Gea ahlborn for sale
Make GEA Westfalia Separator AG, Type SCA 220-02-33, No 8001 242, New 1998, Material Stainless steel, Decanter "Three phase twin drive decanter" (1x), 3-Phase decanter , Screw diameter 220/125mm, Motor 4,0 KW + 15,0 KW, 380 Volt, With variable speed drive (2x frequency inverter), Max. rotor speed 2700-5500 Rpm, Mounted on frame , With switchgear , Floorspace 2,4x2,4 M, Total height 2,3 M, Weight 2800 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced p... more
|
3fach komb. with slot boring machine
used, good condition
manufactured by Casadei-GEA
type FS-51
built in 1984
Masch.-No. 84-50-151
motor 5,5 kW
planing width ca. 510 mm
planing height ca. 250 mm
table length ca. 2200 mm
protection device
surfacing table lip plates slotted
surfacing table lip plates low noise
automatic brake
number of cutters 4 piece
cutter system
safety cutter spindle v-ledge
Bfxeighns7
table-sliding rolls 1 piece
feeder 2 Stufen
electrical height adjustment Handwheel fine a... more
|
Capacity: 65litres
Agitator: 7,5kw / 40-400 rpm
Lump breaker: 2kw / 1500-3000 rpm
3x400V 50Hz 10kW / air : 6bars-10Nm3/h / water CIP : 3bars-3 m3/h
Itud2iv2
The automate and control panel has been replaced by GEA in 2009 (Siemens S7-300, touch screen and supervision under WinnCC) more
|
Heating with hot water and heat exchanger. Air filter and Verteilkä nä le.
Type I engine number 918005 0720.25.20
7h7flavyx more
|
Make Niro A/S Copenhagen, Type VFI / Ex Gr. 8, No 112183, New onbekend, Material Stainless steel, Continuous fluidbed dryer (1x), Surface 8,0 m2, Bed sizes 1200x6600mm, Product inlet dia. 300mm, Product outlet dia. 300mm, Air inlet 2x dia. 450mm, Air outlet dia. 500mm, Motor 1,9 KW, 380/660 Volt (Ex), With fan (2x), Fabr. B. Bille, HT 55-550 en HT 35-530, Heating unit (steam) , Floorspace 7,5x1,8 M, Total height 3,0 M What you can expect from Foeth: all our machines are in working condition, and... more
|
Material Stainless steel 1.4301 (304), Stainless steel 1.4541 (321), Falling film evaporator "Single-effect cont. vacuum falling-film"(1x), Capacity 950 / 1400 KG/Hr, Nunmber of stages: 1, Condensor: , Make GEA/Wiegand, New 1989, Extra Specifications - Used on edible oil with methyl ester of fatty acids C16/C18 (FAME). - Application 1: evaporation capacity 950 KG/Hr FAME, Feed: quantity 2000KG /Hr, Temperature 80 Degr. C., Concentration 50% edible oil Concentrate: quantity 1050 KG/Hr, Temperatur... more
|
Make GEA Niro Soavi Spa (IT), Type NS1001L 2K, No 4404, New 2001, Material Stainless steel, Piston homogeniser , Capacity 10 Ltr/H, Pressure 1500 Bar, Twin stage , Number of pistons: 1, Piston diameter dia.10mm, Motor 1,0 KW, With switch , Floorspace 0,7x0,5 M, Total height 0,4 M, Weight 140 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our ... more
|
Make Gea Ecoflex gmbh, Type VT40 CDS-10, No "unknow, manuctering tag is missing", Material Mild steel, Plate material Stainless steel, Platen heatexchanger , Heating surface 35m2, Capacity 70 Ltr, Number of platens 78, Platen sizes 0,46 m2, Connections 4x +/- dia.130mm, Working pressure +/- 10 bar, Max. temperature +/- 115 [...] Floorspace 1,6x0,9 M, Total height 0,6 M, Weight 720 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new... more
|
Make GEA/Wiegand, No 373/30339/89-8, New 1989, Shell material Stainless steel, Cover material Stainless steel 1.4571 (316Ti), Tube material Stainless steel, Heat exchanger (1x), Heating surface 3,5 M2, Tube capacity 30 Ltr, Number of tubes: 18, Tube diameter 22mm, Tube length 3000mm, Working pressure tubes 6 bar, Max. temperature 80 Degr. C., Shell capacity 80 Ltr, Working pressure shell vac/0,5 bar, Max. temperature 200 Degr. C., Shell connections 2x dia. 50mm + dia. 80mm, Cover connections 2x ... more
|
Type VT04 CDL-S-16, No 177/12126, New 2003, Material Stainless steel 1.4541 (321), Platen heatexchanger (1x), make GEA Ecoflex GmbH Sarstedt, Heating surface 6,8 m2, Capacity 6,36/6,60 Ltr, Number of platens 10+21+41+31= 103x, Platen sizes 120x550mm, Working pressure 10 bar, Test pressure 13 bar, Max. temperature 150 Degr. C., Mounted on frame , Floorspace 1,0x0,5 M, Total height 1,2 M What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to n... more
|
|
Make GEA Ecoflex GmbH Sarstedt, Type VT-40 B-6, No 171/21131, New 2007, Material Stainless steel 1.4404 (316L), Platen heatexchanger , Heating surface 86 m2, Capacity 2x 178,6 Ltr, Number of platens 189, Connections (4x) dia.100mm, Working pressure 8 bar, Test pressure 10,4 bar, Max. temperature 160 [...] Floorspace 2,2x0,8 M, Total height 1,9 M, Weight 1197 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for sh... more
|
Make GEA Ahlborn GmbH&Co Sarstedt, Type NT-250 S B-10, No 140/10838, New 2007, Material Stainless steel (Sandvik 254 SMO), Platen heatexchanger , Heating surface 79,9 m2, Capacity 2x 151,8 Ltr, Number of platens 87, Connections (4x) dia.250mm, Working pressure 6 bar, Test pressure 7,8 bar, Max. temperature 60 [...] Floorspace 1,6x0,9 M, Total height 2,3 M, Weight 2322 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are re... more
|
Make GEA Westfalia Separator AG, Type OSC-4-91-006, No 1718823, New 1998, In a very good (like new) condition, Material Stainless steel, Separator "Self cleaning disk separator" (1x), Motor 3,0 KW, 400/690 Volt, Max. rotor speed 9980 Rpm, Floorspace 0,9x0,4 M, Total height 0,8 M, Weight 300 KG, Extra Specifications - With tools and many spare parts What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any... more
|
Make GEA Ecoflex GmbH Sarstedt, Type NT-250 S B-10, No 140/10840, New 2007, Material Stainless steel (Sandvik 254 SMO), Platen heatexchanger , Heating surface 79,9 m2, Capacity 2x 151,8 Ltr, Number of platens 87, Connections 4x dia.250mm, Working pressure 6 bar, Test pressure 7,8 bar, Max. temperature 60 [...] Floorspace 1,6x0,9 M, Total height 2,3 M, Weight 2322 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready f... more
|
Make GEA Ecoflex GmbH Sarstedt, Type NT-250 S B-10, No 140/10839, New 2007, Material Stainless steel (Sandvik 254 SMO), Platen heatexchanger , Heating surface 79,9 m2, Capacity 2x 151,8 Ltr, Number of platens 87, Connections (4x) dia.250mm, Working pressure 6 bar, Test pressure 7,8 bar, Max. temperature 60 Degr.C, Floorspace 1,6x0,9 M, Total height 2,3 M, Weight 2322 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are rea... more
|
Make GEA Ecoflex gmbh, Type VT40 B-6, No 171/21130, New 2007, Material Stainless steel, Plate material Stainless steel 2.4605 (Alloy 59), Platen heatexchanger , Heating surface 76,8 m2, Capacity 157,6 Ltr, Number of platens 169, Connections dia.110mm, Working pressure 8,0 bar, Test pressure 10,4 bar, Max. temperature 160 [...] Floorspace 2,7x1,9 M, Total height 1,9 M , Weight 1300 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new... more
|
Material Stainless steel, Spray dryer "Rotary atomiser" (1x) make GEA Niro A/S, Atomiser dia. 100mm/120mm, Motor 1,5 KW (Ex), Evaporation capacity 50-100 KG/Hr, Floorspace 0,3x0,3 M, Total height 0,5 M, Weight 20 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Visit our website Foeth for more informa... more
|
Material Stainless steel, Piston homogeniser , Capacity 1180 Ltr/Hr, Pressure 125 Bar, Number of pistons: 3, Piston stroke 60mm, Motor 11,0 KW, 400/690 Volt, Floorspace 1,5x1,2 M, Total height 1,4 M, Weight 1000 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Visit our website Foeth for more informat... more
|
Make GEA Aeromatic-Fielder UK, Type TSG-2-B5-F4, Spray arm/nozzle is missing, No 869500, New 1998, Material Stainless steel, Material finish undefined, Fluidbeddryer (1x), With pan mounted on wheels , Pan equipped with "non-sifting Gill plate", Capacity 47 Ltr, Pan sizes dia. 460x500mm, Can be heated by steam , With fan make Meidinger, type HA-100-M3/825, Capacity 360 m3/Hr, Motor 3,0 KW, 400/690 Volt (IP55), With dust filter , With switchgear , Floorspace dryer 1,2x0,9 M, Total height 3,1 M, We... more
|
Make Eduard Ahlborn, No 3004 + 3008, New 1968, Material Stainless steel 1.4541 (321), Reactor (2x), Capacity 500 Ltr., Vessel sizes 1080x650 mm, Working pressure 3,2 Bar, Max. temperature 145 C°, Mounted on legs , With switchgear , Floorspace 1.7x1.5 M, Total height 1.9 M, Weight 675 Kg, Extra Specifications With rotor/stator stirrer make Krieger, motor 4,7/5,7 kw, 380 volt, 1440/2880 rpm. What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared ... more
|
Make NIRO A/S, Type CSS ZIG-ZAG 300mm, No 080-0104-00, New 1996, Material Stainless steel, Zig-Zag tumbler mixer , Inlet Dia. 160mm / 300 x 185mm, Outlet Dia. 195mm, With motor , With safety gates , Floorspace 2,4 x 1,2 M, Total height 1,6 KG, Weight 860 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands... more
|
Make NIRO A/S, Type CSS ZIG-ZAG 300mm, No 080-0101-00, New 1995, Zig-Zag tumbler mixer , Inlet 300 X 185mm, Outlet Dia. 240mm, With motor 1,35 KW, 400/690 Volt (Ex), Speed mixer 26 Rpm, With safety gates , Floorspace 2,4 x 1,2 M, Total height 1,6 M, Weight 920 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Nethe... more
|
Langenfeld (Rheinland), Germany
![]()
6397 km
1994
excellent (used)
Bandsaw GEA BS740 with 740mm roller diameter, motor brake and Panhans APA-guides
Drive motor 3kW with automatic motor brake
table approx. 995 x 705mm
massive width stop
blade tension indicator
Cutting height max. 480mm
Cutting width max. 720mm
Panhan's APA guides top and bottom
saw blade length approx. 5400mm
several saw blades, many are still sharp
Suction nozzle 95 and 120mm
Cfjoioeyq
Machine is partially repainted.
Dimensions approx. 1250 x 800 x 2400mm (LxWxH). Weight approx. 450kg.
Please... more
|
liter capacity 18 l
total power requirement 2x25,1 kW
weight of the machine ca. t
dimensions of the machine ca. m
Cakishh0 more
|
Engine power: 7.5 PS/HP (5.5 kW), Year of construction: 1989, Milling machine: clockwise and counterclockwise rotation, Milling spindle Ø: 30 mm, Weight (kg): 500 kg, Milling stop: Yes, Current machine location: SOLTAU, Speeds: 2900/4400/6000/8000/10000 rpm, Rigid spindle, Cast iron table: 1100x900 mm, Self-made curved milling hood
Cyzpfzeo more
|
all stainless steel
belt width 600 mm
to form meat balls from 6 to ± 80 gr
suitable to put in line with a forming machine (VM 400)
adjustable speed
mobile
Bgnpbpk9jl
dimensions (l x w x h) : ± 1.300 x 700 x 1.500 mm more
|
Diameter: 458/245
Bespgcrwoy
Drum speed: 3.000 U/min
Solid density 2,0 t/cbm
New beared
Incl. control cabinet more
|
Kirchlengern, Germany
![]()
dealership location
6457 km
used
Another 37 days
Slicer and packaging line, manufacturer: GEA (Nr. 1, original price: 850.000,00 €), consisting of: 1 slicer, manufacturer: GEA, type: Mega Slicer, year of construction: 2015, serial no.: 4044622995, one Touch Control Panel, 1 Check Ware, Manufacturer: GEA, Type: Check 4000, Year of manufacture: 2015, Serial no. 4040920901, 1 rocker, 1 inserter/overlapper/plant order, Manufacturer: GEA, Type: Formatter, Year of manufacture: 2015, Serial no.: 4049920902, 1 infeed conveyor, Manufacturer: GEA, Type:... more
|
spindle tilting: Nein
height adjustment: Handrad
tilting adjustment: -
fence adjustment: manuell
height indicator: -
Yubu8r3i
tilting indicator: -
fence indicator: -
spindle diameter: 30 mm
speeds: 4000, 6000, 8000, 10000
motor power: 4 kW
motorbrake: Ja, FuÃbremse
suction connection: 120mm
machine length: 1000mm
machine wide: 1000mm
weight: 700kg more
|
|
suitable for thermal oil heating
9 kW
with lower and upper belt
with Teflon infeed belt 1.200 mm
extra product infeed belt
outfeed belt
suitable for fire protection
suitable for CIP-cleaning
frying length 3.000 mm
belt width 700 mm
adjustable speed
oil circulation pump
oil level control
sediment removal system
filter
Cbjdqdoz3
lifting unit with hoists
dimensions (l x w x h) : ± 6.850 mm x 2.000 x 3.400 mm more
|
steel grade 1.4571
length of the tubes: 3.000 mm
3 segments mit 4 tubes each
interior diameter of the tubes 67,5 mm
each tube has got 7 inner tubes with diameter of 15,5 mm
height 2.000 mm
width 200 mm
Bfvn3kxbep
total length 3.300 mm
connections DN 50
steam heated more
|
Tauberbischofsheim, Germany
![]()
6640 km
2001
excellent (used)
GEA DIESSEL Karbonisieren machine type DCIAR
continuous mixers DICON water degassing type DIOX 2
Performance 35,000 litres / h
0mdoqw9l
Control Siemens S 7-400 more
|
Kirchlengern, Germany
![]()
dealership location
6457 km
used
Another 37 days
Slicer and packaging line, manufacturer: GEA (No. 6, original price: 940.000,00 €), consisting of: 1 slicer, manufacturer: GEA, type: Mega Slicer, year of construction: 2015, serial no.: 4044622951, 1 Check Ware, Manufacturer: GEA, Type: Check 4000, 1 rocker, 1 inserter/overlapper/works order, Manufacturer: GEA, 1 insertion conveyor, Manufacturer: GEA, Type: Shingel Loader 100, 1 touch control panel, 1 packaging machine, Manufacturer: GEA, Typ: Power Pak, 1 touch control panel, 1 2-fold labellin... more
|
Manufacturer: GEA Westfalia
Model: CNB 130
Capacity: 15,000 l/h
YOM: 1991
J877wzpf
Umdrehungen: 4500
S/N: 1700332
Tools are included more
|
Vertical insulated silos tank for powder-sugar. Used for sugar in Dairy plant.
Nopjn
'Capacity 100 m3.
Complete Stainless Steel with conical bottom. Connected with vibrations and pump equipment.
At side connected with insulated smaller tank with dosage equipment. more
|
battering machine :
Type WTC 600
all stainless steel
belt width 600 mm
mobile
mesh width 5 mm
adjustable speed
with air knives
with batter pump
outside dimensions (l x w x h) : ± 1400 x 900 x 1700 mm
all new motors
all new electrical contacts
Sthdpo
all new cables
all new bearings
new mesh wire belt
+
“GEA-CFS” breader
Type PR 600
all stainless steel
suitable for standard crumbs
belt width 600 mm
adjustable speed
adjustable working height
mobile
with air knives
outside dimensions (l x w x h... more
|
Hot air tunnel / cooking machine / frying line / hot air oven / Formcook / Flowcook (GEA, Koppens, CFS, Stork, MEYN)
- Conveyor width: 1000 mm
- Cooking length: approx. 4,5 m
- Heated thermal oil
- New fire extinguisher installed
More machines on : w w w . s p r e m a t e c . d e
No3f7 more
|
Max. drum rotational speed: 3400/min, output: 5-35m³/h, machine is as good as new, drum and control cabinet are still packaged.
Pt2htq more
|
Second-hand mixer/ granulator GEA Collette GRAL 75 disigned for wet granulation process with double jacket
CE, GMP and FDA conform.
Year: 2000
Volume: 75 L
Mixing volume: 25-50 L
Spannung: 380/220 V, 50 Hz
Ln9lf
Mixer: 3 inclined blades, cetral located, mixing speed continuously adjustable 30-305 rpm, material 14404 resp. electropolished.
Chopper: two downward knives, eccentric, protrudes from the top of the container, 1460/2870 rpm electropolished,
Container is equipped with light.
Double... more
|
Gerolzhofen, Germany
![]()
dealership location
6672 km
used
used
manufactured by Gea
3icbrxebe
type Kapre
single-sided from bottom
pressing cylinder 6
heating rails 2 piece
working length 2400 mm
pneumatic
moveable
required space ca. l x w x h mm
2900 x 700 x 1100
located in 97447 Gerolzhofen
sale in current condition as seen
- free on truck - more
|
net belt width ± 600 mm
suitable for thermic oil heating (= 900 kW)
Fwz88z7
2 x 8 tiers
belt length: ± 113 m
product height: ± 95 mm
cooking time min/max : 5,3-159 min
belt speed: 21,3-0,75 m/min
infeed height: ± 1000 mm
outfeed height: ± 1.000 mm
max. temperature: 200°C
hygrometer
steam: 4-8 Bar, 600 kg/hr
water 3 Bar, 500 l/hr
air pressure : 8 Bar
exhaust: Ø 250 mm, 2000 m³/hr
3 x 400V, 50 Hz, 64kW
overall dimensions (l x w x h) : ± 9.200 x 3.940 x 6.000 mm
suitable for CIP-cleaning
touch scre... more
|
Teflon roasting / roasting line / CFS - Koppens - GEA - NOT Formcook / TWIN GRILL
Bfo0djfcn2
- Year of manufacture: 2003
- Heated thermal oil
- New fire extinguisher installed
- Width: 600 mm
More machines on: w w w . s p r e m a t e c . d e more
|
heavy banda
GEA BS 840
Description:
Engine 5.5KW with brake
Roll diameter 840mm
Belt length max. 6050mm
Cutting height 620mm
Cutting width 820mm
Table size 820x1160mm
Attack on table
Table top swivelling
Suction nozzle
Bfkkpysb29
1x120mm
1x140mm
Dimensions 1425x1000x2650mm lxbxh
Weight 730KG more
|
Description: Spiral heat exchanger with clamping device. Screw and spiral straps made of stainless steel. Stand feet and lid made of steel
Type: SL2
Manufacturer: GEA Canzler GmbH
Built: 2000
Documentation: yes
Visit: yes
Warehouse: Lager Warburg
Status: used - good
Content: 310 l (chamber A)
Content: 310 l (chamber B)
Material: Stainless steel (1.4404 (spiral tapes))
Connections: 4x DN50 (entrance / exit)
Connections: 2x DN25 (emptying)
8ddejltp2
Pressure: 6 bar (max.)
Temperature... more
|
A-5080-Pneumatic Valves
Diverse pneumatic valves, about 300 pieces. Most of them has not been used!
Nbdct
Very nice condition! For more information please contact us! more
|
Type: CKH600/16/100
Serial number: 495
Year of construction: 2010
Belt width: 600 mm
Belt length: 113 m nett
Tiers: 2 x 8 pcs.
Product gap: 95 mm
Model: Left hand turning
Heating: thermal oil, 900 kW
Cooking time: 5.3 - 159 min.
Max air temperature: 200°C
Be3sunvuuc
Infeed height: 1000 mm
Outfeed height: 1000 mm
Steam: 4 - 8 Bar, 600 kg/hr
Water: 3 Bar, 500 l/hr
Air: 8 Bar
Exhaust: Ø 250 mm, 2000 m³/hr
Power: 3 x 400V, 50Hz, 64kW
Dimensions: 9200 x 3940 x 6000 mm (open postion)
Weight: 22000 kg ... more
|
all stainless steel
suitable for thermal oil heating: ± 200 kW
connection : 2 x 4 x 70 mm²
infeed height : 925 mm
outfeed height : 950 mm
frying time min/max : 25-250 sec
throughput speed min/max : 1,44 – 14,4 m/min
min. oil volume at oil level of 2cm above the belt : 1.100L
max. oil level above the belt : 120 mm
setting overheating protection : 220°C
suitable for fire protection
with top hold down belt
isolated canopy
infeed belt
oil circulation system
net belt length 6.000 mm
Bho72rgnw
net bel... more
|
|