Used Bevel Wheel for sale (20,224)

Condition: new, functionality: fully functional, empty load weight: 4 kg, in original packaging, without any warranty whatsoever Isdpfxoyftbwj Abrshu

Condition: new, Year of construction: 2025, -Tfon Bevel Wizard® Linear -Precision Beveling for Linear & Non-Linear Applications. -The TFON Bevel Wizard® Linear is a high-performance beveling solution designed to deliver exceptional accuracy on both straight and contoured sheet edges. Engineered with flexibility at its core, it features an advanced Trace Tracking System that automatically adjusts to variations in material thickness and geometry—ensuring precise and consistent edge processing even for complex parts -Key Features 🔹 Advanced Trace Tracking System: Intelligently detects and adapts to diverse edge shapes and contours in real time. 🔹 Wide Beveling Range: Adjustable bevel angles from -30° to +80°, ideal for a broad range of applications - Optimized for Large Workpieces Capable of processing materials up to 12,000 mm in length and 100 mm in thickness. - Industrial-Grade Durability: Built to last with a solid 10,000 kg frame for long-term reliability. 🔹 Superior Surface Finish: Delivers a high-quality finish with a consistent Emery Band Rotation Speed of 30 m/min and a Ø135 mm contact wheel. -Technical Specifications: Beveling Angle Range: -30° to +80° -Material Thickness: 4 – 100 mm -Minimum Material Width: 250 mm Minimum Material Length: 250 mm Maximum Material Length: 12,000 mm Part Feed Speed: 1.5 – 5 m/min Part Completion Speed: 3 meters/day Maximum Part Indentation: Ø400 mm Emery Band Rotation Speed: 30 m/min Contact Wheel Diameter: Ø135 mm Iodort Tpnepfx Abrehu Emery Band Drum Diameter: Ø400 mm Machine Weight: 10,000 kg Engineered for precision. Built for performance. Designed for industrial excellence Tfon Bevel Wizard® Linear — Where Accuracy Meets Efficiency.

Condition: new, Year of construction: 2026, FABO Bucket wheel washers are intended to maximize the support of various terms throughout the process, such as the maximum recovery of fines or maximum remove of fines with lower power capacity. Sand and water compound is supplied into the washing tank of bucket wheels and the sand is obtained and dewatered by impellers after washing. The dirty water enters the spiral tank for fine sand pressing, then the pressed fine sand is shifted into the bucket wheel tank by the gradually rotating spiral blade, the fine sand is carried out by the buckets, dewatered and discharged. Iedpfx Aewck N Iobrshu

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2025, A spiral-type sand washer machine, also known as a spiral sand washing machine or screw sand washer, is a piece of equipment designed for washing, classifying, and dewatering sand and other granular materials. This type of sand washer typically features a spiral or screw-shaped structure for the purpose of lifting, conveying, and washing materials. Here are key features and aspects of a spiral-type sand washer machine: 1. Spiral Structure: The core component of the machine is a spiral or screw-shaped structure, often enclosed within a tub or trough. This spiral impeller is responsible for lifting, conveying, and washing the sand as it rotates. 2. Tub or Trough Design: The spiral structure is usually housed within a tub or trough that holds the water and sand mixture. This design allows for efficient washing and separation of impurities from the sand. 3. Multiple Blades: The spiral impeller typically has multiple blades or flights that provide mechanical agitation to the sand, ensuring thorough cleaning. 4. Water Injection: Water is injected into the tub or trough to aid in the washing process. The combination of water and the rotating spiral helps to remove impurities from the sand. 5. Adjustable Weirs: Some spiral-type sand washers have adjustable weirs or gates that control the flow of water and the retention time of the sand in the machine, allowing for customization of the washing process. 6. Classification and Dewatering: Spiral sand washers often include features for classifying and dewatering the sand. This may involve the use of a separate compartment or mechanism for fine sand recovery and water drainage. Ihodpfx Abjq Nf S Rjrsu 7. Variable Speed: The rotational speed of the spiral can often be adjusted to optimize the washing process for different types of materials and particle sizes. 8. Capacity: The capacity of a spiral-type sand washer is influenced by factors such as the size of the machine, the pitch of the spiral, and the efficiency of the washing process. Different models are available to suit various production requirements. 9. Materials Handling: Spiral sand washers are commonly used in applications such as aggregate processing, mining, concrete production, and other industries where the removal of impurities from sand is essential. 10. Ease of Maintenance: Many spiral-type sand washers are designed for easy maintenance, with accessible components and inspection points. Spiral-type sand washer machines are efficient tools for cleaning and processing sand, ensuring that the final product meets quality standards for use in construction, concrete production, and other applications. The specific features and capabilities of these machines can vary between different models and manufacturers.

Condition: good (used), Year of construction: 2007, max. wheel diameter 500 mm gear width 200-400 mm module 12 turning speeds 0-3250 U/min bracke pressure bis max. 95 Nm inner taper Konus #39 Control Fanuc 16 total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS Ijdpfx Aovr Hf Eobrjhu The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm.

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Iodpfxsxaqa Se Abrehu Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Iedjxdfazopfx Abrshu Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Iodjxdfa Uspfx Abrohu Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Ihsdpfx Aertrzdjbrou Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Ihodpfx Abortrykerju Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Iedpfx Aoruakgsbrjhu Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: used, mileage: 122,196 km, Year of construction: 2017, operating hours: 8,592 h, General information Field of application: Construction Serial number: 256086 Drivetrain Drive: Wheel Weights Empty weight: 26.000 kg Functional Ijdpfx Aew Uchxobrohu Lifting capacity: 40.000 kg Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Dunlop Carrier engine: - Upper engine: - Counterweight: 5500 Transport dimensions (LxWxH): 10.7x2.55x3.4 Additional information Please contact PFEIFER GROUP for more information

Condition: used, workpiece length / mm Iedpfsyk Imrex Abrjhu work piece width / mm workpiece height / mm FLAT GRINDING MACHINE UMA 19

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 558 h, load capacity: 3,500 kg, lifting height: 4,830 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,300 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: very good Front tires Type: Superelastic Front tires Condition: 80 - 100% Ihedpfx Ajxllunjbrou Rear tires Type: Superelastic Rear tires Condition: 80 - 100% 3rd valve, 4th valve, rear working lights, front working lights, heating, full cab, full free lift, -without driver's door

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 1,273 h, load capacity: 3,500 kg, lifting height: 4,830 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,300 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Iodpfoxpai Iox Abrohu Mast type: Triplex Technical condition: very good Front tire type: Superelastic Front tires condition: 80 - 100% Rear tire type: Superelastic Rear tires condition: 80 - 100% 3rd valve, 4th valve, rear work lights, front work lights, heater, full cabin, full free lift, LED,

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,460 h, load capacity: 2,000 kg, lifting height: 5,000 mm, free lift: 1,700 mm, mast type: triplex, construction height: 2,250 mm, fork length: 1,200 mm, empty load weight: 4,000 kg, total length: 2,200 mm, construction width: 1,160 mm, Electric 4-wheel forklift Load center: 500 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: good Front tires type: Superelastic Front tires condition: 80 - 100% Ijdoyk Nagopfx Abrohu Rear tires type: Superelastic Rear tires condition: 80 - 100% Battery voltage: 48V Battery capacity: 750Ah Battery year: 2019 Sideshift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, overhead guard, front windscreen, heater, full cabin, impulse control, full free lift, CE certificate.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 1,620 h, load capacity: 1,600 kg, lifting height: 3,300 mm, free lift: 1,300 mm, fuel type: electric, mast type: duplex, construction height: 2,180 mm, fork length: 1,200 mm, empty load weight: 3,300 kg, total length: 2,000 mm, drive type: Elektro, construction width: 1,060 mm, Electric 3-wheel forklift Load center: 500 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Duplex Technical condition: very good Front tires type: Superelastic Front tires condition: 100% Rear tires type: Superelastic Rear tires condition: 100% Battery voltage: 48V Battery capacity: 750Ah Ijdjykvx Aspfx Abrohu Battery manufacturer: Factory-refurbished in 2025 Battery year of manufacture: 2025 Description: Factory-refurbished used unit by Toyota including new inspection and new certification according to FEM (formerly UVV). Side shifter, 3rd valve, 4th valve, rear working lights, front working lights, overhead guard, front windscreen, impulse control, full free lift, CE certificate, safety light.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 2,550 h, load capacity: 1,600 kg, lifting height: 4,700 mm, free lift: 1,610 mm, mast type: triplex, construction height: 2,120 mm, fork length: 1,200 mm, empty load weight: 3,440 kg, total length: 2,000 mm, construction width: 1,100 mm, Electric 3-wheel forklift Load centre: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: good Iodpfx Abjykvxvsrohu Front tyres type: Superelastic Front tyres condition: 80 - 100% Rear tyres type: Superelastic Rear tyres condition: 80 - 100% Battery voltage: 48V Battery capacity: 750Ah Battery year: 2020 Description: Vehicle has already been fully reconditioned for end customer. Sideshift, 3rd valve, front working lights, load protection guard, impulse control, full free lift, CE certificate, Safety Light, Safety Pilot,

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,290 h, load capacity: 1,600 kg, lifting height: 4,700 mm, free lift: 1,400 mm, fuel type: electric, mast type: triplex, construction height: 2,150 mm, fork length: 1,200 mm, empty load weight: 3,510 kg, total length: 2,000 mm, drive type: Elektro, construction width: 1,060 mm, Electric 3-wheel forklift Load center: 500 mm Ihodpfx Aeykvxpsbrou ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: very good Front tires type: Superelastic Front tires condition: 100% Rear tires type: Superelastic Rear tires condition: 100% Battery voltage: 48V Battery capacity: 750Ah Battery manufacturer: Factory reconditioned in 2026 Battery year: 2026 Description: Toyota factory-refurbished used machine including new inspection and new approval in accordance with FEM (formerly UVV). Sideshift, 3rd valve, 4th valve, front working lights, roof cover, front window, impulse control, full free lift, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 4,433 h, load capacity: 1,400 kg, lifting height: 4,100 mm, fuel type: electric, mast type: triplex, drive type: Elektro, Electric 3-Wheel Forklift Mast Type: Triplex Condition: Ready for use and fully functional Technical Condition: Good Ihjdeykc Ukepfx Abrsu Battery Voltage: 48V Battery Type: PzS Battery Year of Manufacture: 2020 Sideshift, 3rd valve,

Condition: used, Year of construction: 1998, operating hours: 13,258 h, 1998 | Liebherr L 522 with High-Tipping Bucket | Used Wheel Loader | 13258 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 12900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 54 inspection points 53 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Iodpfxoyk Drwe Abrehu Wheel loader Liebherr L522 with high dump bucket. the condition of the machine corresponds to the value of the operating hours. leakage hydraulic oil on one of the two chassis motors. at the time of inspection, the machine ran / functioned without any other abnormalities. the machine shows wear on bolts and bushings corresponding to the age and mileage and the purpose of use, as well as signs of use (dents, abrasions, etc.) and corrosion. the machine has not been tested under load. well maintained and serviced machine. ready for immediate use. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "32949 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 667 h, load capacity: 3,000 kg, lifting height: 6,500 mm, free lift: 1,950 mm, fuel type: electric, mast type: triplex, construction height: 2,850 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Ihedsykcxiepfx Abrju Transmission: Automatic Condition: As new Technical condition: Very good Front tires type: Superelastic Front tires condition: 40 - 60% Rear tires type: Superelastic Rear tires condition: 40 - 60% Battery voltage: 80V Battery year: 2020 Description: Price includes new UVV inspection, paintwork in very good (original) condition. The 2020 battery is reconditioned with a power cycler including Kappa test, matching charger with plug, Sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, semi-cab, load backrest, full free lift, CE certificate, safety light, semi-cab with PVC doors.

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 5,500 mm, free lift: 1,735 mm, fuel type: electric, mast type: triplex, construction height: 2,505 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 mm ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Electromechanical Condition: New Technical condition: New Front tyre type: Superelastic Front tyre size: 7.00-12 Rear tyre type: Superelastic Rear tyre size: 6.00-9 Battery voltage: 80V Ihodpfx Abexllz Ujrju Battery capacity: 350Ah Battery manufacturer: Noblelift Battery type: Lithium-ion Battery year of manufacture: 2025 Battery condition: New Description: In addition to this model, we also offer other forklifts and warehouse technology equipment. All our machines undergo workshop and FEM 4.004 inspections. Please contact us by email or phone. You can also find us under hsr-gabelstapler. Of course, we are also interested in purchasing your used equipment—even if you do not buy a vehicle from us. Leasing & financing on favourable terms are available on request. We will be happy to provide you with professional and comprehensive advice on our vehicles. Side shifter, fork positioner, rear working light, front working light, semi-cab, load guard, full free lift, interior mirror, windscreen wiper, single-pedal control, LED, seat.

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 9,009 h, load capacity: 2,000 kg, lifting height: 4,800 mm, free lift: 2,270 mm, fuel type: electric, mast type: telescopic, construction height: 2,850 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Telescopic Iedpfx Aju D S Nqsbrehu Gearbox: Electromechanical Technical condition: Good Front tires Type: Non marking Front tires Size: 200/50-10 Front tires Condition: 60 - 80% Rear tires Type: Non Marking Rear tires Size: 16x6-8 Rear tires Condition: 60 - 80% Battery Volt: 48V Battery Ah: 625Ah Battery Manufacturer: HSR Battery year of construction: 2016 Battery condition: 80 - 100% Description: Charger included Sideshift, 3rd valve, rear working light, front working light, safety light, Flashlight, Blue Spot

Condition: new, functionality: fully functional, Year of construction: 2023, load capacity: 1,600 kg, lifting height: 4,800 mm, free lift: 1,590 mm, fuel type: electric, mast type: triplex, construction height: 2,175 mm, fork carriage width: 1,000 mm, fork length: 1,150 mm, empty load weight: 3,120 kg, total length: 2,968 mm, drive type: Elektro, construction width: 1,086 mm, Electric 3-wheel forklift Load center: 500 Fork width: 100 mm Fork thickness: 35 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Gearbox: Electromechanical Condition: New machine Technical condition: New Iodju D S Itjpfx Abrohu Front tires type: Superelastic Front tires size: 18x7-8 Rear tires Type: Superelastic Rear tires size: 15x4/5-8 Battery Volt: 48V Battery Ah: 625Ah Battery Manufacturer: GNB Battery type: PzS Battery year of construction: 2023 Description: In addition to this device, we offer other forklifts and warehouse equipment. Our devices are workshop and FEM4.004 tested. Please contact us by e-mail or by phone. You can also find us at hsr-gabelstapler Of course, we also buy your used truck, even without you purchasing a vehicle from us. Installment plan & financing on favorable terms are available on request. We will be happy to advise you competently and in detail about our vehicles. Sideshift, 3rd valve, 4th valve, rear working lights, front working lights, load guard, full free lift, CE certificate, rotating beacon, single pedal, 3-wheel, seat,