Used Processing Machine for sale (68,908)

Condition: used, Year of construction: 2012, Trio FDS3000 skinner for up to 150 cod fillets a minute. 460mm wide conveyor. Csdpfjzawqrex Albjgu

Condition: good (used), GEA EasyFryer 4500/600 electrically heated fryer. 4.5m frying length, 600mm wide. High power 305 Kw model. Has come direct from ready meals factory where it was frying meal components. In lovely condition. CURRENTLY IN FINLAND, BEING LOADED MID JUNE 2026 Codpfxovutgzo Albsgu

Condition: refurbished (used), Year of construction: 2010, Laska WW 130 2 Cross feed Mincer 2 speed machine Year 2010 All stainless steel Safety interlocked grill lid Cgsdpfx Alezbt N Hsbsu 130 mince head Up to 3 mince plates and 2 x 4 bladed knives Motor 17 Kw - 35 amp

Condition: good (used), Year of construction: 2011, Fish Skinning Machine Make: Nock Model: TFE350 2011 Cgodpoycklzefx Albju Refrigerated drum, with built in compressor With various spares

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 1 x N&N Nadratowski / Orbmix twin-shaft mixer grinder with tote bin tipper/column loader. Supplied with various hole plates. Suitable for a variety of products including meat, poultry, fish, vegetables, petfood, sandwich fillings, etc. Model - MG-450/160. Date of manufacture - 2011. Csdpjwplc Asfx Albogu Mixing capacity - 450 litres (approx 350 litres of product). Output - up to 2,000 kg/h, depending on product. Electric supply - 400 V / 50 hz / 3 phase. Power - 24 kW. Weight - 1530 kg (mixer grinder) and 282 kg (column loader). Previous use - for mixing and grinding a poultry and vegetable mixed product.

Condition: used, Year of construction: 1998, x-travel 1120 mm y-travel 510 mm z-travel 510 mm control Mazatrol M Plus spindle turning speed range 0-7000 U/min tool taper Cat 40 tool piece magazine with 24 Plätzen max. table load 500 kg Codey Ty Eajpfx Albjgu table dimensions (lengthxwidth) 1460 x 510 mm Overall size 3600x2700x2590 mm machine weight ab. 5850 kg Equipment/Accessories: - 4 vices - 1 chuck - 18 tool holders with tools - Transport locks - USB flash drive with data backup - Technical documentation

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, BIG BOX lifting platform, with tilting table for loading; load capacity 1000 kg. Cjdpfszbrdvox Albogu The lifting platform can be operated separately via the tilting table, as the table and lifting platform are electrically connected. 4 units available. Price per unit: €5,900.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, For sale is a Kolbe K330 bone saw, manufactured in 2007, 380V, V2A stainless steel. The saw is fully functional and ready for immediate use. Cgsdpfxozbvbxs Albju Further details available upon request. Payment in cash or by advance payment! Sale only to business customers. No guarantee, no warranty.

Condition: refurbished (used), Year of construction: 2006, machine/vehicle number: 439917, type of input current: three-phase, total length: 2,200 mm, year of last overhaul: 2025, working width: 1,800 mm, total width: 2,200 mm, total height: 1,380 mm, roller length: 915 mm, overall weight: 4,082 kg, Fully refurbished Roskamp SP 1600 Roller Mill Single high pair Roll length: 915 mm Cedpjx Aifljfx Albogu Roll diameter: 405 mm Weight: 4,082 kg Motor power: 45 kW Year of manufacture: 2006

Condition: used, Year of construction: 2015, x-axis 1250 mm y-axis 840 mm z-axis 550 mm control Siemens 840D turning speed range - main spindle 12000 min/-1 drive capacity - main spindle 22,5 kW Torque max. 140 Nm Number of tools 24 St. max. tool length 320 mm spindle taper HSK 63 Number of working hours 56000 h spindle hours 17500 h weight of the machine ca. 9,7 t This machine can be viewed under power by appointment and is in our estimation in very good condition. Cgjdjy Tbtlspfx Albju Furnishing: - IKZ - chip conveyor - Glass measuring rods in all axes - automatic door - Swivel axis with counter bearing, Fibro There are 4 identical machines available. The machines were used for light countersinking and drilling work. Changes and errors in the technical data and information, as well Subject to prior sale!

Condition: ready for operation (used), functionality: fully functional, Wolfking 1500 L spiral / paddle mixer whit discharge hatch in the bottom. Very strong built model that is perfect for hard and heavily products. Cjdpfxjy Tl Rho Albogu

Condition: used, Wolfking TSMV 1750 L double-paddle mixer designed for cooling with injection and vacuum. A very strong and reliable machine. Codsy Tl Imspfx Albogu

Condition: used, functionality: fully functional, Year of construction: 2025, Schwamborn Concrete Processing Machine STR 702 S -1200 STR 702 S -1200 — Year of manufacture 2025 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Cgjdpfxey A E I Eo Albju Price EUR 3,950 plus VAT | EXW Einbeck | Delivery upon request

Condition: used, functionality: fully functional, Year of construction: 2022, Schwamborn Concrete Processing Machine DSM 250S 230 V DSM 250S — Year of manufacture 2022 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Cgodpfxoy A E Ifo Albju Price EUR 4,700 plus VAT | EXW Einbeck | Delivery upon request

Condition: excellent (used), Kolbe band saw model K430 s. I have got 5 available. Cgedpfxsy U Ht Hj Albou

Condition: excellent (used), Formax shuttle conveyor was previously working on Burger King burgers. Cgsdpfx Alsy U Htmobju

Condition: used, Strip Processing Line - Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Excellent equipment and feed-in aids Required floor space for the complete line (L x W): approx. 7000 x 3000 mm Total weight of the system: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rollers: 7 pcs Straightening roller diameter: Ø 40 mm Number of pinch rollers: 2 pcs Pinch roller diameter: Ø 80 mm Entry height, pass height: 1500 mm - Straightening rollers hardened, ground, and hard-chromed, with central support - Pinch rollers hardened, ground, and hard-chromed, with hydraulic disengagement - Manual straightening roller gap adjust - Feed-in aid with hydraulically extendable tongue and hydraulically adjustable deflection roller - Adjustable side strip guide - All straightening rollers driven via distribution gearbox with cardan shafts - Both pinch rollers driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightening machine opening stroke 250 mm for cleaning or processing thicker material, stroke movement via trapezoidal thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Nett weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outside diameter: max. 1600 mm (with coil car) Coil outside diameter: max. 2000 mm (without coil car) Coil turntable diameter: Ø 1700 mm Coil inside diameter, expanding range: 460-520 mm Coil width, nominal: max. 630 mm Spreader jaw width: 750 mm Height of the decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear Cgsdpfx Aleif Sg Sebeu - Pneumatic run-on brake on decoiler drum, TWINFLEX - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic hold-down arm with hydraulically driven double pendulum roller - Coil car with 12 tons lifting force and 300 mm stroke - Decoiler frame above floor with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Nett weight: approx. 5 tons Central hydraulic unit, adjacent Tank capacity: 350 liters Motor power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Nett weight: approx. 800 kg Electrical cabinet, adjacent - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Nett weight: approx. 800 kg

Condition: used, Year of construction: 2020, functionality: fully functional, Professional, fully automatic slicing machine, Bizerba VSI 330 F T, manufactured in 2020. Ideal for butcher shops, food production, self-service counters, or catering operations with high throughput. The vertical, fully automatic system with a conveyor belt enables continuous, hygienic slicing (hygiene protection IPX5, CE-compliant). Condition: • Used, well-maintained • Regularly serviced • Operating logbook available Location: Selters. Shipping or pickup from the location is possible. Technical specifications: Manufacturer: Bizerba Model: VSI 330 F T Year of manufacture: 2020 Cgedeza Aiaepfx Albeu Blade diameter: 330 mm Slice thickness: approx. 0.3 – 12 mm Capacity: up to approx. 80 slices/minute Design: vertical, fully automatic Version: F T with conveyor belt Hygiene protection: IPX5 CE marking: present Location: Selters

Condition: used, functionality: fully functional, Complete smoking system for butcher shops/food processing, supplied as a set – ready for operation and including all accessories for immediate use. Scope of delivery: • 1 × L'Unité Stein RAKO 3001 smoking cabinet (used) • 1 × Tecumseh Silensys H84Z refrigeration unit • 1 × Stein RRT M exhaust system (for V21 smoking cabinet), including stainless steel pipe, 30 linear meters, Ø 20 cm Cgsdpfoza Ah Nex Albsu • 407 pieces of knot-free beech smoking wood (8 × 6 × 40 cm) Condition: • Used, well-maintained • Regularly serviced • Operating log available Location: Selters. Collection or transport from the location is possible. Further photos and details available upon request. Technical data: Smoking cabinet: L'Unité Stein RAKO 3001 (used) Refrigeration unit: Tecumseh Silensys H84Z Exhaust system: Stein RRT M (for V21 smoking cabinet) Stainless steel exhaust pipe: 30 linear meters, Ø 20 cm Smoking wood included: 407 pieces of knot-free beech wood, 8 × 6 × 40 cm Condition: used, well-maintained, regularly serviced Location: Selters

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Cutter Seydelmann Type K60 AC 8 Year of manufacture: 2015 Cjdpfx Alezawnqjbogu Shipping possible Made of solid, stainless steel 60-liter bowl made of solid, stainless steel 6 infinitely adjustable, pre-programmable knife speeds 2 mixing speeds for forward and reverse operation 2 bowl speeds Micro 114 Digital display for temperature, running time, and speed Housed in a separate stainless steel casing Noise-reducing lid 40 kW, 400V, 50 Hz Separate stainless steel cabinet Includes 6 used cutter knives with accessories CE compliant

Condition: excellent (used), functionality: fully functional, Grasselli NSL 600 Industrial meat slicing machine Many spare parts available Shipping possible Production capacity: 2000 kg/h (depending on the product) Working width: 600 mm Including cutting set: 19 mm (9.5 mm) Options: BI version (for products with bones) Voltage: 400 V (3+N, 50 Hz) Codpezawl Njfx Albsgu Power: 4 kW Weight: 730 kg Compressed air connection value: 7 bar Input dimensions of the cutting chamber in mm (W x D x H): 600 x 300 x 150 mm Machine dimensions in mm (W x D x H): 1200 x 1970 x 1500 mm

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, MHS slicer with conveyor belt TYPE: PCE70E Year of manufacture: 2002 Cgjdpjzau E Hsfx Albou Chute length: 70 cm Chute width: 20 cm Shipping possible

Condition: excellent (used), Year of construction: 2017, For Sale ! 1) Autonobbing line with logistics conveyors and manual nobbing machine for rigor mortis fish – Peruza 2) Conveyors and packing system - Hermasa Year - 2017 Capacity - up to 200 fish /min. Type of fish - Sardine Cedjy Ukd Njpfx Albjgu

Condition: repair required (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: I - 02245, total length: 581 mm, total width: 776 mm, total height: 996 mm, overall weight: 145 kg, input voltage: 230 V, cooling capacity: 1.6 kW (2.18 HP), Flake ice maker with cleaning system, capacity approx. 250 kg flake ice in 24 hours. Suitable for operations with a high flake ice demand, such as butcher shops, bakeries, etc. Refrigerant: R 404 A - 1.5 kg. Shipment on pallet, costs to be borne by the buyer. Csdpfx Aloyybiasbegu

Condition: new, Year of construction: 2020, MEAT PROCESSING MACHINE ----- PRICE: €59,000 ----- Capacity: 120 liters Year of manufacture: 2020 Cutting head with 6 blades Touchscreen display + membrane controls Cjdpfx Aoxqq Nhslbjgu Container capacity: 120 l Operating voltage: 400/380 V/50 Hz Total machine power: 42.5 kW Variable blade speed: 40-5000 rpm Mixing speed (forward and reverse): 40-500 rpm Variable container speed: 5-18 rpm Weight with unloader: 1650 kg Manual unloader Advanced CutControl and CutVision software