Used Gears for sale (7,537)

Condition: like new (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 25582, Equipped with: Fanuc 30ia Control Hydraulic System Coolant System Chip Conveyor Pneumatics Lube System Jib Crane Change Gears Mist Collector Transformer Work Light Stack Light Specifications: Extreme Ratio: 10:1 Root Angle Range (B-Axis): -5 deg. TO 90 deg. Equivalent Root Angle Range: -8 deg. to 90 deg. (Equivalent refers to cradle type machine.) Face Hobbing: Examples of Maximum Gear Pitch Diameter -35 Degree Spiral -152 mm TRI-AC Cutter w/13 Blade Groups Max. Full Depth: 0.550" Max. Face Width: 1.6" Face Milling: Examples of Maximum Gear Pitch Diameter -35 Degree Spiral -7.5" Diameter Cutter Max. Full Depth: 0.625" Max. Face Width: 1.6" Max. Swinging Base Travel (B-Axis): -5 deg. to 90 deg. Max. Vertical Travel (Y-Axis): -4" to 7" Max. Horizontal Travel (X-Axis): -6" to 4" Sliding Base Travel (Z-Axis): 2" to 12" Machine Center to Work Spindle Face (Fixed): 4.5" Tooth Number: 5 to 200 Inclusive Cutting Diameters: Conventional Face Milling: 1.1" to 7.5" Helixact: 100mm to 200mm Fine Pitch: 102mm to 152mm Coarse Pitch: 152mm only Speeds: B-Axis--Swinging Base (Degrees per Second): 30deg./sec. A-Axis--Work Spindle (Face Milling)(RPM): 0-75 A-Axis--Work Spindle (Face Hobbing)(RPM): 0-375 C-Axis--Cutter Spindle (RPM): 30-500 X-Axis--Horizontal (Inches per Second): 4.92"/sec. Y-Axis--Vertical (Inches per Second): 4.92" Z-Axis--Sliding Base (Inches per Second): 4.92"/sec. Work Spindle: Diameter of Taper at Large End (#39 Taper): 3-29/32" Taper per Foot: 39/64" Depth of Taper: 3" Floor Space: 95.75" x 63.5" Gjdpfx Alezn Aymj Uokc Height (less mist collector): 90.75" Approx. Weight: 22,000 lbs

Condition: used, Year of construction: 1959, total height: 1,900 mm, total width: 2,200 mm, total length: 1,500 mm, Colour: Blue Empty weight: 2.500 kg Price: On request Gsdpfx Aezkui Ssl Uekc - Year: 1959 - Documentation available: Yes - Serial number: 80 - Drive system: Conventional - Power [kW]: 5.0 - Transport dimensions: 1500mm x 2200mm x 1900mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1970, max. wheel diameter 1600 mm gear width 660 mm max. module 16/18 number of milling spindle turning speeds 18 number of feeds 18 Gjdpfxsz Rqnvs Al Uskc total power requirement 12 kW weight of the machine ca. 20 t

Condition: good (used), Year of construction: 2011, functionality: fully functional, Max. diameter = 450 mm and module = 10 Min. diameter = 69 mm and module = 0.9 Gjdpfoz Rm Hzsx Al Uekc

Condition: excellent (used), Year of construction: 1983, Table diameter: 630mm Gkodpfx Asz Rvt Del Ujc Max. working diameter: 800mm Max. module: 10 Year of manufacture: 1983

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Gksdoxdfa Uspfx Al Uec Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Gkodpfxortryks Al Usc Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: used, functionality: fully functional, LIEBHERR Gear Hobbing Machine - Max. Module 20 / Max. Diameter 1800mm The machine is in good operational condition and is complete with comprehensive peripheral equipment. It is sold including change gears (dişli takımları), hob arbors/mandrels (malafalar), and original technical manuals/documentation (kitaplar). • Available for immediate inspection under power. • Transport and dismantling can be arranged upon request. Technical Specifications • Manufacturer: LIEBHERR • Type of Machine: Vertical Gear Hobbing Machine • Max. Machinable Module: 20 mm • Max. Workpiece Diameter (with Counter Support/Steady Column): 1250 mm • Max. Workpiece Diameter (without Counter Support): 1800 mm • Workpiece Table Bore Diameter: 300 mm • Workpiece Bore Taper Diameter: 60 mm • Workpiece Table Taper: Morse Taper 10 (MK 10) • Max. Cutter (Hob) Diameter: • Standard Hobbing Head: 250 mm Godpfx Aez Ipadel Uskc • Universal Hobbing Head (Type 2529): 300 mm • Tangential Hobbing Head (Slot Φ): 300 mm • Max. Cutter (Hob) Length: 340 mm • Hob Arbor Diameter Options (60-70-80): • Included Machine Accessory: 40 mm • On Request / Optional: 32 mm, 50 mm, 60 mm etc. • Cutter Spindle Taper: Morse Taper 10 (MK 10) • Center Distance between Cutter and Workpiece Axes: • Standard Hobbing Head: Min. 245 mm / Max. 1260 mm • Tangential Hobbing Head: Min. 185 mm / Max. 1200 mm • Universal Hobbing Head (Type 2529): Min. 160 mm / Max. 1175 mm • Machine Dimensions (LxWxH): 6500 x 3900 x 3300 mm

Condition: used, Year of construction: 1990, total height: 2,000 mm, total width: 1,300 mm, total length: 5,900 mm, Colour: Green Empty weight: 7.500 kg Center-height: 250mm Table-length: 2300mm Travel grinding-spindel: 200mm Gear diameter: 300 mm Module range: 0.5 mm – 8 mm Helix angle: ±35° Max. workpiece weight: 100 kg - Year: 1990 - Documentation available: No - CE certificate present: No - Serial number: 018.0402 - Drive system: CNC - Control system brand: Optronic - Control system type: CNC D140 - Horizontal/vertical: Horizontal - Model: Gear hobbing machine - Min. module [mm]: 0.5 - Max. module [mm]: 8 - Max. workpiece width [mm]: 2300 - Max. workpiece height [mm]: 500 - Max. workpiece weight [kg]: 100 - Table length [mm]: 2300 - Transport dimensions: 5900mm x 1300mm x 2000mm (l x w x h) - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Gedpfx Aszy E Tasl Uokc

Condition: good (used), Year of construction: 1987, functionality: fully functional, overall weight: 1,900 kg, total length: 1,690 mm, total width: 1,260 mm, total height: 815 mm, gear ratio: 200, torque: 65,000 Nm, shaft diameter: 200 mm, 2 units of 4-stage industrial gearboxes used in winch applications. Manufacturer: Asug Penig, GDR Type: TGL 34611/10A8-450x200 Year of manufacture: 1987 Maximum torque: 65000 Nm Gear ratio: 200:1 Actual gear ratio: 200.364 Power: n1 950 rpm = 33 kW n1 710 rpm = 24.6 kW Dimensions: Shaft d1: Ø 45 mm x 110 mm Shaft d2: Ø 200 mm x 350 mm Gjdpozw H Hiofx Al Uokc Shaft height h1: 400 mm Length: 1690 mm Width without shafts: 560 mm Width with 2x shafts: 1260 mm Height: 815 mm Weight without oil: 1900 kg (For design A8, the weight increases to approximately 2000 kg) Oil capacity: 68 kg The TGL 34611 series of gearboxes for conveyor systems and hoisting equipment includes three- and four-stage gearboxes with hardened gears. The shafts are mounted in roller bearings. Splash lubrication is used. Spur gears and shafts are positively connected by means of keyways. The external dimensions of the housing for a given size are the same for both the three- and four-stage versions. In the four-stage version, the drive shaft is located below the plane of the components. The housing is made of cast iron. The gearboxes can be operated in both directions of rotation.

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 06-13795, Technical characteristics: Work Area: - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece: - Maximum nominal module (in steel with tensile strength approx. 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm Gsdpexwlmuefx Al Ujkc - Maximum spindle travel: 70 mm Load Capacity: - Maximum table load (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): ~45° Cutter Spindle: - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment: - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions: - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading - CNC control: Siemens Sinumerik 810D/840D - High precision: Positioning accuracy via Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or rotation zero-point definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor Machine status: Operational (WORKING)

Condition: good (used), Year of construction: 2011, operating hours: 10,337 h, overall weight: 3,830 kg, ALMiG Gear 132 Compressor, Screw Compressor, 10 bar The screw compressors of the GEAR series are particularly suitable for very high compressed air requirements. The maintenance- and service-friendly drive concept of the GEAR compressors includes a robust drive motor with high power reserves. The highly efficient gearbox operates with minimal slippage, high operational reliability, and an efficiency of over 98%, resulting in almost lossless operation and thus protecting the drive. Furthermore, the highly efficient coolant separation enables a minimal residual oil content of only 2–3 mg/m³. The encapsulated design of the gearbox makes these systems ideal for use under the harshest operating conditions. Ideal for very high compressed air demands Robust drive unit with high power reserves Almost lossless concept with an efficiency of > 98% Maintenance- and service-friendly drive concept ALMiG Gear 132 Year of manufacture: 2011 Final pressure: 10 bar Motor power: 132 kW Volume flow: 18.04 m³/min Length: 2800 mm Width: 1400 mm Height: 2025 mm Weight: 3830 kg Operating hours: 10,337 h Load hours: 9,378 h Downtime: 13,887 h Total delivered volume: 11,333,000 m³ Gkjdpfx Alettv Ibo Usc You can find more ALMiG compressors – new and used – in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 2001, Equipped with: Gkodporualpofx Al Ujc Power Stock Fanuc 5-Axis CNC Control 160M 400mm Honing Wheel X Axis Pulse Generator Coolant System w/Twin Filters Magnetic Chip Separator Honing Tool Set up for Last Job is Still in Machine Internal Diameter of Honing Tool on Machine is 14" Work Light Power Door Auto Dress 5-Part Program Instruction Book for 16M Control Instruction Book for Set-Up and Operation Specifications: Maximum Outer Diameter: 250 (350) Minimum Outer Diameter: 30 Maximum Overall Length: 400mm Maximum Tooth Width: 45mm Module: 1.0-3.0 Cross Feed Device(Z Axis): 430mm Max. Travel Honing Wheel Cutting Feed Device(X Axis): 370 Max. Travel Honing Wheel Swing Device(C Axis): Swing Angle: +30 Degress Honing Wheel Rotation Drive Device(A Axis): Honing Wheel Spindle Speed R/Min: 500 Honing Wheel Outer Dia.: 300 (400) Maximum Honing Wheel Width: 50mm Crowning Device (Y Axis): Maximum Rocking Angle: 1.6 Degrees Motor Types: Z-Axis Drive Motor: 1.8Kw X-Axis Drive Motor: 1.8Kw Y-Axis Drive Motor: 0.7Kw C-Axis Drive Motor: 1.8Kw A-Axis Drive Motor: 2.2/3.7Kw Maximum Distance Between Centers: 600mm Center Height: 1,100mm Floor Space: 2,170W X 2,800D X 2,100H Mass Of Machine: 4,500Kg

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 06-13796, Technical characteristics: Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Gsdsxwl N Ajpfx Al Uokc Workpiece - Maximum nominal module (in steel with a tensile strength of approximately 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load on the table (including fixtures): 150 kg - Maximum force applied by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): approx. 45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment - Operating voltage: 400 - 480 V, Control voltage: 24 V, Magnetic voltage: 24 V, Cable cross-section: 16 mm² - Connected power: 15 kW, Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Ensures optimal chip evacuation and easy loading/unloading. - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy by Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Gkodpforuakgsx Al Usc Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, rotary table diameter: 450 mm, position of the milling head: Schwenkbar (45°), table diameter: 450 mm, total length: 5,600 mm, gear diameter: 500 mm, total height: 3,100 mm, total width: 3,600 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 340 rpm, table bore: 125 mm, spindle speed (min.): 80 rpm, travel distance X-axis: 325 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, overall weight: 14,800 kg, distance table to spindle center: 350 mm, tool diameter: 200 mm, controller manufacturer: Siemens Sinumerik 840D sl, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A Pfauter PE 500 for the economical production of straight and helical spur gears up to module 12 and 500 mm in diameter – completely overhauled by SerWeMa with Siemens Sinumerik 840D sl, equipped with a gripper unit and a 32-position workpiece storage for unmanned operation. The machine is ready for operation in our hall in Chemnitz: you can inspect it under power, and if desired, we will mill your own sample part and you can take delivery of the machine here. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul and knows the machine inside out. Gsdoz Et E Ejpfx Al Uekc The general overhaul included complete geometric overhaul by grinding and scraping, new roller bearings in the main drive and in the milling head, measuring and reconditioning the worm gear, overhauled or new ball screw drives, overhaul of hydraulics, lubrication and coolant system, and new electrical equipment with Sinumerik 840D sl, Sinamics S120 and new axis motors. An electronic generating gear controls all generating and single-part machining processes, and an NC-controlled crash recovery protects the tool and workpiece in the event of a power or phase failure. New paint in RAL 7035/5015 with oil and coolant resistant two-component paint, acceptance of geometry according to SerWeMa protocol based on DIN ISO 6545. The machine controls six CNC axes: X radial, Y tangential, Z axial, A milling head swivel, B milling cutter drive and C table drive. The SerWeMa gear cutting software guides you through workpiece and tool data via masks, without the need for programming: up to three position-oriented gearings per workpiece, each with its own tool, up to three cuts per gearing with simultaneous or counter-rotating movement, form corrections for convex, conical and convex-conical profiles, lead-in and lead-out phase correction, chamfer milling, dimension correction via tooth width, two-roll or two-ball gauge, measuring stop, shift strategy with defect management per generating cutter and cutting force monitoring with automatic retraction. Technologies: generating milling, single-part milling and worm gear milling both radially and tangentially. A hand-held device with a handwheel allows setup directly in the working area. Technical data: max. workpiece Ø 500 mm, max. module 12, max. milling cutter Ø 200 mm, max. milling cutter length 240 mm, shift travel 200 mm, milling cutter speed 100–450 rpm, swivel angle +25°/−45°, travel radial 325 mm (axis distance 25–350 mm), travel axial 400 mm (310–710 mm), table diameter 450 mm, table bore 125 mm, connection power approx. 60 kVA. Installation dimensions incl. automation approx. 7.2 × 4.5 × 3.3 m, weight approx. 16.8 t. Equipment: machine enclosure, chip conveyor, gripper unit with two grippers, workpiece storage with 32 positions, preparation for emission extraction (150 mm nozzle, Harting connector on the machine roof). Documentation complete in German: operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagrams. Serwema optionally offers: trial part milling in our factory, additional milling arbors, assembly and commissioning at your location, operator training and a control system upgrade to Sinumerik ONE. Spare parts and service come from a single source, worldwide, even after the purchase.

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Gsdpfxjrtrzde Al Uskc Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: used, Year of construction: 1983, max. wheel diameter 1500 mm gear width 550 mm max. module 25 min. module 2 Gedpfx Asyq Szaol Uekc workpiece weight max. 6000 kg max. number of teeth 432 min. number of teeth 12 table diameter 990 mm grinding wheel size 400 mm total power requirement 75 kW weight of the machine ca. 20,5 t With tailstock max. wheel dia. 1250mm, without tailstock 1500mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, rotary table diameter: 900 mm, position of the milling head: Schwenkbar (35°), table diameter: 900 mm, total length: 6,000 mm, gear diameter: 1,200 mm, total height: 3,500 mm, total width: 3,900 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 360 rpm, spindle speed (min.): 36 rpm, travel distance X-axis: 725 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 1,000 mm, overall weight: 24,000 kg, distance table to spindle center: 780 mm, tool diameter: 280 mm, controller manufacturer: LH90, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A young Liebherr LC 1203 from the current LC generation: manufactured in 2009, with a motor milling spindle, capable of processing workpieces up to 1200 mm in diameter and weighing 9.5 tons, module 20 – the machine for large gears in gearbox manufacturing, wind power, mining, and heavy machinery construction. Serwema Retrofit Solutions, Chemnitz, optionally upgrades the machine to Siemens Sinumerik ONE, the latest control generation with full spare parts and support availability, and delivers it with a new, air-conditioned control cabinet manufactured in-house and a user-friendly interface. The mechanics remain in the well-maintained original condition with the original paint – a Liebherr from 2009 does not need a general overhaul, but a control system that will last for the next 20 years. Delivery time is six months from order. The machine mills spur and helical gears, as well as shafts up to module 20, in a reinforced version up to module 24, starting from a tooth count of 1 – including worm gears and special profiles. With 1000 mm of axial travel between the milling spindle axis and the table surface, long pinion shafts are securely clamped, and the 900 mm table supports 95 kN. The motor milling spindle rotates from 36 to 360 rpm, the milling head swivels by ±35°, and the tangential travel of 320 mm utilizes the full milling cutter length of 340 mm for long service life. Gkedpfx Aloz E Hx Sj Uoc Technical data: max. workpiece diameter 1200 mm, max. workpiece weight approx. 9.5 tons (table load 95 kN), table diameter 900 mm, distance between milling spindle axis and table axis 55–780 mm, distance between milling spindle axis and table surface 200–1200 mm, max. module 20/24, min. number of teeth 1, max. milling cutter diameter 280 mm, max. milling cutter length 340 mm, tangential travel 320 mm, milling cutter speed 36–360 rpm, max. table speed 12 rpm, swivel angle ±35°. Installation dimensions approx. 6.0 × 3.9 × 3.5 m, weight approx. 24 tons. Scope of delivery: optionally, a new Siemens Sinumerik ONE control system with Sinamics S120 drives, air-conditioned control cabinet manufactured in-house, user-friendly interface with Serwema gear cutting software, machine enclosure, magnetic chip conveyor, circulating and loss lubrication, hydraulic unit, coolant system, operating manual. Original color scheme. Acceptance in Chemnitz together with you; a mechanical overhaul or geometry inspection according to DIN is offered additionally upon request.

Condition: good (used), Year of construction: 1976, max. wheel diameter 2300 mm gear width 1000 mm max. module 22 Gsdjzr Rpdopfx Al Uokc min. module 1 total power requirement 45 kW weight of the machine ca. 22 t dimensions of the machine ca. 5x3x4 m

Condition: good (used), Year of construction: 1976, max. wheel diameter 1250 mm gear width 1000 mm max. module 16 shifting 250 mm milling spindle speeds (infinitely variable) 32 - 200 U/min min. number of teeth 12 table hole 255 mm total power requirement 32 kW Godpfx Aozr Rpksl Uekc weight of the machine ca. 20 t dimensions of the machine ca. 5,1 x 3,2 x 3,7 m Top condition! 2 cut cycle, change gears, arbors, chip conveyor. Following hob arbors are with the machine: Diameter: 32 , 40 , 50 , 60 mm

Condition: repair required (used), Year of construction: 1987, functionality: unexamined, Max. diameter with counter support: 1450 mm Max. diameter without counter support: 2100 mm Diameter of the clamping table: 1800 mm Gjdpfoz Df A Tox Al Uskc Total weight: 38 tons The clamping table has been disassembled and overhauled.

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, For sale: this gear hobbing machine. It is connected and can be tested. Comes with numerous accessories. Technical specifications: Max. gear diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 4000 mm Hob diameter x width: 400 x 500 mm Max. helix angle: 45 degrees Godpexwlthsfx Al Uokc Cutter diameter: 500 mm Cutter speed: 9–63 rpm Total power consumption: 47 hp Machine weight: 160,000 kg The machine has hydraulic workpiece balancing. A video of the machine can be sent via WhatsApp.

Condition: used, Year of construction: 2015, overall weight: 16,000 kg, total height: 2,200 mm, total length: 4,410 mm, total width: 2,600 mm, GROB C6-A – Cold Rolling Machine Technical Data: Gear Module: up to approx. 2.3 Gear Diameter: approx. 8–80 mm Max. Clamping Diameter: approx. 315 mm Power: 25 kW Godpfx Alez E Ra Hs Uskc Weight approx.: 16,000 kg Dimensions (LxWxH) approx.: 4410 x 2600 x 2200 mm Year of construction: 2,015 Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Condition: ready for operation (used), Equipment: documentation/manual, Lieberr - Lorenz S800 / Gear Hobbing Machine Gjdpfx Alezv Ed Dj Uokc -Well-maintained machine with extensive accessories -1 pallet / Change gears -1 pallet / Hobbing cutters -1 pallet / Clamping arbors DOCUMENTATION -Max. workpiece length with counter support 600mm -Max. workpiece length with retracted counter support 800mm -Max. travel of the milling slide 360mm -Largest millable pitch with the largest workpiece 5 PI / Normally 8 PI -Taper for spindle - Milling spindle MK 5 -Milling arbors / 22 / 27 / 32 / 40 mm -Max. cutter diameter 186mm -Max. cutter length 170mm -Max. cutter feed 80mm -Cutter speeds 40 - 220 rpm -Feeds infinitely adjustable / Horizontal -Feeds infinitely adjustable / Vertical -Feeds infinitely adjustable / Tangential -Clamping table without water trough 550mm -Clamping table bore 100mm -Clamping arbor taper MK 4 Dimensions: L x W x H 3.6 x 1.8 x 1.9 meters / Weight: 5000 kg Errors and omissions excepted.