Used fish processing machines for sale (63)

Condition: used, Year of construction: 2022, functionality: fully functional, We are offering this used Marel MS2612 pin bone remover (deboning) fish processing machine, manufactured in 2022, for sale. Hodpfx Aoz Efw Hsfueu Year of manufacture: 2022 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 x Tsunezawa Group automatic filleting machine that can be operated by 1 person. This is a specialised, high-efficiency filleting machine designed for salmon processing, specifically to remove the belly bones while producing a three-piece fillet (three-way filleting). Manufacturer - Tsunezawa Group Co., Ltd. Model - TAF-BG Filleting Machine. Date of manufacture – 2019. Throughput – 20 to 30 fish / minute, depending on fish size. Processing capability – can handle fresh salmon and thawed salmon down to -4C. Electrical requirements – 400 V / 50 hz / 3 phase. Power consumption – 3.45 kW. Overall dimensions - 2300mm long x 1550mm wide x 1800mm high. Hjdpfx Afoy Rimzouou Weight – 1,000 kg (approx.). Condition – Very good - last used for production in summer 2025. Supplied with User Manual and spare knives.

Condition: used, The set on offer is a complete MAREL SmartLine Grader weighing and sorting system in Dual Lane configuration, featuring two independent belts, each served by its own row of sorting output bins on the side of the machine, allowing for higher throughput than a single-lane configuration. The set additionally includes 2 infeed conveyors, model INF-PROL 031-02, 2 dynamic weighing stations (Dynamic Weighing Unit, model DWU, year 2014, range 250 g–6 kg), and 2 sorting stations (target batcher). The system is designed mainly for fish products but works well with most other food products too. How does the MAREL SmartLine Grader Dual Lane system work? Product is fed onto the line via two infeed conveyors, model INF-PROL 031-02, which deliver raw material to the weighing stations in a steady, controlled manner. Each of the two dynamic weighing stations (DWU) measures the weight of individual product pieces within a range of 250 g to 6 kg, passing the data to the control system. Based on the measured weight and programmed sorting criteria, the two sorting stations (target batcher) direct the product to the appropriate output bins, enabling precise batching to a target weight with minimal giveaway. The open, hygienic IP69K-rated construction allows for fast disassembly and pressure washdown, while an intuitive touchscreen panel provides ongoing monitoring and control of the sorting process. Key advantages of the MAREL SmartLine Grader Dual Lane system The Dual Lane configuration, with two independent belts and separate rows of sorting output bins, handles significantly higher production volumes than single-lane systems while maintaining high sorting precision. The doubled set of infeed conveyors, weighing stations, and sorting stations allows for two independent lines to run in parallel or for doubled throughput on a single process. The high weighing accuracy of the DWU stations minimizes product giveaway, translating directly into raw material savings across overall production. The hygienic, open-frame IP69K-rated construction, together with fast disassembly and reassembly, makes it easier to maintain the high cleanliness standards required in the food industry, while integration with MAREL software provides real-time production insight and batch traceability. Technical specifications of the MAREL SmartLine Grader Dual Lane system MAREL SmartLine Grader Dual Lane Manufacturer: MAREL (JBT Marel) Model: SmartLine Grader – Dual Lane configuration Number of lanes: 2 independent belts, each with its own row of sorting output bins Protection rating: IP69K Control panel: touchscreen, with real-time monitoring and reporting software Application: mainly fish products, also works well with most other food products Infeed conveyors (2x INFEED Conveyor) Model: INF-PROL 031-02 Quantity included: 2 units Dynamic weighing stations (2x DWU) Model: DWU (Dynamic Weighing Unit) Year of manufacture: 2014 Weighing range: 250 g – 6 kg Quantity included: 2 units Sorting stations (2x target batcher) Hjdpfxjz Haq Dj Afusu Quantity included: 2 units Application of the MAREL SmartLine Grader Dual Lane system

Condition: excellent (used), functionality: fully functional, Baader 603 Perforated drum, new price €11,900 Hedpfx Afjz Dvmieusu 3mm Like new condition Shipping possible

Condition: like new (used), HERMASA TUNIPACK-500 Automatic Packaging Machine The HERMASA TUNIPACK-500 is an automatic packaging machine designed for the automatic placement and packaging of products into containers within industrial food processing and preservation lines. Manufactured by HERMASA, a specialist in machinery for the canning industry, the TUNIPACK-500 is designed to automate the product loading and distribution phase into the container, reducing manual handling and providing a continuous and uniform process. Its industrial-grade construction in stainless steel, combined with the automatic feeding and control system, allows for integration into highly automated production lines. MAIN FEATURES -Manufacturer: HERMASA -Model: TUNIPACK-500 -Type: Automatic packaging machine -Automatic feeding and packaging system -Controlled product handling -Continuous industrial operation -Robust stainless steel construction -Integrated transport system -Control panel with HMI screen -Protections and safety systems -Designed to reduce manual handling -Integrable into existing canning lines -Hygienic construction for the food industry APPLICATION The HERMASA TUNIPACK-500 is designed to automate the packaging operation within an industrial canning line. The product is fed into the machine and managed automatically during the packaging process, facilitating its correct introduction and arrangement into the containers before continuing to the next stages of production. It can be integrated with: Product feeding systems Container conveyors Hjdpfx Aozw A Shofueu Product preparation equipment Dosers Can sealing machines Inspection systems Container washers Autoclaves and sterilization systems Labeling machines Complete automatic canning lines APPLICATIONS Particularly suitable for canning industries and fish processors looking to automate the packaging process and reduce manual operations on the production line. The HERMASA TUNIPACK-500 provides an industrial solution to achieve a continuous flow of product and facilitate its subsequent closing and processing. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, REF: MM6419 1 x Carnitech twin-lane pin-bone removing and packing line. This machine is designed for removing pin-bones ensure a high product quality and helps to achieve a maximum yield at shorter time. Head end first and skin side down, the salmon fillets are conveyed to the pin-bone head on a pvc belt. Carnitech pin-bone removers treat the fillets very gently. This system is suitable for processing both salmon and trout. Manufacturer - Carnitech A/S. Type - CT 2612. Pin-Boner Date of manufacture - 2000 (refurbished approx 2 years ago). Packing Line Date of manufacture - 2023/24. Hodpfx Afsy Swi Hjuou Capacity / Output - up to 36 fillets / minute (was only being run at 10 fillers / minute). Size of fillet - between 0.5 kg up to 4 kg. Video available on request.

Condition: used, Year of construction: 2002, functionality: fully functional, REF: MM6296 1 x Offshell Services Ltd twin-lane shellfish peeling machine with 2 x Podmores feeding hoppers. Technical specification ⚙️ ✅ Manufacturer – Offshell Services Ltd. ✅ Model – The Offshell Press MK V (Peeler). ✅ Date of manufacture - 2002. ✅ Configuration – Twin units mounted side-by-side. ✅ Construction – Stainless steel and aluminium frame. ✅ Power – 3-phase electric supply. ✅ Operation – Mechanical off-shell press for food processing applications. ✅ Condition – Used, average wear, complete with manual / electrical drawings. Decommissioned and packed for transport Hedpfx Ajxuhw Dofusu

Condition: good (used), Marel 6-Station Compact Grader – M2200 Marel automatic weighing, grading and batching system, ideal for meat, poultry, fish and other food products. Specification: * 6 grading stations * Marel M2200 digital control * Automatic dynamic weighing * Grades/batches by weight and/or piece count * Stainless-steel construction * 305 mm wide conveyor belt * Up to 3,000 g product weight * 230 V, 50–60 Hz Hodpfx Aoz Ehg Defuou * Pneumatic operation * Hygienic, washdown-friendly design A robust, compact grader suitable for automatically separating products into predetermined weight bands, reducing manual grading and improving portion consistency.

Condition: used, Year of construction: 2013, Twelve machines for food and meat processing are available, including four metal detectors, two derinding machines and one weigh-price labeler, one knife holder washing machine, one separator, one slicer, one meat band saw and one checkweigher. 1) Bizerba GS weigh-price labeler, version: automatic weighing instrument for individual weighing with price printing device. 2) Itec 22560-EL knife holder washing machine, year of manufacture: 2009, conveyor speed: approx. 2.6m/min, cleaning capacity: approx. 14knife holders/min, water tank volume: approx. 270l, max. cleaning water temperature: approx. 43°C, final rinse temperature: approx. 82°C. 3) 2 × Pulsotronic M-Pulse2 InFlex65 compact metal detectors, year of manufacture: 2013, suitable for metal detection in liquid and paste-like products, free product pipe diameter: approx. 57mm. 4) Pulsotronic M-Pulse 2 InFlex 65-3 metal detector, year of manufacture: 2018, suitable for filling machines as well as liquid and paste-like products, product pipe height: approx. 950mm-1250mm, free product pipe diameter: approx. 57mm. 5) Mettler Toledo Safeline metal detector. 6) Cri-Man SM300/50 separator for solid-liquid separation, design: screw press separator, screw speed: approx. 33rpm, screen opening: 0.5mm, throughput: approx. 37m³/h, machine weight: approx. 465kg. 7) Weber ASA 560 derinding machine, year of manufacture: 2003, working width: approx. 560mm. 8) Maja ESM/3550 derinding machine, year of manufacture: 2004, working width: approx. 554mm, cutting speed: approx. 22m/min, machine dimensions X/Y/Z: approx. 986mm/696mm/988mm, weight: approx. 170kg. 9) Bizerba VS 12 F slicer, blade diameter: 350mm, max. slice thickness: 24mm, max. round product diameter: approx. 270mm, max. rectangular product dimensions: approx. 315mm/245mm, blade speed: approx. 266rpm, machine dimensions X/Y/Z: approx. 860mm/770mm/480mm, weight: approx. 48kg. 10) Kolbe meat band saw. 11) Liebel LWS1400 checkweigher, weighing range: approx. 100g-6000g. An on-site inspection is possible. Hsdpfozwgiqox Afueu

Condition: used, Year of construction: 2014, Marel MS2730 Filleting Machine with Back Bone Trim High-performance automatic salmon filleting machine Available from August / September. This Marel MS2730 Filleting Machine is equipped with an automatic Back Bone Trim system, delivering excellent fillet yield and consistent product quality. The machine has been professionally maintained by Marel on an annual basis and is currently in good working condition. (Complete overhaul in 2018). Designed for medium to high-capacity fish processing operations, the MS2730 automatically adjusts to different fish sizes, ensuring maximum yield while reducing manual labor. Key Features - Automatic salmon filleting machine - Equipped with Back Bone Trim - High fillet yield and excellent cutting accuracy - Automatic adjustment to varying fish sizes - User-friendly touchscreen control - Hygienic stainless-steel construction - Easy access for cleaning and maintenance - Compact footprint - Annual maintenance carried out by Marel - Good working condition Technical Specifications - Manufacturer: Marel - Model: MS2730 - Capacity: Up to 25 fish per minute - Fish size: Approximately 1.5 – 8 kg - Power supply: 3 × 400 V + N + PE (50 Hz) - Power consumption: Approx. 5.5–7.0 kW (depending on configuration) - Water consumption: Approx. 15 L/min Hsdpszl Sydsfx Afueu - Compressed air: Approx. 230–250 L/min at 6–8 bar - Dimensions (L × W × H): Approx. 3,150 × 1,035 × 1,980 mm - Weight: Approx. 1,450 kg (configuration dependent) Condition The machine has been serviced annually by Marel and remains in good operational condition. It is still installed and can be inspected under power by appointment. Availability: August / September. For additional information, pricing, or to arrange an inspection, please contact us. * Manufacturer: Marel * Model: MS2730 * Fish size: Approximately1.5 – 8 kg * Power consumption: Approx.5.5–7.0 kW(depending on configuration) * Weight: Approx.1,450 kg(configuration dependent)

Condition: good (used), Compact coating line - batter dip, pre dust, batter enrober, crumber - all 400mm in to 350mm wide fryer. Has come from a small factory which was set up in 2020 and closed this week 25th March 2026. The factory was producing small products like pasta and chillies filled with cream cheese which was then coated and fried. Video to be added shortly. All other machinery also available including Vemag multi head filler and several blast freezers. Hodpfx Afsyxfmyjusu

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: PA12704, 110610702, PA12707, mobility: mobile, Badeer Fish Grading Machine – full documentation available in both Polish and English. The onboard computer operates on the MES - B'Logic software platform. It includes two modules: B'Logic Grading and a label design software B'Logic. The set includes: - CAB label printer - Feed hopper - Acceleration conveyor - Weighing machine - Sorting conveyor - PC computer The computer located next to the label printer at the machine is touchscreen. The main computer for setting product specifications (for the currently processed product) does not need to be positioned near the machine. Hjdpfx Aoy Hiyasfueu Specification: - 100–120 fish per minute - Maximum fish size: Length – 350 mm, Width – 220 mm - Operating speed adjustable by user (as shown in the video) - Airborne noise: < 70 dB Machine dimensions: Grading section: Height: 1.3 m, Length: 4.417 m, Width: 1.050 m Conveyor belt width: 60.8 cm (S 800 seamless belt) Power consumption: 0.37 kW Steel quality: AISI 304 Motor: Worm gear drive Feed hopper: Height: 1.87 m, Length: 3.66 m, Width: 1.5 m Conveyor belt width: 45.6 cm Drum motor Power consumption: 0.37 kW Dynamic weigher: Belt width: 250/350 mm Product weight: up to 1 kg (possible calibration) Motor power: 0.18 kW Speed: 0.25 mm/s – 2.0 mm/s

Condition: as good as new (ex-display), Year of construction: 2021, Direct from closed meat-free factory which opened in 2021. All machinery in near new condition and from 2021 and 2022. Very low running hours. Can be sold as whole line. Priced for end users only. New cost from GEA £1.66M Hsdpfxjyvav Nj Afuou

Condition: like new (used), RoteX Defroster for Fish Blocks Hodpfez Dkgdex Afusu Designed to improve thawing yield while minimising drip loss, the RoteX Classic Defroster uses an immersion thawing process to help maintain product quality throughout defrosting. Compared with traditional air-thawing methods, the system offers improved yield, reduced product loss and more consistent thawing performance. The immersion process can provide yield improvements of up to 5%, helping to maximise the usable weight and value of the product. With 3 x water boilers

Condition: excellent (used), Year of construction: 2013, We offer a used KROMA GUTMASTER 1200 mackerel gutting and injecting line from 2013. This industrial processing line is designed for the automatic gutting, cleaning, waste extraction, and brine injection of mackerel in fish processing plants. The machine is suitable for fish weighing 200–500 g and combines several operations in one continuous workflow. The fish is manually placed in special conveyor pockets, head-first and belly-up. As it moves through the line, the machine measures the fish and automatically adjusts the knives to its size. The system opens the belly, separates the gills, removes the entrails using the VACMASTER 200 vacuum system, cleans the inside of the fish, removes kidney blood, and then transfers the product to the brine injection section. The line is equipped with the BRINEMASTER automatic brining module, located directly after the cleaning section. A special injection head with 50 needles, each 2 mm in diameter, injects brine into the fish. After brining, the product is transported by conveyor to an inspection table or directly into containers. The KROMA GUTMASTER 1200 is made of acid-resistant materials and AISI 304 stainless steel, ensuring durability, hygiene, and resistance to demanding production environments. The machine is also equipped with CIP and CWS cleaning systems, helping to reduce cleaning time and improve sanitary working conditions. If there is no fish in a conveyor pocket, the working units are automatically deactivated, which reduces wear and energy consumption. Technical specifications: Manufacturer: KROMA Model: GUTMASTER 1200 Year of manufacture: 2013 Application: mackerel gutting, cleaning, and brine injection Fish size: 200–500 g Capacity without brine injection: up to 50 pcs/min Capacity with brine injection: up to 35 pcs/min Hedpszkizvofx Afusu Total power: 8 kW Control: microprocessor-based PLC Vacmaster 200: automatic vacuum gut-removal system Brinemaster: 50 needles, 2 mm diameter Outfeed conveyor: yes CWS cleaning system: yes CIP cleaning system: yes Basic spare parts kit: included in the price Operating staff: 2–3 people Weight: approx. 1000 kg Dimensions: 5100 / 6100 mm with conveyor x 600 x 1600 mm Main advantages: automatic gutting, cleaning, and brine injection in one line, high capacity of up to 50 fish/min without brining and up to 35 fish/min with brining, suitable for mackerel weighing 200–500 g, VACMASTER 200 vacuum system for entrail removal, BRINEMASTER brine injector with 50 needles, stainless steel and acid-resistant construction, CIP and CWS cleaning systems, PLC control, basic spare parts included in the machine price.

Condition: excellent (used), Year of construction: 2009, Salmon Slicer Horizontal / Long Slice Make: Marel Model: HS240 2009 Hodpfx Afezzdmbjusu

Condition: used, Fish fillet washer Make: Carnitech Model: 1635.20 Spray bars top and bottom Hjdpfxszzd Ewe Afusu

Condition: excellent (used), functionality: fully functional, The FDS 3000-1 Trio is an automatic fish skinning machine designed for the gentle skinning of soft, trimmed whitefish fillets and fish portions of uneven thickness. This brand’s machine has been used for years in fish processing plants around the world as a proven solution where high yield and minimal damage to the raw material are essential. Technical Specifications Manufacturer: TRIO Model: FDS 3000-1 Capacity: 40–120 fillets/min (depending on fillet size) Skinning depth: 0–10 mm Feeding method: manual Skinning method: freezing the fillet on a chilled drum; operates without stretching the skin or flesh Supported species: including hake, pollock, blue whiting, and whitefish of varying thicknesses How does the Trio FDS 3000-1 skinning machine work? Hodpfxszlhiho Afuju The operating principle of the FDS 3000-1 is based on a unique method of “freezing” the fillet on a chilled drum. The fillet is manually fed onto the surface of the rotating drum, where—thanks to the low temperature, the force of gravity, and light pressure—it is stabilized in a flat position without compressing or excessively straining the tissue. Only in this position does the knife remove the skin, leaving as much valuable meat as possible. This method allows for shallow, controlled skinning—with a cutting depth ranging from 0 to 10 mm—which results in less discoloration, fewer skin residues on the fillet, and higher end-product yield compared to the brand’s traditional, older models. Key Advantages of the Trio FDS 3000-1 The FDS 3000-1 skinner is particularly effective when the raw material is delicate or has uneven thickness—the gentle skinning method on a cold drum reduces the risk of fillet damage and preserves its structure even when processing thawed, previously frozen products. The machine’s capacity, ranging from 40 to 120 fillets per minute depending on the size of the raw material, allows the operating speed to be adjusted to the characteristics of a specific production line. The machine’s design ensures stable, consistent skinning quality regardless of the fillet’s shape and thickness, which reduces the need for manual adjustments and speeds up subsequent processing stages. The simple, manual method of feeding fillets means that operating the machine does not require extensive staff training. Applications and supported fish species The Trio FDS 3000-1 is used for skinning soft white fish fillets and portions of uneven thickness, including previously frozen and thawed raw material. The machine is well-suited for processing species such as hake, pollock, blue whiting, and other white fish that require gentle handling during processing. Thanks to its flexibility in skinning depth, the FDS 3000-1 is suitable both for producing fillets intended for further processing (e.g., breading, freezing, smoking) and for production lines focused on maximizing the yield of high-value raw material. At BMG Trade, we specialize in the sale of machinery for the food industry, including professional fish-processing equipment such as Trio skinning machines. If you are looking for a Trio FDS 3000-1 skinning machine—whether new or a proven, used machine in good working condition—please contact us. We will help you select the right model for your product range and production scale, and we will also advise you on transportation, service, and commissioning the machine at your facility. Contact us to find out about current availability and pricing for the Trio FDS 3000-1.

Condition: excellent (used), Year of construction: 2022, operating hours: 5,098 h, Baader 581 Pro Filleting Machine The BAADER 581 Pro is one of the latest innovations in the filleting section from BAADER. It represents probably the most powerful and advanced filleting machine in the world. These in-depth studies resulted in the development of the BAADER 581 Pro’s most innovative optional feature: the dynamic back knife. The optional dynamic back knife offers outstanding possibilities for increasing the yield of the fillet and makes BAADER 581 Pro a yield winner. Depending on the fish's anatomy, the knives are automatically adapting to the upper back area of every single salmonid leaving as little flesh on the frame as a hand filleter would. Very narrow in the tail section but opening up to the wider backbones in the neck area. The result changes the common understanding of yield expectations for machine filleting. The new layout of the BAADER 581 Pro has a 20% smaller footprint compared to its predecessor by streamlining the housing. The recently designed housing also reduces processing noise for a quieter production atmosphere. It features individual fish measurement, offering operational flexibility for a wide range of fish species and different kinds of conditions. High flexibility to different species and conditions Adaptable recipe management system allows for changes during operation Individual fish measurement High operational flexibility for different fish species and conditions Optimal fillet quality Computer controlled active cutting tools Smooth surface as a result of reduced fillet stress during processing No gaping Working range without belly trim (approx.):  Salmon (HoG): 2 - 7 kg Sea Trout (HoG) : 1.8 - 5 kg Sea Trout (HoG): 1.- 4 kg * Working range with belly trim (approx.):  Salmon (HoG): 2 - 5.5 kg Sea Trout (HoG) : 1.8 - 5 kg Sea Trout (HoG): 1.- 4 kg * Other species on request, like: Wild caught coho (H&G): 2 - 4 kg Wild caught sockeye (H&G): 2 - 4 kg Hsdpszktd Isfx Afueu Manufacturer: Baader Model: 581 Pro Year: 2022 Production hours: 5.098 hours Capacity: Up to 25 fish/min. Species: Salmon / Coho / Sockeye / Trout / Tuna / Similar Power: 400V / 50Hz / 13kW Air: 6 bar / 50l/min. Machine dimensions LxWxH: 5.566x2.795x2.523 mm Machine weight: 3.200 kg.

Condition: used, Year of construction: 2012, Trio FDS3000 skinner for up to 150 cod fillets a minute. 460mm wide conveyor. Hodpszawqrsfx Afueu

Condition: good (used), Year of construction: 2011, Fish Skinning Machine Make: Nock Model: TFE350 Hsdpoycklzofx Afusu 2011 Refrigerated drum, with built in compressor With various spares

Condition: like new (used), VMK Automatic Heading Machine for Pelagic Fish VMK industrial heading machine for pelagic fish, designed to automate the cutting and removal of fish heads within industrial processing lines for seafood products. The equipment allows for the continuous performance of feeding, positioning, and heading operations, reducing manual handling and facilitating a uniform flow towards subsequent processing stages. Its industrial construction, primarily in stainless steel, is specifically designed for operation in humid and demanding environments typical of fish processing plants. MAIN FEATURES -Manufacturer: VMK -Type: Automatic fish heading machine -Application: Pelagic fish -Function: Cutting and removal of the head -Controlled feeding and positioning of the fish -Automatic and continuous processing -Integrated transport system -Multiple feeding channels -Construction primarily in stainless steel -Hygienic design for the food industry -Robust construction for industrial use -Accessibility for cleaning and maintenance -Integrable into existing fish processing lines -Suitable for continuous operation in seafood processing plants APPLICATION The VMK heading machine is designed to be integrated into the preparation area of an industrial processing line for pelagic fish. The fish is fed and guided in a controlled manner towards the cutting area, where the heading operation is performed automatically. Subsequently, the product can continue to the next preparation or processing stages. It can be integrated with: Fish feeding systems Conveyors Sorting and grading machines Cutting and evisceration equipment Filleting machines Fish washers Inspection tables and belts Freezing systems Packaging equipment Hodsyuffyepfx Afueu Complete fish processing lines APPLICATIONS Particularly suitable for canning industries, fish processing plants, and companies specializing in seafood products that need to automate the preparation of pelagic species. It can be used as part of lines designed for the processing of sardines, mackerel, and other species of pelagic fish, depending on the format, product dimensions, and installed configuration. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), Year of construction: 2008, Fish Skinning Machine Hjdpfx Aow Sx Ezjfusu Make: Steen Model: ST600 Built 2008 Serviced and maintained

Condition: new, Year of construction: 2021, Marel MS2610 Pinbone Remover High-quality pinboning The MS 2610 Pinbone Remover is a lighter version of our well-known standard pinboner, the MS 2612. It is designed according to the same principles, ensuring high-quality pinbone removal, and it can operate at the same speed as the MS 2612 to deliver maximum capacity. Manual adjustments Three pre-set speeds are available, allowing the pinbone roller to adapt to the varying condition of the fish. The pressure of the pinbone heads can be easily adjusted using a weight bar. The MS 2610 is available as a single-lane and dual-lane machine. Fast and accurate The MS 2610’s unique combination of accuracy and speed results in high yield and output, with the best pinboning quality often achieved at a belt speed of 4-5 m/min. Up to 18 fillets per minute, per lane Three pre-set speeds for the pinbone roller Quick-release system on conveyors Manufacturer: Marel Model: MS2610.10 Year: 2021 (new) Production hours: 0 Capacity: Up to 18 fillets/minute * Hedpfxoz Arimj Afuju Power: 0.4kW Machine dimensions L x W x H: 1,650 x 710 x 1,900 mm Machine weight: 180 kg.

Condition: excellent (used), Year of construction: 2016, Fish / Sardine procesing line SIA "PERUZA " Type of fish - Sardine Hodpezhibksfx Afusu Fish length - 140/180 mm Fish per kg - 44/27 # Fish condition Fresh; defrosted (not recommended) Equipment characteristics Productivity (for one autonobbing head) - Up to 200 fish/minute Connections -Electricity Voltage - 400 V Phase - count 3 - Frequency - 50/60 Hz Power (for one autonobbing line) - 8 kW Power (for one vacuum system) - 7.5 kW Power (for Nobbing machine for rigor mortis fish) - 0.75 kW Power (for logistic conveyour system) -5 kW Water Pressure >3 bar Other data : Humidity resistance IP 65 - Materials used - Stainless steel AISI 304, AISI 316, Plastic ERTALON 6SA, POLYURETHAN, PE HD 500 Environment - Indoors (temp. +10....+35 -