Used Ng 200 for sale (132,354)

Condition: good (used), Year of construction: 2001, Machine is in good condition. Fpedpfx Agjrpk Rmodob Parts shown by hand not come. Cutting tools not come.

Condition: good (used), The scope of delivery includes: Fjdpji Hph Sjfx Agdspb 01x shelf connector, used Material color: orange Manufacturer: Vogelsang Type: NS suitable for frame profile width: approx. 100 mm for shelf distance: approx. 200 mm dim. head plates: 128 x 90 mm profile dim.: C 46 x 23 mm Weight: approx. 1,200 kg | pcs. General information about the article: This article is offered for pick-up only. Any additional transport or shipment of this article is associated with additional costs, which can be requested separately from us. depending on the delivery location or scope of delivery can be requested from us.

Condition: new, functionality: fully functional, color: yellow, Year of construction: 2026, Our stationary crushing and screening plant, with a capacity of 200-350 tons per hour, consists of a 30 m³ vibrating feeding bunker, mid-screen, CLK-110 jaw crusher, cone crusher, vertical shaft impact crusher, stock and return conveyors, control cabin, and automation system. Products transferred to the feeding bunker are separated from dirt and mud using the intermediate screen and are bypassed with a bypass conveyor. The material above the screen goes to the jaw crusher, while the products on the second level drop onto the jaw discharge conveyor, and the products on the lowest level are discarded as bypass. The jaw crusher has a maximum feeding capacity of 800 mm and crushes the products, which first go to the washing screen. Here, the finest products are sent to the stock area with a screw washer, and the other products are sent to the cone crusher. The products coming out of the cone crusher are directed to the other screen and the vertical shaft impact crusher, allowing the desired products to be obtained from the final screen at high quality. TBX-30 Vibrating Feeding Bunker Fpedpfxowxd E Ij Agdjb CLK-110 Jaw Crusher TE-2060x3 2000x6000 3-Deck Vibrating Washing Screen HY-800 8000x8000 Screw Washer 20m3 Cone Crusher Feeding Bunker CC-300 Cone Crusher 20m3 Vertical Shaft Impact Crusher Feeding Bunker VSI-900 Vertical Shaft Impact Crusher TE-2060x4 2000x6000 4-Deck Vibrating Screen TE-2060x3 2000x6000 3-Deck Vibrating Screen Conveyor Belts, Control Cabin, Electrical Panel, and Automation System

Condition: like new (used), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, overall weight: 450 kg, total length: 1,600 mm, total width: 1,100 mm, total height: 1,700 mm, power: 7.5 kW (10.20 HP), type of input current: three-phase, We are selling a pulverizer that was previously used for fine grinding trials in the food sector. The machine is robust, reliable and powerful. Technical data + Power: 7.5 kw + Processing capacity: 20-50 kg per hour + Weight: 450 kg Using liquid nitrogen, the machine is immediately ready for use simply plug it in and get started. It is still in mint condition and can be viewed by appointment. be inspected by appointment. The machine is sold plus 19% sales tax. Fpodeudvt Repfx Agdob If you are interested or have any questions, we look forward to hearing from you.

Condition: good (used), The scope of delivery includes: 01x shelf connector, used Fpodpsk Iuhfjfx Agdjb Material color: blue Manufacturer: Feralco for shelf distance: approx. 200 mm total length: approx. 200 mm profile dim.: approx. 20 x 20 mm head plate: approx. 100 x 40 x 4 mm Drill hole Ø: approx. 9 mm (2 pcs. per side) Weight: approx. 0,41 kg | pcs.

Condition: new, functionality: fully functional, color: yellow, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO MEY Series mobile sand screening and washing plant is an ideal solutions for the classifying and washing of materials which was provided as pre-crushed. Most important advantage of plant is having all equipment on only a single chassis. Transportation can be done by only one truck. TECHNICAL SPECIFICATIONS: - Hopper: 8 m3 - Plant Dimensions: 13500x4500x3600 mm - Production Capacity: 120-200 Tons Per Hour - Screw Washer Size: 600x6000 mm Double Helix - Vibrating Screen and Deck: 1600x4500 (4 decks) - Total Motor Power: 68 Kw - Generator (optional): 130 kvA MEY-1645 IS A COMBINATION OF: • Bunker(Hopper) • Vibrating Screen with Washing Nozzles • Double Helix Screw Washer • Folding type feeding and stock conveyor belts Fpjdpfxew Axd Tj Agdob • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), Wolfking SFG 850/200 Grinder Manufacturer: Wolfking Power Supply: 22 kW Head: 200 mm Hopper Capacity: 850 liter Fpedjucdidopfx Agdjb Capacity: +/- 6.000 kg/hour Machine Dimensions LxWxH: 1.600x1.700x2.100 mm Machine Weight: 1.000 kg.

Condition: excellent (used), Year of construction: 2007, screw diameter: 55 mm, displacement volume: 618 cm³, injection pressure: 2,183 bar, injection weight: 562 g, mold height (min.): 400 mm, ejector stroke: 180 mm, Engel VC 1350/200 Tech Clamping force: 200 tons Year of manufacture: 2007 Weight: 14,200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Injection unit: .../1350 Screw diameter: 55 mm Injection volume: 618 cm³ Shot weight (for PS): 562 g Fpjdpfx Agjx Az Ekjdjb Specific injection pressure: 2,183 bar Mould clamping system: 200/... Mould platen dimensions: 860 x 570 mm Mould installation height: 400 mm Opening stroke: 750 mm Maximum platen distance: 1,150 mm Ejector stroke: 180 mm Ejector force: 80 kN Equipment: - 2 × hydraulic core on moving platen - Pneumatic valve - 8 hot runner zones - 8-section rotameter

Condition: excellent (used), COMPLETE TETRA PAK LINE MODEL TBA9 200ml SLIM FILLER TBA9/200S V130, YOM 1993, 52.000 RUNNING HOURS TUBEX STRAW APPLICATOR Fpjdpfovvn Ayox Agdjb TETRA PACKER TCBP70 WRAP AROUND TETRA MULTISHRINK 51, packing 2X3 CONVEYORS SYSTEM THE LINE IS STILL IN PRODUCTION

Condition: excellent (used), Year of construction: 2020, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 014707, clamping force: 350 kN, As new! Fully functional machine. Extensive equipment: 2x limit switches / 2x air blow valves / EM13 / interface for water temperature control units / bi-metal / separating flap / B&R Smartmold control unit. Fpjdoxtmrdspfx Agdob

Condition: used, twin shaft paddle mixer mixer capacity 1.250 L. 200 mm – head with tool trolley all stainless steel dimensions mixer (l x w x h) : ± 2.350 x 2.000 x 2.600 mm loading height : 2.200mm pneumatic lid Fpodow Ug D Depfx Agdjb

Year of construction: 1993, condition: used, functionality: fully functional, Complete Möhringer MN 180/200 resaw line. Cutting height 180 mm. 4 adjustable saws. With infeed/outfeed. Used. Already dismantled. Good condition. Sale on behalf of customer. Fedpfxjxcidne Agdjpb

Condition: good (used), TECHNICAL INFORMATION: Grinding wheel dimensions (od x id x width): Ø508xØ304.8x204 mm Regulating wheel dimensions (od x id x width): Ø304.8xØ152.4x204 mm Manual plongeé Main engine power: 20 Kw Voltage: 380 V Fedperpnf Rjfx Agdspb Height: 1700 mm Length: 2000 mm Width: 1080 mm Weight: 4315Kg approx. machine + 60 Kg drawer

Year of construction: 1972, condition: good (used), 23 rolls, Ø 16 mm strip width: 170 mm strip thickness: 0,2 - 1,3 mm Fodpfxjbif Dyj Agdepb

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Fpedpfx Agewc Rk Ejdsb Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: ready for operation (used), A Peddinghaus 214/200 billet shear is available. Cutting capacity: square: 70mm, round: 80mm, flat: 180mm x 35mm/250mm x 28mm, weight: approx. 5000kg. Fsdpfxottv Tvs Agdspb

Condition: good (used), Year of construction: 2002, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The Fedpfx Agsw N S E Aedspb measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, clamping force: 500 kN, screw diameter: 25 mm, displacement volume: 59 cm³, injection pressure: 2,400 bar, warehouse no.: 503653 manufacturer: ENGEL type: e-max 200-50 controller: year of construction: 2011 clamping force: 500 kN distance between tie-bars h x v: 370 x 320 mm size of mould plates h x v: 520 x 470 mm min. mould height: 150 mm max. mould height: 350 mm max. open daylight: 610 mm opening stroke: 260 mm screw diameter: 25 mm swept volume: 59 ccm injection pressure: 2400 bar equipment included screen text german Fjdjx R Sm Dopfx Agdspb CEE-socket 16A air valve 1x machine without material hopper machine without hopper loader Anti vibration mounts interface robot EUROMAP 67 Schuko-socket 10A measures of machine l x w x h: 3.7m x 1.32m x 1.8m total weight: 3400KG

Condition: good (used), bench vice, metalworker's vice, parallel vice Fpsdpfeddfh Ejx Agdsb -Jaw width: 150 mm -Wingspan: 200 mm -Number: 2x vices available -Price: per piece -Dimensions: 490/340/H195 mm -Weight: 27 kg

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Fjdpshvz D Hsfx Agdspb Mr.: Simon Blank Included in delivery: 01x CS Sigma profile, used Material color: sendzimir galvanized profile length: approx. 1.750 mm CS Sigma: approx. 200 x 65 x 18 mm material thickness: approx. 1,50 mm weight / pcs.: approx. 7,950 Kg Remark: The pictured angles are not part of the offer. General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Year of construction: 2004, condition: used, z-travel 200 mm clamping diameter of cutter heads max. 550 mm max. permissible cutter head weight 150 kg mounting plaute diameter for cutter heads 360 mm taper for cutter heads, nominal diameter 500 mm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m Cutter Head Set-Up- and -Measuring Machine In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in dry milling, high gear cutting quality and a long service life can only be achieved with precisely adjusted cutterheads. Fjdpfevq Sd Rox Agdopb The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: good (used), Year of construction: 2004, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. Fedpjul Efmsfx Agdspb The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: good (used), Year of construction: 2011, operating hours: 32,000 h, functionality: fully functional, clamping force: 280 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,065 bar, total length: 3,200 mm, total width: 1,350 mm, total height: 1,850 mm, overall weight: 2,900 kg, Equipment: documentation/manual, warehouse no.: 503562 manufacturer: ENGEL type: Victory 200-28 Tech controller: CC200 year of construction: 2011 clamping force: 280 kN size of mould plates h x v: 500 x 400 mm Fpsdsx Rx Easpfx Agdeb min. mould height: 150 mm max. open daylight: 550 mm opening stroke: 400 mm screw diameter: 30 mm swept volume: 99 ccm injection pressure: 1450 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 2x machine incl. belt conveyor LxW: 2800mm x 350mm Discharge height: 950mm Speed: 9m/min machine incl. Handling machine incl. water flow regulator Anti vibration mounts interface for ejector plates safety interface for temperature control units Schuko-socket 10A selection unit measures of machine l x w x h: 4.4m x 1.9m x 2.1m total weight: 2900KG technical data robot-system handling type: Linear manufacture: ENGEL controller: Viper 6 year of construction: 2011 electric cabinet dimensions: 1,00m x 0,35m x 0,64m

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery: 01x CS Sigma profile, used material color: sendzimir galvanized profile length: approx. 1.650 mm CS Sigma: approx. 200 x 65 x 18 mm material thickness: approx. 1,50 mm weight / pcs.: approx. 7,500 Kg Remark: The pictured angles are not part of the offer. General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item or a shipment of this article is associated with additional costs, which can be requested separately Fpsdpfx Aehwduxegdob depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: like new (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery: 01x CS Sigma profile, used material color: sendzimir galvanized profile length: approx. 1.400 mm CS Sigma: approx. 200 x 65 x 18 mm material thickness: approx. 1,50 mm weight / pcs.: approx. 6,500 Kg Remark: The pictured angles are not part of the offer. General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet Fpedpfx Ashwdu Hjgdeb (without unloading)