Used A+B Fastech Fp 20 for sale (21)

Condition: new, width of the strips 100 mm band length 920 mm band speed 7.0 m/sec loading area 300 x 150 mm motor 0.44 KW motor 220 Volt range L-W-H 470 x 370 x 210 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base Fodpoxaatujfx Aarjfw - Connection cable + plug - Instruction manual in German

Condition: new, width of the strips 300 mm band length 2070 mm band speed 7.0 m/sec surface of working table 750 x 380 mm diameter 87.7 Führungsrollen mm engine output 1.5 kW Ffedpfx Aaexaapierjw total power requirement 400 Volt weight of the machine ca. 88.0 kg. range L-W-H 1050 x 600 x 400 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: as good as new (ex-display), Year of construction: 2023, bending diam. - max. 36.0 mm ST cutting thickness max. 36.0 mm ST motor 1450 U/min oil volume 32.0 l motor 380 Volt 50 Hz total power requirement 5.5 kW weight 650 kg range L-W-H 1470 x 1200 x 1020 mm Exhibition machine - NEW (!!) Equipment: - Maximum performance, minimum consumption - hydraulic combination machine for bending and cutting processes * for e.g. structural steel or solid material - Bending mode with 3x different angle settings - manual and automatic mode selectable - simultaneous bending and cutting processes when the machine is in operation - "ECO mode" = hydraulic pump only runs when the foot switch is pressed - freely movable foot switch - operating instructions technical data: - steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm * for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm - steel 65 kg / mm² .. bending Ø 32.0 mm / cutting Ø 32.0 mm * for 2 pieces - steel 65 kg / mm² .. bending Ø 18.0 mm / cutting Ø 20.0 mm - steel 85 kg / mm² .. bending Ø 26.0 mm / cutting Ø 28.0 mm * for 2 pieces - steel 85 kg / mm² .. bending Ø 14.0 mm / cutting Ø 18.0 mm Ffjdpsxabntofx Aarjw * Machine video: ?v=zagTSA81VyA

Condition: new, roll diameter 51 mm Wheel width 125 mm weight 20 kg height adjustment 560-975 mm Furnishing: - Heavy three-sprue design for maximum loads - Roller support steplessly height adjustable and clampable - Safe workpiece support - Solid and heavy-duty galvanized steel rollers - With two rollers, each 125 mm long, ideal for pipes, ... techn. Data : Roll width 2 x 125 mm Roll diameter 51 mm Height adjustment 560 - 975 mm Load capacity, max. 700 kg Standpipe diameter 74/52 mm Weight approx. 20 kg Ffedpfow U U U Rjx Aarow

Condition: new, width of the strips 45.0 mm band length 850 mm band speed 8.0 m/sek. voltage 230 V Fjdpfexaanrex Aarofw total power requirement 0.18 kW MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: new, roll diameter 51 mm Wheel width 350 mm weight 20 kg height adjustment 575 - 975 mm Fsdpfx Aaexaaiverefw Load capacity per arm max. 700 kg Furnishing: - Safe workpiece support - by massive and heavy-duty galvanized steel rollers - Roller support steplessly height adjustable and clampable - Problem-free and efficient material transport for the supply and removal of workpieces techn. Details: - Load capacity, max. 700 kg - Standpipe diameter 74/52 mm

Condition: new, width of the strips 100 mm band length 920 mm band speed 7.0 m/sec loading area 300 x 150 mm motor 0.44 KW motor 400 Volt range L-W-H 470 x 370 x 210 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop Ffjdexaappepfx Aarew - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: new, width of the strips 200 mm band length 1490 mm band speed 8.0 m/sec motor 400 Volt loading area 500 x 280 mm total power requirement 1.5 kW Dimensions (HxWxD) 750 x 600 x 340 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug Fodpexaapvofx Aarofw - Instruction manual in German

Condition: used, Year of construction: 2006, tank capacity: 10,000 l, GENERAL INFORMATION Equipment: Crane lugs Design: vertical Year of manufacture: 2006 Notes: Only nameplate is available; further technical documentation available; cylinder manhole diameter 600 mm; a DN 50 reducer is flanged to the outlet; an additional identical tank can be provided on request Internal diameter: 2,500 mm Total height: 3,600 mm Location: Bremen Technical documentation: Drawing, TÜV papers Volume: 10,000 liters Cylinder wall thickness: 3 mm Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 1,500 mm Previous application: slurry TANK Max. allowable operating temperature: 80 °C Specific gravity of medium: 1.4 (to/m³) Support design: height-adjustable legs Number of legs: 3 pcs. EQUIPMENT Manhole / Dome: in cylinder, in top head (Ø 430) Outlet: Flange DN80 MATERIAL SPECIFICATION Ffjdpfx Aasycktfsrsw Leg material: stainless steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4 mm

Condition: new, length 1500 x 740 x 780 innen mm weight of the machine ca. ca. 200 kg. For collecting and disposing of bulk goods and industrial waste Furnishing : - Tipping containers - forklift attachments - for in-house storage of bulk goods - powder-coated in standard color - RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges - Container volume: approx. 600 l available for a surcharge: - 2x fixed castors / 1x swivel castor .. 80.00 euros Fedpoxab Iyefx Aarjfw

Condition: new, sheet width 1250 mm thickness at "Niro-steel" 0.80 mm VA plate width at 30 kg/mm 2.00 mm ALU plate thickness 1.25 mm ST daylight opening 100 mm bending angle max. 135 ° height OW 100 mm total power requirement manuell weight of the machine ca. 350 kg. dimensions of the machine ca. 1715 x 750 x 1400 mm Equipment: - robust, manual swivel bending machine - divided upper work - lower and rear tool * Height of upper tool = 100 mm * Division 100/100/100/100/100/100/100/100/100/70/60/50/40/30/100 Ffsdpfexabmpjx Aarjw * left + right with horn tool - upper tool with quick-change system - quick foot clamp - angle stop - lockable - manual rear stop 500 mm - machine is movable (rollers) - accessories box - rear

Condition: new, length 1500 x 740 x 780 innen mm weight of the machine ca. ca. 200 kg. Ffodpoxab Itjfx Aarsw For collecting and disposing of bulk goods and industrial waste Furnishing : - Tipping containers - forklift attachments - for in-house storage of bulk goods - powder-coated in standard color - RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges - Container volume: approx. 600 l available for a surcharge: - 2x fixed castors / 1x swivel castor .. 80.00 euros

Condition: new, length 1500 x 740 x 780 innen mm weight of the machine ca. ca. 200 kg. For collecting and disposing of bulk goods and industrial waste Furnishing : - Tipping containers - forklift attachments - for in-house storage of bulk goods - powder-coated in standard color - RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges - Container volume: approx. 600 l available for a surcharge: - 2x fixed castors / 1x swivel castor .. 80.00 euros Ffsdpoxab Imefx Aarjw

Condition: new, sheet width 1050 mm plate thickness 1.50 mm daylight opening 100 mm bending angle max. 135 ° height OW 100 mm total power requirement manuell weight of the machine ca. 330 kg. dimensions of the machine ca. 1600 x 900 x 1450 mm Equipment: - robust, manual swivel bending machine - divided upper tool - lower and rear tool * Height of upper tool = 100 mm * Division 100/100/100/100/100/100/100/70/60/50/40/30/100 * left + right with horn tool Ffodpjxaa T Usfx Aarsw - upper tool with quick-change system - quick foot clamp - angle stop - lockable - manual rear stop 500 mm - machine can be moved (rollers) - accessories box - rear * Pictures show identical machine (UFA 1212)

Condition: used, Year of construction: 2006, tank capacity: 10,000 l, GENERAL INFORMATION Equipment: Crane lugs Design: Vertical Year of manufacture: 2006 Remarks: Nameplate no longer available; cylinder manhole diameter 600 mm; minor dent on the side of the vessel Internal diameter: 2,500 mm Total height: 3,800 mm Power: 3 kW Top head: Flat bottom Agitator: Beam agitator Support design: Height-adjustable feet Location: Outdoor storage Technical documentation: Drawing Volume: 10,000 liters Cylinder wall thickness: 3 mm Product-contact material: V4A 1.4401/04 (AISI316) Condition: Used Cylindrical height: 2,000 mm Last product processed: Sludge VESSEL Max. allowable operating temperature: 80 °C Specific gravity of medium: 1.8 (to/m³) Bottom head: Conical bottom Number of feet: 3 pcs EQUIPMENT Manhole/Dome: In cylinder, in top head (Ø 430 mm) Outlet: Flange DN80 Note: Minor residues MATERIAL SPECIFICATION Ffsdpfx Aaex Dmbasrsw Foot material: Stainless steel AGITATOR 1 Agitator manufacturer: Fluid Voltage: 380/660 volts TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4 mm Agitator positioning: Eccentric in top head

Condition: excellent (used), For sale: professional tool holder from the renowned brand WNT Germany – model B40 ER16M A=100. The holder is equipped with a Centro-P Germany HPC16MS-DI precision collet, ensuring maximum accuracy and clamping stability. The set also includes a VHM drill, making it ready for immediate use on a CNC machine. Condition: very good, the holder is fully functional, no play, with normal signs of use. Premium-class equipment – ideal for professional machining centers where precision and reliability are crucial. Fodpfx Aow Rr A Dsarjfw

Condition: used, functionality: fully functional, Year of construction: 2017, machine/vehicle number: 2451648, load capacity: 600 kg, lifting height: 30,150 mm, platform length: 5,800 mm, platform width: 1,200 mm, overall weight: 21,500 kg, transport length: 6,420 mm, transport width: 1,390 mm, transport height: 3,190 mm, fuel type: electric, color: blue, Equipment: UVV, all wheel drive, Technical Data Year of manufacture: 2017 Motor: Electric Working height: 32.15 m Platform height: 30.15 m Platform extension: 1.90 m Platform dimensions: 5.80 x 1.20 m Rated load: 600 kg Travel speed: 0.7 - 3.0 km/h Climbing ability: 25% Ffedpfxjyqzcao Aarsw Dimensions (L x W x H): 6.42 x 1.39 x 3.19 m Fully functional General signs of use

Condition: used, functionality: fully functional, Year of construction: 2018, machine/vehicle number: 2451638, load capacity: 600 kg, lifting height: 30,150 mm, platform length: 5,800 mm, platform width: 1,200 mm, overall weight: 21,500 kg, transport length: 6,420 mm, transport width: 1,390 mm, transport height: 3,190 mm, fuel type: electric, color: blue, operation weight: 21,500 kg, Equipment: UVV, all wheel drive, differential lock, Technical Data Year of manufacture: 2018 Fjdeyqytwspfx Aarjfw Engine: Electric Working height: 32.15 m Platform height: 30.15 m Platform extension: 1.90 m Platform dimensions: 5.80 x 1.20 m Rated load: 600 kg Travel speed: 0.7 - 3.0 km/h Climbing ability: 25 % Dimensions (L x W x H): 6.42 x 1.39 x 3.19 m Fully functional General signs of use

Condition: used, functionality: fully functional, In this offer you buy a used trimmer "Canon 2-Knife Trimmer A1" Object of sale: 1 x Canon 2-knife trimmer A1 suitable for various Canon models. Condition: Ffodpfx Aaswpd Tyorow This offer is for a used device, which may show signs of use (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 10,000 kg, Tyres, wheels and rims Condition: New device Technical condition: New Fodpfjxmb Srox Aarofw Description: We supply rims for all European models and manufacturers.

Condition: used, functionality: fully functional, Year of construction: 2014, load capacity: 230 kg, overall weight: 930 kg, transport length: 1,930 mm, transport width: 790 mm, transport height: 1,910 mm, fuel type: electric, H.A.B. S 66-8-E2WD Scissor Lift Platform / Working Height 6.60 m Self-propelled scissor work platform with battery drive Max. working height: 6.60 m Max. load capacity: 230 kg Platform extension: 0.70 m Gradeability: 20% Colour: orange / green Special feature: non-marking tyres Technically in fully functional condition. Visual condition as shown UVV inspection (safety check) new upon handover Available ex stock Langenhagen Ffjdjw H Rlqjpfx Aarsw All information regarding the machine is supplied without guarantee. Subject to typing errors, mistakes, and prior sale.