Used Af 222 for sale (2,881)

Year of construction: 2005, condition: excellent (used), functionality: fully functional, -Maximum milling cutter diameter: 280 mm Dksdpoyyma Rjfx Acpeu -Milling cutter arbor bore: 40 mm -Feed: manual -Power: 2.5 kW at 400 V/50 Hz -Milling spindle speed: 2,800 rpm -Compressed air connection: 7 bar -Air consumption: 10 liters per working cycle, with minimum quantity lubrication: 20 liters -Length: 1,540 mm, depth: 905 mm, height: 1,200 mm, weight: 248 kg

Condition: used, mileage: 156,461 km, power: 159 kW (216.18 HP), first registration: 10/1987, overall weight: 12,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, Year of construction: 1987, total length: 7,100 mm, total width: 2,500 mm, total height: 3,150 mm, Equipment: ABS, all wheel drive, Very well-maintained water tender LF 20 Superstructure by Rosenbauer with rear-mounted Rosenbauer R280N pump with high-pressure unit, 2800 l/min at 10 bar, 250 l/min at 40 bar. The pump was completely overhauled in 2015 (seals, impellers, guide vanes, bearings, etc.) According to the previous owner, the fire department, the pressure and pumping performance is like new. +++ Water tank 1800 l + 200 l foam tank +++ Special signals with Martin horn, fully functional, good tires 10 R x 22.5, DOT 4412 Chassis MB 1222 with 4x4 all-wheel drive and 2x differential lock, center and rear Rockinger trailer hitch, 13 t towing capacity, braked Djdpfxez Amnkj Acpoku Includes hose reel at the rear (not shown) Fully operational, units and axles are dry Superstructure dimensions: 380 x 2450 x 1700 mm (L x W x H) Superstructure with 2 roof storage compartments and rear ladder New main inspection (TÜV) valid at the time of delivery +++ Errors, changes and prior sale are subject to change +++

Condition: excellent (used), For sale: an industrial KSB ETABLOC-G 32-125.1/222 centrifugal pump with a 2.2 kW electric motor. Pump specifications: • Manufacturer: KSB • Model: ETABLOC-G 32-125.1/222 • Design: G11 • Identification number: 48862594 • Pump number: 5-927-141345/1 • Flow rate: 3–24.5 m³/h • Head: 27.5–17 m • Pump speed: 2900 rpm Motor specifications at 50 Hz: • Motor type: QU FS 90L2A-60 • Motor number: 367694 MX • Power: 2.2 kW • Voltage: 220–240/380–420 V • Current: 7.8–7.2/4.5–4.3 A • Speed: 2850 rpm • cos φ: 0.89 • Protection class: IP55 Dedpfjzva S Aex Acpjku • Insulation class: F • Operating mode: S1 The unit has a sticker from the Elektromotoren Reparaturwerk ROCK specialist service, indicating an inspection carried out in November 2017. The pump and motor were likely refurbished and inspected by a specialist service. Used condition. Normal signs of use and storage are visible. The exact condition is shown in the pictures.

Condition: used, mileage: 31,388 km, power: 160 kW (217.54 HP), first registration: 11/1992, overall weight: 12,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, emission class: euro2, Year of construction: 1992, Equipment: ABS, all wheel drive, navigation system, M-Benz 1224 4x4 RW2 Fire Engine VIN: 5569873 Vehicle ID: 1151324 ????? ????? ??? ????? ?? ????? Chassis / Components: * Wheelbase: 3,600 mm Dkodszxvg Iopfx Acpou * Leaf spring suspension * Tires: 10 R 22.5 * Tire tread depth: Front ~90%, Rear ~80% * 1x Diesel tank * Winch, 60 m / 13mm cable * Trailer coupling Cab: * 3-seater * 2x Rotating beacons Body: * Metz RW2 * Crane type: D20SE * Rotzler winch, 60 m * Lighting mast, 6 m * Generator Engine / Transmission: * 11,309 ccm // 218 hp / 160 kW * 5-speed * Differential lock * Power take-off Weights: * Gross vehicle weight: 12,000 kg * Unladen weight: 8,500 kg * Payload: 3,500 kg Other: * German vehicle * Rescue saw (for metal and glass) New inspections / safety checks or weight adjustments are available upon request. We will gladly assist you in obtaining export / transit license plates; furthermore, we can arrange for the transportation of your purchased vehicles within Germany. Contact us! ----We speak the following languages: German, English, and Russian! ----No liability for printing and typographical errors, changes, sales subject to prior sale, and errors. All rights reserved! ----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them with the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transports We will gladly assist you in organizing special transports. Day passes / Export license plates We will gladly assist you in obtaining export license plates / short-term license plates. Processing of customs formalities We will gladly assist you in handling customs matters.

Condition: used, machine/vehicle number: 160, mileage: 35,020 km, power: 159 kW (216.18 HP), first registration: 03/1984, fuel type: diesel, empty load weight: 8,380 kg, maximum load weight: 4,520 kg, overall weight: 12,900 kg, tire size: 10 r22,5, axle configuration: 4x4, wheelbase: 3,600 mm, brakes: engine braking, color: orange, gearing type: mechanical, suspension: steel, loading space length: 3,600 mm, loading space height: 1,400 mm, Equipment: additional headlights, all wheel drive, differential lock, hydraulics, trailer coupling, Displacement 10,888 ccm Bachert body 9 seats Dkodsqzi S Rspfx Acpou WITHOUT air connections for trailer VIN-No. 065628 Errors excepted

Condition: excellent (used), For sale: a used KSB ETABLOC-GN 32-125/222 industrial centrifugal pump with a 2.2 kW electric motor. The pump has been inspected and is in full working order. It is in used condition, with normal signs of wear and tear, as well as some localized surface corrosion on the flanges and housing. The photos provide a detailed view of its condition. Pump technical data: Manufacturer: KSB Model: ETABLOC-GN 32-125/222 Design: GN11 Identification number: 48861776 Number: 5-925-204037/1 Capacity: 4–30 m³/h Head: 25–18 m Dodpezvhq Hefx Acpeku Rotational speed: 2900 rpm Approximate weight of the complete unit: 39.5 kg Motor data: Manufacturer: KSB Type: OU FA 90L2A-60 Power: 2.2 kW Power supply: three-phase Voltage: 220–240 / 380–420 V Frequency: 50 Hz Rotational speed: 2850 rpm Protection class: IP55 Insulation class: F cos φ: 0.89

Condition: excellent (used), For sale: an industrial KSB ETABLOC-G 32-125/222 centrifugal pump with a 2.2 kW electric motor. Dodpfx Acjzvhn Espoku The pump has been inspected and is in good working order. Pump technical specifications: Manufacturer: KSB Model: ETABLOC-G 32-125/222 Identification number: 48862622 Flow rate: 4–30 m³/h Head: 25–18 m Pump speed: 2900 rpm Additional type: G32-125/22 2 Number: 198057/6 Motor specifications: Power: 2.2 kW Power supply: three-phase Voltage at 50 Hz: 220–240 / 380–420 V Speed: 2850 rpm Frequency: 50 Hz Power factor: cos φ 0.89 Protection class: IP55 Insulation class: F

Condition: excellent (used), For sale: a KSB ETACHROM BC 025-125/222 centrifugal pump equipped with a Siemens electric motor. The pump is made of stainless steel and is designed for industrial applications. The entire unit is mounted on a base. Pump specifications: Manufacturer: KSB Aktiengesellschaft Model: ETACHROM BC 025-125/222 Flow rate Q: 11.00 m³/h Head H: 25.39 m Rotational speed: 2880 rpm Year of manufacture: 2007 Dsdpfx Acjzvqplopsku Material No.: 00 117 385 Serial No.: 9971266604 000100 01 Flanged connections Motor: Siemens Total weight of the unit: approx. 31 kg The unit has a sticker from the German electric motor repair company ROCK Elektromotoren Reparaturwerk, indicating that it has been inspected in accordance with VDE, UVV, VBG 4, and DIN standards. The pump is used and in very good visual condition. Its condition and completeness are exactly as shown in the photos. A robust industrial pump from the renowned manufacturer KSB.

Condition: used, Year of construction: 2010, functionality: fully functional, grinding spindle speed: 8,000 rpm, grinding spindle motor power: 12 W, Machine in functional condition and can be under power and tested. Dkodpfez Ea Hpjx Acpeu

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: serie nr 3149, overall weight: 11,800 kg, total width: 6,615 mm, total length: 8,890 mm, total height: 2,050 mm, spindle diameter: 50 mm, type of input current: three-phase, space requirement length: 16,000 mm, space requirement width: 8,000 mm, milling spindle length: 650 mm, compressed air connection: 8 bar, spindle speed (min.): 3,500 rpm, spindle speed (max.): 3,500 rpm, length stop: 3,450 mm, input voltage: 125 V, power: 65 kW (88.38 HP), main saw diameter: 450 mm, corner unit for window and door frames, including tools. controlled from the office (Groeneveld). interpolation (angled pins). barcode laser. return transport. documentation available. complete sets of spare blades/saws, including router bits, linked to Groeneveld. Dkedpfxsztptqs Acpeu automatic counter-piece. maximum workpiece length 6000. sticker printer for barcode. automatic waxelite pump. automatic central lubrication. connections for pin holes and counter-molds. automatic length stop and rotation for workpieces. including extraction pipes with automatic valve. thicknesses from 38 to 150 mm. pin bank: 1x saw blade 40mm. 2x pin shaft 50x650. 2x edge breaker 30x40. router: 1x rounding router 30x40. 3x router bits 50x600. machine can be picked up here; in conjunction with Bos Machines (dismantling and transport not included in the price). price excludes VAT.

Condition: used, Year of construction: 2000, functionality: fully functional, USED AUTOMATIC ROTARY SAW, SCORTEGAGNA RUSCH 260/320 AF, overhauled like new. READY IN STOCK Dkjdpfjzhui Tjx Acpou

Condition: used, mileage: 26,437 km, power: 159 kW (216.18 HP), first registration: 10/1988, fuel type: diesel, overall weight: 12,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, total width: 2,500 mm, total height: 3,090 mm, Equipment: compressor, Errors and prior sale excepted! Internal number: 1187.5371818 ---- EQUIPMENT Dkjdpfx Aoim Tvxscpsu * All-wheel drive with locking differentials * Rear-mounted pump for tank filling and suction operation * Fire engine LF16 * Unladen weight: 7755 kg * Length: 7150 mm * 2 rotating beacon lights at the front * 1 rotating beacon light at the rear * Front flashing beacon * Martin horn system * External compressed air connection * Snow chains * Mount for 2 self-contained breathing apparatus (SCBA) inside * Mount for 4 SCBA, pivotable in the equipment compartment * Drawer for rescue kit or portable pump on the side * Mount at the rear for mobile hose reel * Pump can be switched on from the rear * Generator 380 volts 3-5.7 A, 220 volts 1-11.5 A * Further equipment and condition, see pictures ---- The vehicle has not been refurbished! Nationwide delivery possible for an additional charge. Errors and prior sale excepted. We will gladly accept your vehicle in trade. Financing / leasing also possible without a down payment! Do you have any further questions? We will be happy to advise you!

Condition: used, Year of construction: 2009, functionality: fully functional, input voltage: 400 V, year of last overhaul: 2025, total length: 4,000 mm, total width: 2,000 mm, total height: 2,000 mm, input frequency: 50 Hz, control cabinet length: 400 mm, control cabinet height: 800 mm, Fully operational and currently in production. Machine can be inspected and tested with dough. 6 removable bowls included. The mixer is located in Romania, Arad County, Pâncota, at Nicola SABB Bakery, where it can be seen in operation. More details are available by phone or WhatsApp. Videos of the mixer in operation can also be provided upon request. Main Features Dksdpfx Aex Ta U Uecpou • Mixing capacity: up to approx. 300 kg dough / 180–190 kg flour • Type: Double-spiral mixer with 6 removable bowls • Digital control panel with program management • Two mixing speeds: slow and fast • Manufactured in Germany (DIOSNA – Dierks & Söhne GmbH) • Very quiet and stable, equipped with safety cover sensor and automatic stop • Power supply: 400 V / 50 Hz / three-phase • Total power: 49 kW • Year of manufacture: 2009 Technical Condition Fully operational and currently in use for bread and bakery production. Owned and operated by our bakery since new (2009).

Condition: used, functionality: fully functional, Year of construction: 2003, ALLOY CUTTING MACHINE, used AUTOMATIC, IMET VELOX 350 AF-E. FULLY OVERHAULED Djdpfxozh Ugfs Acpsku

Year of construction: 2020, condition: ready for operation (used), A comprehensive machine package for textile processing, automatic cutting, laser cutting, industrial sewing operations, punching and riveting is offered. 1) CNC cutting table Atom FlashCut 222, year of manufacture 2020, machine weight: approx. 650kg, the machine will be available at the end of 2026. 2) CO₂ laser cutting and engraving machine Trotec Rayjet 50 with associated extraction system, working area: approx. 457mm/305mm, laser power: 30W, max. processing speed: approx. 1.5m/s, Aigner/Trotec Atmos Cube extraction system, year of manufacture: 2020, airflow: 320m³/h. 3) Single-needle lockstitch flatbed machine with triple feed and large vertical hook Dürkopp Adler 867 ECO, subclass 867-190020-M, max. stitch length: approx. 9mm, clearance: approx. 335mm, clearance height: approx. 125mm. 4) Single-needle high-speed lockstitch machine Juki DDL-9000B-SS, year of manufacture 2019, max. sewing speed: approx. 5000stitches/min, max. stitch length: approx. 5mm, needle bar stroke: approx. 30.7mm. 5) Single-needle high-speed lockstitch machine Dürkopp Adler 261-140342-02, max. stitch length: approx. 5mm, control: AHE59. 6) Post-bed sewing machine Pfaff 591-900/81-BL. 7) 2x identical swing-arm cutting presses Moneus 1333. 8) 5-thread overlock machine Chee Siang Golden Wheel CSK-2516D-03/S35-3x5. 9) Manually operated riveting and setting machine with mechanical foot operation. 10) Rotary screw compressor Kaeser Aircenter SM 13, year of manufacture: 2020, motor power: 7.5kW, max. operating pressure: 11bar, motor speed: 2955rpm, control: Kaeser SIGMA CONTROL 2. Documentation available. Inspection possible by appointment. Dsdpezt Skxofx Acpsku

Year of construction: 2013, condition: like new (used), functionality: fully functional, Trepko 222-1K rotary filling machine whit 2x moulds. Previously filling yoghurt products and other dairy products. Dodpfsydplcjx Acpjku Mould No 1. Diameter 185 mm No 2. 90 mm. Year of construction 2013.

Condition: ready for operation (used), functionality: fully functional, CNC FLOOR TYPE BORING MACHINE MAKE TITAN MOD. AF 150 SPINDLE SIZE 150MM, ISO 50 X TRAVEL 3000MM Y TRAVEL 2000MM W TRAVEL 800MM ROTARY TABLE 2000 X 1700 MM Dkedpfx Acsztq Ayjpsu ROTRARY TABLE TRAVEL 1000MM LOADING CAPACITY ON TABLE 15 TON CNC NUM

Year of construction: 2017, condition: like new (used), Used industrial X-ray system Manufacturer: VisiConsult Type: XRH 222-S Year of manufacture: 2017 X-ray voltage: 225 kV Equipment: CT and ADR expansion Workpiece dimensions: max. 650 × 860 mm Workpiece weight: max. 120 kg The system is designed for industrial X-ray inspection and features CT and ADR functionality. Further technical data and information available upon request. Dedpfx Acezttg Ispoku

Condition: used, mileage: 29,680 km, power: 159 kW (216.18 HP), first registration: 01/1989, fuel type: diesel, empty load weight: 8,060 kg, maximum load weight: 3,940 kg, overall weight: 12,000 kg, tire size: 10R22.5, axle configuration: 4x4, wheelbase: 3,600 mm, brakes: engine braking, color: red, driver cabin: other, gearing type: mechanical, emission class: none, suspension: steel, number of seats: 6, Equipment: all wheel drive, cabin, differential lock, fog lights, trailer coupling, Vehicle location: Bovenden, Doka, 1x air seat, switch 5, ABS (anti-lock braking system), auxiliary drive, differential lock, fog lights, rotating beacon, storage box, leaf springs, trailer coupling Wheelbase: 3600 mm Construction: Ziegler tank fire engine LF 16 TS Spare wheel available for an additional charge! Djdpfx Acovu D Atspjku Sales to businesses or exports are subject to 19% VAT! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: excellent (used), Year of construction: 1962, functionality: fully functional, pressing force: 200 t, stroke length: 800 mm, table width: 970 mm, table length: 1,600 mm, year of last overhaul: 2022, die cushion force: 40 t, Equipment: safety light barrier, Lasco FP 222 S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2022. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Lasco FP 222 S press Dkodpev E Efdjfx Acpeu A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2022. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: used, machine/vehicle number: XLWRT223XB1580957, Year of construction: 2011, operating hours: 18,462 h, fuel type: diesel, Year of manufacture: Jun 2011 Dkodpfxoz I A Sgs Acpsu Production country: NL Please contact Theo Lelie , , ) for more information

Year of construction: 2023, condition: excellent (used), Number of NC axes: 4 X-axis: 7200 mm Dsdozycltspfx Acpoku Maximum tool length: 190 mm Number of tool positions in the tool magazine: 12 Number of clamping mandrels: 8 Number of fixed stops for profiling: 4 Clamping block positioning: Automatic Maximum profiling height: 300 mm Motor power: 7.5 A-axis: +/-90° continuous

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 2808, total height: 2,400 mm, total length: 3,300 mm, total width: 2,200 mm, feed length X-axis: 450 mm, feed length Y-axis: 250 mm, feed length Z-axis: 350 mm, overall weight: 7,000 kg, travel distance X-axis: 450 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, CNC grinding center for external, internal, and profile grinding with three linear axes and a swiveling grinding head. Modularly configurable for various grinding tasks, featuring automated dressing cycles, modern control system, tool management, and options for measurement systems as well as peripherals such as coolant treatment and extraction. Dksdpfxoxuiche Acpsu

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Manufacturer: Bacciotini Machine Type: Pit Stop AF Speed Max. Sheet Size: 50 x 85 cm Min. Sheet Size: 10 x 15 cm Year of Manufacture: 2009 Status: available Condition: Good Dkjdjzrtyrspfx Acpsu Available: Immediately

Condition: used, mileage: 109,575 km, power: 159 kW (216.18 HP), first registration: 05/1984, fuel type: diesel, empty load weight: 8,500 kg, maximum load weight: 4,800 kg, overall weight: 13,300 kg, tire size: 10R22.5, axle configuration: 4x4, wheelbase: 3,600 mm, color: red, driver cabin: other, gearing type: mechanical, emission class: none, suspension: steel, number of seats: 6, Equipment: additional headlights, all wheel drive, cabin, differential lock, fog lights, trailer coupling, Vehicle location: Bovenden, Doka, 1x air seat, switch 5, auxiliary drive, differential lock, fog lights, rotating beacon, storage box, leaf suspension Wheelbase: 3600 mm Body: LHF 16 fire-fighting support vehicle with Bachert body, FP 16/8 egg pump, 1600 l water tank & 400 l foam tank Body length approx. 3700 mm! The sale to tradesmen or export is subject to 19% VAT! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Dkjdpjvhlihjfx Acpju - .