Used Beveller for sale (510)

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Fedpfx Akjruakgsvogb Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: good (used), Year of construction: 2007, max. wheel diameter 500 mm gear width 200-400 mm module 12 turning speeds 0-3250 U/min bracke pressure bis max. 95 Nm inner taper Konus #39 Control Fanuc 16 total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS Fodpfjvr Hf Esx Akvogb The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm.

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) Fjdpfexaqa Sjx Akvegb A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Fsdoxdfazspfx Akvjgb Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Fodsxdfa Uepfx Akvogb Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Fsdpfx Akjrtrzdevegb Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs. Fjdpfx Aksrtryksvsgb

Condition: used, Year of construction: 2018, Used angle head for Holz Her CNC machining centers Year of manufacture: 2018 HSK 63 F holder with torque support with 2 horizontal tool spindles suitable for holding a CLAMEX grooving cutter and a saw blade Technical data: max. drive speed: 8,000 rpm max. output speed: 12,000 rpm Permissible operating temperature: 85°C Unit swivels 360° around drive axis Fsdpfx Akjwkbcnsvsgb Sound level: 80 dB(A) Weight: 3.257 kg Availability: short-term Storage location: Hochheim

Condition: used, Year of construction: 2000, Technical details: max. wheel diameter: 275 mm gear width: 55 mm max. module: 6,5 min. module: 1,5 Face Hobbing-Continious Process Fgsdpov N Hilefx Akvjb Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be “prepared” for the individual part procedure. I.e. direct measuring system + part gear brake, workpiece axis + license file for the production of individual parts. *

Condition: used, Year of construction: 1998, workpiece diameter with ratio 1:10 300 mm workpiece diameter with ratio 1:1 212 mm max. number of teeth 200 min. number of teeth 6 x-travel 300 mm Fgjdpfx Aeul El Tekveb X - Axis speed 0,1-5.000 mm/sec. y-travel 400 mm Y - Axis speed 0,1-5.000 mm/sec. A - axis -170 / +170 ° control Siemens Sinumerik 840 C total power requirement 38 kW weight of the machine ca. 10 t dimensions of the machine ca. 4,20 x 2,20 x 2,10 m incl. suction

Condition: new, functionality: fully functional, machine/vehicle number: 01.3206969317.0003.00, power: 2.2 kW (2.99 HP), rotational speed (max.): 1,400 rpm, input frequency: 50 Hz, type of input current: AC, overall weight: 89 kg, torque: 1,700 Nm, protection type (IP code): IP54, Voltage: 230/400 V (three-phase current) Brake voltage: 400 V AC Insulation class: B This bevel geared motor is a powerful drive solution that is ideal for demanding industrial applications. With its robust design and high efficiency, this motor offers reliable performance at variable speeds. The integrated bevel gearbox ensures a compact design and enables optimum power transmission. Fodpou Datqjfx Akvegb It is particularly suitable for conveyor technology, mechanical engineering and other industrial applications where precision and durability are required.

Condition: good (used), Year of construction: 1978, max. pitch circle 152 mm Number of teeth 8-50 St. weight 7500 kg Technical data – Min./max. foot cone angle: 15° / 55° – Pitch circle diameter: 152 mm – Max. tooth height with 21° finished broach head: 10.7 mm – Max. tooth width at tooth root with 21°: 28 mm – Broach head diameter: 200 mm – Number of teeth range: 8–50 – Max. broach head diameter: .21" Workpiece spindle – Diameter of the tapered bore at the wide end: 99.219 mm – Clamping length at 304.8 mm: 15.478 mm – Taper depth: 15.875 mm – Diameter of the entire spindle bore: 22.225 mm Maximum tooth height: 14.8 mm Maximum tooth width at the root: 28 mm Maximum root angle: 55° Minimum root angle: 15° Milling head speed: 32.6-49.7 m/min Feed speeds (seconds per tooth): 2-3.1 Index range: 8-50 mm Diameter of taper bore at large end: 99 mm Taper per foot: 15.4 mm Depth of taper: 15.8 mm Countersink behind the taper: 57.2 x 77.9 mm Diameter of the bore through the spindle: 22.3 mm Power of the main drive motor: 10 HP Rotation of the main drive motor (60 Hz/50 Hz): 1800/1500 rpm Rotation of the hydraulic motor (60 Hz/50 Hz): 1800/1500 rpm Rotation of the coolant pump (60 Hz/50 Hz): 3600/3000 rpm Rotation of the chip screw motor (60 Hz/50 Hz): 1800/1500 rpm Fgodpexq Hgcefx Akveb Footprint (L x W): 320 x 221 cm Total weight of the 726 REVACYCLE machine: approx. 9 t

Condition: excellent (used), For sale: Professional tube deburring machine TUBOGRAT, manufactured by the German company Tracto Technik Spezialmaschinen. The device is designed for processing tube ends and removing internal and external burrs. Ideal for workshops, production, and installation purposes. Robust construction ensures long and trouble-free operation. Technical data Manufacturer: Tracto Technik Spezialmaschinen KG Fedpeyvgp Tefx Akvegb Model: TUBOGRAT TG 138 Diameter range: 6 to 42 mm Rotational speed: 180 rpm Direction of rotation: left Power supply: 380 V Phases: 3 Frequency: 50 Hz Power: 0.12 kW Current: 0.4 A Condition Device in good technical condition Visible signs of use Machine is operational

Condition: excellent (used), For sale: professional TRUMPF TruTool TKA 500 (1A1) plate edge beveller / chamfering machine. This machine is designed for making weld preparations and machining edges on steel plates. Condition: used, fully operational, normal signs of use visible in the photos. Industrial-grade equipment – made in Switzerland / Germany. Technical data: Power: 1400 W Supply voltage: 230 V / 50–60 Hz Current: 6.5 A Model: TruTool TKA 500 (1A1) Year of manufacture: 2009 Manufacturer: TRUMPF Applications: Bevelling plate edges before welding Chamfering for V and X weld joints Processing of structural and machine steel Workshops, fabrication, steel construction Scope of delivery: TRUMPF TruTool TKA 500 beveller Original TRUMPF transport case Fjdpfxeyhnuko Akvogb Manufacturer’s manual / documentation Accessories as shown in the photos The equipment is ready for operation. On-site inspection possible. Shipping or personal collection – to be arranged.

Condition: used, For sale: Professional pipe beveling/chamfering machine by FEIN with GF (Georg Fischer) RA4 head, mounted on a solid workshop stand for pipe processing. This device is used for beveling pipe ends prior to welding—preparing a V-type weld edge. Industrial equipment used in pipeline workshops, industrial installations, and when constructing process plant systems. The machine is of very robust construction, made in Germany. Comfortable operation thanks to a stable stand. Fedsyt Ifgopfx Akvjgb Technical data • Drive manufacturer: FEIN – Made in Germany • Model: 680 CB1641 • Power: 1600 W • Voltage: 200–240 V • Frequency: 50–60 Hz • Current: 8.8 A • Speed: 150–270 rpm Head • Manufacturer: Georg Fischer (GF) • Type: RA4 Applications • Pipe beveling • Pipe preparation for welding • Pipeline work • Welding workshops • Industrial installations Visual and technical condition as shown in the photos. Solid industrial-grade machine.

Condition: excellent (used), Advantages of the GF4: - Larger working range - Clamping jaws made of aluminum - Motor enables cutting of pipes made from very hard materials - 30% weight reduction due to new body design - Laser cutting position indicator - New ergonomic handle - Power cable with swivel and quick connector The GF4 machine can be operated with the AVM automatic rotation module. Technical specifications: - Pipe outer diameter [mm]: 12 - 120 - Pipe wall thickness [mm]: 1 - 9 - Minimum pipe inner diameter (63 mm blade) [mm]: 21 - Minimum pipe inner diameter (68 mm blade) [mm]: 16 - Minimum pipe inner diameter (80 mm blade) [mm]: 4 - Built-in electronic speed controller: 65 - 215 rpm - Power: 1.8 kW without AVM / 1.9 kW with AVM, 200-240 V, 50/60 Hz - Protection class: II - Vibration level (EN 2662, part 1): 2.5 m/s² - Noise level: 79 dB (A) The GF series machines are orbital pipe and elbow cutting machines. The pipes to be cut are clamped in a self-centering, prismatic vice, which prevents deformation. Pipe diameter and tool speed can be easily set via intuitive controls, depending on the material type. The cutting device is guided manually around the pipe, while the electrically driven blade cuts or bevels the pipe edge. This is a planetary cutting method introduced by Georg Fischer. Orbital cutting is a time- and cost-saving process: - Perpendicular, flat, and burr-free cuts - Pipe ends prepared for various joining techniques without additional processing - Cold cutting - No overheating, preventing intergranular corrosion that could cause material cracking - Fast cutting - Saves time and money - Pipe edge beveling - Pipe ends can be beveled simultaneously during the cutting process or separately Optional parts: GF and RA machines can be supplied with either an automatic rotation module (AVM) or manual module (MVM). The AVM module continuously monitors cutting speed according to torque and set parameters. The MVM module, utilizing a gear and handle, enables effortless rotation of the machine head at a constant speed. Fgedpsym Unzjfx Akvjb

Condition: good (used), Year of construction: 2011, functionality: fully functional, GERIMA - The beveling machine is specifically engineered for high-precision processing on both linear and non-linear edges, with full adaptability to varying sheet thicknesses and geometries. Fgedpfxstmrkre Akvsb -Featuring an advanced Trace Tracking System, it intelligently detects and follows complex part contours—ensuring accurate, consistent, and efficient beveling, even on intricate components.

Condition: new, Year of construction: 2026, -Tfon Bevel Wizard® Linear. -Precision Beveling for Linear & Non-Linear Applications. -The TFON Bevel Wizard® Linear is a high-performance beveling solution designed to deliver exceptional accuracy on both straight and contoured sheet edges. Engineered with flexibility at its core, it features an advanced Trace Tracking System that automatically adjusts to variations in material thickness and geometry—ensuring precise and consistent edge processing even for complex parts. -Key Features 🔹 Advanced Trace Tracking System: Intelligently detects and adapts to diverse edge shapes and contours in real time. 🔹 Wide Beveling Range: Adjustable bevel angles from -30° to +80°, ideal for a broad range of applications. - Optimized for Large Workpieces: Fedort Tpnspfx Akvegb Capable of processing materials up to 12,000 mm in length and 100 mm in thickness. - Industrial-Grade Durability: Built to last with a solid 10,000 kg frame for long-term reliability. 🔹 Superior Surface Finish: Delivers a high-quality finish with a consistent Emery Band Rotation Speed of 30 m/min and a Ø135 mm contact wheel. -Technical Specifications: Beveling Angle Range: -30° to +80° -Material Thickness: 4 – 100 mm -Minimum Material Width: 250 mm Minimum Material Length: 250 mm Maximum Material Length: 12,000 mm Part Feed Speed: 1.5 – 5 m/min Part Completion Speed: 3 meters/day Maximum Part Indentation: Ø400 mm Emery Band Rotation Speed: 30 m/min Contact Wheel Diameter: Ø135 mm. Emery Band Drum Diameter: Ø400 mm. Machine Weight: 10,000 kg Engineered for precision. Built for performance. Designed for industrial excellence Tfon Bevel Wizard® Linear — Where Accuracy Meets Efficiency.

Condition: used, cone distance min./max. 0-108 mm Pitch angle min/max 5°/84° Control GE Fanuc Series 0-GC Pitch diameter (1:1 ratio) 152 mm pitch diameter (10:1 ratio) 216 mm Diametral pitch (finest/coarsest) 1.3/8.5 Mod. Face width gear wheel max. 35 mm Knife spindle - Speed range 41-121 U/min working spindle speed range 0-33.33 U/min weight 9025 kg dimensions of the machine ca. 2707 x 2720 x 2200 mmxmmxmm Equipment/accessories: -Knife Fsdpfoyh Rmmsx Akvogb -Chip conveyor -Technical documentation

Condition: used, Year of construction: 2007, max. wheel diameter 500 mm Hypoid adjustment ±70 mm axial cross angle 90 ° Distance Y- 150 - 350 mm Distance Z-axis 120 - 340 mm turning speed range - stepless 0 - 5000 U/min max. torque on the spindle 57 Nm Cone 99,2 mm Pull-in force Tool clamping 23000 N Braking torque max. 93 Nm total connected load 20 kVA total power requirement 15 kW weight of the machine ca. 6 t Fgodpfsukitxsx Akveb dimensions of the machine ca. 2,35 x 2,24 x 2,5 m

Condition: refurbished (used), Overhauled 3-stage bevel-helical gearbox FLENDER, Model: KZA 360, P = 194 kW, n1 = 1,500 rpm, n2 = 60 rpm Fjdpfx Akjyhngtevjgb

Condition: ready for operation (used), CAPE BRAND EPAL BEVELING MACHINE WORKING. MAXIMUM SIZE 2500mm Fgodpfx Aok Nf S Ujkveb

Operating hours: 7 h, condition: as good as new (ex-display), functionality: fully functional, Micro-stationary system for the production of a zero joint - jointless optics as if from a single casting A machining table is also available as an option Fodpfsd St R Sex Akvsgb - Heating time:ᐸ30Sekunden - max. edge height 65mm (option 103mm), max. edge thickness 3mm - Processing of so-called "laser edges" (co-extruded and post-coated edges, as well as old-classically pre-coated EVA hot-melt adhesive edges) - higher heat resistance and water resistance - perfectly straight, inclined, curved and round panel materials as well as moulded parts can be processed. - sloping cut surfaces of up to 55° (installation in the available table) - high process reliability & lower follow-up costs; - no glue change necessary = almost no set-up costs; - no burning of the glue; - no glue residue on the workpiece - Infinitely variable feed speed from 1 to 5.5 m/min. - continuously adjustable hot air up to 520°C - 230VoltAC, 4m connection cable, compressed air hose - 3,05kW - low air requirement, assembly compressor is sufficient The zero joint unit can be used mobile as well as micro-stationary! Optimal e.g. for larger moulded parts and for use on the construction site. For this purpose, a Systainer with an additional supply line for electricity and compressed air is included in the scope of delivery. The system is also available for retrofitting in an edge banding machine (Hot air, Airtec) - please ask us

Condition: ready for operation (used), Year of construction: 1980, Gleason Hypoid cutter Sharpener 13A -1 pcs Milling diameter 89-500 mm Grinding wheel dimensions 305x19x102 mm Feed 0,05-0,18 mm Fgjdpsr Elpvjfx Akveb Grinding wheel drive motor - 1800 rpm (60 Hz) - 1500 rpm (50 Hz) Floor space 1240x2310 mm Height 1422 mm Machine weight 4083 kg Gleason 19 revacicle cutter checking machine - 1 pcs

Condition: used, Year of construction: 2002, operating hours: 1,500 h, input current: 43 A, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, power: 17 kW (23.11 HP), We offer this used bevelling machine/edge polisher Z. Bavelloni B 73 CN, year of manufacture 2002. Machine type: B 73 CN Order number: 111447 Year of manufacture: 2002 Circuit diagram no.: 6015.04.12 Voltage: 400 V Number of phases: 3 Frequency: 50 Hz Power: 17 kW Current: 43 A If you have any questions or require additional information, please send us a message or contact us by phone. Fodpfx Aksy E Nmwovjgb