : 5, 10, 15, 20 ot/min
Discharge speed : 60, 105 ot/min.
Cutter consists of :
machine body - feet with adjustable screws, 7 pcs. bowl, 1 pcs. cutting head (6, 8 knives), 1 pcs. cutter shaft, 1 pcs. cutter h... more
We are selling a refurbished Pökelinjektor Günther PI 9 with the following connection data:
Machine number 25 892, 400V, 50Hz, 1,5kW, 16A fuse, 16A plug, year 1999, reconditioned, with extra impeller, new hoses
The injector has 9 needles.
CE mark, Made in Germany.
Of course, there is a manual, as well as a rod for lifting the lid during cleaning.
Outside dimensions B / T / H 140/56 / 170cm
Tape length 65cm
Needle size outside diameter... more
• Hot air oven with grates and trays, tested, fully functional
• Manufacturer Convotherm, Germany
• Type AR 72
• Year of construction 04/1992 (manufacturer information according to serial number)
• External dimensions, W x D X H in cm: 112 x 75 x 154
• Cooking space dimensions W x D x H in cm: 68 x 65 x 93
• Grid-grate size W x D in cm: 59 x 49
• Sheet size W x D in cm: 59 x 49
• The removable grate and baking tray insert has 12 slots
• 10 gratings and 2 baking trays are included in... more
all stainless steel
cooking length 11,000 mm
belt width 1,000 mm
suitable for steam heated or thermic oil
dimensions (l x w x h ) : ± 14,000 x 1,900 x 1,800 mm
with lower belt
top hold down call
adjustable speed more
Abschwarter, derinding, Schwschwarter
-Transition in actual condition as visited
-Conveyor belt and pressure rollers would have to be exchanged
-Stainless steel surface
-Working width, bell length 500 mm
-Rinds strengthen attitude
-Ein and outlet conveyor
-Dimensions 2060/800 / H1140 mm
-Weight 300 kg more
CFS TWG 4800 / 600
CFS mod Twg 4800 / 600 double belted oil teflon cooker 2x 4.8 meters roasting area x 60 cm width. Year 2002 was directly withdrawn from production now this spring. more
On behalf of a butcher's shop for the purchase of a semi-automatic can closure machine:
• Pneumatic can closure machine in very good condition
• Manufacturer Stiller, Bad Rappenau, Germany
• Type DV 10 PS
• Year of construction 2005
• Current new price (successor model) approx. Euro 9,000.- net
• For sealing (flanging) round sheet aluminum or combination cans
• Made entirely of stainless steel and aluminum alloys, thus for wet and dry operation
• Two-hand safety control
• Easy handlin... more
belt width 450 mm
speed up to 120 strokes/min.
adjustable cutting angle
3 x 380 V, 50 Hz
max. product dimensions (l x w) : 450 x 160 mm
dimensions everywhere (l x w x h) : 2,300 x 1,800 x 1,800 mm more
Tumbler Rühle MTR 150, Vacuum tumbler
approx. 150 litres of content, mixing arm with 2 speeds, digital control,
vacuum pump, new vacuum hoses and gauge,
Dimensions LxWxH approx. 110x75x136cm, weight approx. 230kg,
good used condition, works perfectly more
GRASSELLI NSL 400
Grasselli NSL 400 one all slicer year 2011. Knife sharing 10 mm. Automatic dispensing belt, central lubrication. Very nice condition tidage used in a border shop. more
Sale as line
or also single sale possible
Please ask for retail prices.
Line from CFS for cutting, weighing, checking, packing, labelling
consisting of: 1 Slicer, manufacturer: CFS, type: Mega Slicer, year of construction: 2008, serial no.: 4044602577
1 Checkweigher, manufacturer: CFS, type: Check 3000
1 rocker 1 upper band, length approx. 300 cm
1 feeding belt, length approx. 300 cm,
1 foil dispenser
1 packaging machine, manufacturer: CFS/TIROMAT, type: Powerpack, serial no.: 685/03... more
all stainless steel
belt width 600 mm
in- and outfeed mesh wire belts (5mm)
input height 1,000 mm (adjustable between 950 and 1,050 mm)
2 rolls : top & bottom marking
temperature of the rolls is separately adjustable
adjustable gap height (between the rolls)
marking : parallel lines of 3 mm thick with an intermediate space of 10 mm
dimensions (l x w x h) : ± 1,800 x 1,600 x 1,600 mm
weight 700 kg more
Bastra 300 L boiler, electrically heated,
Built 2000, connection 400 V, power 18.9kW
external control, dimensions basin approx. 90x80x40cm
Total dimensions LxWxH approx. 111x133(145 with tap)x106cm,
weight approx. 300kg,
very good used condition, works perfectly
TIPPER TIE SV 4600
Tipper Tie SV 4600 double clip machine capable of calibrating between 50-130 mm. Can also run up to 180 mm depending on the intestinal quality. Can be used for all vacuum stops. The machine can also hang on the product. more
Like all the Talsa range of bowl cutters the K120v is made entirely from stainless steel with an extremely thick stainless steel cast bowl. The K120v bowl cutter can be varied in speed from 1000rpm to 4000rpm in steps of 100rpm by using the simple electronic control panel.
Year of construction: 2013,
s/s bowl and knives, plastic rejector and cover,
400 V, 3 Ph, 50 Hz, 59 A,
dimensions: 2520 mm x 1300 mm x 1700 mm. more
Bacon cutter Treif 1304, Picollo 2,
with 2 gate sets 6 and 12mm, empty frame, cutting board,
Shaft size 84x84mm, built 1990,
Built 1990, dimensions LxWxH approx. 110x63x99cm, weight approx. 209kg
very good used condition, works perfectly more
Pipe track slide hook, Euro hook, meat hook, butcher hook
-light width 307 mm
-Upper part: Flat steel 35 x 12 mm galvanized
-Bottom part: NIROSTA O 16 mm
-Bearing capacity: 250 kg
-Multiple hooks available
-Eigen weight 1.4 kg more
A practically unused mixer grinder Kolbe MWE 52 is sold here. This meat grinder with lid has the following characteristics:
stainless steel gearworm
year of construction 2007
machine No. 126 0704
power 7.5 + 1.1 kW
380V 3 phases
Control voltage 24 VAC
Operating voltage 400V 3 phases
Nominal current 15.2 + 2.8A
Circuit diagram 4774 N.
Manufacturer: KOLBE Nirotechnik * Maschinenbau, Kolbe GmbH
We have tested this automatic grinder, ready... more
Type: EFA Z14
Weight: 27 kg
Blade opening at the front 120 mm
Length 660 mm
Cutting cycle under load of 7.0 - 3.5 seconds
Hydraulic working pressure 200 bar
Pneumatic control 2.0 - 6.0 bar
Safe two-handed switching
The EFA company specializes mainly in the production of slaughtering equipment, saws and shears. Thanks to innovative solutions in the field of technology, the measure of the professionalism of meat processing plants is working on EFA brand equipment.
Application / pu... more
all stainless steel
frying length 8,000 mm
belt width 630 mm
oil circulation pump
suitable for fire protection
sediment removal system
overall dimensions (l x w x h) : ± 11,550 x 1,700 x 2,900 mm
"Marel" oil storage tank
Type TOT 2000
capacity 2,000 L.
dimensions (l x w x h) : ± 1,420 x 1,550 x 2,800 mm more
Meat grinder Alexanderwerk HSN 114 I
Machine complete in stainless steel, with numerous discs and knives,
Connection 380V, power 5.5kW
Dimensions LxWxH approx. 107x70x110cm, weight approx. 276kg
very good used condition, runs flawlessly more
We are selling a functional overhauled vacuum filler Handtmann VF100 with lift and linker.
for filling, portioning and twisting
comes with intestines case holding unit
worldwide shipping can be organized
• Flake ice maker in butcher's shop in need of repair
• Manufacturer Maja
• Type SA60
• Year of construction 1990
• According to the cooling system service, the compressor has been used up
• The device only reaches a maximum of minus 6 ° C
• Selling expressly as DEFECTIVE, for cannibalization or repair
• For the rest, see photos more
Injector Pökomat P14, peniter injector with 14 needles
with new hoses and connections, new holders,
Connection 400V, built in 2004
Dimensions LxWxH approx. 125x50x180cm, weight approx. 170kg,
Machine in very good used condition, runs flawlessly.
- Stainless steel body
- cut by guillotine (knife).
-The meat is pressed into a mold and cut,
- then placed on a conveyor bath by vacuum.
-Working method electropneumatic
-Dimensions L / W / H 2600/700/1730 mm more
The Machineseeker trust seal gives buyers the ability to detect whether they have to do it with a trusted seller at a glance .
What do we check?
Check of the trade licence or commercial register extract.
Check the address of the dealer.
Validation of Bank connection .
Verification of the telephone accessibility the main phone number.
Credit report must not contains negative criteria.
Buyer complaints can lead to the withdrawal of the seal.
What does this mean for buyers?
Buyers can restrict the circle of potential business partners without extensive checks and favor companies that make honest and righteous shops with high probability.
Of course, disagreements can still arise during the purchasing process. Maschinensucher resp. the Machineseeker Group GmbH is not liable for legal infringements of the buyer resp. seller active on Maschinesucher resp. Machineseeker.
There is no right to the grant of the Machineseeker trust seal. In addition, the seal can be removed.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH does not accept any liability for the content of linked websites.